From: Matthew Brost <matthew.brost@intel.com>
To: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Cc: <intel-xe@lists.freedesktop.org>,
<thomas.hellstrom@linux.intel.com>, <oak.zeng@intel.com>
Subject: Re: [RFC 05/29] drm/xe/svm: Make xe_svm_range_* end/start/size public
Date: Thu, 27 Mar 2025 15:46:56 -0700 [thread overview]
Message-ID: <Z+XVYB65e4Z63FaK@lstrano-desk.jf.intel.com> (raw)
In-Reply-To: <20250314080226.2059819-6-himal.prasad.ghimiray@intel.com>
On Fri, Mar 14, 2025 at 01:32:02PM +0530, Himal Prasad Ghimiray wrote:
> These functions will be used in prefetch too, therefore make them public.
>
> Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
> ---
> drivers/gpu/drm/xe/xe_svm.c | 15 ---------------
> drivers/gpu/drm/xe/xe_svm.h | 32 ++++++++++++++++++++++++++++++++
> 2 files changed, 32 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/gpu/drm/xe/xe_svm.c b/drivers/gpu/drm/xe/xe_svm.c
> index 2b041f44730b..07511011aba6 100644
> --- a/drivers/gpu/drm/xe/xe_svm.c
> +++ b/drivers/gpu/drm/xe/xe_svm.c
> @@ -35,21 +35,6 @@ static struct xe_vm *range_to_vm(struct drm_gpusvm_range *r)
> return gpusvm_to_vm(r->gpusvm);
> }
>
> -static unsigned long xe_svm_range_start(struct xe_svm_range *range)
> -{
> - return drm_gpusvm_range_start(&range->base);
> -}
> -
> -static unsigned long xe_svm_range_end(struct xe_svm_range *range)
> -{
> - return drm_gpusvm_range_end(&range->base);
> -}
> -
> -static unsigned long xe_svm_range_size(struct xe_svm_range *range)
> -{
> - return drm_gpusvm_range_size(&range->base);
> -}
> -
> #define range_debug(r__, operaton__) \
> vm_dbg(&range_to_vm(&(r__)->base)->xe->drm, \
> "%s: asid=%u, gpusvm=%p, vram=%d,%d, seqno=%lu, " \
> diff --git a/drivers/gpu/drm/xe/xe_svm.h b/drivers/gpu/drm/xe/xe_svm.h
> index 1af245400799..c8add37614ec 100644
> --- a/drivers/gpu/drm/xe/xe_svm.h
> +++ b/drivers/gpu/drm/xe/xe_svm.h
> @@ -165,6 +165,38 @@ static inline bool xe_svm_range_has_dma_mapping(struct xe_svm_range *range)
> return range->base.flags.has_dma_mapping;
> }
>
> +/**
> + * xe_svm_range_start() - SVM range start address
> + * @range: SVM range
> + *
> + * Return: start address of range.
> + */
> +static inline unsigned long xe_svm_range_start(struct xe_svm_range *range)
> +{
> + return drm_gpusvm_range_start(&range->base);
> +}
> +
> +/**
> + * xe_svm_range_start() - SVM range end address
> + * @range: SVM range
> + *
> + * Return: end address of range.
> + */
> +static inline unsigned long xe_svm_range_end(struct xe_svm_range *range)
> +{
> + return drm_gpusvm_range_end(&range->base);
> +}
> +
> +/**
> + * xe_svm_range_start() - SVM range size
> + * @range: SVM range
> + *
> + * Return: Size of range.
> + */
> +static inline unsigned long xe_svm_range_size(struct xe_svm_range *range)
> +{
> + return drm_gpusvm_range_size(&range->base);
> +}
Need an extra newline here.
With that:
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
> #define xe_svm_assert_in_notifier(vm__) \
> lockdep_assert_held_write(&(vm__)->svm.gpusvm.notifier_lock)
>
> --
> 2.34.1
>
next prev parent reply other threads:[~2025-03-27 22:45 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-03-14 8:01 [RFC 00/29] PREFETCH and MADVISE for SVM ranges Himal Prasad Ghimiray
2025-03-14 8:01 ` [RFC 01/29] drm/xe: Introduce xe_vma_op_prefetch_range struct for prefetch of ranges Himal Prasad Ghimiray
2025-04-03 20:59 ` Matthew Brost
2025-03-14 8:01 ` [RFC 02/29] drm/xe: Make xe_svm_alloc_vram public Himal Prasad Ghimiray
2025-03-27 22:45 ` Matthew Brost
2025-03-28 7:51 ` Ghimiray, Himal Prasad
2025-03-14 8:02 ` [RFC 03/29] drm/xe/svm: Helper to add tile masks to svm ranges Himal Prasad Ghimiray
2025-03-14 8:02 ` [RFC 04/29] drm/xe/svm: Make to_xe_range a public function Himal Prasad Ghimiray
2025-03-28 2:57 ` Matthew Brost
2025-03-14 8:02 ` [RFC 05/29] drm/xe/svm: Make xe_svm_range_* end/start/size public Himal Prasad Ghimiray
2025-03-27 22:46 ` Matthew Brost [this message]
2025-03-14 8:02 ` [RFC 06/29] drm/xe/vm: Update xe_vma_ops_incr_pt_update_ops to take an increment value Himal Prasad Ghimiray
2025-03-28 2:56 ` Matthew Brost
2025-03-28 7:52 ` Ghimiray, Himal Prasad
2025-03-14 8:02 ` [RFC 07/29] drm/xe/vm: Add an identifier in xe_vma_ops for svm prefetch Himal Prasad Ghimiray
2025-03-27 22:49 ` Matthew Brost
2025-03-28 7:53 ` Ghimiray, Himal Prasad
2025-03-14 8:02 ` [RFC 08/29] drm/xe: Rename lookup_vma function to xe_find_vma_by_addr Himal Prasad Ghimiray
2025-04-03 21:02 ` Matthew Brost
2025-04-07 6:16 ` Ghimiray, Himal Prasad
2025-03-14 8:02 ` [RFC 09/29] drm/xe/svm: Allow unaligned addresses and ranges for prefetch Himal Prasad Ghimiray
2025-04-03 20:52 ` Matthew Brost
2025-04-07 6:15 ` Ghimiray, Himal Prasad
2025-03-14 8:02 ` [RFC 10/29] drm/xe/svm: Refactor usage of drm_gpusvm* function in xe_svm Himal Prasad Ghimiray
2025-04-03 20:54 ` Matthew Brost
2025-04-07 6:15 ` Ghimiray, Himal Prasad
2025-03-14 8:02 ` [RFC 11/29] drm/xe/svm: Implement prefetch support for SVM ranges Himal Prasad Ghimiray
2025-03-14 8:02 ` [RFC 12/29] drm/xe/vm: Add debug prints for SVM range prefetch Himal Prasad Ghimiray
2025-03-14 8:02 ` [RFC 13/29] drm/gpuvm: Introduce MADVISE Operations Himal Prasad Ghimiray
2025-03-14 8:46 ` Ghimiray, Himal Prasad
2025-03-17 14:27 ` Danilo Krummrich
2025-03-18 11:58 ` Ghimiray, Himal Prasad
2025-03-14 8:02 ` [RFC 14/29] drm/xe/uapi: Add madvise interface Himal Prasad Ghimiray
2025-03-14 8:02 ` [RFC 15/29] drm/xe/vm: Add attributes struct as member of vma Himal Prasad Ghimiray
2025-03-14 8:02 ` [RFC 16/29] drm/xe/vma: Move pat_index to vma attributes Himal Prasad Ghimiray
2025-03-14 8:02 ` [RFC 17/29] drm/xe/vma: Modify new_vma to accept struct xe_vma_mem_attr as parameter Himal Prasad Ghimiray
2025-03-14 8:02 ` [RFC 18/29] drm/gpusvm: Make drm_gpusvm_for_each_* macros public Himal Prasad Ghimiray
2025-03-14 8:02 ` [RFC 19/29] drm/xe/svm: Split system allocator vma incase of madvise call Himal Prasad Ghimiray
2025-03-14 8:02 ` [RFC 20/29] drm/xe: Implement madvise ioctl for xe Himal Prasad Ghimiray
2025-03-14 8:02 ` [RFC 21/29] drm/xe: Allow CPU address mirror VMA unbind with gpu bindings for madvise Himal Prasad Ghimiray
2025-03-14 8:02 ` [RFC 22/29] drm/xe/svm : Add svm ranges migration policy on atomic access Himal Prasad Ghimiray
2025-03-14 8:02 ` [RFC 23/29] drm/xe/madvise: Update migration policy based on preferred location Himal Prasad Ghimiray
2025-03-14 8:02 ` [RFC 24/29] drm/xe/svm: Support DRM_XE_SVM_ATTR_PAT memory attribute Himal Prasad Ghimiray
2025-03-14 8:02 ` [RFC 25/29] drm/xe/uapi: Add flag for consulting madvise hints on svm prefetch Himal Prasad Ghimiray
2025-05-14 19:26 ` Matthew Brost
2025-03-14 8:02 ` [RFC 26/29] drm/xe/svm: Consult madvise preferred location in prefetch Himal Prasad Ghimiray
2025-03-14 8:02 ` [RFC 27/29] drm/xe/uapi: Add uapi for vma count and mem attributes Himal Prasad Ghimiray
2025-05-14 19:39 ` Matthew Brost
2025-03-14 8:02 ` [RFC 28/29] drm/xe/bo: Add attributes field to xe_bo Himal Prasad Ghimiray
2025-05-14 19:35 ` Matthew Brost
2025-03-14 8:02 ` [RFC 29/29] drm/xe/bo : Update atomic_access attribute on madvise Himal Prasad Ghimiray
2025-03-14 15:00 ` ✗ CI.Patch_applied: failure for PREFETCH and MADVISE for SVM ranges (rev2) Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Z+XVYB65e4Z63FaK@lstrano-desk.jf.intel.com \
--to=matthew.brost@intel.com \
--cc=himal.prasad.ghimiray@intel.com \
--cc=intel-xe@lists.freedesktop.org \
--cc=oak.zeng@intel.com \
--cc=thomas.hellstrom@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox