From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
To: intel-xe@lists.freedesktop.org
Cc: intel-gfx@lists.freedesktop.org,
Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
Maarten@mblankhorst.nl, Lankhorst@mblankhorst.nl,
dev@lankhorst.se
Subject: [PATCH 3/9] drm/xe: Move suballocator init to after display init
Date: Thu, 7 Nov 2024 11:01:34 +0100 [thread overview]
Message-ID: <20241107100140.292928-3-maarten.lankhorst@linux.intel.com> (raw)
In-Reply-To: <20241107100140.292928-1-maarten.lankhorst@linux.intel.com>
No allocations should be done before we have had a chance to preserve
the display fb.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241105121857.17389-3-maarten.lankhorst@linux.intel.com
Signed-off-by: Maarten Lankhorst,,, <dev@lankhorst.se>
---
drivers/gpu/drm/xe/xe_device.c | 6 ++++++
drivers/gpu/drm/xe/xe_tile.c | 12 ++++++++----
drivers/gpu/drm/xe/xe_tile.h | 1 +
3 files changed, 15 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/xe/xe_device.c b/drivers/gpu/drm/xe/xe_device.c
index a0d29d5cb7b70..cef782f244e1a 100644
--- a/drivers/gpu/drm/xe/xe_device.c
+++ b/drivers/gpu/drm/xe/xe_device.c
@@ -730,6 +730,12 @@ int xe_device_probe(struct xe_device *xe)
if (err)
goto err;
+ for_each_tile(tile, xe, id) {
+ err = xe_tile_init(tile);
+ if (err)
+ goto err;
+ }
+
for_each_gt(gt, xe, id) {
last_gt = id;
diff --git a/drivers/gpu/drm/xe/xe_tile.c b/drivers/gpu/drm/xe/xe_tile.c
index 07cf7cfe4abd5..2825553b568f7 100644
--- a/drivers/gpu/drm/xe/xe_tile.c
+++ b/drivers/gpu/drm/xe/xe_tile.c
@@ -170,10 +170,6 @@ int xe_tile_init_noalloc(struct xe_tile *tile)
if (err)
return err;
- tile->mem.kernel_bb_pool = xe_sa_bo_manager_init(tile, SZ_1M, 16);
- if (IS_ERR(tile->mem.kernel_bb_pool))
- return PTR_ERR(tile->mem.kernel_bb_pool);
-
xe_wa_apply_tile_workarounds(tile);
err = xe_tile_sysfs_init(tile);
@@ -181,6 +177,14 @@ int xe_tile_init_noalloc(struct xe_tile *tile)
return 0;
}
+int xe_tile_init(struct xe_tile *tile)
+{
+ tile->mem.kernel_bb_pool = xe_sa_bo_manager_init(tile, SZ_1M, 16);
+ if (IS_ERR(tile->mem.kernel_bb_pool))
+ return PTR_ERR(tile->mem.kernel_bb_pool);
+
+ return 0;
+}
void xe_tile_migrate_wait(struct xe_tile *tile)
{
xe_migrate_wait(tile->migrate);
diff --git a/drivers/gpu/drm/xe/xe_tile.h b/drivers/gpu/drm/xe/xe_tile.h
index 1c9e42ade6b05..eb939316d55b0 100644
--- a/drivers/gpu/drm/xe/xe_tile.h
+++ b/drivers/gpu/drm/xe/xe_tile.h
@@ -12,6 +12,7 @@ struct xe_tile;
int xe_tile_init_early(struct xe_tile *tile, struct xe_device *xe, u8 id);
int xe_tile_init_noalloc(struct xe_tile *tile);
+int xe_tile_init(struct xe_tile *tile);
void xe_tile_migrate_wait(struct xe_tile *tile);
--
2.45.2
next prev parent reply other threads:[~2024-11-07 10:01 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-11-07 10:01 [PATCH 1/9] drm/xe: Remove double pageflip Maarten Lankhorst
2024-11-07 10:01 ` [PATCH 2/9] drm/xe/display: Add intel_plane_initial_vblank_wait Maarten Lankhorst
2024-11-07 11:36 ` [PATCH] " Maarten Lankhorst
2024-11-07 12:21 ` Ville Syrjälä
2024-11-07 17:45 ` Maarten Lankhorst
2024-11-07 10:01 ` Maarten Lankhorst [this message]
2024-11-12 18:18 ` [PATCH 3/9] drm/xe: Move suballocator init to after display init Rodrigo Vivi
2024-11-07 10:01 ` [PATCH 4/9] drm/xe: Defer irq init until after xe_display_init_noaccel Maarten Lankhorst
2024-11-12 18:21 ` Rodrigo Vivi
2024-11-07 10:01 ` [PATCH 5/9] drm/xe/display: Use a single early init call for display Maarten Lankhorst
2024-11-12 18:39 ` Rodrigo Vivi
2024-11-13 10:30 ` Maarten Lankhorst
2024-11-14 16:05 ` Rodrigo Vivi
2024-11-07 10:01 ` [PATCH 6/9] drm/xe/sriov: Move VF bootstrap and query_config to vf_guc_init Maarten Lankhorst
2024-11-14 16:09 ` Rodrigo Vivi
2024-11-15 14:21 ` Maarten Lankhorst
2024-11-15 19:06 ` Rodrigo Vivi
2024-11-15 19:50 ` Maarten Lankhorst
2024-11-15 20:02 ` Rodrigo Vivi
2024-11-15 20:51 ` Maarten Lankhorst
2024-11-07 10:01 ` [PATCH 7/9] drm/xe: Simplify GuC early initialisation Maarten Lankhorst
2024-11-07 10:01 ` [PATCH 8/9] drm/xe: Make it possible to read instance0 MCR registers after xe_gt_mcr_init_early Maarten Lankhorst
2024-11-07 10:01 ` [PATCH 9/9] drm/xe: Split init of xe_gt_init_hwconfig to xe_gt_init and *_early Maarten Lankhorst
2024-11-07 10:08 ` ✓ CI.Patch_applied: success for series starting with [1/9] drm/xe: Remove double pageflip Patchwork
2024-11-07 10:08 ` ✗ CI.checkpatch: warning " Patchwork
2024-11-07 10:09 ` ✓ CI.KUnit: success " Patchwork
2024-11-07 10:14 ` ✗ CI.Build: failure " Patchwork
2024-11-07 12:57 ` ✓ CI.Patch_applied: success for series starting with [1/9] drm/xe: Remove double pageflip (rev2) Patchwork
2024-11-07 12:57 ` ✗ CI.checkpatch: warning " Patchwork
2024-11-07 12:59 ` ✓ CI.KUnit: success " Patchwork
2024-11-07 13:10 ` ✓ CI.Build: " Patchwork
2024-11-07 13:12 ` ✓ CI.Hooks: " Patchwork
2024-11-07 13:14 ` ✗ CI.checksparse: warning " Patchwork
2024-11-07 13:52 ` ✓ CI.BAT: success " Patchwork
2024-11-08 20:13 ` ✗ CI.FULL: failure " Patchwork
-- strict thread matches above, loose matches on Subject: below --
2024-11-05 12:18 [PATCH 1/9] drm/xe: Remove double pageflip Maarten Lankhorst
2024-11-05 12:18 ` [PATCH 3/9] drm/xe: Move suballocator init to after display init Maarten Lankhorst
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241107100140.292928-3-maarten.lankhorst@linux.intel.com \
--to=maarten.lankhorst@linux.intel.com \
--cc=Lankhorst@mblankhorst.nl \
--cc=Maarten@mblankhorst.nl \
--cc=dev@lankhorst.se \
--cc=intel-gfx@lists.freedesktop.org \
--cc=intel-xe@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox