From: Magnus Kulke <magnuskulke@linux.microsoft.com>
To: qemu-devel@nongnu.org
Cc: kvm@vger.kernel.org, "Magnus Kulke" <magnuskulke@microsoft.com>,
"Wei Liu" <liuwe@microsoft.com>,
"Michael S. Tsirkin" <mst@redhat.com>,
"Cédric Le Goater" <clg@redhat.com>,
"Zhao Liu" <zhao1.liu@intel.com>,
"Richard Henderson" <richard.henderson@linaro.org>,
"Paolo Bonzini" <pbonzini@redhat.com>,
"Wei Liu" <wei.liu@kernel.org>,
"Magnus Kulke" <magnuskulke@linux.microsoft.com>,
"Alex Williamson" <alex@shazbot.org>,
"Marcel Apfelbaum" <marcel.apfelbaum@gmail.com>,
"Philippe Mathieu-Daudé" <philmd@linaro.org>,
"Marcelo Tosatti" <mtosatti@redhat.com>
Subject: [PATCH 05/34] accel/accel-irq: add generic begin_route_changes
Date: Fri, 17 Apr 2026 12:55:49 +0200 [thread overview]
Message-ID: <20260417105618.3621-6-magnuskulke@linux.microsoft.com> (raw)
In-Reply-To: <20260417105618.3621-1-magnuskulke@linux.microsoft.com>
A generic accel_irqchip_begin_route_change() fn has been introduced for
usage in the MSHV accelerator. It replaces the respective kvm_ fn.
Signed-off-by: Magnus Kulke <magnuskulke@linux.microsoft.com>
---
accel/accel-irq.c | 21 +++++++++++++++++++++
hw/misc/ivshmem-pci.c | 4 ++--
hw/vfio/pci.c | 5 +++--
hw/virtio/virtio-pci.c | 2 +-
include/system/accel-irq.h | 1 +
include/system/kvm.h | 8 --------
target/i386/kvm/kvm.c | 3 ++-
7 files changed, 30 insertions(+), 14 deletions(-)
diff --git a/accel/accel-irq.c b/accel/accel-irq.c
index 0aa04c033d..3815f6727c 100644
--- a/accel/accel-irq.c
+++ b/accel/accel-irq.c
@@ -10,6 +10,7 @@
*/
#include "qemu/osdep.h"
+#include "qemu/error-report.h"
#include "hw/pci/msi.h"
#include "system/kvm.h"
@@ -104,3 +105,23 @@ int accel_irqchip_remove_irqfd_notifier_gsi(EventNotifier *n, int virq)
}
return -ENOSYS;
}
+
+inline AccelRouteChange accel_irqchip_begin_route_changes(void)
+{
+#ifdef CONFIG_MSHV_IS_POSSIBLE
+ if (mshv_msi_via_irqfd_enabled()) {
+ return (AccelRouteChange) {
+ .accel = ACCEL(mshv_state),
+ .changes = 0,
+ };
+ }
+#endif
+ if (kvm_enabled()) {
+ return (AccelRouteChange) {
+ .accel = ACCEL(kvm_state),
+ .changes = 0,
+ };
+ }
+ error_report("can't initiate route change, no accel irqchip available");
+ abort();
+}
diff --git a/hw/misc/ivshmem-pci.c b/hw/misc/ivshmem-pci.c
index aa8f271755..fa23562886 100644
--- a/hw/misc/ivshmem-pci.c
+++ b/hw/misc/ivshmem-pci.c
@@ -26,7 +26,7 @@
#include "hw/core/qdev-properties-system.h"
#include "hw/pci/msi.h"
#include "hw/pci/msix.h"
-#include "system/kvm.h"
+#include "system/accel-irq.h"
#include "migration/blocker.h"
#include "migration/vmstate.h"
#include "qemu/error-report.h"
@@ -430,7 +430,7 @@ static void ivshmem_add_kvm_msi_virq(IVShmemState *s, int vector,
IVSHMEM_DPRINTF("ivshmem_add_kvm_msi_virq vector:%d\n", vector);
assert(!s->msi_vectors[vector].pdev);
- c = kvm_irqchip_begin_route_changes(kvm_state);
+ c = accel_irqchip_begin_route_changes();
ret = kvm_irqchip_add_msi_route(&c, vector, pdev);
if (ret < 0) {
error_setg(errp, "kvm_irqchip_add_msi_route failed");
diff --git a/hw/vfio/pci.c b/hw/vfio/pci.c
index 79c503c8ae..35b4545482 100644
--- a/hw/vfio/pci.c
+++ b/hw/vfio/pci.c
@@ -39,6 +39,7 @@
#include "qemu/module.h"
#include "qemu/range.h"
#include "qemu/units.h"
+#include "system/accel-irq.h"
#include "system/kvm.h"
#include "system/runstate.h"
#include "pci.h"
@@ -692,7 +693,7 @@ static int vfio_msix_vector_do_use(PCIDevice *pdev, unsigned int nr,
if (vdev->defer_kvm_irq_routing) {
vfio_pci_add_kvm_msi_virq(vdev, vector, nr, true);
} else {
- vfio_route_change = kvm_irqchip_begin_route_changes(kvm_state);
+ vfio_route_change = accel_irqchip_begin_route_changes();
vfio_pci_add_kvm_msi_virq(vdev, vector, nr, true);
kvm_irqchip_commit_route_changes(&vfio_route_change);
vfio_connect_kvm_msi_virq(vector, nr);
@@ -793,7 +794,7 @@ void vfio_pci_prepare_kvm_msi_virq_batch(VFIOPCIDevice *vdev)
{
assert(!vdev->defer_kvm_irq_routing);
vdev->defer_kvm_irq_routing = true;
- vfio_route_change = kvm_irqchip_begin_route_changes(kvm_state);
+ vfio_route_change = accel_irqchip_begin_route_changes();
}
void vfio_pci_commit_kvm_msi_virq_batch(VFIOPCIDevice *vdev)
diff --git a/hw/virtio/virtio-pci.c b/hw/virtio/virtio-pci.c
index 5010572784..faa4a41cca 100644
--- a/hw/virtio/virtio-pci.c
+++ b/hw/virtio/virtio-pci.c
@@ -869,7 +869,7 @@ static int kvm_virtio_pci_vq_vector_use(VirtIOPCIProxy *proxy,
int ret;
if (irqfd->users == 0) {
- AccelRouteChange c = kvm_irqchip_begin_route_changes(kvm_state);
+ AccelRouteChange c = accel_irqchip_begin_route_changes();
ret = accel_irqchip_add_msi_route(&c, vector, &proxy->pci_dev);
if (ret < 0) {
return ret;
diff --git a/include/system/accel-irq.h b/include/system/accel-irq.h
index a148920711..fc94c54264 100644
--- a/include/system/accel-irq.h
+++ b/include/system/accel-irq.h
@@ -25,6 +25,7 @@ static inline bool accel_irqchip_is_split(void)
return mshv_msi_via_irqfd_enabled() || kvm_irqchip_is_split();
}
+AccelRouteChange accel_irqchip_begin_route_changes(void);
int accel_irqchip_add_msi_route(AccelRouteChange *c, int vector,
PCIDevice *dev);
int accel_irqchip_update_msi_route(int vector, MSIMessage msg, PCIDevice *dev);
diff --git a/include/system/kvm.h b/include/system/kvm.h
index ccf90b8341..fec24d2135 100644
--- a/include/system/kvm.h
+++ b/include/system/kvm.h
@@ -476,14 +476,6 @@ int kvm_irqchip_update_msi_route(KVMState *s, int virq, MSIMessage msg,
PCIDevice *dev);
void kvm_irqchip_commit_routes(KVMState *s);
-static inline AccelRouteChange kvm_irqchip_begin_route_changes(KVMState *s)
-{
- return (AccelRouteChange) {
- .accel = ACCEL(s),
- .changes = 0,
- };
-}
-
static inline void kvm_irqchip_commit_route_changes(AccelRouteChange *c)
{
if (c->changes) {
diff --git a/target/i386/kvm/kvm.c b/target/i386/kvm/kvm.c
index 478a5573cd..03312922d5 100644
--- a/target/i386/kvm/kvm.c
+++ b/target/i386/kvm/kvm.c
@@ -32,6 +32,7 @@
#include "vmsr_energy.h"
#include "system/system.h"
#include "system/hw_accel.h"
+#include "system/accel-irq.h"
#include "system/kvm_int.h"
#include "system/runstate.h"
#include "system/ramblock.h"
@@ -6678,7 +6679,7 @@ void kvm_arch_init_irq_routing(KVMState *s)
kvm_gsi_routing_allowed = true;
if (kvm_irqchip_is_split()) {
- AccelRouteChange c = kvm_irqchip_begin_route_changes(s);
+ AccelRouteChange c = accel_irqchip_begin_route_changes();
int i;
/* If the ioapic is in QEMU and the lapics are in KVM, reserve
--
2.34.1
next prev parent reply other threads:[~2026-04-17 10:56 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-04-17 10:55 [PATCH 00/34] Add migration support to the MSHV accelerator Magnus Kulke
2026-04-17 10:55 ` [PATCH 01/34] target/i386/mshv: use arch_load/store_reg fns Magnus Kulke
2026-04-17 10:55 ` [PATCH 02/34] target/i386/mshv: use generic FPU/xcr0 state Magnus Kulke
2026-04-17 10:55 ` [PATCH 03/34] target/i386/mshv: impl init/load/store_vcpu_state Magnus Kulke
2026-04-17 10:55 ` [PATCH 04/34] accel/accel-irq: add AccelRouteChange abstraction Magnus Kulke
2026-04-17 10:55 ` Magnus Kulke [this message]
2026-04-17 10:55 ` [PATCH 06/34] accel/accel-irq: add generic commit_route_changes Magnus Kulke
2026-04-17 10:55 ` [PATCH 07/34] accel/mshv: add irq_routes to state Magnus Kulke
2026-04-17 10:55 ` [PATCH 08/34] accel/mshv: update s->irq_routes in add_msi_route Magnus Kulke
2026-04-17 10:55 ` [PATCH 09/34] accel/mshv: update s->irq_routes in update_msi_route Magnus Kulke
2026-04-17 10:55 ` [PATCH 10/34] accel/mshv: update s->irq_routes in release_virq Magnus Kulke
2026-04-17 10:55 ` [PATCH 11/34] accel/mshv: use s->irq_routes in commit_routes Magnus Kulke
2026-04-17 10:55 ` [PATCH 12/34] accel/mshv: reserve ioapic routes on s->irq_routes Magnus Kulke
2026-04-17 10:55 ` [PATCH 13/34] accel/mshv: remove redundant msi controller Magnus Kulke
2026-04-17 10:55 ` [PATCH 14/34] target/i386/mshv: move apic logic into own file Magnus Kulke
2026-04-17 10:55 ` [PATCH 15/34] target/i386/mshv: remove redundant apic helpers Magnus Kulke
2026-04-17 10:56 ` [PATCH 16/34] target/i386/mshv: migrate LAPIC state Magnus Kulke
2026-04-17 11:54 ` Mohamed Mediouni
2026-04-20 11:37 ` Magnus Kulke
2026-04-17 10:56 ` [PATCH 17/34] target/i386/mshv: move msr code to arch Magnus Kulke
2026-04-17 10:56 ` [PATCH 18/34] accel/mshv: store partition proc features Magnus Kulke
2026-04-17 10:56 ` [PATCH 19/34] target/i386/mshv: expose msvh_get_generic_regs Magnus Kulke
2026-04-17 10:56 ` [PATCH 20/34] target/i386/mshv: migrate MSRs Magnus Kulke
2026-04-17 10:56 ` [PATCH 21/34] target/i386/mshv: migrate MTRR MSRs Magnus Kulke
2026-04-17 10:56 ` [PATCH 22/34] target/i386/mshv: migrate Synic SINT MSRs Magnus Kulke
2026-04-17 10:56 ` [PATCH 23/34] target/i386/mshv: migrate CET/SS MSRs Magnus Kulke
2026-04-17 10:56 ` [PATCH 24/34] target/i386/mshv: migrate SIMP and SIEFP state Magnus Kulke
2026-04-17 10:56 ` [PATCH 25/34] target/i386/mshv: migrate STIMER state Magnus Kulke
2026-04-17 10:56 ` [PATCH 26/34] accel/mshv: introduce SaveVMHandler Magnus Kulke
2026-04-17 10:56 ` [PATCH 27/34] accel/mshv: write synthetic MSRs after migration Magnus Kulke
2026-04-17 10:56 ` [PATCH 28/34] accel/mshv: migrate REFERENCE_TIME Magnus Kulke
2026-04-17 10:56 ` [PATCH 29/34] target/i386/mshv: migrate pending ints/excs Magnus Kulke
2026-04-17 10:56 ` [PATCH 30/34] target/i386: add de/compaction to xsave_helper Magnus Kulke
2026-04-17 11:56 ` Mohamed Mediouni
2026-04-18 17:46 ` Mohamed Mediouni
2026-04-20 12:02 ` Magnus Kulke
2026-04-17 10:56 ` [PATCH 31/34] target/i386/mshv: migrate XSAVE state Magnus Kulke
2026-04-17 10:56 ` [PATCH 32/34] target/i386/mshv: reconstruct hflags after load Magnus Kulke
2026-04-17 10:56 ` [PATCH 33/34] target/i386/mshv: migrate MP_STATE Magnus Kulke
2026-04-17 10:56 ` [PATCH 34/34] accel/mshv: enable dirty page tracking Magnus Kulke
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260417105618.3621-6-magnuskulke@linux.microsoft.com \
--to=magnuskulke@linux.microsoft.com \
--cc=alex@shazbot.org \
--cc=clg@redhat.com \
--cc=kvm@vger.kernel.org \
--cc=liuwe@microsoft.com \
--cc=magnuskulke@microsoft.com \
--cc=marcel.apfelbaum@gmail.com \
--cc=mst@redhat.com \
--cc=mtosatti@redhat.com \
--cc=pbonzini@redhat.com \
--cc=philmd@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=richard.henderson@linaro.org \
--cc=wei.liu@kernel.org \
--cc=zhao1.liu@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox