From: Andrew Jones <drjones@redhat.com>
To: pbonzini@redhat.com
Cc: kvmarm@lists.cs.columbia.edu, kvm@vger.kernel.org
Subject: [PULL kvm-unit-tests 26/39] arm: pmu: Test overflow interrupts
Date: Sat, 4 Apr 2020 16:37:18 +0200 [thread overview]
Message-ID: <20200404143731.208138-27-drjones@redhat.com> (raw)
In-Reply-To: <20200404143731.208138-1-drjones@redhat.com>
From: Eric Auger <eric.auger@redhat.com>
Test overflows for MEM_ACCESS and SW_INCR events. Also tests
overflows with 64-bit events.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Andrew Jones <drjones@redhat.com>
---
arm/pmu.c | 139 ++++++++++++++++++++++++++++++++++++++++++++++
arm/unittests.cfg | 6 ++
2 files changed, 145 insertions(+)
diff --git a/arm/pmu.c b/arm/pmu.c
index 9602e70f4185..cece53ef6431 100644
--- a/arm/pmu.c
+++ b/arm/pmu.c
@@ -59,12 +59,20 @@
#define PRE_OVERFLOW 0xFFFFFFF0
#define PRE_OVERFLOW2 0xFFFFFFDC
+#define PMU_PPI 23
+
struct pmu {
unsigned int version;
unsigned int nb_implemented_counters;
uint32_t pmcr_ro;
};
+struct pmu_stats {
+ unsigned long bitmap;
+ uint32_t interrupts[32];
+ bool unexpected;
+};
+
static struct pmu pmu;
#if defined(__arm__)
@@ -146,6 +154,7 @@ static void test_sw_incr(void) {}
static void test_chained_counters(void) {}
static void test_chained_sw_incr(void) {}
static void test_chain_promotion(void) {}
+static void test_overflow_interrupt(void) {}
#elif defined(__aarch64__)
#define ID_AA64DFR0_PERFMON_SHIFT 8
@@ -276,6 +285,43 @@ asm volatile(
: "x9", "x10", "cc");
}
+static struct pmu_stats pmu_stats;
+
+static void irq_handler(struct pt_regs *regs)
+{
+ uint32_t irqstat, irqnr;
+
+ irqstat = gic_read_iar();
+ irqnr = gic_iar_irqnr(irqstat);
+
+ if (irqnr == PMU_PPI) {
+ unsigned long overflows = read_sysreg(pmovsclr_el0);
+ int i;
+
+ for (i = 0; i < 32; i++) {
+ if (test_and_clear_bit(i, &overflows)) {
+ pmu_stats.interrupts[i]++;
+ pmu_stats.bitmap |= 1 << i;
+ }
+ }
+ write_sysreg(ALL_SET, pmovsclr_el0);
+ } else {
+ pmu_stats.unexpected = true;
+ }
+ gic_write_eoir(irqstat);
+}
+
+static void pmu_reset_stats(void)
+{
+ int i;
+
+ for (i = 0; i < 32; i++)
+ pmu_stats.interrupts[i] = 0;
+
+ pmu_stats.bitmap = 0;
+ pmu_stats.unexpected = false;
+}
+
static void pmu_reset(void)
{
/* reset all counters, counting disabled at PMCR level*/
@@ -286,6 +332,7 @@ static void pmu_reset(void)
write_sysreg(ALL_SET, pmovsclr_el0);
/* disable overflow interrupts on all counters */
write_sysreg(ALL_SET, pmintenclr_el1);
+ pmu_reset_stats();
isb();
}
@@ -728,6 +775,94 @@ static void test_chain_promotion(void)
read_sysreg(pmovsclr_el0));
}
+static bool expect_interrupts(uint32_t bitmap)
+{
+ int i;
+
+ if (pmu_stats.bitmap ^ bitmap || pmu_stats.unexpected)
+ return false;
+
+ for (i = 0; i < 32; i++) {
+ if (test_and_clear_bit(i, &pmu_stats.bitmap))
+ if (pmu_stats.interrupts[i] != 1)
+ return false;
+ }
+ return true;
+}
+
+static void test_overflow_interrupt(void)
+{
+ uint32_t events[] = {MEM_ACCESS, SW_INCR};
+ void *addr = malloc(PAGE_SIZE);
+ int i;
+
+ if (!satisfy_prerequisites(events, ARRAY_SIZE(events)))
+ return;
+
+ gic_enable_defaults();
+ install_irq_handler(EL1H_IRQ, irq_handler);
+ local_irq_enable();
+ gic_enable_irq(23);
+
+ pmu_reset();
+
+ write_regn_el0(pmevtyper, 0, MEM_ACCESS | PMEVTYPER_EXCLUDE_EL0);
+ write_regn_el0(pmevtyper, 1, SW_INCR | PMEVTYPER_EXCLUDE_EL0);
+ write_sysreg_s(0x3, PMCNTENSET_EL0);
+ write_regn_el0(pmevcntr, 0, PRE_OVERFLOW);
+ write_regn_el0(pmevcntr, 1, PRE_OVERFLOW);
+ isb();
+
+ /* interrupts are disabled */
+
+ mem_access_loop(addr, 200, pmu.pmcr_ro | PMU_PMCR_E);
+ report(expect_interrupts(0), "no overflow interrupt after preset");
+
+ set_pmcr(pmu.pmcr_ro | PMU_PMCR_E);
+ for (i = 0; i < 100; i++)
+ write_sysreg(0x2, pmswinc_el0);
+
+ set_pmcr(pmu.pmcr_ro);
+ report(expect_interrupts(0), "no overflow interrupt after counting");
+
+ /* enable interrupts */
+
+ pmu_reset_stats();
+
+ write_regn_el0(pmevcntr, 0, PRE_OVERFLOW);
+ write_regn_el0(pmevcntr, 1, PRE_OVERFLOW);
+ write_sysreg(ALL_SET, pmintenset_el1);
+ isb();
+
+ mem_access_loop(addr, 200, pmu.pmcr_ro | PMU_PMCR_E);
+ for (i = 0; i < 100; i++)
+ write_sysreg(0x3, pmswinc_el0);
+
+ mem_access_loop(addr, 200, pmu.pmcr_ro);
+ report_info("overflow=0x%lx", read_sysreg(pmovsclr_el0));
+ report(expect_interrupts(0x3),
+ "overflow interrupts expected on #0 and #1");
+
+ /* promote to 64-b */
+
+ pmu_reset_stats();
+
+ write_regn_el0(pmevtyper, 1, CHAIN | PMEVTYPER_EXCLUDE_EL0);
+ write_regn_el0(pmevcntr, 0, PRE_OVERFLOW);
+ isb();
+ mem_access_loop(addr, 200, pmu.pmcr_ro | PMU_PMCR_E);
+ report(expect_interrupts(0),
+ "no overflow interrupt expected on 32b boundary");
+
+ /* overflow on odd counter */
+ pmu_reset_stats();
+ write_regn_el0(pmevcntr, 0, PRE_OVERFLOW);
+ write_regn_el0(pmevcntr, 1, ALL_SET);
+ isb();
+ mem_access_loop(addr, 400, pmu.pmcr_ro | PMU_PMCR_E);
+ report(expect_interrupts(0x2),
+ "expect overflow interrupt on odd counter");
+}
#endif
/*
@@ -930,6 +1065,10 @@ int main(int argc, char *argv[])
report_prefix_push(argv[1]);
test_chain_promotion();
report_prefix_pop();
+ } else if (strcmp(argv[1], "pmu-overflow-interrupt") == 0) {
+ report_prefix_push(argv[1]);
+ test_overflow_interrupt();
+ report_prefix_pop();
} else {
report_abort("Unknown sub-test '%s'", argv[1]);
}
diff --git a/arm/unittests.cfg b/arm/unittests.cfg
index 1b0c8c8c7eef..455fd10d63c9 100644
--- a/arm/unittests.cfg
+++ b/arm/unittests.cfg
@@ -114,6 +114,12 @@ groups = pmu
arch = arm64
extra_params = -append 'pmu-chain-promotion'
+[pmu-overflow-interrupt]
+file = pmu.flat
+groups = pmu
+arch = arm64
+extra_params = -append 'pmu-overflow-interrupt'
+
# Test PMU support (TCG) with -icount IPC=1
#[pmu-tcg-icount-1]
#file = pmu.flat
--
2.25.1
_______________________________________________
kvmarm mailing list
kvmarm@lists.cs.columbia.edu
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
next prev parent reply other threads:[~2020-04-04 14:38 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-04 14:36 [PULL kvm-unit-tests 00/39] arm/arm64: The old and new Andrew Jones
2020-04-04 14:36 ` [PULL kvm-unit-tests 01/39] Makefile: Use no-stack-protector compiler options Andrew Jones
2020-04-04 14:36 ` [PULL kvm-unit-tests 02/39] arm/arm64: psci: Don't run C code without stack or vectors Andrew Jones
2020-04-04 14:36 ` [PULL kvm-unit-tests 03/39] arm64: timer: Add ISB after register writes Andrew Jones
2020-04-04 14:36 ` [PULL kvm-unit-tests 04/39] arm64: timer: Add ISB before reading the counter value Andrew Jones
2020-04-04 14:36 ` [PULL kvm-unit-tests 05/39] arm64: timer: Make irq_received volatile Andrew Jones
2020-04-04 14:36 ` [PULL kvm-unit-tests 06/39] arm64: timer: EOIR the interrupt after masking the timer Andrew Jones
2020-04-04 14:36 ` [PULL kvm-unit-tests 07/39] arm64: timer: Wait for the GIC to sample timer interrupt state Andrew Jones
2020-04-04 14:37 ` [PULL kvm-unit-tests 08/39] arm64: timer: Check the " Andrew Jones
2020-04-04 14:37 ` [PULL kvm-unit-tests 09/39] arm64: timer: Test behavior when timer disabled or masked Andrew Jones
2020-04-04 14:37 ` [PULL kvm-unit-tests 10/39] arm/arm64: Perform dcache clean + invalidate after turning MMU off Andrew Jones
2020-04-04 14:37 ` [PULL kvm-unit-tests 11/39] arm/arm64: gic: Move gic_state enumeration to asm/gic.h Andrew Jones
2020-04-04 14:37 ` [PULL kvm-unit-tests 12/39] arm64: timer: Use the proper RDist register name in GICv3 Andrew Jones
2020-04-04 14:37 ` [PULL kvm-unit-tests 13/39] arm64: timer: Use existing helpers to access counter/timers Andrew Jones
2020-04-04 14:37 ` [PULL kvm-unit-tests 14/39] arm64: timer: Speed up gic-timer-state check Andrew Jones
2020-04-04 14:37 ` [PULL kvm-unit-tests 15/39] arm64: Provide read/write_sysreg_s Andrew Jones
2020-04-04 14:37 ` [PULL kvm-unit-tests 16/39] arm: pmu: Let pmu tests take a sub-test parameter Andrew Jones
2020-04-04 14:37 ` [PULL kvm-unit-tests 17/39] arm: pmu: Don't check PMCR.IMP anymore Andrew Jones
2020-04-04 14:37 ` [PULL kvm-unit-tests 18/39] arm: pmu: Add a pmu struct Andrew Jones
2020-04-04 14:37 ` [PULL kvm-unit-tests 19/39] arm: pmu: Introduce defines for PMU versions Andrew Jones
2020-04-04 14:37 ` [PULL kvm-unit-tests 20/39] arm: pmu: Check Required Event Support Andrew Jones
2020-04-04 14:37 ` [PULL kvm-unit-tests 21/39] arm: pmu: Basic event counter Tests Andrew Jones
2020-04-04 14:37 ` [PULL kvm-unit-tests 22/39] arm: pmu: Test SW_INCR event count Andrew Jones
2020-04-04 14:37 ` [PULL kvm-unit-tests 23/39] arm: pmu: Test chained counters Andrew Jones
2020-04-04 14:37 ` [PULL kvm-unit-tests 24/39] arm: pmu: test 32-bit <-> 64-bit transitions Andrew Jones
2020-04-04 14:37 ` [PULL kvm-unit-tests 25/39] arm: gic: Introduce gic_irq_set_clr_enable() helper Andrew Jones
2020-04-04 14:37 ` Andrew Jones [this message]
2020-04-04 14:37 ` [PULL kvm-unit-tests 27/39] libcflat: Add other size defines Andrew Jones
2020-04-04 14:37 ` [PULL kvm-unit-tests 28/39] page_alloc: Introduce get_order() Andrew Jones
2020-04-04 14:37 ` [PULL kvm-unit-tests 29/39] arm/arm64: gic: Introduce setup_irq() helper Andrew Jones
2020-04-04 14:37 ` [PULL kvm-unit-tests 30/39] arm/arm64: gicv3: Add some re-distributor defines Andrew Jones
2020-04-04 14:37 ` [PULL kvm-unit-tests 31/39] arm/arm64: gicv3: Set the LPI config and pending tables Andrew Jones
2020-04-04 14:37 ` [PULL kvm-unit-tests 32/39] arm/arm64: ITS: Introspection tests Andrew Jones
2020-04-04 14:37 ` [PULL kvm-unit-tests 33/39] arm/arm64: ITS: its_enable_defaults Andrew Jones
2020-04-04 14:37 ` [PULL kvm-unit-tests 34/39] arm/arm64: ITS: Device and collection Initialization Andrew Jones
2020-04-04 14:37 ` [PULL kvm-unit-tests 35/39] arm/arm64: ITS: Commands Andrew Jones
2020-04-04 14:37 ` [PULL kvm-unit-tests 36/39] arm/arm64: ITS: INT functional tests Andrew Jones
2020-04-04 14:37 ` [PULL kvm-unit-tests 37/39] arm/run: Allow Migration tests Andrew Jones
2020-04-04 14:37 ` [PULL kvm-unit-tests 38/39] arm/arm64: ITS: migration tests Andrew Jones
2020-04-04 14:37 ` [PULL kvm-unit-tests 39/39] arm/arm64: ITS: pending table migration test Andrew Jones
2020-04-07 15:28 ` [PULL kvm-unit-tests 00/39] arm/arm64: The old and new Paolo Bonzini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200404143731.208138-27-drjones@redhat.com \
--to=drjones@redhat.com \
--cc=kvm@vger.kernel.org \
--cc=kvmarm@lists.cs.columbia.edu \
--cc=pbonzini@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox