[PATCH v2 2/7] drm/i915/dp: Ensure the FEC state stays disabled for UHBR links

[Imre Deak <imre.deak@intel.com>]

Atm, in the DP SST case the FEC state is computed before
intel_crtc_state::port_clock is initialized, hence intel_dp_is_uhbr()
will always return false and the FEC state will be always computed
assuming a non-UHBR link.

This happens to work, since the FEC state is recomputed later in
intel_dp_mtp_tu_compute_config(), where port_clock will be set already,
so intel_crtc_state::fec_enable will be reset as expected for UHBR. This
also depends on link rates being tried in an increasing order (i.e. from
non-UHBR -> UHBR link rates) in dsc_compute_link_config(), thus
intel_crtc_state::fec_enable being set for the non-UHBR rates and
getting reset for the first UHBR rate as expected.

A follow-up change will reuse intel_dp_fec_compute_config() for the DP
MST state computation, prepare for that here, making sure that the
function determines the correct intel_crtc_state::fec_enable=false state
for UHBR link rates based on the above.

The DP SST and MST state computation should be further unified to avoid
computing/setting the intel_crtc_state::fec_enable state multiple times,
but that's left for a follow-up change. For now add only code comments
about this.

Signed-off-by: Imre Deak <imre.deak@intel.com>
---
 drivers/gpu/drm/i915/display/intel_dp.c     | 10 +++++++---
 drivers/gpu/drm/i915/display/intel_dp_mst.c |  5 +++++
 2 files changed, 12 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
index 1d3ca1970f25f..b523c4e661412 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -2368,6 +2368,9 @@ static int intel_edp_dsc_compute_pipe_bpp(struct intel_dp *intel_dp,
 static void intel_dp_fec_compute_config(struct intel_dp *intel_dp,
 					struct intel_crtc_state *crtc_state)
 {
+	if (intel_dp_is_uhbr(crtc_state))
+		return;
+
 	if (crtc_state->fec_enable)
 		return;
 
@@ -2379,9 +2382,6 @@ static void intel_dp_fec_compute_config(struct intel_dp *intel_dp,
 	if (intel_dp_is_edp(intel_dp))
 		return;
 
-	if (intel_dp_is_uhbr(crtc_state))
-		return;
-
 	crtc_state->fec_enable = true;
 }
 
@@ -2400,6 +2400,10 @@ int intel_dp_dsc_compute_config(struct intel_dp *intel_dp,
 	bool is_mst = intel_crtc_has_type(pipe_config, INTEL_OUTPUT_DP_MST);
 	int ret;
 
+	/*
+	 * FIXME: set the FEC enabled state once pipe_config->port_clock is
+	 * already known, so the UHBR/non-UHBR mode can be determined.
+	 */
 	intel_dp_fec_compute_config(intel_dp, pipe_config);
 
 	if (!intel_dp_dsc_supports_format(connector, pipe_config->output_format))
diff --git a/drivers/gpu/drm/i915/display/intel_dp_mst.c b/drivers/gpu/drm/i915/display/intel_dp_mst.c
index f2266b2653046..27e952a67c343 100644
--- a/drivers/gpu/drm/i915/display/intel_dp_mst.c
+++ b/drivers/gpu/drm/i915/display/intel_dp_mst.c
@@ -293,6 +293,11 @@ int intel_dp_mtp_tu_compute_config(struct intel_dp *intel_dp,
 		mst_stream_update_slots(crtc_state, mst_state);
 	}
 
+	/*
+	 * NOTE: The following must reset crtc_state->fec_enable for UHBR/DSC
+	 * after it was set by intel_dp_dsc_compute_config() ->
+	 * intel_dp_fec_compute_config().
+	 */
 	if (dsc) {
 		if (!intel_dp_supports_fec(intel_dp, connector, crtc_state))
 			return -EINVAL;
-- 
2.49.1