Intel-XE Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: "Jouni Högander" <jouni.hogander@intel.com>
To: intel-gfx@lists.freedesktop.org, intel-xe@lists.freedesktop.org,
	dri-devel@lists.freedesktop.org
Cc: "Jouni Högander" <jouni.hogander@intel.com>,
	"Ankit Nautiyal" <ankit.k.nautiyal@intel.com>
Subject: [PATCH v4 08/12] drm/i915/alpm: Move port alpm configuration
Date: Wed, 21 May 2025 14:53:15 +0300	[thread overview]
Message-ID: <20250521115319.2380655-9-jouni.hogander@intel.com> (raw)
In-Reply-To: <20250521115319.2380655-1-jouni.hogander@intel.com>

It is specified in Bspec where port alpm configuration is supposed to be
performed. Change accordingly.

v2:
  - drop HAS reference
  - ensure PORT_ALPM registers are not writen on older platform

Bspec: 68849
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
---
 drivers/gpu/drm/i915/display/intel_alpm.c    | 48 ++++++++++++--------
 drivers/gpu/drm/i915/display/intel_alpm.h    |  2 +
 drivers/gpu/drm/i915/display/intel_cx0_phy.c |  1 +
 drivers/gpu/drm/i915/display/intel_ddi.c     |  6 +++
 4 files changed, 39 insertions(+), 18 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_alpm.c b/drivers/gpu/drm/i915/display/intel_alpm.c
index bbcf510b0c25..dfdde8e4eabe 100644
--- a/drivers/gpu/drm/i915/display/intel_alpm.c
+++ b/drivers/gpu/drm/i915/display/intel_alpm.c
@@ -336,7 +336,6 @@ static void lnl_alpm_configure(struct intel_dp *intel_dp,
 {
 	struct intel_display *display = to_intel_display(intel_dp);
 	enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;
-	enum port port = dp_to_dig_port(intel_dp)->base.port;
 	u32 alpm_ctl;
 
 	if (DISPLAY_VER(display) < 20 || (!intel_psr_needs_alpm(intel_dp, crtc_state) &&
@@ -368,23 +367,6 @@ static void lnl_alpm_configure(struct intel_dp *intel_dp,
 				       pr_alpm_ctl);
 		}
 
-		intel_de_write(display,
-			       PORT_ALPM_CTL(port),
-			       PORT_ALPM_CTL_ALPM_AUX_LESS_ENABLE |
-			       PORT_ALPM_CTL_MAX_PHY_SWING_SETUP(15) |
-			       PORT_ALPM_CTL_MAX_PHY_SWING_HOLD(0) |
-			       PORT_ALPM_CTL_SILENCE_PERIOD(
-				       intel_dp->alpm_parameters.silence_period_sym_clocks));
-
-		intel_de_write(display,
-			       PORT_ALPM_LFPS_CTL(port),
-			       PORT_ALPM_LFPS_CTL_LFPS_CYCLE_COUNT(10) |
-			       PORT_ALPM_LFPS_CTL_LFPS_HALF_CYCLE_DURATION(
-				       intel_dp->alpm_parameters.lfps_half_cycle_num_of_syms) |
-			       PORT_ALPM_LFPS_CTL_FIRST_LFPS_HALF_CYCLE_DURATION(
-				       intel_dp->alpm_parameters.lfps_half_cycle_num_of_syms) |
-			       PORT_ALPM_LFPS_CTL_LAST_LFPS_HALF_CYCLE_DURATION(
-				       intel_dp->alpm_parameters.lfps_half_cycle_num_of_syms));
 	} else {
 		alpm_ctl = ALPM_CTL_EXTENDED_FAST_WAKE_ENABLE |
 			ALPM_CTL_EXTENDED_FAST_WAKE_TIME(intel_dp->alpm_parameters.fast_wake_lines);
@@ -408,6 +390,36 @@ void intel_alpm_configure(struct intel_dp *intel_dp,
 	intel_dp->alpm_parameters.transcoder = crtc_state->cpu_transcoder;
 }
 
+void intel_alpm_port_configure(struct intel_dp *intel_dp,
+			       const struct intel_crtc_state *crtc_state)
+{
+	struct intel_display *display = to_intel_display(intel_dp);
+	enum port port = dp_to_dig_port(intel_dp)->base.port;
+	u32 alpm_ctl_val = 0, lfps_ctl_val = 0;
+
+	if (DISPLAY_VER(display) < 20)
+		return;
+
+	if (intel_alpm_is_alpm_aux_less(intel_dp, crtc_state)) {
+		alpm_ctl_val = PORT_ALPM_CTL_ALPM_AUX_LESS_ENABLE |
+			PORT_ALPM_CTL_MAX_PHY_SWING_SETUP(15) |
+			PORT_ALPM_CTL_MAX_PHY_SWING_HOLD(0) |
+			PORT_ALPM_CTL_SILENCE_PERIOD(
+				intel_dp->alpm_parameters.silence_period_sym_clocks);
+		lfps_ctl_val = PORT_ALPM_LFPS_CTL_LFPS_CYCLE_COUNT(10) |
+			PORT_ALPM_LFPS_CTL_LFPS_HALF_CYCLE_DURATION(
+				intel_dp->alpm_parameters.lfps_half_cycle_num_of_syms) |
+			PORT_ALPM_LFPS_CTL_FIRST_LFPS_HALF_CYCLE_DURATION(
+				intel_dp->alpm_parameters.lfps_half_cycle_num_of_syms) |
+			PORT_ALPM_LFPS_CTL_LAST_LFPS_HALF_CYCLE_DURATION(
+				intel_dp->alpm_parameters.lfps_half_cycle_num_of_syms);
+	}
+
+	intel_de_write(display, PORT_ALPM_CTL(port), alpm_ctl_val);
+
+	intel_de_write(display, PORT_ALPM_LFPS_CTL(port), lfps_ctl_val);
+}
+
 void intel_alpm_pre_plane_update(struct intel_atomic_state *state,
 				 struct intel_crtc *crtc)
 {
diff --git a/drivers/gpu/drm/i915/display/intel_alpm.h b/drivers/gpu/drm/i915/display/intel_alpm.h
index 86f4d5ab1981..a861c20b5d79 100644
--- a/drivers/gpu/drm/i915/display/intel_alpm.h
+++ b/drivers/gpu/drm/i915/display/intel_alpm.h
@@ -27,6 +27,8 @@ void intel_alpm_enable_sink(struct intel_dp *intel_dp,
 			    const struct intel_crtc_state *crtc_state);
 void intel_alpm_pre_plane_update(struct intel_atomic_state *state,
 				 struct intel_crtc *crtc);
+void intel_alpm_port_configure(struct intel_dp *intel_dp,
+			       const struct intel_crtc_state *crtc_state);
 void intel_alpm_post_plane_update(struct intel_atomic_state *state,
 				  struct intel_crtc *crtc);
 void intel_alpm_lobf_debugfs_add(struct intel_connector *connector);
diff --git a/drivers/gpu/drm/i915/display/intel_cx0_phy.c b/drivers/gpu/drm/i915/display/intel_cx0_phy.c
index a82b93cbc81d..91118d115fd3 100644
--- a/drivers/gpu/drm/i915/display/intel_cx0_phy.c
+++ b/drivers/gpu/drm/i915/display/intel_cx0_phy.c
@@ -10,6 +10,7 @@
 
 #include "i915_reg.h"
 #include "i915_utils.h"
+#include "intel_alpm.h"
 #include "intel_cx0_phy.h"
 #include "intel_cx0_phy_regs.h"
 #include "intel_ddi.h"
diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c
index 0e6d618b5356..65ab012c3eae 100644
--- a/drivers/gpu/drm/i915/display/intel_ddi.c
+++ b/drivers/gpu/drm/i915/display/intel_ddi.c
@@ -3743,6 +3743,12 @@ static void mtl_ddi_prepare_link_retrain(struct intel_dp *intel_dp,
 
 	intel_ddi_buf_enable(encoder, intel_dp->DP);
 	intel_dp->DP |= DDI_BUF_CTL_ENABLE;
+
+	/*
+	 * 6.k If AUX-Less ALPM is going to be enabled
+	 *     i. Configure PORT_ALPM_CTL and PORT_ALPM_LFPS_CTL here
+	 */
+	intel_alpm_port_configure(intel_dp, crtc_state);
 }
 
 static void intel_ddi_prepare_link_retrain(struct intel_dp *intel_dp,
-- 
2.43.0


  parent reply	other threads:[~2025-05-21 11:54 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-05-21 11:53 [PATCH v4 00/12] Panel Replay + Adaptive sync Jouni Högander
2025-05-21 11:53 ` [PATCH v4 01/12] drm/panelreplay: Panel Replay capability DPCD register definitions Jouni Högander
2025-05-21 11:53 ` [PATCH v4 02/12] drm/dp: Add Panel Replay capability bits from DP2.1 specification Jouni Högander
2025-05-21 12:16   ` Nautiyal, Ankit K
2025-05-21 11:53 ` [PATCH v4 03/12] drm/i915/psr: Read all Panel Replay capability registers from DPCD Jouni Högander
2025-05-21 11:53 ` [PATCH v4 04/12] drm/i915/alpm: Add PR_ALPM_CTL register definitions Jouni Högander
2025-05-21 11:53 ` [PATCH v4 05/12] drm/i915/alpm: Write PR_ALPM_CTL register Jouni Högander
2025-05-21 11:53 ` [PATCH v4 06/12] drm/i915/psr: Add interface to check if AUXLess ALPM is needed by PSR Jouni Högander
2025-05-21 11:53 ` [PATCH v4 07/12] drm/i915/alpm: Add new interface to check if AUXLess ALPM is used Jouni Högander
2025-05-21 11:53 ` Jouni Högander [this message]
2025-05-21 11:53 ` [PATCH v4 09/12] drm/i915/display: Add PHY_CMN1_CONTROL register definitions Jouni Högander
2025-05-21 11:53 ` [PATCH v4 10/12] drm/i915/display: Add function to configure LFPS sending Jouni Högander
2025-05-21 11:53 ` [PATCH v4 11/12] drm/i915/psr: Fix using wrong mask in REG_FIELD_PREP Jouni Högander
2025-05-21 11:53 ` [PATCH v4 12/12] drm/i915/psr: Do not disable Panel Replay in case VRR is enabled Jouni Högander
2025-05-22  5:25 ` [PATCH v4 00/12] Panel Replay + Adaptive sync Hogander, Jouni
2025-05-26 11:43   ` Maarten Lankhorst
2025-05-29  5:33     ` Hogander, Jouni
  -- strict thread matches above, loose matches on Subject: below --
2025-05-26 12:05 Jouni Högander
2025-05-26 12:05 ` [PATCH v4 08/12] drm/i915/alpm: Move port alpm configuration Jouni Högander

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250521115319.2380655-9-jouni.hogander@intel.com \
    --to=jouni.hogander@intel.com \
    --cc=ankit.k.nautiyal@intel.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=intel-xe@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox