From: Jani Nikula <jani.nikula@linux.intel.com>
To: Ville Syrjala <ville.syrjala@linux.intel.com>,
intel-gfx@lists.freedesktop.org
Cc: Paz Zcharya <pazz@chromium.org>
Subject: Re: [PATCH 6/8] drm/i915: Allow fastboot to fix up the vblank delay
Date: Mon, 20 Jan 2025 18:53:24 +0200 [thread overview]
Message-ID: <87r04xpgu3.fsf@intel.com> (raw)
In-Reply-To: <20250116201637.22486-7-ville.syrjala@linux.intel.com>
On Thu, 16 Jan 2025, Ville Syrjala <ville.syrjala@linux.intel.com> wrote:
> From: Ville Syrjälä <ville.syrjala@linux.intel.com>
>
> GOP might not agree with our idea of what the vblank delay should be.
> Reuse the LRR codepaths to fix that up via a fastset.
>
> The relevant registers aren't actually double buffered so this is a
> little bit dodgy. While I've not seen any real issues from frobbing
> these live, let's limit this to just the fastboot case (by only
> allowing it when old_crtc_state->inherited==true).
>
> Cc: Paz Zcharya <pazz@chromium.org>
> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> ---
> drivers/gpu/drm/i915/display/intel_display.c | 26 +++++++++++++++++---
> 1 file changed, 22 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> index 9b42d980ed7e..471fe7d80f30 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.c
> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> @@ -5358,6 +5358,19 @@ pipe_config_cx0pll_mismatch(struct drm_printer *p, bool fastset,
> intel_cx0pll_dump_hw_state(display, b);
> }
>
> +static bool allow_vblank_delay_fastset(const struct intel_crtc_state *old_crtc_state)
> +{
> + struct intel_display *display = to_intel_display(old_crtc_state);
> +
> + /*
> + * Allow fastboot to fix up vblank delay (handled via LRR
> + * codepaths), a bit dodgy as the registers aren't
> + * double buffered but seems to be working more or less...
> + */
> + return HAS_LRR(display) && old_crtc_state->inherited &&
> + !intel_crtc_has_type(old_crtc_state, INTEL_OUTPUT_DSI);
> +}
> +
> bool
> intel_pipe_config_compare(const struct intel_crtc_state *current_config,
> const struct intel_crtc_state *pipe_config,
> @@ -5490,7 +5503,8 @@ intel_pipe_config_compare(const struct intel_crtc_state *current_config,
> PIPE_CONF_CHECK_I(name.crtc_hsync_start); \
> PIPE_CONF_CHECK_I(name.crtc_hsync_end); \
> PIPE_CONF_CHECK_I(name.crtc_vdisplay); \
> - PIPE_CONF_CHECK_I(name.crtc_vblank_start); \
> + if (!fastset || !allow_vblank_delay_fastset(current_config)) \
> + PIPE_CONF_CHECK_I(name.crtc_vblank_start); \
Side note, part of me wants to change fastset to some variation of "full
modeset" because *all* the compare checks are for !fastset.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
> PIPE_CONF_CHECK_I(name.crtc_vsync_start); \
> PIPE_CONF_CHECK_I(name.crtc_vsync_end); \
> if (!fastset || !pipe_config->update_lrr) { \
> @@ -6084,7 +6098,8 @@ static int intel_modeset_checks(struct intel_atomic_state *state)
> static bool lrr_params_changed(const struct drm_display_mode *old_adjusted_mode,
> const struct drm_display_mode *new_adjusted_mode)
> {
> - return old_adjusted_mode->crtc_vblank_end != new_adjusted_mode->crtc_vblank_end ||
> + return old_adjusted_mode->crtc_vblank_start != new_adjusted_mode->crtc_vblank_start ||
> + old_adjusted_mode->crtc_vblank_end != new_adjusted_mode->crtc_vblank_end ||
> old_adjusted_mode->crtc_vtotal != new_adjusted_mode->crtc_vtotal;
> }
>
> @@ -6098,11 +6113,14 @@ static void intel_crtc_check_fastset(const struct intel_crtc_state *old_crtc_sta
> if (old_crtc_state->vrr.in_range != new_crtc_state->vrr.in_range)
> new_crtc_state->update_lrr = false;
>
> - if (!intel_pipe_config_compare(old_crtc_state, new_crtc_state, true))
> + if (!intel_pipe_config_compare(old_crtc_state, new_crtc_state, true)) {
> drm_dbg_kms(&i915->drm, "[CRTC:%d:%s] fastset requirement not met, forcing full modeset\n",
> crtc->base.base.id, crtc->base.name);
> - else
> + } else {
> + if (allow_vblank_delay_fastset(old_crtc_state))
> + new_crtc_state->update_lrr = true;
> new_crtc_state->uapi.mode_changed = false;
> + }
>
> if (intel_compare_link_m_n(&old_crtc_state->dp_m_n,
> &new_crtc_state->dp_m_n))
--
Jani Nikula, Intel
next prev parent reply other threads:[~2025-01-20 16:53 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-01-16 20:16 [PATCH 0/8] drm/i915: Handle vblank delay vs. fastboot and finish DSB plane update enabling Ville Syrjala
2025-01-16 20:16 ` [PATCH 1/8] drm/i915: Keep TRANS_VBLANK.vblank_start==0 on ADL+ even when doing LRR updates Ville Syrjala
2025-01-20 16:48 ` Jani Nikula
2025-01-21 14:38 ` Ville Syrjälä
2025-01-16 20:16 ` [PATCH 2/8] drm/i915: Handle interlaced modes in intel_set_transcoder_timings_lrr() Ville Syrjala
2025-01-20 16:49 ` Jani Nikula
2025-01-16 20:16 ` [PATCH 3/8] drm/i915: Update TRANS_SET_CONTEXT_LATENCY during LRR updates Ville Syrjala
2025-01-20 16:49 ` Jani Nikula
2025-01-16 20:16 ` [PATCH 4/8] drm/i915: Warn if someone tries to use intel_set_transcoder_timings*() on DSI outputs Ville Syrjala
2025-01-20 16:50 ` Jani Nikula
2025-01-16 20:16 ` [PATCH 5/8] drm/i915: Extract lrr_params_changed() Ville Syrjala
2025-01-20 16:50 ` Jani Nikula
2025-01-16 20:16 ` [PATCH 6/8] drm/i915: Allow fastboot to fix up the vblank delay Ville Syrjala
2025-01-20 16:53 ` Jani Nikula [this message]
2025-01-20 19:21 ` Ville Syrjälä
2025-01-16 20:16 ` [PATCH 7/8] drm/i915/dsb: Add support for triggering VRR push with DSB Ville Syrjala
2025-01-16 20:16 ` [PATCH 8/8] drm/i915/dsb: Allow DSB to perform commits when VRR is enabled Ville Syrjala
2025-01-17 1:54 ` ✗ i915.CI.BAT: failure for drm/i915: Handle vblank delay vs. fastboot and finish DSB plane update enabling Patchwork
2025-01-17 12:01 ` ✓ i915.CI.BAT: success for drm/i915: Handle vblank delay vs. fastboot and finish DSB plane update enabling (rev2) Patchwork
2025-01-19 13:06 ` ✗ i915.CI.Full: failure " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87r04xpgu3.fsf@intel.com \
--to=jani.nikula@linux.intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=pazz@chromium.org \
--cc=ville.syrjala@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox