From: Jani Nikula <jani.nikula@intel.com>
To: Uma Shankar <uma.shankar@intel.com>,
intel-gfx@lists.freedesktop.org, intel-xe@lists.freedesktop.org
Cc: ville.syrjala@linux.intel.com, Uma Shankar <uma.shankar@intel.com>
Subject: Re: [v2 05/19] drm/{i915, xe}: Extract pcode definitions to common header
Date: Thu, 22 Jan 2026 13:40:48 +0200 [thread overview]
Message-ID: <fe5fb0c8b1c4a4c9df24ef31e278dbfb1f1c3872@intel.com> (raw)
In-Reply-To: <20260121232414.707192-6-uma.shankar@intel.com>
On Thu, 22 Jan 2026, Uma Shankar <uma.shankar@intel.com> wrote:
> There are certain register definitions which are commonly shared
> by i915, xe and display. Extract the same to a common header to
> avoid duplication.
I think starting a big new catch-all file for common registers is the
wrong direction. If we're adding new files, they should be per feature.
In this case, it's pcode registers, and the name should reflect that.
Later in the series more stuff gets added, and more files include it,
but it's not at all clear what they need from there. It would be so much
more obvious if it was per feature.
BR,
Jani.
>
> Move GEN6_PCODE_MAILBOX to common header to make intel_cdclk.c
> free from including i915_reg.h
>
> Signed-off-by: Uma Shankar <uma.shankar@intel.com>
> ---
> drivers/gpu/drm/i915/display/intel_cdclk.c | 2 +-
> drivers/gpu/drm/i915/i915_reg.h | 101 +------------------
> include/drm/intel/intel_gmd_common_regs.h | 108 +++++++++++++++++++++
> 3 files changed, 110 insertions(+), 101 deletions(-)
> create mode 100644 include/drm/intel/intel_gmd_common_regs.h
>
> diff --git a/drivers/gpu/drm/i915/display/intel_cdclk.c b/drivers/gpu/drm/i915/display/intel_cdclk.c
> index 9bfbfbf34dc0..531db1b452d1 100644
> --- a/drivers/gpu/drm/i915/display/intel_cdclk.c
> +++ b/drivers/gpu/drm/i915/display/intel_cdclk.c
> @@ -27,9 +27,9 @@
>
> #include <drm/drm_fixed.h>
> #include <drm/drm_print.h>
> +#include <drm/intel/intel_gmd_common_regs.h>
>
> #include "hsw_ips.h"
> -#include "i915_reg.h"
> #include "intel_atomic.h"
> #include "intel_audio.h"
> #include "intel_cdclk.h"
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index dc13f9eb4cd7..35122c997b8a 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -25,6 +25,7 @@
> #ifndef _I915_REG_H_
> #define _I915_REG_H_
>
> +#include <drm/intel/intel_gmd_common_regs.h>
> #include "i915_reg_defs.h"
> #include "display/intel_display_reg_defs.h"
>
> @@ -956,106 +957,6 @@
> #define EDRAM_WAYS_IDX(cap) (((cap) >> 5) & 0x7)
> #define EDRAM_SETS_IDX(cap) (((cap) >> 8) & 0x3)
>
> -#define GEN6_PCODE_MAILBOX _MMIO(0x138124)
> -#define GEN6_PCODE_READY (1 << 31)
> -#define GEN6_PCODE_MB_PARAM2 REG_GENMASK(23, 16)
> -#define GEN6_PCODE_MB_PARAM1 REG_GENMASK(15, 8)
> -#define GEN6_PCODE_MB_COMMAND REG_GENMASK(7, 0)
> -#define GEN6_PCODE_ERROR_MASK 0xFF
> -#define GEN6_PCODE_SUCCESS 0x0
> -#define GEN6_PCODE_ILLEGAL_CMD 0x1
> -#define GEN6_PCODE_MIN_FREQ_TABLE_GT_RATIO_OUT_OF_RANGE 0x2
> -#define GEN6_PCODE_TIMEOUT 0x3
> -#define GEN6_PCODE_UNIMPLEMENTED_CMD 0xFF
> -#define GEN7_PCODE_TIMEOUT 0x2
> -#define GEN7_PCODE_ILLEGAL_DATA 0x3
> -#define GEN11_PCODE_ILLEGAL_SUBCOMMAND 0x4
> -#define GEN11_PCODE_LOCKED 0x6
> -#define GEN11_PCODE_REJECTED 0x11
> -#define GEN7_PCODE_MIN_FREQ_TABLE_GT_RATIO_OUT_OF_RANGE 0x10
> -#define GEN6_PCODE_WRITE_RC6VIDS 0x4
> -#define GEN6_PCODE_READ_RC6VIDS 0x5
> -#define GEN6_ENCODE_RC6_VID(mv) (((mv) - 245) / 5)
> -#define GEN6_DECODE_RC6_VID(vids) (((vids) * 5) + 245)
> -#define BDW_PCODE_DISPLAY_FREQ_CHANGE_REQ 0x18
> -#define GEN9_PCODE_READ_MEM_LATENCY 0x6
> -#define GEN9_MEM_LATENCY_LEVEL_3_7_MASK REG_GENMASK(31, 24)
> -#define GEN9_MEM_LATENCY_LEVEL_2_6_MASK REG_GENMASK(23, 16)
> -#define GEN9_MEM_LATENCY_LEVEL_1_5_MASK REG_GENMASK(15, 8)
> -#define GEN9_MEM_LATENCY_LEVEL_0_4_MASK REG_GENMASK(7, 0)
> -#define SKL_PCODE_LOAD_HDCP_KEYS 0x5
> -#define SKL_PCODE_CDCLK_CONTROL 0x7
> -#define SKL_CDCLK_PREPARE_FOR_CHANGE 0x3
> -#define SKL_CDCLK_READY_FOR_CHANGE 0x1
> -#define GEN6_PCODE_WRITE_MIN_FREQ_TABLE 0x8
> -#define GEN6_PCODE_READ_MIN_FREQ_TABLE 0x9
> -#define GEN6_READ_OC_PARAMS 0xc
> -#define ICL_PCODE_MEM_SUBSYSYSTEM_INFO 0xd
> -#define ICL_PCODE_MEM_SS_READ_GLOBAL_INFO (0x0 << 8)
> -#define ICL_PCODE_MEM_SS_READ_QGV_POINT_INFO(point) (((point) << 16) | (0x1 << 8))
> -#define ADL_PCODE_MEM_SS_READ_PSF_GV_INFO ((0) | (0x2 << 8))
> -#define DISPLAY_TO_PCODE_CDCLK_MAX 0x28D
> -#define DISPLAY_TO_PCODE_VOLTAGE_MASK REG_GENMASK(1, 0)
> -#define DISPLAY_TO_PCODE_VOLTAGE_MAX DISPLAY_TO_PCODE_VOLTAGE_MASK
> -#define DISPLAY_TO_PCODE_CDCLK_VALID REG_BIT(27)
> -#define DISPLAY_TO_PCODE_PIPE_COUNT_VALID REG_BIT(31)
> -#define DISPLAY_TO_PCODE_CDCLK_MASK REG_GENMASK(25, 16)
> -#define DISPLAY_TO_PCODE_PIPE_COUNT_MASK REG_GENMASK(30, 28)
> -#define DISPLAY_TO_PCODE_CDCLK(x) REG_FIELD_PREP(DISPLAY_TO_PCODE_CDCLK_MASK, (x))
> -#define DISPLAY_TO_PCODE_PIPE_COUNT(x) REG_FIELD_PREP(DISPLAY_TO_PCODE_PIPE_COUNT_MASK, (x))
> -#define DISPLAY_TO_PCODE_VOLTAGE(x) REG_FIELD_PREP(DISPLAY_TO_PCODE_VOLTAGE_MASK, (x))
> -#define DISPLAY_TO_PCODE_UPDATE_MASK(cdclk, num_pipes, voltage_level) \
> - ((DISPLAY_TO_PCODE_CDCLK(cdclk)) | \
> - (DISPLAY_TO_PCODE_PIPE_COUNT(num_pipes)) | \
> - (DISPLAY_TO_PCODE_VOLTAGE(voltage_level)))
> -#define ICL_PCODE_SAGV_DE_MEM_SS_CONFIG 0xe
> -#define ICL_PCODE_REP_QGV_MASK REG_GENMASK(1, 0)
> -#define ICL_PCODE_REP_QGV_SAFE REG_FIELD_PREP(ICL_PCODE_REP_QGV_MASK, 0)
> -#define ICL_PCODE_REP_QGV_POLL REG_FIELD_PREP(ICL_PCODE_REP_QGV_MASK, 1)
> -#define ICL_PCODE_REP_QGV_REJECTED REG_FIELD_PREP(ICL_PCODE_REP_QGV_MASK, 2)
> -#define ADLS_PCODE_REP_PSF_MASK REG_GENMASK(3, 2)
> -#define ADLS_PCODE_REP_PSF_SAFE REG_FIELD_PREP(ADLS_PCODE_REP_PSF_MASK, 0)
> -#define ADLS_PCODE_REP_PSF_POLL REG_FIELD_PREP(ADLS_PCODE_REP_PSF_MASK, 1)
> -#define ADLS_PCODE_REP_PSF_REJECTED REG_FIELD_PREP(ADLS_PCODE_REP_PSF_MASK, 2)
> -#define ICL_PCODE_REQ_QGV_PT_MASK REG_GENMASK(7, 0)
> -#define ICL_PCODE_REQ_QGV_PT(x) REG_FIELD_PREP(ICL_PCODE_REQ_QGV_PT_MASK, (x))
> -#define ADLS_PCODE_REQ_PSF_PT_MASK REG_GENMASK(10, 8)
> -#define ADLS_PCODE_REQ_PSF_PT(x) REG_FIELD_PREP(ADLS_PCODE_REQ_PSF_PT_MASK, (x))
> -#define GEN6_PCODE_READ_D_COMP 0x10
> -#define GEN6_PCODE_WRITE_D_COMP 0x11
> -#define ICL_PCODE_EXIT_TCCOLD 0x12
> -#define HSW_PCODE_DE_WRITE_FREQ_REQ 0x17
> -#define DISPLAY_IPS_CONTROL 0x19
> -#define TGL_PCODE_TCCOLD 0x26
> -#define TGL_PCODE_EXIT_TCCOLD_DATA_L_EXIT_FAILED REG_BIT(0)
> -#define TGL_PCODE_EXIT_TCCOLD_DATA_L_BLOCK_REQ 0
> -#define TGL_PCODE_EXIT_TCCOLD_DATA_L_UNBLOCK_REQ REG_BIT(0)
> - /* See also IPS_CTL */
> -#define IPS_PCODE_CONTROL (1 << 30)
> -#define HSW_PCODE_DYNAMIC_DUTY_CYCLE_CONTROL 0x1A
> -#define GEN9_PCODE_SAGV_CONTROL 0x21
> -#define GEN9_SAGV_DISABLE 0x0
> -#define GEN9_SAGV_IS_DISABLED 0x1
> -#define GEN9_SAGV_ENABLE 0x3
> -#define DG1_PCODE_STATUS 0x7E
> -#define DG1_UNCORE_GET_INIT_STATUS 0x0
> -#define DG1_UNCORE_INIT_STATUS_COMPLETE 0x1
> -#define PCODE_POWER_SETUP 0x7C
> -#define POWER_SETUP_SUBCOMMAND_READ_I1 0x4
> -#define POWER_SETUP_SUBCOMMAND_WRITE_I1 0x5
> -#define POWER_SETUP_I1_WATTS REG_BIT(31)
> -#define POWER_SETUP_I1_SHIFT 6 /* 10.6 fixed point format */
> -#define POWER_SETUP_I1_DATA_MASK REG_GENMASK(15, 0)
> -#define POWER_SETUP_SUBCOMMAND_G8_ENABLE 0x6
> -#define GEN12_PCODE_READ_SAGV_BLOCK_TIME_US 0x23
> -#define XEHP_PCODE_FREQUENCY_CONFIG 0x6e /* pvc */
> -/* XEHP_PCODE_FREQUENCY_CONFIG sub-commands (param1) */
> -#define PCODE_MBOX_FC_SC_READ_FUSED_P0 0x0
> -#define PCODE_MBOX_FC_SC_READ_FUSED_PN 0x1
> -/* PCODE_MBOX_DOMAIN_* - mailbox domain IDs */
> -/* XEHP_PCODE_FREQUENCY_CONFIG param2 */
> -#define PCODE_MBOX_DOMAIN_NONE 0x0
> -#define PCODE_MBOX_DOMAIN_MEDIAFF 0x3
> #define GEN6_PCODE_DATA _MMIO(0x138128)
> #define GEN6_PCODE_FREQ_IA_RATIO_SHIFT 8
> #define GEN6_PCODE_FREQ_RING_RATIO_SHIFT 16
> diff --git a/include/drm/intel/intel_gmd_common_regs.h b/include/drm/intel/intel_gmd_common_regs.h
> new file mode 100644
> index 000000000000..8e9a574c87d9
> --- /dev/null
> +++ b/include/drm/intel/intel_gmd_common_regs.h
> @@ -0,0 +1,108 @@
> +/* SPDX-License-Identifier: MIT */
> +/* Copyright © 2026 Intel Corporation */
> +
> +#ifndef _INTEL_GMD_COMMON_REG_H_
> +#define _INTEL_GMD_COMMON_REG_H_
> +
> +#define GEN6_PCODE_MAILBOX _MMIO(0x138124)
> +#define GEN6_PCODE_READY (1 << 31)
> +#define GEN6_PCODE_MB_PARAM2 REG_GENMASK(23, 16)
> +#define GEN6_PCODE_MB_PARAM1 REG_GENMASK(15, 8)
> +#define GEN6_PCODE_MB_COMMAND REG_GENMASK(7, 0)
> +#define GEN6_PCODE_ERROR_MASK 0xFF
> +#define GEN6_PCODE_SUCCESS 0x0
> +#define GEN6_PCODE_ILLEGAL_CMD 0x1
> +#define GEN6_PCODE_MIN_FREQ_TABLE_GT_RATIO_OUT_OF_RANGE 0x2
> +#define GEN6_PCODE_TIMEOUT 0x3
> +#define GEN6_PCODE_UNIMPLEMENTED_CMD 0xFF
> +#define GEN7_PCODE_TIMEOUT 0x2
> +#define GEN7_PCODE_ILLEGAL_DATA 0x3
> +#define GEN11_PCODE_ILLEGAL_SUBCOMMAND 0x4
> +#define GEN11_PCODE_LOCKED 0x6
> +#define GEN11_PCODE_REJECTED 0x11
> +#define GEN7_PCODE_MIN_FREQ_TABLE_GT_RATIO_OUT_OF_RANGE 0x10
> +#define GEN6_PCODE_WRITE_RC6VIDS 0x4
> +#define GEN6_PCODE_READ_RC6VIDS 0x5
> +#define GEN6_ENCODE_RC6_VID(mv) (((mv) - 245) / 5)
> +#define GEN6_DECODE_RC6_VID(vids) (((vids) * 5) + 245)
> +#define BDW_PCODE_DISPLAY_FREQ_CHANGE_REQ 0x18
> +#define GEN9_PCODE_READ_MEM_LATENCY 0x6
> +#define GEN9_MEM_LATENCY_LEVEL_3_7_MASK REG_GENMASK(31, 24)
> +#define GEN9_MEM_LATENCY_LEVEL_2_6_MASK REG_GENMASK(23, 16)
> +#define GEN9_MEM_LATENCY_LEVEL_1_5_MASK REG_GENMASK(15, 8)
> +#define GEN9_MEM_LATENCY_LEVEL_0_4_MASK REG_GENMASK(7, 0)
> +#define SKL_PCODE_LOAD_HDCP_KEYS 0x5
> +#define SKL_PCODE_CDCLK_CONTROL 0x7
> +#define SKL_CDCLK_PREPARE_FOR_CHANGE 0x3
> +#define SKL_CDCLK_READY_FOR_CHANGE 0x1
> +#define GEN6_PCODE_WRITE_MIN_FREQ_TABLE 0x8
> +#define GEN6_PCODE_READ_MIN_FREQ_TABLE 0x9
> +#define GEN6_READ_OC_PARAMS 0xc
> +#define ICL_PCODE_MEM_SUBSYSYSTEM_INFO 0xd
> +#define ICL_PCODE_MEM_SS_READ_GLOBAL_INFO (0x0 << 8)
> +#define ICL_PCODE_MEM_SS_READ_QGV_POINT_INFO(point) (((point) << 16) | (0x1 << 8))
> +#define ADL_PCODE_MEM_SS_READ_PSF_GV_INFO ((0) | (0x2 << 8))
> +#define DISPLAY_TO_PCODE_CDCLK_MAX 0x28D
> +#define DISPLAY_TO_PCODE_VOLTAGE_MASK REG_GENMASK(1, 0)
> +#define DISPLAY_TO_PCODE_VOLTAGE_MAX DISPLAY_TO_PCODE_VOLTAGE_MASK
> +#define DISPLAY_TO_PCODE_CDCLK_VALID REG_BIT(27)
> +#define DISPLAY_TO_PCODE_PIPE_COUNT_VALID REG_BIT(31)
> +#define DISPLAY_TO_PCODE_CDCLK_MASK REG_GENMASK(25, 16)
> +#define DISPLAY_TO_PCODE_PIPE_COUNT_MASK REG_GENMASK(30, 28)
> +#define DISPLAY_TO_PCODE_CDCLK(x) REG_FIELD_PREP(DISPLAY_TO_PCODE_CDCLK_MASK, (x))
> +#define DISPLAY_TO_PCODE_PIPE_COUNT(x) REG_FIELD_PREP(DISPLAY_TO_PCODE_PIPE_COUNT_MASK, (x))
> +#define DISPLAY_TO_PCODE_VOLTAGE(x) REG_FIELD_PREP(DISPLAY_TO_PCODE_VOLTAGE_MASK, (x))
> +#define DISPLAY_TO_PCODE_UPDATE_MASK(cdclk, num_pipes, voltage_level) \
> + ((DISPLAY_TO_PCODE_CDCLK(cdclk)) | \
> + (DISPLAY_TO_PCODE_PIPE_COUNT(num_pipes)) | \
> + (DISPLAY_TO_PCODE_VOLTAGE(voltage_level)))
> +#define ICL_PCODE_SAGV_DE_MEM_SS_CONFIG 0xe
> +#define ICL_PCODE_REP_QGV_MASK REG_GENMASK(1, 0)
> +#define ICL_PCODE_REP_QGV_SAFE REG_FIELD_PREP(ICL_PCODE_REP_QGV_MASK, 0)
> +#define ICL_PCODE_REP_QGV_POLL REG_FIELD_PREP(ICL_PCODE_REP_QGV_MASK, 1)
> +#define ICL_PCODE_REP_QGV_REJECTED REG_FIELD_PREP(ICL_PCODE_REP_QGV_MASK, 2)
> +#define ADLS_PCODE_REP_PSF_MASK REG_GENMASK(3, 2)
> +#define ADLS_PCODE_REP_PSF_SAFE REG_FIELD_PREP(ADLS_PCODE_REP_PSF_MASK, 0)
> +#define ADLS_PCODE_REP_PSF_POLL REG_FIELD_PREP(ADLS_PCODE_REP_PSF_MASK, 1)
> +#define ADLS_PCODE_REP_PSF_REJECTED REG_FIELD_PREP(ADLS_PCODE_REP_PSF_MASK, 2)
> +#define ICL_PCODE_REQ_QGV_PT_MASK REG_GENMASK(7, 0)
> +#define ICL_PCODE_REQ_QGV_PT(x) REG_FIELD_PREP(ICL_PCODE_REQ_QGV_PT_MASK, (x))
> +#define ADLS_PCODE_REQ_PSF_PT_MASK REG_GENMASK(10, 8)
> +#define ADLS_PCODE_REQ_PSF_PT(x) REG_FIELD_PREP(ADLS_PCODE_REQ_PSF_PT_MASK, (x))
> +#define GEN6_PCODE_READ_D_COMP 0x10
> +#define GEN6_PCODE_WRITE_D_COMP 0x11
> +#define ICL_PCODE_EXIT_TCCOLD 0x12
> +#define HSW_PCODE_DE_WRITE_FREQ_REQ 0x17
> +#define DISPLAY_IPS_CONTROL 0x19
> +#define TGL_PCODE_TCCOLD 0x26
> +#define TGL_PCODE_EXIT_TCCOLD_DATA_L_EXIT_FAILED REG_BIT(0)
> +#define TGL_PCODE_EXIT_TCCOLD_DATA_L_BLOCK_REQ 0
> +#define TGL_PCODE_EXIT_TCCOLD_DATA_L_UNBLOCK_REQ REG_BIT(0)
> +/* See also IPS_CTL */
> +#define IPS_PCODE_CONTROL (1 << 30)
> +#define HSW_PCODE_DYNAMIC_DUTY_CYCLE_CONTROL 0x1A
> +#define GEN9_PCODE_SAGV_CONTROL 0x21
> +#define GEN9_SAGV_DISABLE 0x0
> +#define GEN9_SAGV_IS_DISABLED 0x1
> +#define GEN9_SAGV_ENABLE 0x3
> +#define DG1_PCODE_STATUS 0x7E
> +#define DG1_UNCORE_GET_INIT_STATUS 0x0
> +#define DG1_UNCORE_INIT_STATUS_COMPLETE 0x1
> +#define PCODE_POWER_SETUP 0x7C
> +#define POWER_SETUP_SUBCOMMAND_READ_I1 0x4
> +#define POWER_SETUP_SUBCOMMAND_WRITE_I1 0x5
> +#define POWER_SETUP_I1_WATTS REG_BIT(31)
> +#define POWER_SETUP_I1_SHIFT 6 /* 10.6 fixed point format */
> +#define POWER_SETUP_I1_DATA_MASK REG_GENMASK(15, 0)
> +#define POWER_SETUP_SUBCOMMAND_G8_ENABLE 0x6
> +#define GEN12_PCODE_READ_SAGV_BLOCK_TIME_US 0x23
> +#define XEHP_PCODE_FREQUENCY_CONFIG 0x6e /* pvc */
> +/* XEHP_PCODE_FREQUENCY_CONFIG sub-commands (param1) */
> +#define PCODE_MBOX_FC_SC_READ_FUSED_P0 0x0
> +#define PCODE_MBOX_FC_SC_READ_FUSED_PN 0x1
> +/* PCODE_MBOX_DOMAIN_* - mailbox domain IDs */
> +/* XEHP_PCODE_FREQUENCY_CONFIG param2 */
> +#define PCODE_MBOX_DOMAIN_NONE 0x0
> +#define PCODE_MBOX_DOMAIN_MEDIAFF 0x3
> +
> +#endif
--
Jani Nikula, Intel
next prev parent reply other threads:[~2026-01-22 11:40 UTC|newest]
Thread overview: 58+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-01-21 23:23 [v2 00/19] Make Display free from i915_reg.h Uma Shankar
2026-01-21 23:23 ` [v2 01/19] drm/{i915, xe}: Extract display registers from i915_reg.h to display Uma Shankar
2026-01-22 11:16 ` Jani Nikula
2026-01-22 11:16 ` Jani Nikula
2026-01-23 10:38 ` Shankar, Uma
2026-01-21 23:23 ` [v2 02/19] drm/{i915, xe}: Extract South chicken " Uma Shankar
2026-01-22 11:26 ` Jani Nikula
2026-01-23 10:40 ` Shankar, Uma
2026-01-21 23:23 ` [v2 03/19] drm/{i915, xe}: Extract display interrupt definitions Uma Shankar
2026-01-22 11:29 ` Jani Nikula
2026-01-23 10:42 ` Shankar, Uma
2026-01-21 23:23 ` [v2 04/19] drm/{i915, xe}: Extract DSPCLK_GATE_D from i915_reg to display Uma Shankar
2026-01-22 11:31 ` Jani Nikula
2026-01-21 23:24 ` [v2 05/19] drm/{i915, xe}: Extract pcode definitions to common header Uma Shankar
2026-01-22 11:40 ` Jani Nikula [this message]
2026-01-23 10:45 ` Shankar, Uma
2026-01-22 11:46 ` Jani Nikula
2026-01-23 10:46 ` Shankar, Uma
2026-01-21 23:24 ` [v2 06/19] drm/{i915, xe}: Remove i915_reg.h from intel_display_device.c Uma Shankar
2026-01-22 11:36 ` Jani Nikula
2026-01-23 10:43 ` Shankar, Uma
2026-01-21 23:24 ` [v2 07/19] drm/{i915, xe}: Remove i915_reg.h from intel_dram.c Uma Shankar
2026-01-22 11:41 ` Jani Nikula
2026-01-23 10:45 ` Shankar, Uma
2026-01-21 23:24 ` [v2 08/19] drm/{i915, xe}: Removed i915_reg.h from intel_display.c Uma Shankar
2026-01-22 11:43 ` Jani Nikula
2026-01-21 23:24 ` [v2 09/19] drm/{i915, xe}: Remove i915_reg.h from intel_overlay.c Uma Shankar
2026-01-22 11:51 ` Jani Nikula
2026-01-23 10:47 ` Shankar, Uma
2026-01-21 23:24 ` [v2 10/19] drm/{i915, xe}: Remove i915_reg.h from g4x_dp.c Uma Shankar
2026-01-22 12:00 ` Jani Nikula
2026-01-23 10:48 ` Shankar, Uma
2026-01-21 23:24 ` [v2 11/19] drm/{i915, xe}: Remove i915_reg.h from i9xx_wm.c Uma Shankar
2026-01-21 23:24 ` [v2 12/19] drm/{i915, xe}: Remove i915_reg.h from g4x_hdmi.c Uma Shankar
2026-01-22 12:08 ` Jani Nikula
2026-01-21 23:24 ` [v2 13/19] drm/{i915, xe}: Remove i915_reg.h from intel_rom.c Uma Shankar
2026-01-22 12:09 ` Jani Nikula
2026-01-21 23:24 ` [v2 14/19] drm/{i915, xe}: Remove i915_reg.h from intel_psr.c Uma Shankar
2026-01-22 12:10 ` Jani Nikula
2026-01-21 23:24 ` [v2 15/19] drm/{i915, xe}: Remove i915_reg.h from intel_fifo_underrun.c Uma Shankar
2026-01-22 12:14 ` Jani Nikula
2026-01-23 10:49 ` Shankar, Uma
2026-01-21 23:24 ` [v2 16/19] drm/{i915, xe}: Remove i915_reg.h from intel_display_irq.c Uma Shankar
2026-01-22 12:18 ` Jani Nikula
2026-01-23 10:49 ` Shankar, Uma
2026-01-21 23:24 ` [v2 17/19] drm/{i915, xe}: Remove i915_reg.h from intel_display_power_well.c Uma Shankar
2026-01-22 12:19 ` Jani Nikula
2026-01-23 10:50 ` Shankar, Uma
2026-01-21 23:24 ` [v2 18/19] drm/{i915, xe}: Remove i915_reg.h from intel_modeset_setup.c Uma Shankar
2026-01-22 12:21 ` Jani Nikula
2026-01-21 23:24 ` [v2 19/19] drm/{i915, xe}: Remove i915_reg.h from display Uma Shankar
2026-01-22 12:20 ` Jani Nikula
2026-01-23 10:53 ` Shankar, Uma
2026-01-21 23:56 ` ✗ CI.checkpatch: warning for Make Display free from i915_reg.h (rev2) Patchwork
2026-01-21 23:58 ` ✓ CI.KUnit: success " Patchwork
2026-01-22 0:13 ` ✗ CI.checksparse: warning " Patchwork
2026-01-22 0:39 ` ✓ Xe.CI.BAT: success " Patchwork
2026-01-22 10:10 ` ✓ Xe.CI.Full: " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=fe5fb0c8b1c4a4c9df24ef31e278dbfb1f1c3872@intel.com \
--to=jani.nikula@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=intel-xe@lists.freedesktop.org \
--cc=uma.shankar@intel.com \
--cc=ville.syrjala@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox