From: "Kamble, Sagar A" <sagar.a.kamble@intel.com>
To: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH v2 1/1] drm/i915: Do RPM Wake during GuC/HuC status read
Date: Mon, 6 Feb 2017 10:34:31 +0530 [thread overview]
Message-ID: <c6dab917-a328-e8d0-70cc-2e5cdafc3beb@intel.com> (raw)
In-Reply-To: <20170204141058.GA31816@ahiler-desk.igk.intel.com>
On 2/4/2017 7:40 PM, Arkadiusz Hiler wrote:
> On Fri, Feb 03, 2017 at 01:58:33PM +0530, Sagar Arun Kamble wrote:
>> HUC_STATUS, GUC_STATUS, SOFT_SCRATCH registers are read in debugfs
>> and getparam ioctl. This patch covers those accesses by RPM get/put.
>>
>> v2: Covering access in i915_getparam(I915_PARAM_HUC_STATUS) (ChrisW)
>>
>> Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
>> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
>> Cc: Fiedorowicz, Lukasz <lukasz.fiedorowicz@intel.com>
>> Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
>> ---
>> drivers/gpu/drm/i915/i915_debugfs.c | 6 ++++++
>> drivers/gpu/drm/i915/i915_drv.c | 5 ++---
>> 2 files changed, 8 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
>> index 3ae0656..639ed12 100644
>> --- a/drivers/gpu/drm/i915/i915_debugfs.c
>> +++ b/drivers/gpu/drm/i915/i915_debugfs.c
>> @@ -2374,7 +2374,9 @@ static int i915_huc_load_status_info(struct seq_file *m, void *data)
>> seq_printf(m, "\tRSA: offset is %d; size = %d\n",
>> huc_fw->rsa_offset, huc_fw->rsa_size);
>>
>> + intel_runtime_pm_get(dev_priv);
>> seq_printf(m, "\nHuC status 0x%08x:\n", I915_READ(HUC_STATUS2));
>> + intel_runtime_pm_put(dev_priv);
>>
>> return 0;
>> }
> Are you sure that HUC_STATUS2 requires RPM get for reading?
>
> I remember trying reading it with device forcefully asleep and it
> succeed just fine.
Hi Arek,
Faced following warning with device runtime_status=suspended.
Also this register lies in media forcewake range and should have similar
RPM get/put needs as other registers unless this has special behavior I
am not aware of.
[ 153.923576] WARNING: CPU: 1 PID: 1859 at
drivers/gpu/drm/i915/intel_drv.h:1698 gen9_decoupled_read32+0x1a1/0x1c0
[i915]
[ 153.923578] Device suspended during HW access
[ 153.923580] Modules linked in: spi_pxa2xx_platform 8250_dw
i2c_designware_platform i2c_designware_core intel_rapl
intel_telemetry_debugfs intel_telemetry_pltdrv intel_punit_ipc
intel_telemetry_core x86_pkg_temp_thermal binfmt_misc coretemp kvm_intel
snd_soc_skl kvm snd_soc_rt298 snd_soc_skl_ipc snd_soc_rt286
snd_soc_sst_ipc snd_soc_rl6347a snd_soc_sst_dsp snd_hda_ext_core
snd_soc_sst_match irqbypass nls_iso8859_1 crct10dif_pclmul crc32_pclmul
ghash_clmulni_intel pcbc snd_hda_codec_hdmi snd_hda_intel snd_hda_codec
snd_hda_core snd_soc_core snd_hwdep aesni_intel snd_compress aes_x86_64
ac97_bus crypto_simd snd_pcm_dmaengine glue_helper cryptd snd_pcm
intel_rapl_perf snd_seq_midi snd_seq_midi_event wdat_wdt snd_rawmidi
input_leds serio_raw snd_seq pwm_lpss_pci pwm_lpss snd_seq_device
snd_timer idma64
[ 153.923671] virt_dma intel_lpss_pci intel_lpss snd
hid_sensor_accel_3d hid_sensor_magn_3d hid_sensor_als hid_sensor_gyro_3d
hid_sensor_incl_3d hid_sensor_rotation hid_sensor_press
hid_sensor_trigger mei_me industrialio_triggered_buffer kfifo_buf
hid_sensor_iio_common industrialio mei soundcore shpchp rfkill_gpio
soc_button_array intel_vbtn tpm_crb ucsi intel_hid intel_pmc_ipc
sparse_keymap mac_hid autofs4 hid_generic usbhid hid_sensor_custom
hid_sensor_hub intel_ishtp_hid i915(E) drm_kms_helper syscopyarea
psmouse igb sysfillrect sdhci_pci sysimgblt fb_sys_fops sdhci dca ptp
drm pps_core ahci intel_ish_ipc i2c_algo_bit libahci intel_ishtp i2c_hid
hid video fjes pinctrl_broxton pinctrl_intel
[ 153.923768] CPU: 1 PID: 1859 Comm: cat Tainted: G U W E
4.10.0-rc6-ww5.5mainlinestaging #12
[ 153.923771] Hardware name: Intel Corp. Broxton P/Apollolake RVP1C,
BIOS APLIRVPA.X64.0151.B24.1609210905 09/21/2016
[ 153.923773] Call Trace:
[ 153.923785] dump_stack+0x63/0x90
[ 153.923791] __warn+0xd1/0xf0
[ 153.923795] warn_slowpath_fmt+0x4f/0x60
[ 153.923803] ? seq_vprintf+0x35/0x50
[ 153.923893] gen9_decoupled_read32+0x1a1/0x1c0 [i915]
[ 153.923969] i915_huc_load_status_info+0x132/0x150 [i915]
[ 153.923974] seq_read+0x119/0x3e0
[ 153.923981] full_proxy_read+0x51/0x80
[ 153.923988] __vfs_read+0x28/0x130
[ 153.923993] ? security_file_permission+0x9d/0xc0
[ 153.923998] ? rw_verify_area+0x4e/0xb0
[ 153.924003] vfs_read+0x93/0x130
[ 153.924009] SyS_read+0x46/0xa0
[ 153.924015] entry_SYSCALL_64_fastpath+0x1e/0xad
[ 153.924019] RIP: 0033:0x7fe18cd44680
[ 153.924022] RSP: 002b:00007ffe7d991eb8 EFLAGS: 00000246 ORIG_RAX:
0000000000000000
[ 153.924027] RAX: ffffffffffffffda RBX: 00007fe18d011b20 RCX:
00007fe18cd44680
[ 153.924030] RDX: 0000000000020000 RSI: 00007fe18d1fb000 RDI:
0000000000000003
[ 153.924032] RBP: 0000000000021010 R08: ffffffffffffffff R09:
0000000000000000
[ 153.924035] R10: 000000000000037b R11: 0000000000000246 R12:
0000000000022000
[ 153.924037] R13: 00007fe18d011b78 R14: 0000000000001000 R15:
0000000000020000
[ 153.924042] ---[ end trace 6529f5b46f5753d0 ]---
[ 153.974135] [drm:__gen9_decoupled_mmio_access [i915]] *ERROR*
Decoupled MMIO wait timed out
>
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2017-02-06 5:04 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-02-03 8:28 [PATCH v2 1/1] drm/i915: Do RPM Wake during GuC/HuC status read Sagar Arun Kamble
2017-02-03 8:54 ` ✓ Fi.CI.BAT: success for series starting with [v2,1/1] " Patchwork
2017-02-16 10:07 ` Tvrtko Ursulin
2017-02-04 14:10 ` [PATCH v2 1/1] " Arkadiusz Hiler
2017-02-06 5:04 ` Kamble, Sagar A [this message]
2017-02-07 13:20 ` Arkadiusz Hiler
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=c6dab917-a328-e8d0-70cc-2e5cdafc3beb@intel.com \
--to=sagar.a.kamble@intel.com \
--cc=arkadiusz.hiler@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox