From: Jani Nikula <jani.nikula@linux.intel.com>
To: Ville Syrjala <ville.syrjala@linux.intel.com>,
intel-gfx@lists.freedesktop.org
Subject: Re: [Intel-gfx] [PATCH 00/15] drm/i915/bios: PNPID->panel_type matching
Date: Wed, 25 May 2022 11:47:11 +0300 [thread overview]
Message-ID: <87mtf6uhgw.fsf@intel.com> (raw)
In-Reply-To: <20220510104242.6099-1-ville.syrjala@linux.intel.com>
On Tue, 10 May 2022, Ville Syrjala <ville.syrjala@linux.intel.com> wrote:
> From: Ville Syrjälä <ville.syrjala@linux.intel.com>
>
> Handle VBT panel_type=0xff, ie. extract the panel PNPID from
> the EDID and match it againts the VBT panel PNPIDs to determine
> the actual panel_type.
>
> We need to massage the PPS init code a bit to make sure it
> works sensible without having access to the VBT power
> sequencing delays until the end of the eDP probe.
>
> I also started on the path to split the per-panel data from
> i915->vbt into its own thing. So should get us one step closer
> to supporting multiple internal panels.
There was one drrs type check removal in patch 12 that needs explaining,
maybe there were some things I could've nitpicked about here and there,
but meh, series is,
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
>
> Ville Syrjälä (15):
> drm/i915: Pass intel_connector to intel_vrr_is_capable()
> drm/i915: Extract intel_edp_fixup_vbt_bpp()
> drm/i915/pps: Split pps_init_delays() into distinct parts
> drm/i915/pps: Introduce pps_delays_valid()
> drm/i915/pps: Don't apply quirks/etc. to the VBT PPS delays if they
> haven't been initialized
> drm/i915/pps: Stash away original BIOS programmed PPS delays
> drm/i915/pps: Split PPS init+sanitize in two
> drm/i915/pps: Reinit PPS delays after VBT has been fully parsed
> drm/i915/pps: Keep VDD enabled during eDP probe
> drm/i915/bios: Split parse_driver_features() into two parts
> drm/i915/bios: Split VBT parsing to global vs. panel specific parts
> drm/i915/bios: Split VBT data into per-panel vs. global parts
> drm/i915/bios: Determine panel type via PNPID match
> drm/edid: Extract drm_edid_decode_mfg_id()
> drm/i915/bios: Dump PNPID and panel name
>
> drivers/gpu/drm/i915/display/g4x_dp.c | 22 +-
> drivers/gpu/drm/i915/display/icl_dsi.c | 11 +-
> .../gpu/drm/i915/display/intel_backlight.c | 23 +-
> drivers/gpu/drm/i915/display/intel_bios.c | 496 +++++++++++-------
> drivers/gpu/drm/i915/display/intel_bios.h | 6 +
> drivers/gpu/drm/i915/display/intel_ddi.c | 22 +-
> .../drm/i915/display/intel_ddi_buf_trans.c | 9 +-
> .../drm/i915/display/intel_display_types.h | 71 +++
> drivers/gpu/drm/i915/display/intel_dp.c | 45 +-
> drivers/gpu/drm/i915/display/intel_dp.h | 2 +
> .../drm/i915/display/intel_dp_aux_backlight.c | 6 +-
> drivers/gpu/drm/i915/display/intel_drrs.c | 3 -
> drivers/gpu/drm/i915/display/intel_dsi.c | 2 +-
> .../i915/display/intel_dsi_dcs_backlight.c | 9 +-
> drivers/gpu/drm/i915/display/intel_dsi_vbt.c | 56 +-
> drivers/gpu/drm/i915/display/intel_lvds.c | 7 +-
> drivers/gpu/drm/i915/display/intel_panel.c | 13 +-
> drivers/gpu/drm/i915/display/intel_pps.c | 129 ++++-
> drivers/gpu/drm/i915/display/intel_pps.h | 1 +
> drivers/gpu/drm/i915/display/intel_psr.c | 30 +-
> drivers/gpu/drm/i915/display/intel_sdvo.c | 3 +
> drivers/gpu/drm/i915/display/intel_vrr.c | 14 +-
> drivers/gpu/drm/i915/display/intel_vrr.h | 4 +-
> drivers/gpu/drm/i915/display/vlv_dsi.c | 14 +-
> drivers/gpu/drm/i915/i915_drv.h | 63 ---
> include/drm/drm_edid.h | 21 +-
> 26 files changed, 672 insertions(+), 410 deletions(-)
--
Jani Nikula, Intel Open Source Graphics Center
prev parent reply other threads:[~2022-05-25 8:47 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-10 10:42 [Intel-gfx] [PATCH 00/15] drm/i915/bios: PNPID->panel_type matching Ville Syrjala
2022-05-10 10:42 ` [Intel-gfx] [PATCH 01/15] drm/i915: Pass intel_connector to intel_vrr_is_capable() Ville Syrjala
2022-05-10 10:42 ` [Intel-gfx] [PATCH 02/15] drm/i915: Extract intel_edp_fixup_vbt_bpp() Ville Syrjala
2022-05-10 10:42 ` [Intel-gfx] [PATCH 03/15] drm/i915/pps: Split pps_init_delays() into distinct parts Ville Syrjala
2022-05-10 10:42 ` [Intel-gfx] [PATCH 04/15] drm/i915/pps: Introduce pps_delays_valid() Ville Syrjala
2022-05-10 10:42 ` [Intel-gfx] [PATCH 05/15] drm/i915/pps: Don't apply quirks/etc. to the VBT PPS delays if they haven't been initialized Ville Syrjala
2022-05-10 10:42 ` [Intel-gfx] [PATCH 06/15] drm/i915/pps: Stash away original BIOS programmed PPS delays Ville Syrjala
2022-05-10 10:42 ` [Intel-gfx] [PATCH 07/15] drm/i915/pps: Split PPS init+sanitize in two Ville Syrjala
2022-05-10 10:42 ` [Intel-gfx] [PATCH 08/15] drm/i915/pps: Reinit PPS delays after VBT has been fully parsed Ville Syrjala
2022-05-10 10:42 ` [Intel-gfx] [PATCH 09/15] drm/i915/pps: Keep VDD enabled during eDP probe Ville Syrjala
2022-05-10 10:42 ` [Intel-gfx] [PATCH 10/15] drm/i915/bios: Split parse_driver_features() into two parts Ville Syrjala
2022-05-10 10:42 ` [Intel-gfx] [PATCH 11/15] drm/i915/bios: Split VBT parsing to global vs. panel specific parts Ville Syrjala
2022-05-10 10:42 ` [Intel-gfx] [PATCH 12/15] drm/i915/bios: Split VBT data into per-panel vs. global parts Ville Syrjala
2022-05-25 8:44 ` Jani Nikula
2022-05-25 10:40 ` Ville Syrjälä
2022-05-25 10:55 ` Jani Nikula
2022-05-10 10:42 ` [Intel-gfx] [PATCH 13/15] drm/i915/bios: Determine panel type via PNPID match Ville Syrjala
2022-05-10 10:42 ` [Intel-gfx] [PATCH 14/15] drm/edid: Extract drm_edid_decode_mfg_id() Ville Syrjala
2022-05-10 10:42 ` [Intel-gfx] [PATCH 15/15] drm/i915/bios: Dump PNPID and panel name Ville Syrjala
2022-05-11 16:03 ` [Intel-gfx] ✗ Fi.CI.SPARSE: warning for drm/i915/bios: PNPID->panel_type matching (rev2) Patchwork
2022-05-11 16:23 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork
2022-05-11 21:11 ` [Intel-gfx] ✗ Fi.CI.IGT: failure " Patchwork
2022-05-25 8:47 ` Jani Nikula [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87mtf6uhgw.fsf@intel.com \
--to=jani.nikula@linux.intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=ville.syrjala@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox