[PATCH v9 02/17] drm/i915/dmc: Add pipe dmc registers and bits for DC Balance

[Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>]

From: Ville Syrjälä <ville.syrjala@linux.intel.com>

Add pipe dmc registers and  access bits for DC Balance params
configuration and enablement.

--v2:
- Separate register definitions for transcoder and
pipe dmc. (Ankit)
- Use MMIO pipe macros instead of transcoder ones. (Ankit)
- Remove dev_priv use. (Jani, Nikula)

--v3:
- Add all register address, from capital alphabet to small. (Ankit)
- Add EVT CTL registers.
- Add co-author tag.
- Add event flag for Triggering DC Balance.

--v4:
- Add DCB Flip count and balance reset registers.

--v5:
- Correct macro usage for flip count. (Ankit)
- Use register offset in lower case.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
---
 drivers/gpu/drm/i915/display/intel_dmc_regs.h | 60 +++++++++++++++++++
 1 file changed, 60 insertions(+)

diff --git a/drivers/gpu/drm/i915/display/intel_dmc_regs.h b/drivers/gpu/drm/i915/display/intel_dmc_regs.h
index c5aa49921cb9..38e342b45af0 100644
--- a/drivers/gpu/drm/i915/display/intel_dmc_regs.h
+++ b/drivers/gpu/drm/i915/display/intel_dmc_regs.h
@@ -584,4 +584,64 @@ enum pipedmc_event_id {
 #define PTL_PIPEDMC_EXEC_TIME_LINES(start_mmioaddr) _MMIO((start_mmioaddr) + 0x6b8)
 #define PTL_PIPEDMC_END_OF_EXEC_GB(start_mmioaddr) _MMIO((start_mmioaddr) + 0x6c0)
 
+#define _PIPEDMC_DCB_CTL_A			0x5f1a0
+#define _PIPEDMC_DCB_CTL_B			0x5f5a0
+#define PIPEDMC_DCB_CTL(pipe)			_MMIO_PIPE((pipe), _PIPEDMC_DCB_CTL_A,\
+							   _PIPEDMC_DCB_CTL_B)
+#define  PIPEDMC_ADAPTIVE_DCB_ENABLE		REG_BIT(31)
+
+#define _PIPEDMC_DCB_VBLANK_A			0x5f1bc
+#define _PIPEDMC_DCB_VBLANK_B			0x5f5bc
+#define PIPEDMC_DCB_VBLANK(pipe)		_MMIO_PIPE((pipe), _PIPEDMC_DCB_VBLANK_A,\
+							   _PIPEDMC_DCB_VBLANK_B)
+
+#define _PIPEDMC_DCB_SLOPE_A			0x5f1b8
+#define _PIPEDMC_DCB_SLOPE_B			0x5f5b8
+#define PIPEDMC_DCB_SLOPE(pipe)			_MMIO_PIPE((pipe), _PIPEDMC_DCB_SLOPE_A,\
+							   _PIPEDMC_DCB_SLOPE_B)
+
+#define _PIPEDMC_DCB_GUARDBAND_A		0x5f1b4
+#define _PIPEDMC_DCB_GUARDBAND_B		0x5f5b4
+#define PIPEDMC_DCB_GUARDBAND(pipe)		_MMIO_PIPE((pipe), _PIPEDMC_DCB_GUARDBAND_A,\
+							   _PIPEDMC_DCB_GUARDBAND_B)
+
+#define _PIPEDMC_DCB_MAX_INCREASE_A		0x5f1ac
+#define _PIPEDMC_DCB_MAX_INCREASE_B		0x5f5ac
+#define PIPEDMC_DCB_MAX_INCREASE(pipe)		_MMIO_PIPE((pipe), _PIPEDMC_DCB_MAX_INCREASE_A,\
+							   _PIPEDMC_DCB_MAX_INCREASE_B)
+
+#define _PIPEDMC_DCB_MAX_DECREASE_A		0x5f1b0
+#define _PIPEDMC_DCB_MAX_DECREASE_B		0x5f5b0
+#define PIPEDMC_DCB_MAX_DECREASE(pipe)		_MMIO_PIPE((pipe), _PIPEDMC_DCB_MAX_DECREASE_A,\
+							   _PIPEDMC_DCB_MAX_DECREASE_B)
+
+#define _PIPEDMC_DCB_VMIN_A			0x5f1a4
+#define _PIPEDMC_DCB_VMIN_B			0x5f5a4
+#define PIPEDMC_DCB_VMIN(pipe)			_MMIO_PIPE((pipe), _PIPEDMC_DCB_VMIN_A,\
+							   _PIPEDMC_DCB_VMIN_B)
+
+#define _PIPEDMC_DCB_VMAX_A			0x5f1a8
+#define _PIPEDMC_DCB_VMAX_B			0x5f5a8
+#define PIPEDMC_DCB_VMAX(pipe)			_MMIO_PIPE((pipe), _PIPEDMC_DCB_VMAX_A,\
+							   _PIPEDMC_DCB_VMAX_B)
+
+#define _PIPEDMC_DCB_DEBUG_A			0x5f1c0
+#define _PIPEDMC_DCB_DEBUG_B			0x5f5c0
+#define PIPEDMC_DCB_DEBUG(pipe)			_MMIO_PIPE(pipe, _PIPEDMC_DCB_DEBUG_A,\
+							   _PIPEDMC_DCB_DEBUG_B)
+
+#define _PIPEDMC_EVT_CTL_3_A			0x5f040
+#define _PIPEDMC_EVT_CTL_3_B			0x5f440
+#define PIPEDMC_EVT_CTL_3(pipe)			_MMIO_PIPE(pipe, _PIPEDMC_EVT_CTL_3_A,\
+							   _PIPEDMC_EVT_CTL_3_B)
+
+#define _PIPEDMC_DCB_FLIP_COUNT_A		0x906a4
+#define _PIPEDMC_DCB_FLIP_COUNT_B		0x986a4
+#define PIPEDMC_DCB_FLIP_COUNT(pipe)		_MMIO_PIPE(pipe, _PIPEDMC_DCB_FLIP_COUNT_A,\
+							   _PIPEDMC_DCB_FLIP_COUNT_B)
+
+#define _PIPEDMC_DCB_BALANCE_RESET_A		0x906a8
+#define _PIPEDMC_DCB_BALANCE_RESET_B		0x986a8
+#define PIPEDMC_DCB_BALANCE_RESET(pipe)		_MMIO_PIPE(pipe, _PIPEDMC_DCB_BALANCE_RESET_A,\
+							   _PIPEDMC_DCB_BALANCE_RESET_B)
 #endif /* __INTEL_DMC_REGS_H__ */
-- 
2.48.1