From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: intel-gfx@lists.freedesktop.org, intel-xe@lists.freedesktop.org,
suraj.kandpal@intel.com
Subject: Re: [PATCH 03/16] drm/i915/display: Modify debugfs for joiner to force n pipes
Date: Mon, 23 Sep 2024 21:36:49 +0300 [thread overview]
Message-ID: <ZvG1QcolBpk4EGp6@intel.com> (raw)
In-Reply-To: <20240923181336.3303940-4-ankit.k.nautiyal@intel.com>
On Mon, Sep 23, 2024 at 11:43:23PM +0530, Ankit Nautiyal wrote:
> At the moment, the debugfs for joiner allows only to force enable/disable
> pipe joiner for 2 pipes. Modify it to force join 'n' number of pipes,
> where n is a valid pipe joiner configuration.
> This will help in case of ultra joiner where 4 pipes are joined.
>
> v2:
> -Fix commit message to state that only valid joiner config can be
> forced. (Suraj)
> -Rename the identifiers to have INTEL_BIG/NONE_JOINER_PIPES. (Suraj)
> v3:
> -Avoid enum for joiner pipe counts, use bare numbers for better
> readability. (Ville)
> -Remove redundant prints from debugfs. (Ville)
> v4: Return -EINVAL if joiner forced to an invalid value.
> v5: Remove extra debug message. (Ville)
>
> Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
> ---
> .../drm/i915/display/intel_display_debugfs.c | 58 ++++++++++++++++++-
> .../drm/i915/display/intel_display_types.h | 2 +-
> drivers/gpu/drm/i915/display/intel_dp.c | 2 +-
> 3 files changed, 58 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_display_debugfs.c b/drivers/gpu/drm/i915/display/intel_display_debugfs.c
> index 6ded0a22d401..80c499d642dc 100644
> --- a/drivers/gpu/drm/i915/display/intel_display_debugfs.c
> +++ b/drivers/gpu/drm/i915/display/intel_display_debugfs.c
> @@ -1316,6 +1316,60 @@ static int intel_crtc_pipe_show(struct seq_file *m, void *unused)
> }
> DEFINE_SHOW_ATTRIBUTE(intel_crtc_pipe);
>
> +static int i915_joiner_show(struct seq_file *m, void *data)
> +{
> + struct intel_connector *connector = m->private;
> +
> + seq_printf(m, "%d\n", connector->force_joined_pipes);
> +
> + return 0;
> +}
> +
> +static ssize_t i915_joiner_write(struct file *file,
> + const char __user *ubuf,
> + size_t len, loff_t *offp)
> +{
> + struct seq_file *m = file->private_data;
> + struct intel_connector *connector = m->private;
> + int force_joined_pipes = 0;
> + int ret;
> +
> + if (len == 0)
> + return 0;
> +
> + ret = kstrtoint_from_user(ubuf, len, 0, &force_joined_pipes);
> + if (ret < 0)
> + return ret;
> +
> + switch (force_joined_pipes) {
> + case 0:
> + break;
The break shouldn't be here. We want to set connector->force_joined_pipes
for both values.
With that fixed
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> + case 2:
> + connector->force_joined_pipes = force_joined_pipes;
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + *offp += len;
> +
> + return len;
> +}
> +
> +static int i915_joiner_open(struct inode *inode, struct file *file)
> +{
> + return single_open(file, i915_joiner_show, inode->i_private);
> +}
> +
> +static const struct file_operations i915_joiner_fops = {
> + .owner = THIS_MODULE,
> + .open = i915_joiner_open,
> + .read = seq_read,
> + .llseek = seq_lseek,
> + .release = single_release,
> + .write = i915_joiner_write
> +};
> +
> /**
> * intel_connector_debugfs_add - add i915 specific connector debugfs files
> * @connector: pointer to a registered intel_connector
> @@ -1366,8 +1420,8 @@ void intel_connector_debugfs_add(struct intel_connector *connector)
> if (intel_dp_has_joiner(intel_dp) &&
> (connector_type == DRM_MODE_CONNECTOR_DisplayPort ||
> connector_type == DRM_MODE_CONNECTOR_eDP)) {
> - debugfs_create_bool("i915_bigjoiner_force_enable", 0644, root,
> - &connector->force_bigjoiner_enable);
> + debugfs_create_file("i915_joiner_force_enable", 0644, root,
> + connector, &i915_joiner_fops);
> }
>
> if (connector_type == DRM_MODE_CONNECTOR_DSI ||
> diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h b/drivers/gpu/drm/i915/display/intel_display_types.h
> index b1eed230285a..2a9806f93e63 100644
> --- a/drivers/gpu/drm/i915/display/intel_display_types.h
> +++ b/drivers/gpu/drm/i915/display/intel_display_types.h
> @@ -524,7 +524,7 @@ struct intel_connector {
>
> struct intel_dp *mst_port;
>
> - bool force_bigjoiner_enable;
> + int force_joined_pipes;
>
> struct {
> struct drm_dp_aux *dsc_decompression_aux;
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
> index 16dc1d26d2a2..a1a64758d30d 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> @@ -1274,7 +1274,7 @@ bool intel_dp_need_joiner(struct intel_dp *intel_dp,
> return false;
>
> return clock > i915->display.cdclk.max_dotclk_freq || hdisplay > 5120 ||
> - connector->force_bigjoiner_enable;
> + connector->force_joined_pipes == 2;
> }
>
> bool intel_dp_has_dsc(const struct intel_connector *connector)
> --
> 2.45.2
--
Ville Syrjälä
Intel
next prev parent reply other threads:[~2024-09-23 18:36 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-09-23 18:13 [PATCH 00/16] Ultrajoiner basic functionality series Ankit Nautiyal
2024-09-23 18:13 ` [PATCH 01/16] drm/i915/display_device: Add Check HAS_DSC for bigjoiner Ankit Nautiyal
2024-09-23 18:30 ` Ville Syrjälä
2024-09-23 18:13 ` [PATCH 02/16] drm/i915/display_debugfs: Allow force joiner only if supported Ankit Nautiyal
2024-09-23 18:34 ` Ville Syrjälä
2024-09-23 18:13 ` [PATCH 03/16] drm/i915/display: Modify debugfs for joiner to force n pipes Ankit Nautiyal
2024-09-23 18:36 ` Ville Syrjälä [this message]
2024-09-23 18:13 ` [PATCH 04/16] drm/i915/dp: Add helper to compute num pipes required Ankit Nautiyal
2024-09-23 18:13 ` [PATCH 05/16] drm/i915/display: Add debugfs support to avoid joiner Ankit Nautiyal
2024-09-23 18:38 ` Ville Syrjälä
2024-09-23 18:13 ` [PATCH 06/16] drm/i915: Split current joiner hw state readout Ankit Nautiyal
2024-09-23 18:13 ` [PATCH 07/16] drm/i915: Add bigjoiner and uncompressed joiner hw readout sanity checks Ankit Nautiyal
2024-09-23 18:13 ` [PATCH 08/16] drm/i915/display: Add macro HAS_ULTRAJOINER() Ankit Nautiyal
2024-09-23 18:39 ` Ville Syrjälä
2024-09-23 18:13 ` [PATCH 09/16] drm/i915: Implement hw state readout and checks for ultrajoiner Ankit Nautiyal
2024-09-23 18:44 ` Ville Syrjälä
2024-09-23 18:13 ` [PATCH 10/16] drm/i915/display: Refactor enable_joiner_pipes Ankit Nautiyal
2024-09-23 18:52 ` Ville Syrjälä
2024-09-23 18:13 ` [PATCH 11/16] drm/i915/display/vdsc: Add ultrajoiner support with DSC Ankit Nautiyal
2024-09-23 18:54 ` Ville Syrjälä
2024-09-23 18:13 ` [PATCH 12/16] drm/i915/dp: Modify compressed bpp limitations for ultrajoiner Ankit Nautiyal
2024-09-23 18:32 ` Ankit Nautiyal
2024-09-23 18:13 ` [PATCH 13/16] drm/i915/dp: Modify helper to get slice count " Ankit Nautiyal
2024-09-23 19:04 ` Ville Syrjälä
2024-09-23 18:13 ` [PATCH 14/16] drm/i915: Compute config and mode valid changes " Ankit Nautiyal
2024-09-23 19:06 ` Ville Syrjälä
2024-09-23 18:13 ` [PATCH 15/16] drm/i915/display: Consider ultrajoiner for computing maxdotclock Ankit Nautiyal
2024-09-23 19:08 ` Ville Syrjälä
2024-09-23 18:13 ` [PATCH 16/16] drm/i915/intel_dp: Add support for forcing ultrajoiner Ankit Nautiyal
2024-09-23 19:09 ` Ville Syrjälä
2024-09-25 22:13 ` ✓ CI.Patch_applied: success for Ultrajoiner basic functionality series (rev3) Patchwork
2024-09-25 22:13 ` ✗ CI.checkpatch: warning " Patchwork
2024-09-25 22:15 ` ✓ CI.KUnit: success " Patchwork
2024-09-25 22:26 ` ✓ CI.Build: " Patchwork
2024-09-25 22:29 ` ✓ CI.Hooks: " Patchwork
2024-09-25 22:30 ` ✗ CI.checksparse: warning " Patchwork
2024-09-25 22:59 ` ✗ CI.BAT: failure " Patchwork
2024-09-26 2:40 ` ✗ CI.FULL: " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZvG1QcolBpk4EGp6@intel.com \
--to=ville.syrjala@linux.intel.com \
--cc=ankit.k.nautiyal@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=intel-xe@lists.freedesktop.org \
--cc=suraj.kandpal@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox