Intel-GFX Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Imre Deak <imre.deak@intel.com>
To: Jani Nikula <jani.nikula@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH v3 2/8] drm/i915/dp: Ensure panel power remains enabled during connector detection
Date: Wed, 23 Oct 2024 18:48:51 +0300	[thread overview]
Message-ID: <Zxka4-Z9Sdk6cvFl@ideak-desk.fi.intel.com> (raw)
In-Reply-To: <87o73au9sg.fsf@intel.com>

On Wed, Oct 23, 2024 at 06:19:11PM +0300, Jani Nikula wrote:
> On Wed, 16 Oct 2024, Imre Deak <imre.deak@intel.com> wrote:
> > The sink's capabilities, like the DSC caps, depend on the source OUI
> > written to the sink's DPCD registers and so this OUI value should be
> > valid for the whole duration of the detection. An eDP sink will reset
> > this OUI value when the panel power is disabled, so prevent the
> > disabling - happening by default after a 1 sec idle period - for the
> > whole duration of detection.
> >
> > Signed-off-by: Imre Deak <imre.deak@intel.com>
> > ---
> >  drivers/gpu/drm/i915/display/intel_dp.c  | 18 +++++++++++++-----
> >  drivers/gpu/drm/i915/display/intel_pps.c | 11 +++++++++++
> >  drivers/gpu/drm/i915/display/intel_pps.h |  1 +
> >  3 files changed, 25 insertions(+), 5 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
> > index 977ff2ce18eeb..3da06d25bc4ef 100644
> > --- a/drivers/gpu/drm/i915/display/intel_dp.c
> > +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> > @@ -5616,6 +5616,8 @@ intel_dp_detect(struct drm_connector *connector,
> >  
> >  	intel_dp_flush_connector_commits(intel_connector);
> >  
> > +	intel_pps_vdd_on(intel_dp);
> > +
> 
> The comment above this one says, "Must be paired with intel_pps_off()."
> 
> Needs an update.

Ok, missed that. Can change it to "Must be paired with
intel_pps_vdd_off() or - to disable both VDD and panel power -
intel_pps_off()". (The locking requirement stays the same.)

> 
> BR,
> Jani.
> 
> 
> >  	/* Can't disconnect eDP */
> >  	if (intel_dp_is_edp(intel_dp))
> >  		status = edp_detect(intel_dp);
> > @@ -5646,12 +5648,15 @@ intel_dp_detect(struct drm_connector *connector,
> >  
> >  		intel_dp_tunnel_disconnect(intel_dp);
> >  
> > -		goto out;
> > +		goto out_unset_edid;
> >  	}
> >  
> >  	ret = intel_dp_tunnel_detect(intel_dp, ctx);
> > -	if (ret == -EDEADLK)
> > -		return ret;
> > +	if (ret == -EDEADLK) {
> > +		status = ret;
> > +
> > +		goto out_vdd_off;
> > +	}
> >  
> >  	if (ret == 1)
> >  		intel_connector->base.epoch_counter++;
> > @@ -5679,7 +5684,7 @@ intel_dp_detect(struct drm_connector *connector,
> >  		 * with EDID on it
> >  		 */
> >  		status = connector_status_disconnected;
> > -		goto out;
> > +		goto out_unset_edid;
> >  	}
> >  
> >  	/*
> > @@ -5708,7 +5713,7 @@ intel_dp_detect(struct drm_connector *connector,
> >  
> >  	intel_dp_check_device_service_irq(intel_dp);
> >  
> > -out:
> > +out_unset_edid:
> >  	if (status != connector_status_connected && !intel_dp->is_mst)
> >  		intel_dp_unset_edid(intel_dp);
> >  
> > @@ -5717,6 +5722,9 @@ intel_dp_detect(struct drm_connector *connector,
> >  						 status,
> >  						 intel_dp->dpcd,
> >  						 intel_dp->downstream_ports);
> > +out_vdd_off:
> > +	intel_pps_vdd_off(intel_dp);
> > +
> >  	return status;
> >  }
> >  
> > diff --git a/drivers/gpu/drm/i915/display/intel_pps.c b/drivers/gpu/drm/i915/display/intel_pps.c
> > index ffeee9daa5689..64f1f7ea94993 100644
> > --- a/drivers/gpu/drm/i915/display/intel_pps.c
> > +++ b/drivers/gpu/drm/i915/display/intel_pps.c
> > @@ -950,6 +950,17 @@ void intel_pps_vdd_off_unlocked(struct intel_dp *intel_dp, bool sync)
> >  		edp_panel_vdd_schedule_off(intel_dp);
> >  }
> >  
> > +void intel_pps_vdd_off(struct intel_dp *intel_dp)
> > +{
> > +	intel_wakeref_t wakeref;
> > +
> > +	if (!intel_dp_is_edp(intel_dp))
> > +		return;
> > +
> > +	with_intel_pps_lock(intel_dp, wakeref)
> > +		intel_pps_vdd_off_unlocked(intel_dp, false);
> > +}
> > +
> >  void intel_pps_on_unlocked(struct intel_dp *intel_dp)
> >  {
> >  	struct intel_display *display = to_intel_display(intel_dp);
> > diff --git a/drivers/gpu/drm/i915/display/intel_pps.h b/drivers/gpu/drm/i915/display/intel_pps.h
> > index bc5046d536264..c83007152f07d 100644
> > --- a/drivers/gpu/drm/i915/display/intel_pps.h
> > +++ b/drivers/gpu/drm/i915/display/intel_pps.h
> > @@ -34,6 +34,7 @@ void intel_pps_off_unlocked(struct intel_dp *intel_dp);
> >  void intel_pps_check_power_unlocked(struct intel_dp *intel_dp);
> >  
> >  void intel_pps_vdd_on(struct intel_dp *intel_dp);
> > +void intel_pps_vdd_off(struct intel_dp *intel_dp);
> >  void intel_pps_on(struct intel_dp *intel_dp);
> >  void intel_pps_off(struct intel_dp *intel_dp);
> >  void intel_pps_vdd_off_sync(struct intel_dp *intel_dp);
> 
> -- 
> Jani Nikula, Intel

  reply	other threads:[~2024-10-23 15:48 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-10-16 13:23 [PATCH v3 0/8] drm/i915: Write source OUI for non-eDP sinks Imre Deak
2024-10-16 13:23 ` [PATCH v3 1/8] drm/i915/dp: Flush modeset commits during connector detection Imre Deak
2024-10-23 12:15   ` Ville Syrjälä
2024-10-23 14:19     ` Imre Deak
2024-10-16 13:23 ` [PATCH v3 2/8] drm/i915/dp: Ensure panel power remains enabled " Imre Deak
2024-10-23 12:43   ` Ville Syrjälä
2024-10-23 15:19   ` Jani Nikula
2024-10-23 15:48     ` Imre Deak [this message]
2024-10-16 13:24 ` [PATCH v3 3/8] drm/i915/dp: Initialize the source OUI write timestamp always Imre Deak
2024-10-23 12:15   ` Ville Syrjälä
2024-10-16 13:24 ` [PATCH v3 4/8] drm/i915/dp: Track source OUI validity explicitly Imre Deak
2024-10-22  9:46   ` [PATCH v4 " Imre Deak
2024-10-23 12:16     ` Ville Syrjälä
2024-10-23 14:40       ` Imre Deak
2024-10-25  7:18         ` Ville Syrjälä
2024-10-16 13:24 ` [PATCH v3 5/8] drm/i915/dp: Reuse intel_dp_detect_dsc_caps() for eDP Imre Deak
2024-10-23 12:15   ` Ville Syrjälä
2024-10-16 13:24 ` [PATCH v3 6/8] drm/i915/dp: Write the source OUI for eDP before detecting sink capabilities Imre Deak
2024-10-23 12:15   ` Ville Syrjälä
2024-10-16 13:24 ` [PATCH v3 7/8] drm/i915/dp: Write the source OUI during connector detection Imre Deak
2024-10-23 12:46   ` Ville Syrjälä
2024-10-16 13:24 ` [PATCH v3 8/8] drm/i915/dp: Write the source OUI for non-eDP sinks as well Imre Deak
2024-10-22  9:46   ` [PATCH v4 " Imre Deak
2024-10-16 19:12 ` ✗ Fi.CI.SPARSE: warning for drm/i915: Write source OUI for non-eDP sinks Patchwork
2024-10-16 19:12 ` ✓ Fi.CI.BAT: success " Patchwork
2024-10-16 20:48 ` ✗ Fi.CI.IGT: failure " Patchwork
2024-10-22 12:21 ` ✗ Fi.CI.SPARSE: warning for drm/i915: Write source OUI for non-eDP sinks (rev3) Patchwork
2024-10-22 12:27 ` ✗ Fi.CI.BAT: failure " Patchwork
2024-10-22 13:04   ` Imre Deak
2024-10-22 13:25     ` Imre Deak

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=Zxka4-Z9Sdk6cvFl@ideak-desk.fi.intel.com \
    --to=imre.deak@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=jani.nikula@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox