From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: intel-xe@lists.freedesktop.org, intel-gfx@lists.freedesktop.org,
Maarten@mblankhorst.nl, Lankhorst@mblankhorst.nl,
dev@lankhorst.se
Subject: Re: [PATCH] drm/xe/display: Add intel_plane_initial_vblank_wait
Date: Thu, 7 Nov 2024 14:21:59 +0200 [thread overview]
Message-ID: <Zyyw5-E1-Ae5yVBr@intel.com> (raw)
In-Reply-To: <20241107113617.349916-1-maarten.lankhorst@linux.intel.com>
On Thu, Nov 07, 2024 at 12:36:17PM +0100, Maarten Lankhorst wrote:
> We're changing the driver to have no interrupts during early init for
> Xe, so we poll the PIPE_FRMSTMSMP counter instead.
>
> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
> Link: https://patchwork.freedesktop.org/patch/msgid/20241105121857.17389-2-maarten.lankhorst@linux.intel.com
> Signed-off-by: Maarten Lankhorst,,, <dev@lankhorst.se>
> ---
> drivers/gpu/drm/i915/display/intel_display.c | 6 +++---
> .../drm/i915/display/intel_plane_initial.c | 9 ++++++++-
> .../drm/i915/display/intel_plane_initial.h | 2 ++
> drivers/gpu/drm/xe/display/xe_plane_initial.c | 19 ++++++++++++++++++-
> 4 files changed, 31 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> index d7f92dc56d1e9..7bd6da2bb36f7 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.c
> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> @@ -795,7 +795,7 @@ void intel_plane_disable_noatomic(struct intel_crtc *crtc,
> if ((crtc_state->active_planes & ~BIT(PLANE_CURSOR)) == 0 &&
> hsw_ips_disable(crtc_state)) {
> crtc_state->ips_enabled = false;
> - intel_crtc_wait_for_next_vblank(crtc);
> + intel_plane_initial_vblank_wait(plane);
> }
>
> /*
> @@ -809,7 +809,7 @@ void intel_plane_disable_noatomic(struct intel_crtc *crtc,
> */
> if (HAS_GMCH(dev_priv) &&
> intel_set_memory_cxsr(dev_priv, false))
> - intel_crtc_wait_for_next_vblank(crtc);
> + intel_plane_initial_vblank_wait(plane);
>
> /*
> * Gen2 reports pipe underruns whenever all planes are disabled.
> @@ -819,7 +819,7 @@ void intel_plane_disable_noatomic(struct intel_crtc *crtc,
> intel_set_cpu_fifo_underrun_reporting(dev_priv, crtc->pipe, false);
>
> intel_plane_disable_arm(NULL, plane, crtc_state);
> - intel_crtc_wait_for_next_vblank(crtc);
> + intel_plane_initial_vblank_wait(plane);
> }
>
> unsigned int
> diff --git a/drivers/gpu/drm/i915/display/intel_plane_initial.c b/drivers/gpu/drm/i915/display/intel_plane_initial.c
> index 62401f6a04e4f..77eb2b763be5e 100644
> --- a/drivers/gpu/drm/i915/display/intel_plane_initial.c
> +++ b/drivers/gpu/drm/i915/display/intel_plane_initial.c
> @@ -14,6 +14,13 @@
> #include "intel_frontbuffer.h"
> #include "intel_plane_initial.h"
>
> +void intel_plane_initial_vblank_wait(struct intel_plane *plane)
> +{
> + struct intel_crtc *crtc = intel_crtc_for_pipe(to_intel_display(plane->base.dev), plane->pipe);
> +
> + intel_crtc_wait_for_next_vblank(crtc);
> +}
> +
> static bool
> intel_reuse_initial_plane_obj(struct intel_crtc *this,
> const struct intel_initial_plane_config plane_configs[],
> @@ -438,7 +445,7 @@ void intel_initial_plane_config(struct drm_i915_private *i915)
> intel_find_initial_plane_obj(crtc, plane_configs);
>
> if (i915->display.funcs.display->fixup_initial_plane_config(crtc, plane_config))
> - intel_crtc_wait_for_next_vblank(crtc);
> + intel_plane_initial_vblank_wait(to_intel_plane(crtc->base.primary));
>
> plane_config_fini(plane_config);
> }
> diff --git a/drivers/gpu/drm/i915/display/intel_plane_initial.h b/drivers/gpu/drm/i915/display/intel_plane_initial.h
> index 64ab95239cd45..149b1bf1bc1f8 100644
> --- a/drivers/gpu/drm/i915/display/intel_plane_initial.h
> +++ b/drivers/gpu/drm/i915/display/intel_plane_initial.h
> @@ -7,7 +7,9 @@
> #define __INTEL_PLANE_INITIAL_H__
>
> struct drm_i915_private;
> +struct intel_plane;
>
> +void intel_plane_initial_vblank_wait(struct intel_plane *plane);
> void intel_initial_plane_config(struct drm_i915_private *i915);
>
> #endif
> diff --git a/drivers/gpu/drm/xe/display/xe_plane_initial.c b/drivers/gpu/drm/xe/display/xe_plane_initial.c
> index 668f544a7ac80..9252cfeef0a1f 100644
> --- a/drivers/gpu/drm/xe/display/xe_plane_initial.c
> +++ b/drivers/gpu/drm/xe/display/xe_plane_initial.c
> @@ -8,7 +8,9 @@
>
> #include "regs/xe_gtt_defs.h"
> #include "xe_ggtt.h"
> +#include "xe_mmio.h"
>
> +#include "i915_reg.h"
> #include "intel_atomic_plane.h"
> #include "intel_crtc.h"
> #include "intel_display.h"
> @@ -22,6 +24,21 @@
>
> #include <generated/xe_wa_oob.h>
>
> +void intel_plane_initial_vblank_wait(struct intel_plane *plane)
> +{
> + /* Early xe has no irq */
> + struct xe_device *xe = to_xe_device(plane->base.dev);
> + struct xe_reg pipe_frmtmstmp = XE_REG(i915_mmio_reg_offset(PIPE_FRMTMSTMP(plane->pipe)));
> + u32 timestamp;
> + int ret;
> +
> + timestamp = xe_mmio_read32(xe_root_tile_mmio(xe), pipe_frmtmstmp);
> +
> + ret = xe_mmio_wait32_not(xe_root_tile_mmio(xe), pipe_frmtmstmp, ~0U, timestamp, 40000U, ×tamp, false);
> + if (ret < 0)
> + drm_warn(&xe->drm, "waiting for early vblank failed with %i\n", ret);
Why did you change to this from the earlier SURFLIVE approach?
> +}
> +
> static bool
> intel_reuse_initial_plane_obj(struct intel_crtc *this,
> const struct intel_initial_plane_config plane_configs[],
> @@ -293,7 +310,7 @@ void intel_initial_plane_config(struct drm_i915_private *i915)
> intel_find_initial_plane_obj(crtc, plane_configs);
>
> if (i915->display.funcs.display->fixup_initial_plane_config(crtc, plane_config))
> - intel_crtc_wait_for_next_vblank(crtc);
> + intel_plane_initial_vblank_wait(to_intel_plane(crtc->base.primary));
>
> plane_config_fini(plane_config);
> }
> --
> 2.45.2
--
Ville Syrjälä
Intel
next prev parent reply other threads:[~2024-11-07 12:22 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-11-07 10:01 [PATCH 1/9] drm/xe: Remove double pageflip Maarten Lankhorst
2024-11-07 10:01 ` [PATCH 2/9] drm/xe/display: Add intel_plane_initial_vblank_wait Maarten Lankhorst
2024-11-07 11:36 ` [PATCH] " Maarten Lankhorst
2024-11-07 12:21 ` Ville Syrjälä [this message]
2024-11-07 17:45 ` Maarten Lankhorst
2024-11-07 10:01 ` [PATCH 3/9] drm/xe: Move suballocator init to after display init Maarten Lankhorst
2024-11-12 18:18 ` Rodrigo Vivi
2024-11-07 10:01 ` [PATCH 4/9] drm/xe: Defer irq init until after xe_display_init_noaccel Maarten Lankhorst
2024-11-12 18:21 ` Rodrigo Vivi
2024-11-07 10:01 ` [PATCH 5/9] drm/xe/display: Use a single early init call for display Maarten Lankhorst
2024-11-12 18:39 ` Rodrigo Vivi
2024-11-13 10:30 ` Maarten Lankhorst
2024-11-14 16:05 ` Rodrigo Vivi
2024-11-07 10:01 ` [PATCH 6/9] drm/xe/sriov: Move VF bootstrap and query_config to vf_guc_init Maarten Lankhorst
2024-11-14 16:09 ` Rodrigo Vivi
2024-11-15 14:21 ` Maarten Lankhorst
2024-11-15 19:06 ` Rodrigo Vivi
2024-11-15 19:50 ` Maarten Lankhorst
2024-11-15 20:02 ` Rodrigo Vivi
2024-11-15 20:51 ` Maarten Lankhorst
2024-11-07 10:01 ` [PATCH 7/9] drm/xe: Simplify GuC early initialisation Maarten Lankhorst
2024-11-07 10:01 ` [PATCH 8/9] drm/xe: Make it possible to read instance0 MCR registers after xe_gt_mcr_init_early Maarten Lankhorst
2024-11-07 10:01 ` [PATCH 9/9] drm/xe: Split init of xe_gt_init_hwconfig to xe_gt_init and *_early Maarten Lankhorst
2024-11-07 10:08 ` ✓ CI.Patch_applied: success for series starting with [1/9] drm/xe: Remove double pageflip Patchwork
2024-11-07 10:08 ` ✗ CI.checkpatch: warning " Patchwork
2024-11-07 10:09 ` ✓ CI.KUnit: success " Patchwork
2024-11-07 10:14 ` ✗ CI.Build: failure " Patchwork
2024-11-07 12:57 ` ✓ CI.Patch_applied: success for series starting with [1/9] drm/xe: Remove double pageflip (rev2) Patchwork
2024-11-07 12:57 ` ✗ CI.checkpatch: warning " Patchwork
2024-11-07 12:59 ` ✓ CI.KUnit: success " Patchwork
2024-11-07 13:10 ` ✓ CI.Build: " Patchwork
2024-11-07 13:12 ` ✓ CI.Hooks: " Patchwork
2024-11-07 13:14 ` ✗ CI.checksparse: warning " Patchwork
2024-11-07 13:52 ` ✓ CI.BAT: success " Patchwork
2024-11-08 20:13 ` ✗ CI.FULL: failure " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Zyyw5-E1-Ae5yVBr@intel.com \
--to=ville.syrjala@linux.intel.com \
--cc=Lankhorst@mblankhorst.nl \
--cc=Maarten@mblankhorst.nl \
--cc=dev@lankhorst.se \
--cc=intel-gfx@lists.freedesktop.org \
--cc=intel-xe@lists.freedesktop.org \
--cc=maarten.lankhorst@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox