From: "Souza, Jose" <jose.souza@intel.com>
To: "intel-gfx@lists.freedesktop.org"
<intel-gfx@lists.freedesktop.org>,
"Deak, Imre" <imre.deak@intel.com>
Cc: "Zanoni, Paulo R" <paulo.r.zanoni@intel.com>,
"Vivi, Rodrigo" <rodrigo.vivi@intel.com>
Subject: Re: [PATCH 3/5] drm/i915/cnl+: Verify combo PHY HW state during PHY uninit
Date: Fri, 2 Nov 2018 21:34:12 +0000 [thread overview]
Message-ID: <4aff36999fa0061326cc64aea277203a7c877292.camel@intel.com> (raw)
In-Reply-To: <20181102180706.16582-4-imre.deak@intel.com>
On Fri, 2018-11-02 at 20:07 +0200, Imre Deak wrote:
> Verify on CNL, ICL that the combo PHY HW state stayed intact after
> PHY
> initialization.
>
> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
> Cc: José Roberto de Souza <jose.souza@intel.com>
> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
> Signed-off-by: Imre Deak <imre.deak@intel.com>
> ---
> drivers/gpu/drm/i915/intel_combo_phy.c | 103
> ++++++++++++++++++++++++++++++++-
> 1 file changed, 101 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_combo_phy.c
> b/drivers/gpu/drm/i915/intel_combo_phy.c
> index 13184ae5a217..1522e2a25390 100644
> --- a/drivers/gpu/drm/i915/intel_combo_phy.c
> +++ b/drivers/gpu/drm/i915/intel_combo_phy.c
> @@ -52,8 +52,8 @@ static const struct cnl_procmon {
> * registers, that's why we call the ICL macros even though the
> function has CNL
> * on its name.
> */
> -static void cnl_set_procmon_ref_values(struct drm_i915_private
> *dev_priv,
> - enum port port)
> +static const struct cnl_procmon *
> +cnl_get_procmon_ref_values(struct drm_i915_private *dev_priv, enum
> port port)
> {
> const struct cnl_procmon *procmon;
> u32 val;
> @@ -80,6 +80,17 @@ static void cnl_set_procmon_ref_values(struct
> drm_i915_private *dev_priv,
> break;
> }
>
> + return procmon;
> +}
> +
> +static void cnl_set_procmon_ref_values(struct drm_i915_private
> *dev_priv,
> + enum port port)
> +{
> + const struct cnl_procmon *procmon;
> + u32 val;
> +
> + procmon = cnl_get_procmon_ref_values(dev_priv, port);
> +
> val = I915_READ(ICL_PORT_COMP_DW1(port));
> val &= ~((0xff << 16) | 0xff);
> val |= procmon->dw1;
> @@ -89,6 +100,63 @@ static void cnl_set_procmon_ref_values(struct
> drm_i915_private *dev_priv,
> I915_WRITE(ICL_PORT_COMP_DW10(port), procmon->dw10);
> }
>
> +static bool check_phy_reg(struct drm_i915_private *dev_priv,
> + enum port port, i915_reg_t reg, u32 mask,
> + u32 expected_val)
> +{
> + u32 val = I915_READ(reg);
> +
> + if ((val & mask) != expected_val) {
> + DRM_DEBUG_DRIVER("Port-%c combo PHY reg %08x state
> mismatch: "
> + "current %08x mask %08x expected
> %08x\n",
> + port_name(port),
> + reg.reg, val, mask, expected_val);
> + return false;
> + }
> +
> + return true;
> +}
> +
> +static bool cnl_verify_procmon_ref_values(struct drm_i915_private
> *dev_priv,
> + enum port port)
> +{
> + const struct cnl_procmon *procmon;
> + bool ret;
> +
> + procmon = cnl_get_procmon_ref_values(dev_priv, port);
> +
> + ret = check_phy_reg(dev_priv, port, ICL_PORT_COMP_DW1(port),
> + (0xff << 16) | 0xff, procmon->dw1);
> + ret &= check_phy_reg(dev_priv, port, ICL_PORT_COMP_DW9(port),
> + -1U, procmon->dw9);
> + ret &= check_phy_reg(dev_priv, port, ICL_PORT_COMP_DW10(port),
> + -1U, procmon->dw10);
> +
> + return ret;
> +}
> +
> +static bool cnl_combo_phy_enabled(struct drm_i915_private *dev_priv)
> +{
> + return !(I915_READ(CHICKEN_MISC_2) & CNL_COMP_PWR_DOWN) &&
> + (I915_READ(CNL_PORT_COMP_DW0) & COMP_INIT);
> +}
> +
> +static bool cnl_combo_phy_verify_state(struct drm_i915_private
> *dev_priv)
> +{
> + enum port port = PORT_A;
> + bool ret;
> +
> + if (!cnl_combo_phy_enabled(dev_priv))
> + return false;
> +
> + ret = cnl_verify_procmon_ref_values(dev_priv, port);
> +
> + ret &= check_phy_reg(dev_priv, port, CNL_PORT_CL1CM_DW5,
> + CL_POWER_DOWN_ENABLE,
> CL_POWER_DOWN_ENABLE);
> +
> + return ret;
> +}
> +
> void cnl_combo_phys_init(struct drm_i915_private *dev_priv)
> {
> u32 val;
> @@ -113,11 +181,38 @@ void cnl_combo_phys_uninit(struct
> drm_i915_private *dev_priv)
> {
> u32 val;
>
> + if (!cnl_combo_phy_verify_state(dev_priv))
> + DRM_WARN("Combo PHY HW state changed unexpectedly.\n");
> +
> val = I915_READ(CHICKEN_MISC_2);
> val |= CNL_COMP_PWR_DOWN;
> I915_WRITE(CHICKEN_MISC_2, val);
> }
>
> +static bool icl_combo_phy_enabled(struct drm_i915_private *dev_priv,
> + enum port port)
> +{
> + return !(I915_READ(ICL_PHY_MISC(port)) &
> + ICL_PHY_MISC_DE_IO_COMP_PWR_DOWN) &&
> + (I915_READ(ICL_PORT_COMP_DW0(port)) & COMP_INIT);
> +}
> +
> +static bool icl_combo_phy_verify_state(struct drm_i915_private
> *dev_priv,
> + enum port port)
> +{
> + bool ret;
> +
> + if (!icl_combo_phy_enabled(dev_priv, port))
> + return false;
> +
> + ret = cnl_verify_procmon_ref_values(dev_priv, port);
> +
> + ret &= check_phy_reg(dev_priv, port, ICL_PORT_CL_DW5(port),
> + CL_POWER_DOWN_ENABLE,
> CL_POWER_DOWN_ENABLE);
> +
> + return ret;
> +}
> +
> void icl_combo_phys_init(struct drm_i915_private *dev_priv)
> {
> enum port port;
> @@ -148,6 +243,10 @@ void icl_combo_phys_uninit(struct
> drm_i915_private *dev_priv)
> for (port = PORT_A; port <= PORT_B; port++) {
> u32 val;
>
> + if (!icl_combo_phy_verify_state(dev_priv, port))
> + DRM_WARN("Port-%c combo PHY HW state changed
> unexpectedly\n",
> + port_name(port));
Minor: In most of the places the port indentification is printed like
this: "port %c"
> +
> val = I915_READ(ICL_PHY_MISC(port));
> val |= ICL_PHY_MISC_DE_IO_COMP_PWR_DOWN;
> I915_WRITE(ICL_PHY_MISC(port), val);
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2018-11-02 21:34 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-02 18:07 [PATCH 0/5] drm/i915/icl: Fix combo PHY HW context loss Imre Deak
2018-11-02 18:07 ` [PATCH 1/5] drm/i915/icl: Fix combo PHY uninit Imre Deak
2018-11-02 20:57 ` Souza, Jose
2018-11-02 22:04 ` Imre Deak
2018-11-02 18:07 ` [PATCH 2/5] drm/i915/cnl+: Move the combo PHY init/uninit code to a new file Imre Deak
2018-11-02 19:25 ` Rodrigo Vivi
2018-11-02 21:06 ` Souza, Jose
2018-11-02 22:11 ` Imre Deak
2018-11-02 18:07 ` [PATCH 3/5] drm/i915/cnl+: Verify combo PHY HW state during PHY uninit Imre Deak
2018-11-02 21:25 ` Souza, Jose
2018-11-02 22:00 ` Imre Deak
2018-11-02 21:34 ` Souza, Jose [this message]
2018-11-02 18:07 ` [PATCH 4/5] drm/i915/icl: Skip init for an already enabled combo PHY Imre Deak
2018-11-02 19:28 ` Rodrigo Vivi
2018-11-02 21:29 ` Souza, Jose
2018-11-02 18:07 ` [PATCH 5/5] drm/i915/icl: Fix port B combo PHY context loss after DC transitions Imre Deak
2018-11-02 19:22 ` Rodrigo Vivi
2018-11-05 11:02 ` Imre Deak
2018-11-02 21:44 ` Souza, Jose
2018-11-02 19:07 ` ✗ Fi.CI.CHECKPATCH: warning for drm/i915/icl: Fix combo PHY HW context loss Patchwork
2018-11-02 19:08 ` ✗ Fi.CI.SPARSE: " Patchwork
2018-11-02 19:25 ` ✓ Fi.CI.BAT: success " Patchwork
2018-11-02 23:02 ` ✓ Fi.CI.IGT: " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4aff36999fa0061326cc64aea277203a7c877292.camel@intel.com \
--to=jose.souza@intel.com \
--cc=imre.deak@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=paulo.r.zanoni@intel.com \
--cc=rodrigo.vivi@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox