[PULL kvm-unit-tests 31/39] arm/arm64: gicv3: Set the LPI config and pending tables

[Andrew Jones <drjones@redhat.com>]

From: Eric Auger <eric.auger@redhat.com>

Allocate the LPI configuration and per re-distributor pending table.
Set redistributor's PROPBASER and PENDBASER. The LPIs are enabled
by default in the config table.

Also introduce a helper routine that allows to set the pending
table bit for a given LPI and macros to set/get its configuration.

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Andrew Jones <drjones@redhat.com>
---
 lib/arm/asm/gic-v3.h | 17 ++++++++++++++
 lib/arm/gic-v3.c     | 53 ++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 70 insertions(+)

diff --git a/lib/arm/asm/gic-v3.h b/lib/arm/asm/gic-v3.h
index 47df05159ac8..fedffa8e0843 100644
--- a/lib/arm/asm/gic-v3.h
+++ b/lib/arm/asm/gic-v3.h
@@ -50,6 +50,13 @@
 #define MPIDR_TO_SGI_AFFINITY(cluster_id, level) \
 	(MPIDR_AFFINITY_LEVEL(cluster_id, level) << ICC_SGI1R_AFFINITY_## level ## _SHIFT)
 
+#define GICR_PENDBASER_PTZ		BIT_ULL(62)
+
+#define LPI_PROP_GROUP1			(1 << 1)
+#define LPI_PROP_ENABLED		(1 << 0)
+#define LPI_PROP_DEFAULT_PRIO		0xa0
+#define LPI_PROP_DEFAULT		(LPI_PROP_DEFAULT_PRIO | LPI_PROP_GROUP1 | LPI_PROP_ENABLED)
+
 #include <asm/arch_gicv3.h>
 
 #ifndef __ASSEMBLY__
@@ -66,6 +73,8 @@ struct gicv3_data {
 	void *dist_base;
 	void *redist_bases[GICV3_NR_REDISTS];
 	void *redist_base[NR_CPUS];
+	u8 *lpi_prop;
+	void *lpi_pend[NR_CPUS];
 	unsigned int irq_nr;
 };
 extern struct gicv3_data gicv3_data;
@@ -82,6 +91,8 @@ extern void gicv3_write_eoir(u32 irqstat);
 extern void gicv3_ipi_send_single(int irq, int cpu);
 extern void gicv3_ipi_send_mask(int irq, const cpumask_t *dest);
 extern void gicv3_set_redist_base(size_t stride);
+extern void gicv3_lpi_set_clr_pending(int rdist, int n, bool set);
+extern void gicv3_lpi_alloc_tables(void);
 
 static inline void gicv3_do_wait_for_rwp(void *base)
 {
@@ -127,5 +138,11 @@ static inline u64 mpidr_uncompress(u32 compressed)
 	return mpidr;
 }
 
+#define gicv3_lpi_set_config(intid, value) ({		\
+	gicv3_data.lpi_prop[LPI_OFFSET(intid)] = value;	\
+})
+
+#define gicv3_lpi_get_config(intid) (gicv3_data.lpi_prop[LPI_OFFSET(intid)])
+
 #endif /* !__ASSEMBLY__ */
 #endif /* _ASMARM_GIC_V3_H_ */
diff --git a/lib/arm/gic-v3.c b/lib/arm/gic-v3.c
index feecb5e67caf..6cf1d1d27340 100644
--- a/lib/arm/gic-v3.c
+++ b/lib/arm/gic-v3.c
@@ -5,6 +5,7 @@
  */
 #include <asm/gic.h>
 #include <asm/io.h>
+#include <alloc_page.h>
 
 void gicv3_set_redist_base(size_t stride)
 {
@@ -147,3 +148,55 @@ void gicv3_ipi_send_single(int irq, int cpu)
 	cpumask_set_cpu(cpu, &dest);
 	gicv3_ipi_send_mask(irq, &dest);
 }
+
+#if defined(__aarch64__)
+
+/*
+ * alloc_lpi_tables - Allocate LPI config and pending tables
+ * and set PROPBASER (shared by all rdistributors) and per
+ * redistributor PENDBASER.
+ *
+ * gicv3_set_redist_base() must be called before
+ */
+void gicv3_lpi_alloc_tables(void)
+{
+	unsigned long n = SZ_64K >> PAGE_SHIFT;
+	unsigned long order = fls(n);
+	u64 prop_val;
+	int cpu;
+
+	assert(gicv3_redist_base());
+
+	gicv3_data.lpi_prop = alloc_pages(order);
+
+	/* ID bits = 13, ie. up to 14b LPI INTID */
+	prop_val = (u64)(virt_to_phys(gicv3_data.lpi_prop)) | 13;
+
+	for_each_present_cpu(cpu) {
+		u64 pend_val;
+		void *ptr;
+
+		ptr = gicv3_data.redist_base[cpu];
+
+		writeq(prop_val, ptr + GICR_PROPBASER);
+
+		gicv3_data.lpi_pend[cpu] = alloc_pages(order);
+		pend_val = (u64)(virt_to_phys(gicv3_data.lpi_pend[cpu]));
+		writeq(pend_val, ptr + GICR_PENDBASER);
+	}
+}
+
+void gicv3_lpi_set_clr_pending(int rdist, int n, bool set)
+{
+	u8 *ptr = gicv3_data.lpi_pend[rdist];
+	u8 mask = 1 << (n % 8), byte;
+
+	ptr += (n / 8);
+	byte = *ptr;
+	if (set)
+		byte |=  mask;
+	else
+		byte &= ~mask;
+	*ptr = byte;
+}
+#endif /* __aarch64__ */
-- 
2.25.1

_______________________________________________
kvmarm mailing list
kvmarm@lists.cs.columbia.edu
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm