public inbox for intel-gfx@lists.freedesktop.org
 help / color / mirror / Atom feed
From: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
To: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Subject: Re: [Intel-gfx] [PATCH 01/19] drm/i915/perf: Fix OA filtering logic for GuC mode
Date: Wed, 14 Sep 2022 15:26:15 -0700	[thread overview]
Message-ID: <YyJVB9DpKwhqqCHR@unerlige-ril> (raw)
In-Reply-To: <f1e9e230-2626-0f6c-02a7-e063122b759b@intel.com>

On Tue, Sep 06, 2022 at 09:39:33PM +0300, Lionel Landwerlin wrote:
>On 06/09/2022 20:39, Umesh Nerlige Ramappa wrote:
>>On Tue, Sep 06, 2022 at 05:33:00PM +0300, Lionel Landwerlin wrote:
>>>On 23/08/2022 23:41, Umesh Nerlige Ramappa wrote:
>>>>With GuC mode of submission, GuC is in control of defining the 
>>>>context id field
>>>>that is part of the OA reports. To filter reports, UMD and KMD 
>>>>must know what sw
>>>>context id was chosen by GuC. There is not interface between KMD 
>>>>and GuC to
>>>>determine this, so read the upper-dword of EXECLIST_STATUS to 
>>>>filter/squash OA
>>>>reports for the specific context.
>>>>
>>>>Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
>>>
>>>
>>>I assume you checked with GuC that this doesn't change as the 
>>>context is running?
>>
>>Correct.
>>
>>>
>>>With i915/execlist submission mode, we had to ask i915 to pin the 
>>>sw_id/ctx_id.
>>>
>>
>>From GuC perspective, the context id can change once KMD 
>>de-registers the context and that will not happen while the context 
>>is in use.
>>
>>Thanks,
>>Umesh
>
>
>Thanks Umesh,
>
>
>Maybe I should have been more precise in my question :
>
>
>Can the ID change while the i915-perf stream is opened?
>
>Because the ID not changing while the context is running makes sense.
>
>But since the number of available IDs is limited to 2k or something on 
>Gfx12, it's possible the GuC has to reuse IDs if too many apps want to 
>run during the period of time while i915-perf is active and filtering.
>

available guc ids are 64k with 4k reserved for multi-lrc, so GuC may 
have to reuse ids once 60k ids are used up.

Thanks,
Umesh

>
>-Lionel
>
>
>>
>>>
>>>If that's not the case then filtering is broken.
>>>
>>>
>>>-Lionel
>>>
>>>
>>>>---
>>>> drivers/gpu/drm/i915/gt/intel_lrc.h |   2 +
>>>> drivers/gpu/drm/i915/i915_perf.c    | 141 ++++++++++++++++++++++++----
>>>> 2 files changed, 124 insertions(+), 19 deletions(-)
>>>>
>>>>diff --git a/drivers/gpu/drm/i915/gt/intel_lrc.h 
>>>>b/drivers/gpu/drm/i915/gt/intel_lrc.h
>>>>index a390f0813c8b..7111bae759f3 100644
>>>>--- a/drivers/gpu/drm/i915/gt/intel_lrc.h
>>>>+++ b/drivers/gpu/drm/i915/gt/intel_lrc.h
>>>>@@ -110,6 +110,8 @@ enum {
>>>> #define XEHP_SW_CTX_ID_WIDTH            16
>>>> #define XEHP_SW_COUNTER_SHIFT            58
>>>> #define XEHP_SW_COUNTER_WIDTH            6
>>>>+#define GEN12_GUC_SW_CTX_ID_SHIFT        39
>>>>+#define GEN12_GUC_SW_CTX_ID_WIDTH        16
>>>> static inline void lrc_runtime_start(struct intel_context *ce)
>>>> {
>>>>diff --git a/drivers/gpu/drm/i915/i915_perf.c 
>>>>b/drivers/gpu/drm/i915/i915_perf.c
>>>>index f3c23fe9ad9c..735244a3aedd 100644
>>>>--- a/drivers/gpu/drm/i915/i915_perf.c
>>>>+++ b/drivers/gpu/drm/i915/i915_perf.c
>>>>@@ -1233,6 +1233,125 @@ static struct intel_context 
>>>>*oa_pin_context(struct i915_perf_stream *stream)
>>>>     return stream->pinned_ctx;
>>>> }
>>>>+static int
>>>>+__store_reg_to_mem(struct i915_request *rq, i915_reg_t reg, u32 
>>>>ggtt_offset)
>>>>+{
>>>>+    u32 *cs, cmd;
>>>>+
>>>>+    cmd = MI_STORE_REGISTER_MEM | MI_SRM_LRM_GLOBAL_GTT;
>>>>+    if (GRAPHICS_VER(rq->engine->i915) >= 8)
>>>>+        cmd++;
>>>>+
>>>>+    cs = intel_ring_begin(rq, 4);
>>>>+    if (IS_ERR(cs))
>>>>+        return PTR_ERR(cs);
>>>>+
>>>>+    *cs++ = cmd;
>>>>+    *cs++ = i915_mmio_reg_offset(reg);
>>>>+    *cs++ = ggtt_offset;
>>>>+    *cs++ = 0;
>>>>+
>>>>+    intel_ring_advance(rq, cs);
>>>>+
>>>>+    return 0;
>>>>+}
>>>>+
>>>>+static int
>>>>+__read_reg(struct intel_context *ce, i915_reg_t reg, u32 ggtt_offset)
>>>>+{
>>>>+    struct i915_request *rq;
>>>>+    int err;
>>>>+
>>>>+    rq = i915_request_create(ce);
>>>>+    if (IS_ERR(rq))
>>>>+        return PTR_ERR(rq);
>>>>+
>>>>+    i915_request_get(rq);
>>>>+
>>>>+    err = __store_reg_to_mem(rq, reg, ggtt_offset);
>>>>+
>>>>+    i915_request_add(rq);
>>>>+    if (!err && i915_request_wait(rq, 0, HZ / 2) < 0)
>>>>+        err = -ETIME;
>>>>+
>>>>+    i915_request_put(rq);
>>>>+
>>>>+    return err;
>>>>+}
>>>>+
>>>>+static int
>>>>+gen12_guc_sw_ctx_id(struct intel_context *ce, u32 *ctx_id)
>>>>+{
>>>>+    struct i915_vma *scratch;
>>>>+    u32 *val;
>>>>+    int err;
>>>>+
>>>>+    scratch = 
>>>>__vm_create_scratch_for_read_pinned(&ce->engine->gt->ggtt->vm, 
>>>>4);
>>>>+    if (IS_ERR(scratch))
>>>>+        return PTR_ERR(scratch);
>>>>+
>>>>+    err = i915_vma_sync(scratch);
>>>>+    if (err)
>>>>+        goto err_scratch;
>>>>+
>>>>+    err = __read_reg(ce, 
>>>>RING_EXECLIST_STATUS_HI(ce->engine->mmio_base),
>>>>+             i915_ggtt_offset(scratch));
>>>>+    if (err)
>>>>+        goto err_scratch;
>>>>+
>>>>+    val = i915_gem_object_pin_map_unlocked(scratch->obj, I915_MAP_WB);
>>>>+    if (IS_ERR(val)) {
>>>>+        err = PTR_ERR(val);
>>>>+        goto err_scratch;
>>>>+    }
>>>>+
>>>>+    *ctx_id = *val;
>>>>+    i915_gem_object_unpin_map(scratch->obj);
>>>>+
>>>>+err_scratch:
>>>>+    i915_vma_unpin_and_release(&scratch, 0);
>>>>+    return err;
>>>>+}
>>>>+
>>>>+/*
>>>>+ * For execlist mode of submission, pick an unused context id
>>>>+ * 0 - (NUM_CONTEXT_TAG -1) are used by other contexts
>>>>+ * XXX_MAX_CONTEXT_HW_ID is used by idle context
>>>>+ *
>>>>+ * For GuC mode of submission read context id from the upper 
>>>>dword of the
>>>>+ * EXECLIST_STATUS register.
>>>>+ */
>>>>+static int gen12_get_render_context_id(struct i915_perf_stream 
>>>>*stream)
>>>>+{
>>>>+    u32 ctx_id, mask;
>>>>+    int ret;
>>>>+
>>>>+    if (intel_engine_uses_guc(stream->engine)) {
>>>>+        ret = gen12_guc_sw_ctx_id(stream->pinned_ctx, &ctx_id);
>>>>+        if (ret)
>>>>+            return ret;
>>>>+
>>>>+        mask = ((1U << GEN12_GUC_SW_CTX_ID_WIDTH) - 1) <<
>>>>+            (GEN12_GUC_SW_CTX_ID_SHIFT - 32);
>>>>+    } else if (GRAPHICS_VER_FULL(stream->engine->i915) >= 
>>>>IP_VER(12, 50)) {
>>>>+        ctx_id = (XEHP_MAX_CONTEXT_HW_ID - 1) <<
>>>>+            (XEHP_SW_CTX_ID_SHIFT - 32);
>>>>+
>>>>+        mask = ((1U << XEHP_SW_CTX_ID_WIDTH) - 1) <<
>>>>+            (XEHP_SW_CTX_ID_SHIFT - 32);
>>>>+    } else {
>>>>+        ctx_id = (GEN12_MAX_CONTEXT_HW_ID - 1) <<
>>>>+             (GEN11_SW_CTX_ID_SHIFT - 32);
>>>>+
>>>>+        mask = ((1U << GEN11_SW_CTX_ID_WIDTH) - 1) <<
>>>>+            (GEN11_SW_CTX_ID_SHIFT - 32);
>>>>+    }
>>>>+    stream->specific_ctx_id = ctx_id & mask;
>>>>+    stream->specific_ctx_id_mask = mask;
>>>>+
>>>>+    return 0;
>>>>+}
>>>>+
>>>> /**
>>>>  * oa_get_render_ctx_id - determine and hold ctx hw id
>>>>  * @stream: An i915-perf stream opened for OA metrics
>>>>@@ -1246,6 +1365,7 @@ static struct intel_context 
>>>>*oa_pin_context(struct i915_perf_stream *stream)
>>>> static int oa_get_render_ctx_id(struct i915_perf_stream *stream)
>>>> {
>>>>     struct intel_context *ce;
>>>>+    int ret = 0;
>>>>     ce = oa_pin_context(stream);
>>>>     if (IS_ERR(ce))
>>>>@@ -1292,24 +1412,7 @@ static int oa_get_render_ctx_id(struct 
>>>>i915_perf_stream *stream)
>>>>     case 11:
>>>>     case 12:
>>>>-        if (GRAPHICS_VER_FULL(ce->engine->i915) >= IP_VER(12, 50)) {
>>>>-            stream->specific_ctx_id_mask =
>>>>-                ((1U << XEHP_SW_CTX_ID_WIDTH) - 1) <<
>>>>-                (XEHP_SW_CTX_ID_SHIFT - 32);
>>>>-            stream->specific_ctx_id =
>>>>-                (XEHP_MAX_CONTEXT_HW_ID - 1) <<
>>>>-                (XEHP_SW_CTX_ID_SHIFT - 32);
>>>>-        } else {
>>>>-            stream->specific_ctx_id_mask =
>>>>-                ((1U << GEN11_SW_CTX_ID_WIDTH) - 1) << 
>>>>(GEN11_SW_CTX_ID_SHIFT - 32);
>>>>-            /*
>>>>-             * Pick an unused context id
>>>>-             * 0 - BITS_PER_LONG are used by other contexts
>>>>-             * GEN12_MAX_CONTEXT_HW_ID (0x7ff) is used by idle context
>>>>-             */
>>>>-            stream->specific_ctx_id =
>>>>-                (GEN12_MAX_CONTEXT_HW_ID - 1) << 
>>>>(GEN11_SW_CTX_ID_SHIFT - 32);
>>>>-        }
>>>>+        ret = gen12_get_render_context_id(stream);
>>>>         break;
>>>>     default:
>>>>@@ -1323,7 +1426,7 @@ static int oa_get_render_ctx_id(struct 
>>>>i915_perf_stream *stream)
>>>>         stream->specific_ctx_id,
>>>>         stream->specific_ctx_id_mask);
>>>>-    return 0;
>>>>+    return ret;
>>>> }
>>>> /**
>>>
>>>
>

  reply	other threads:[~2022-09-14 22:26 UTC|newest]

Thread overview: 84+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-08-23 20:41 [Intel-gfx] [PATCH 00/19] Add DG2 OA support Umesh Nerlige Ramappa
2022-08-23 20:41 ` [Intel-gfx] [PATCH 01/19] drm/i915/perf: Fix OA filtering logic for GuC mode Umesh Nerlige Ramappa
2022-09-06 14:33   ` Lionel Landwerlin
2022-09-06 17:39     ` Umesh Nerlige Ramappa
2022-09-06 18:39       ` Lionel Landwerlin
2022-09-14 22:26         ` Umesh Nerlige Ramappa [this message]
2022-09-14 23:13           ` Umesh Nerlige Ramappa
2022-09-15 22:49             ` Umesh Nerlige Ramappa
2022-09-20  3:22               ` Dixit, Ashutosh
2022-09-22  3:51                 ` Dixit, Ashutosh
2022-09-22 11:05             ` Lionel Landwerlin
2022-09-09 23:47   ` Dixit, Ashutosh
2022-09-13  3:08     ` Dixit, Ashutosh
2022-09-14 23:37       ` Umesh Nerlige Ramappa
2022-09-14 23:36     ` Umesh Nerlige Ramappa
2022-09-22  3:44     ` Dixit, Ashutosh
2022-09-22  3:49       ` Dixit, Ashutosh
2022-08-23 20:41 ` [Intel-gfx] [PATCH 02/19] drm/i915/perf: Add OA formats for DG2 Umesh Nerlige Ramappa
2022-09-06 19:35   ` Lionel Landwerlin
2022-09-06 19:46     ` Umesh Nerlige Ramappa
2022-09-06 19:59       ` Lionel Landwerlin
2022-09-13 15:40   ` Dixit, Ashutosh
2022-09-14 20:54     ` Umesh Nerlige Ramappa
2022-09-14 21:16       ` Dixit, Ashutosh
2022-08-23 20:41 ` [Intel-gfx] [PATCH 03/19] drm/i915/perf: Fix noa wait predication " Umesh Nerlige Ramappa
2022-09-20  0:35   ` Dixit, Ashutosh
2022-08-23 20:41 ` [Intel-gfx] [PATCH 04/19] drm/i915/perf: Determine gen12 oa ctx offset at runtime Umesh Nerlige Ramappa
2022-09-06 19:48   ` Lionel Landwerlin
2022-09-06 20:35     ` Umesh Nerlige Ramappa
2022-09-08 18:32       ` Lionel Landwerlin
2022-09-08 23:04         ` Umesh Nerlige Ramappa
2022-08-23 20:41 ` [Intel-gfx] [PATCH 05/19] drm/i915/perf: Enable commands per clock reporting in OA Umesh Nerlige Ramappa
2022-09-06 19:51   ` Lionel Landwerlin
2022-09-14  0:19   ` Dixit, Ashutosh
2022-09-15  0:04     ` Umesh Nerlige Ramappa
2022-08-23 20:41 ` [Intel-gfx] [PATCH 06/19] drm/i915/perf: Use helpers to process reports w.r.t. OA buffer size Umesh Nerlige Ramappa
2022-09-14 16:04   ` Dixit, Ashutosh
2022-09-14 18:19     ` Umesh Nerlige Ramappa
2022-09-14 19:07       ` Dixit, Ashutosh
2022-08-23 20:41 ` [Intel-gfx] [PATCH 07/19] drm/i915/perf: Simply use stream->ctx Umesh Nerlige Ramappa
2022-09-06 19:52   ` Lionel Landwerlin
2022-08-23 20:41 ` [Intel-gfx] [PATCH 08/19] drm/i915/perf: Move gt-specific data from i915->perf to gt->perf Umesh Nerlige Ramappa
2022-09-06 19:54   ` Lionel Landwerlin
2022-09-14 18:20   ` Dixit, Ashutosh
2022-08-23 20:41 ` [Intel-gfx] [PATCH 09/19] drm/i915/perf: Replace gt->perf.lock with stream->lock for file ops Umesh Nerlige Ramappa
2022-09-14 19:04   ` Dixit, Ashutosh
2022-08-23 20:41 ` [Intel-gfx] [PATCH 10/19] drm/i915/perf: Use gt-specific ggtt for OA and noa-wait buffers Umesh Nerlige Ramappa
2022-09-06 19:56   ` Lionel Landwerlin
2022-09-06 20:28     ` Umesh Nerlige Ramappa
2022-09-06 20:31       ` Lionel Landwerlin
2022-08-23 20:41 ` [Intel-gfx] [PATCH 11/19] drm/i915/perf: Store a pointer to oa_format in oa_buffer Umesh Nerlige Ramappa
2022-09-06 19:56   ` Lionel Landwerlin
2022-09-14 20:43   ` Dixit, Ashutosh
2022-08-23 20:41 ` [Intel-gfx] [PATCH 12/19] drm/i915/perf: Parse 64bit report header formats correctly Umesh Nerlige Ramappa
2022-09-16  0:47   ` Dixit, Ashutosh
2022-08-23 20:41 ` [Intel-gfx] [PATCH 13/19] drm/i915/perf: Add Wa_16010703925:dg2 Umesh Nerlige Ramappa
2022-09-16  1:08   ` Dixit, Ashutosh
2022-08-23 20:41 ` [Intel-gfx] [PATCH 14/19] drm/i915/perf: Add Wa_1608133521:dg2 Umesh Nerlige Ramappa
2022-08-29 14:04   ` Jani Nikula
2022-09-16  1:21   ` Dixit, Ashutosh
2022-09-16 18:19     ` Umesh Nerlige Ramappa
2022-08-23 20:41 ` [Intel-gfx] [PATCH 15/19] drm/i915/perf: Add Wa_1508761755:dg2 Umesh Nerlige Ramappa
2022-09-16  1:34   ` Dixit, Ashutosh
2022-08-23 20:41 ` [Intel-gfx] [PATCH 16/19] drm/i915/perf: Apply Wa_18013179988 Umesh Nerlige Ramappa
2022-09-16  5:16   ` Dixit, Ashutosh
2022-09-16 15:22     ` Dixit, Ashutosh
2022-09-16 19:04       ` Umesh Nerlige Ramappa
2022-09-16 18:56     ` Umesh Nerlige Ramappa
2022-09-16 19:57       ` Dixit, Ashutosh
2022-09-16 20:25         ` Umesh Nerlige Ramappa
2022-09-16 21:00           ` Dixit, Ashutosh
2022-09-19 21:21             ` Umesh Nerlige Ramappa
2022-09-20  1:24               ` Dixit, Ashutosh
2022-08-23 20:41 ` [Intel-gfx] [PATCH 17/19] drm/i915/perf: Save/restore EU flex counters across reset Umesh Nerlige Ramappa
2022-09-16  5:40   ` Dixit, Ashutosh
2022-08-23 20:41 ` [Intel-gfx] [PATCH 18/19] drm/i915/guc: Support OA when Wa_16011777198 is enabled Umesh Nerlige Ramappa
2022-09-16 21:41   ` Dixit, Ashutosh
2022-09-16 21:48     ` Umesh Nerlige Ramappa
2022-08-23 20:41 ` [Intel-gfx] [PATCH 19/19] drm/i915/perf: Enable OA for DG2 Umesh Nerlige Ramappa
2022-08-23 21:11 ` [Intel-gfx] [PATCH 02/19] drm/i915/perf: Add OA formats " Umesh Nerlige Ramappa
2022-08-23 21:12 ` [Intel-gfx] [PATCH 19/19] drm/i915/perf: Enable OA " Umesh Nerlige Ramappa
2022-08-23 22:07 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for Add DG2 OA support (rev2) Patchwork
2022-08-23 22:07 ` [Intel-gfx] ✗ Fi.CI.SPARSE: " Patchwork
  -- strict thread matches above, loose matches on Subject: below --
2022-08-23  0:03 [Intel-gfx] [PATCH 00/19] Add DG2 OA support Umesh Nerlige Ramappa
2022-08-23  0:03 ` [Intel-gfx] [PATCH 01/19] drm/i915/perf: Fix OA filtering logic for GuC mode Umesh Nerlige Ramappa

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=YyJVB9DpKwhqqCHR@unerlige-ril \
    --to=umesh.nerlige.ramappa@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=lionel.g.landwerlin@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox