From: Gustavo Sousa <gustavo.sousa@intel.com>
To: James Xiong <james.xiong@intel.com>,
<intel-gfx@lists.freedesktop.org>,
<intel-xe@lists.freedesktop.org>
Cc: <jani.nikula@linux.intel.com>,
James Xiong <james.xiong@intel.com>,
"Imre Deak" <imre.deak@intel.com>
Subject: Re: [PATCH v3] drm/i915/dmc: fix assert_dmc_loaded WARN during async firmware load
Date: Mon, 11 May 2026 09:20:56 -0300 [thread overview]
Message-ID: <87tsseqgrb.fsf@intel.com> (raw)
In-Reply-To: <20260508181329.666762-1-james.xiong@intel.com>
James Xiong <james.xiong@intel.com> writes:
> During driver probe, DMC firmware is loaded asynchronously via a
> workqueue. There is a race between parse_dmc_fw() setting the payload
> pointer (making has_dmc_id_fw() return true) and intel_dmc_load_program()
> writing the firmware to hardware registers. If the probe thread calls
> intel_dmc_enable_pipe() -> assert_dmc_loaded() in this window via
> intel_modeset_setup_hw_state(), it sees parsed payload but stale HW
> registers, triggering a ~20% intermittent WARNING on ADL-N warm boot.
>
> v2: Fix by calling intel_dmc_wait_fw_load() in
> intel_modeset_setup_hw_state() before iterating the CRTCs (Gustavo
> Sousa).
>
> v3: Move intel_dmc_wait_fw_load() into intel_dmc_enable_pipe() itself
> so the function is self-contained (Jani Nikula, Gustavo Sousa).
>
> Signed-off-by: James Xiong <james.xiong@intel.com>
+Imre
Perhaps this deserves a fixes tag? If so, maybe it should be this one:
Fixes: 3af2ff0840be ("drm/i915: Enable a PIPEDMC whenever its corresponding pipe is enabled")
The change itself looks good to me, so
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
> ---
> drivers/gpu/drm/i915/display/intel_dmc.c | 7 ++++++-
> 1 file changed, 6 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_dmc.c b/drivers/gpu/drm/i915/display/intel_dmc.c
> index 0df4f42ba3e3..4151eae92744 100644
> --- a/drivers/gpu/drm/i915/display/intel_dmc.c
> +++ b/drivers/gpu/drm/i915/display/intel_dmc.c
> @@ -786,7 +786,12 @@ void intel_dmc_enable_pipe(const struct intel_crtc_state *crtc_state)
> enum pipe pipe = crtc->pipe;
> enum intel_dmc_id dmc_id = PIPE_TO_DMC_ID(pipe);
>
> - if (!is_valid_dmc_id(dmc_id) || !has_dmc_id_fw(display, dmc_id))
> + if (!is_valid_dmc_id(dmc_id))
> + return;
> +
> + intel_dmc_wait_fw_load(display);
> +
> + if (!has_dmc_id_fw(display, dmc_id))
> return;
>
> if (!can_enable_pipedmc(crtc_state)) {
> --
> 2.34.1
next prev parent reply other threads:[~2026-05-11 12:21 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-08 18:13 [PATCH v3] drm/i915/dmc: fix assert_dmc_loaded WARN during async firmware load James Xiong
2026-05-08 19:01 ` ✓ i915.CI.BAT: success for drm/i915/dmc: fix assert_dmc_loaded WARN during async firmware load (rev2) Patchwork
2026-05-09 17:17 ` ✗ i915.CI.Full: failure " Patchwork
2026-05-11 12:10 ` Gustavo Sousa
2026-05-11 12:20 ` Gustavo Sousa [this message]
2026-05-11 12:39 ` [PATCH v3] drm/i915/dmc: fix assert_dmc_loaded WARN during async firmware load Imre Deak
2026-05-11 12:50 ` Gustavo Sousa
2026-05-11 12:52 ` Gustavo Sousa
2026-05-11 12:59 ` Imre Deak
2026-05-12 8:25 ` Jani Nikula
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87tsseqgrb.fsf@intel.com \
--to=gustavo.sousa@intel.com \
--cc=imre.deak@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=intel-xe@lists.freedesktop.org \
--cc=james.xiong@intel.com \
--cc=jani.nikula@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox