Re: [PATCH v3 7/8] drm/i915/dp: Write the source OUI during connector detection

["Ville Syrjälä" <ville.syrjala@linux.intel.com>]

On Wed, Oct 16, 2024 at 04:24:04PM +0300, Imre Deak wrote:
> The DP sink's capabilities, like DSC, may depend on the source OUI
> written to the sink. On eDP this OUI value could have been reset before
> the detection started if the panel power on it got disabled. Make sure
> the OUI is re-written at the beginning of detection in this case, before
> the sink capabilities are read out.
> 
> Signed-off-by: Imre Deak <imre.deak@intel.com>

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

> ---
>  drivers/gpu/drm/i915/display/intel_dp.c | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
> index 520cc6f50a126..063fe92d43786 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> @@ -5669,6 +5669,8 @@ intel_dp_detect(struct drm_connector *connector,
>  		goto out_unset_edid;
>  	}
>  
> +	intel_dp_init_source_oui(intel_dp);
> +
>  	ret = intel_dp_tunnel_detect(intel_dp, ctx);
>  	if (ret == -EDEADLK) {
>  		status = ret;
> -- 
> 2.44.2

-- 
Ville Syrjälä
Intel