From: James Prestwood <prestwoj@gmail.com>
To: iwd@lists.linux.dev
Cc: James Prestwood <prestwoj@gmail.com>
Subject: [PATCH v3 12/13] ft: remove ft_associate and helpers
Date: Wed, 6 Dec 2023 12:18:01 -0800 [thread overview]
Message-ID: <20231206201802.2139649-12-prestwoj@gmail.com> (raw)
In-Reply-To: <20231206201802.2139649-1-prestwoj@gmail.com>
The reassociation is done through netdev directly, these are no
longer needed.
---
src/ft.c | 160 +------------------------------------------------------
src/ft.h | 2 -
2 files changed, 1 insertion(+), 161 deletions(-)
diff --git a/src/ft.c b/src/ft.c
index c612a433..d8bee74c 100644
--- a/src/ft.c
+++ b/src/ft.c
@@ -43,7 +43,6 @@
static const unsigned int FT_ONCHANNEL_TIME = 300u; /* ms */
static ft_tx_frame_func_t tx_frame = NULL;
-static ft_tx_associate_func_t tx_assoc = NULL;
static struct l_queue *info_list = NULL;
struct ft_info {
@@ -224,117 +223,6 @@ static bool ft_parse_associate_resp_frame(const uint8_t *frame, size_t frame_len
return true;
}
-static int ft_tx_reassociate(uint32_t ifindex, uint32_t freq,
- const uint8_t *prev_bssid)
-{
- struct netdev *netdev = netdev_find(ifindex);
- struct handshake_state *hs = netdev_get_handshake(netdev);
- struct iovec iov[3];
- int iov_elems = 0;
- uint32_t kck_len = handshake_state_get_kck_len(hs);
- bool is_rsn = hs->supplicant_ie != NULL;
- uint8_t *rsne = NULL;
-
- if (is_rsn) {
- struct ie_rsn_info rsn_info;
-
- /*
- * Rebuild the RSNE to include the PMKR1Name and append
- * MDE + FTE.
- *
- * 12.8.4: "If present, the RSNE shall be set as follows:
- * - Version field shall be set to 1.
- * - PMKID Count field shall be set to 1.
- * - PMKID field shall contain the PMKR1Name.
- * - All other fields shall be as specified in 8.4.2.27
- * and 11.5.3."
- */
- if (ie_parse_rsne_from_data(hs->supplicant_ie,
- hs->supplicant_ie[1] + 2,
- &rsn_info) < 0)
- goto error;
-
- rsn_info.num_pmkids = 1;
- rsn_info.pmkids = hs->pmk_r1_name;
-
- /* Always set OCVC false for FT for now */
- rsn_info.ocvc = false;
-
- rsne = alloca(256);
- ie_build_rsne(&rsn_info, rsne);
-
- iov[iov_elems].iov_base = rsne;
- iov[iov_elems].iov_len = rsne[1] + 2;
- iov_elems += 1;
- }
-
- /* The MDE advertised by the BSS must be passed verbatim */
- iov[iov_elems].iov_base = (void *) hs->mde;
- iov[iov_elems].iov_len = hs->mde[1] + 2;
- iov_elems += 1;
-
- if (is_rsn) {
- struct ie_ft_info ft_info;
- uint8_t *fte;
-
- /*
- * 12.8.4: "If present, the FTE shall be set as follows:
- * - ANonce, SNonce, R0KH-ID, and R1KH-ID shall be set to
- * the values contained in the second message of this
- * sequence.
- * - The Element Count field of the MIC Control field shall
- * be set to the number of elements protected in this
- * frame (variable).
- * [...]
- * - All other fields shall be set to 0."
- */
-
- memset(&ft_info, 0, sizeof(ft_info));
-
- ft_info.mic_element_count = 3;
- memcpy(ft_info.r0khid, hs->r0khid, hs->r0khid_len);
- ft_info.r0khid_len = hs->r0khid_len;
- memcpy(ft_info.r1khid, hs->r1khid, 6);
- ft_info.r1khid_present = true;
- memcpy(ft_info.anonce, hs->anonce, 32);
- memcpy(ft_info.snonce, hs->snonce, 32);
-
- /*
- * IEEE 802.11-2020 Section 13.7.1 FT reassociation in an RSN
- *
- * "If dot11RSNAOperatingChannelValidationActivated is true and
- * the FTO indicates OCVC capability, the target AP shall
- * ensure that OCI subelement of the FTE matches by ensuring
- * that all of the following are true:
- * - OCI subelement is present
- * - Channel information in the OCI matches current
- * operating channel parameters (see 12.2.9)"
- */
- if (hs->supplicant_ocvc && hs->chandef) {
- oci_from_chandef(hs->chandef, ft_info.oci);
- ft_info.oci_present = true;
- }
-
- fte = alloca(256);
- ie_build_fast_bss_transition(&ft_info, kck_len, fte);
-
- if (!ft_calculate_fte_mic(hs, 5, rsne, fte, NULL, ft_info.mic))
- goto error;
-
- /* Rebuild the FT IE now with the MIC included */
- ie_build_fast_bss_transition(&ft_info, kck_len, fte);
-
- iov[iov_elems].iov_base = fte;
- iov[iov_elems].iov_len = fte[1] + 2;
- iov_elems += 1;
- }
-
- return tx_assoc(ifindex, freq, prev_bssid, iov, iov_elems);
-
-error:
- return -EINVAL;
-}
-
static bool ft_verify_rsne(const uint8_t *rsne, const uint8_t *pmk_r0_name,
const uint8_t *authenticator_ie)
{
@@ -762,11 +650,6 @@ void __ft_set_tx_frame_func(ft_tx_frame_func_t func)
tx_frame = func;
}
-void __ft_set_tx_associate_func(ft_tx_associate_func_t func)
-{
- tx_assoc = func;
-}
-
static bool ft_parse_ies(struct ft_info *info, struct handshake_state *hs,
const uint8_t *ies, size_t ies_len)
{
@@ -1173,7 +1056,7 @@ static void ft_authenticate_destroy(int error, void *user_data)
/*
* There is no callback here because its assumed that another work item will
* be inserted following this call which will check if authentication succeeded
- * via ft_associate.
+ * via ft_handshake_setup.
*
* If the netdev goes away while authentication is in-flight station will clear
* the authentications during cleanup, and in turn cancel the offchannel
@@ -1235,47 +1118,6 @@ int ft_authenticate_onchannel(uint32_t ifindex, const struct scan_bss *target)
return 0;
}
-int ft_associate(uint32_t ifindex, const uint8_t *addr)
-{
- struct netdev *netdev = netdev_find(ifindex);
- struct handshake_state *hs = netdev_get_handshake(netdev);
- struct ft_info *info;
- int ret;
-
- /*
- * TODO: Since FT-over-DS is done early, before the time of roaming, it
- * may end up that a completely new BSS is the best candidate and
- * we haven't yet authenticated. We could actually authenticate
- * at this point, but for now just assume the caller will choose
- * a different BSS.
- */
- info = ft_info_find(ifindex, addr);
- if (!info)
- return -ENOENT;
-
- /*
- * Either failed or no response. This may have been an FT-over-DS
- * attempt so clear out the entry so FT-over-Air can try again.
- */
- if (info->status != 0) {
- int status = info->status;
-
- l_queue_remove(info_list, info);
- ft_info_destroy(info);
-
- return status;
- }
-
- ft_prepare_handshake(info, hs);
-
- ret = ft_tx_reassociate(ifindex, info->frequency, info->prev_bssid);
-
- /* After this no previous auths will be valid */
- ft_clear_authentications(ifindex);
-
- return ret;
-}
-
int ft_handshake_setup(uint32_t ifindex, const uint8_t *target)
{
struct netdev *netdev = netdev_find(ifindex);
diff --git a/src/ft.h b/src/ft.h
index 23d0136e..92c207fb 100644
--- a/src/ft.h
+++ b/src/ft.h
@@ -32,7 +32,6 @@ typedef int (*ft_tx_associate_func_t)(uint32_t ifindex, uint32_t freq,
struct iovec *ie_iov, size_t iov_len);
void __ft_set_tx_frame_func(ft_tx_frame_func_t func);
-void __ft_set_tx_associate_func(ft_tx_associate_func_t func);
int __ft_rx_associate(uint32_t ifindex, const uint8_t *frame,
size_t frame_len);
void __ft_rx_action(uint32_t ifindex, const uint8_t *frame, size_t frame_len);
@@ -43,6 +42,5 @@ int ft_handshake_setup(uint32_t ifindex, const uint8_t *target);
void ft_clear_authentications(uint32_t ifindex);
int ft_action(uint32_t ifindex, uint32_t freq, const struct scan_bss *target);
-int ft_associate(uint32_t ifindex, const uint8_t *addr);
int ft_authenticate(uint32_t ifindex, const struct scan_bss *target);
int ft_authenticate_onchannel(uint32_t ifindex, const struct scan_bss *target);
--
2.34.1
next prev parent reply other threads:[~2023-12-06 20:18 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-12-06 20:17 [PATCH v3 01/13] auto-t: add explicit stop() to IWD class James Prestwood
2023-12-06 20:17 ` [PATCH v3 02/13] auto-t: add association timeout test James Prestwood
2023-12-06 20:17 ` [PATCH v3 03/13] auto-t: only call set_value for changed values in default() James Prestwood
2023-12-06 20:17 ` [PATCH v3 04/13] handshake: add setters for authenticator/supplicant_fte James Prestwood
2023-12-06 20:17 ` [PATCH v3 05/13] handshake: use authenticator_fte instead of 'fte' James Prestwood
2023-12-06 20:17 ` [PATCH v3 06/13] unit: use authenticator_fte James Prestwood
2023-12-06 20:17 ` [PATCH v3 07/13] handshake: remove handshake_state_set_fte James Prestwood
2023-12-06 20:17 ` [PATCH v3 08/13] ft: add FTE/RSNE building to ft_prepare_handshake James Prestwood
2023-12-06 20:17 ` [PATCH v3 09/13] ft: add ft_handshake_setup James Prestwood
2023-12-06 20:17 ` [PATCH v3 10/13] netdev: add netdev_ft_reassociate James Prestwood
2023-12-06 20:18 ` [PATCH v3 11/13] station: use netdev_ft_reassociate James Prestwood
2023-12-06 20:18 ` James Prestwood [this message]
2023-12-06 20:18 ` [PATCH v3 13/13] netdev: station: remove NETDEV_EVENT_FT_ROAMED James Prestwood
2023-12-13 16:14 ` [PATCH v3 01/13] auto-t: add explicit stop() to IWD class Denis Kenzior
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231206201802.2139649-12-prestwoj@gmail.com \
--to=prestwoj@gmail.com \
--cc=iwd@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox