From: Andrew Jones <drjones@redhat.com>
To: pbonzini@redhat.com
Cc: kvmarm@lists.cs.columbia.edu, kvm@vger.kernel.org
Subject: [PULL kvm-unit-tests 23/39] arm: pmu: Test chained counters
Date: Sat, 4 Apr 2020 16:37:15 +0200 [thread overview]
Message-ID: <20200404143731.208138-24-drjones@redhat.com> (raw)
In-Reply-To: <20200404143731.208138-1-drjones@redhat.com>
From: Eric Auger <eric.auger@redhat.com>
Add 2 tests exercising chained counters. The first one uses
CPU_CYCLES and the second one uses SW_INCR.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Andrew Jones <drjones@redhat.com>
---
arm/pmu.c | 98 ++++++++++++++++++++++++++++++++++++++++++++++-
arm/unittests.cfg | 12 ++++++
2 files changed, 109 insertions(+), 1 deletion(-)
diff --git a/arm/pmu.c b/arm/pmu.c
index 16d723463395..73e55498284d 100644
--- a/arm/pmu.c
+++ b/arm/pmu.c
@@ -47,6 +47,7 @@
#define INST_PREC 0x1B
#define STALL_FRONTEND 0x23
#define STALL_BACKEND 0x24
+#define CHAIN 0x1E
#define COMMON_EVENTS_LOW 0x0
#define COMMON_EVENTS_HIGH 0x3F
@@ -141,6 +142,8 @@ static void test_event_counter_config(void) {}
static void test_basic_event_count(void) {}
static void test_mem_access(void) {}
static void test_sw_incr(void) {}
+static void test_chained_counters(void) {}
+static void test_chained_sw_incr(void) {}
#elif defined(__aarch64__)
#define ID_AA64DFR0_PERFMON_SHIFT 8
@@ -503,7 +506,92 @@ static void test_sw_incr(void)
report_info("counter values after 100 SW_INCR #0=%ld #1=%ld",
read_regn_el0(pmevcntr, 0), read_regn_el0(pmevcntr, 1));
report(read_sysreg(pmovsclr_el0) == 0x1,
- "overflow reg after 100 SW_INCR");
+ "overflow on counter #0 after 100 SW_INCR");
+}
+
+static void test_chained_counters(void)
+{
+ uint32_t events[] = {CPU_CYCLES, CHAIN};
+
+ if (!satisfy_prerequisites(events, ARRAY_SIZE(events)))
+ return;
+
+ pmu_reset();
+
+ write_regn_el0(pmevtyper, 0, CPU_CYCLES | PMEVTYPER_EXCLUDE_EL0);
+ write_regn_el0(pmevtyper, 1, CHAIN | PMEVTYPER_EXCLUDE_EL0);
+ /* enable counters #0 and #1 */
+ write_sysreg_s(0x3, PMCNTENSET_EL0);
+ write_regn_el0(pmevcntr, 0, PRE_OVERFLOW);
+
+ precise_instrs_loop(22, pmu.pmcr_ro | PMU_PMCR_E);
+
+ report(read_regn_el0(pmevcntr, 1) == 1, "CHAIN counter #1 incremented");
+ report(!read_sysreg(pmovsclr_el0), "no overflow recorded for chained incr #1");
+
+ /* test 64b overflow */
+
+ pmu_reset();
+ write_sysreg_s(0x3, PMCNTENSET_EL0);
+
+ write_regn_el0(pmevcntr, 0, PRE_OVERFLOW);
+ write_regn_el0(pmevcntr, 1, 0x1);
+ precise_instrs_loop(22, pmu.pmcr_ro | PMU_PMCR_E);
+ report_info("overflow reg = 0x%lx", read_sysreg(pmovsclr_el0));
+ report(read_regn_el0(pmevcntr, 1) == 2, "CHAIN counter #1 set to 2");
+ report(!read_sysreg(pmovsclr_el0), "no overflow recorded for chained incr #2");
+
+ write_regn_el0(pmevcntr, 0, PRE_OVERFLOW);
+ write_regn_el0(pmevcntr, 1, ALL_SET);
+
+ precise_instrs_loop(22, pmu.pmcr_ro | PMU_PMCR_E);
+ report_info("overflow reg = 0x%lx", read_sysreg(pmovsclr_el0));
+ report(!read_regn_el0(pmevcntr, 1), "CHAIN counter #1 wrapped");
+ report(read_sysreg(pmovsclr_el0) == 0x2, "overflow on chain counter");
+}
+
+static void test_chained_sw_incr(void)
+{
+ uint32_t events[] = {SW_INCR, CHAIN};
+ int i;
+
+ if (!satisfy_prerequisites(events, ARRAY_SIZE(events)))
+ return;
+
+ pmu_reset();
+
+ write_regn_el0(pmevtyper, 0, SW_INCR | PMEVTYPER_EXCLUDE_EL0);
+ write_regn_el0(pmevtyper, 1, CHAIN | PMEVTYPER_EXCLUDE_EL0);
+ /* enable counters #0 and #1 */
+ write_sysreg_s(0x3, PMCNTENSET_EL0);
+
+ write_regn_el0(pmevcntr, 0, PRE_OVERFLOW);
+ set_pmcr(pmu.pmcr_ro | PMU_PMCR_E);
+ for (i = 0; i < 100; i++)
+ write_sysreg(0x1, pmswinc_el0);
+
+ report(!read_sysreg(pmovsclr_el0) && (read_regn_el0(pmevcntr, 1) == 1),
+ "no overflow and chain counter incremented after 100 SW_INCR/CHAIN");
+ report_info("overflow=0x%lx, #0=%ld #1=%ld", read_sysreg(pmovsclr_el0),
+ read_regn_el0(pmevcntr, 0), read_regn_el0(pmevcntr, 1));
+
+ /* 64b SW_INCR and overflow on CHAIN counter*/
+ pmu_reset();
+
+ write_regn_el0(pmevtyper, 1, events[1] | PMEVTYPER_EXCLUDE_EL0);
+ write_regn_el0(pmevcntr, 0, PRE_OVERFLOW);
+ write_regn_el0(pmevcntr, 1, ALL_SET);
+ write_sysreg_s(0x3, PMCNTENSET_EL0);
+ set_pmcr(pmu.pmcr_ro | PMU_PMCR_E);
+ for (i = 0; i < 100; i++)
+ write_sysreg(0x1, pmswinc_el0);
+
+ report((read_sysreg(pmovsclr_el0) == 0x2) &&
+ (read_regn_el0(pmevcntr, 1) == 0) &&
+ (read_regn_el0(pmevcntr, 0) == 84),
+ "overflow on chain counter and expected values after 100 SW_INCR/CHAIN");
+ report_info("overflow=0x%lx, #0=%ld #1=%ld", read_sysreg(pmovsclr_el0),
+ read_regn_el0(pmevcntr, 0), read_regn_el0(pmevcntr, 1));
}
#endif
@@ -696,6 +784,14 @@ int main(int argc, char *argv[])
report_prefix_push(argv[1]);
test_sw_incr();
report_prefix_pop();
+ } else if (strcmp(argv[1], "pmu-chained-counters") == 0) {
+ report_prefix_push(argv[1]);
+ test_chained_counters();
+ report_prefix_pop();
+ } else if (strcmp(argv[1], "pmu-chained-sw-incr") == 0) {
+ report_prefix_push(argv[1]);
+ test_chained_sw_incr();
+ report_prefix_pop();
} else {
report_abort("Unknown sub-test '%s'", argv[1]);
}
diff --git a/arm/unittests.cfg b/arm/unittests.cfg
index 175afe68225a..d31dcbf6c56f 100644
--- a/arm/unittests.cfg
+++ b/arm/unittests.cfg
@@ -96,6 +96,18 @@ groups = pmu
arch = arm64
extra_params = -append 'pmu-sw-incr'
+[pmu-chained-counters]
+file = pmu.flat
+groups = pmu
+arch = arm64
+extra_params = -append 'pmu-chained-counters'
+
+[pmu-chained-sw-incr]
+file = pmu.flat
+groups = pmu
+arch = arm64
+extra_params = -append 'pmu-chained-sw-incr'
+
# Test PMU support (TCG) with -icount IPC=1
#[pmu-tcg-icount-1]
#file = pmu.flat
--
2.25.1
_______________________________________________
kvmarm mailing list
kvmarm@lists.cs.columbia.edu
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
next prev parent reply other threads:[~2020-04-04 14:38 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-04 14:36 [PULL kvm-unit-tests 00/39] arm/arm64: The old and new Andrew Jones
2020-04-04 14:36 ` [PULL kvm-unit-tests 01/39] Makefile: Use no-stack-protector compiler options Andrew Jones
2020-04-04 14:36 ` [PULL kvm-unit-tests 02/39] arm/arm64: psci: Don't run C code without stack or vectors Andrew Jones
2020-04-04 14:36 ` [PULL kvm-unit-tests 03/39] arm64: timer: Add ISB after register writes Andrew Jones
2020-04-04 14:36 ` [PULL kvm-unit-tests 04/39] arm64: timer: Add ISB before reading the counter value Andrew Jones
2020-04-04 14:36 ` [PULL kvm-unit-tests 05/39] arm64: timer: Make irq_received volatile Andrew Jones
2020-04-04 14:36 ` [PULL kvm-unit-tests 06/39] arm64: timer: EOIR the interrupt after masking the timer Andrew Jones
2020-04-04 14:36 ` [PULL kvm-unit-tests 07/39] arm64: timer: Wait for the GIC to sample timer interrupt state Andrew Jones
2020-04-04 14:37 ` [PULL kvm-unit-tests 08/39] arm64: timer: Check the " Andrew Jones
2020-04-04 14:37 ` [PULL kvm-unit-tests 09/39] arm64: timer: Test behavior when timer disabled or masked Andrew Jones
2020-04-04 14:37 ` [PULL kvm-unit-tests 10/39] arm/arm64: Perform dcache clean + invalidate after turning MMU off Andrew Jones
2020-04-04 14:37 ` [PULL kvm-unit-tests 11/39] arm/arm64: gic: Move gic_state enumeration to asm/gic.h Andrew Jones
2020-04-04 14:37 ` [PULL kvm-unit-tests 12/39] arm64: timer: Use the proper RDist register name in GICv3 Andrew Jones
2020-04-04 14:37 ` [PULL kvm-unit-tests 13/39] arm64: timer: Use existing helpers to access counter/timers Andrew Jones
2020-04-04 14:37 ` [PULL kvm-unit-tests 14/39] arm64: timer: Speed up gic-timer-state check Andrew Jones
2020-04-04 14:37 ` [PULL kvm-unit-tests 15/39] arm64: Provide read/write_sysreg_s Andrew Jones
2020-04-04 14:37 ` [PULL kvm-unit-tests 16/39] arm: pmu: Let pmu tests take a sub-test parameter Andrew Jones
2020-04-04 14:37 ` [PULL kvm-unit-tests 17/39] arm: pmu: Don't check PMCR.IMP anymore Andrew Jones
2020-04-04 14:37 ` [PULL kvm-unit-tests 18/39] arm: pmu: Add a pmu struct Andrew Jones
2020-04-04 14:37 ` [PULL kvm-unit-tests 19/39] arm: pmu: Introduce defines for PMU versions Andrew Jones
2020-04-04 14:37 ` [PULL kvm-unit-tests 20/39] arm: pmu: Check Required Event Support Andrew Jones
2020-04-04 14:37 ` [PULL kvm-unit-tests 21/39] arm: pmu: Basic event counter Tests Andrew Jones
2020-04-04 14:37 ` [PULL kvm-unit-tests 22/39] arm: pmu: Test SW_INCR event count Andrew Jones
2020-04-04 14:37 ` Andrew Jones [this message]
2020-04-04 14:37 ` [PULL kvm-unit-tests 24/39] arm: pmu: test 32-bit <-> 64-bit transitions Andrew Jones
2020-04-04 14:37 ` [PULL kvm-unit-tests 25/39] arm: gic: Introduce gic_irq_set_clr_enable() helper Andrew Jones
2020-04-04 14:37 ` [PULL kvm-unit-tests 26/39] arm: pmu: Test overflow interrupts Andrew Jones
2020-04-04 14:37 ` [PULL kvm-unit-tests 27/39] libcflat: Add other size defines Andrew Jones
2020-04-04 14:37 ` [PULL kvm-unit-tests 28/39] page_alloc: Introduce get_order() Andrew Jones
2020-04-04 14:37 ` [PULL kvm-unit-tests 29/39] arm/arm64: gic: Introduce setup_irq() helper Andrew Jones
2020-04-04 14:37 ` [PULL kvm-unit-tests 30/39] arm/arm64: gicv3: Add some re-distributor defines Andrew Jones
2020-04-04 14:37 ` [PULL kvm-unit-tests 31/39] arm/arm64: gicv3: Set the LPI config and pending tables Andrew Jones
2020-04-04 14:37 ` [PULL kvm-unit-tests 32/39] arm/arm64: ITS: Introspection tests Andrew Jones
2020-04-04 14:37 ` [PULL kvm-unit-tests 33/39] arm/arm64: ITS: its_enable_defaults Andrew Jones
2020-04-04 14:37 ` [PULL kvm-unit-tests 34/39] arm/arm64: ITS: Device and collection Initialization Andrew Jones
2020-04-04 14:37 ` [PULL kvm-unit-tests 35/39] arm/arm64: ITS: Commands Andrew Jones
2020-04-04 14:37 ` [PULL kvm-unit-tests 36/39] arm/arm64: ITS: INT functional tests Andrew Jones
2020-04-04 14:37 ` [PULL kvm-unit-tests 37/39] arm/run: Allow Migration tests Andrew Jones
2020-04-04 14:37 ` [PULL kvm-unit-tests 38/39] arm/arm64: ITS: migration tests Andrew Jones
2020-04-04 14:37 ` [PULL kvm-unit-tests 39/39] arm/arm64: ITS: pending table migration test Andrew Jones
2020-04-07 15:28 ` [PULL kvm-unit-tests 00/39] arm/arm64: The old and new Paolo Bonzini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200404143731.208138-24-drjones@redhat.com \
--to=drjones@redhat.com \
--cc=kvm@vger.kernel.org \
--cc=kvmarm@lists.cs.columbia.edu \
--cc=pbonzini@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox