public inbox for kvmarm@lists.cs.columbia.edu
 help / color / mirror / Atom feed
From: Marc Zyngier <maz@kernel.org>
To: linux-arm-kernel@lists.infradead.org,
	<kvmarm@lists.cs.columbia.edu>, <kvmarm@lists.linux.dev>,
	kvm@vger.kernel.org
Subject: [PATCH v4 10/16] KVM: arm64: PMU: Move the ID_AA64DFR0_EL1.PMUver limit to VM creation
Date: Sun, 13 Nov 2022 16:38:26 +0000	[thread overview]
Message-ID: <20221113163832.3154370-11-maz@kernel.org> (raw)
In-Reply-To: <20221113163832.3154370-1-maz@kernel.org>

As further patches will enable the selection of a PMU revision
from userspace, sample the supported PMU revision at VM creation
time, rather than building each time the ID_AA64DFR0_EL1 register
is accessed.

This shouldn't result in any change in behaviour.

Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
---
 arch/arm64/include/asm/kvm_host.h |  4 ++++
 arch/arm64/kvm/arm.c              |  6 ++++++
 arch/arm64/kvm/pmu-emul.c         | 11 ++++++++++
 arch/arm64/kvm/sys_regs.c         | 36 ++++++++++++++++++++++++-------
 include/kvm/arm_pmu.h             |  6 ++++++
 5 files changed, 55 insertions(+), 8 deletions(-)

diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h
index 45e2136322ba..cc44e3bc528d 100644
--- a/arch/arm64/include/asm/kvm_host.h
+++ b/arch/arm64/include/asm/kvm_host.h
@@ -163,6 +163,10 @@ struct kvm_arch {
 
 	u8 pfr0_csv2;
 	u8 pfr0_csv3;
+	struct {
+		u8 imp:4;
+		u8 unimp:4;
+	} dfr0_pmuver;
 
 	/* Hypercall features firmware registers' descriptor */
 	struct kvm_smccc_features smccc_feat;
diff --git a/arch/arm64/kvm/arm.c b/arch/arm64/kvm/arm.c
index 94d33e296e10..f956aab438c7 100644
--- a/arch/arm64/kvm/arm.c
+++ b/arch/arm64/kvm/arm.c
@@ -164,6 +164,12 @@ int kvm_arch_init_vm(struct kvm *kvm, unsigned long type)
 	set_default_spectre(kvm);
 	kvm_arm_init_hypercalls(kvm);
 
+	/*
+	 * Initialise the default PMUver before there is a chance to
+	 * create an actual PMU.
+	 */
+	kvm->arch.dfr0_pmuver.imp = kvm_arm_pmu_get_pmuver_limit();
+
 	return ret;
 out_free_stage2_pgd:
 	kvm_free_stage2_pgd(&kvm->arch.mmu);
diff --git a/arch/arm64/kvm/pmu-emul.c b/arch/arm64/kvm/pmu-emul.c
index 419e5e0a13d0..4320c389fa7f 100644
--- a/arch/arm64/kvm/pmu-emul.c
+++ b/arch/arm64/kvm/pmu-emul.c
@@ -1047,3 +1047,14 @@ int kvm_arm_pmu_v3_has_attr(struct kvm_vcpu *vcpu, struct kvm_device_attr *attr)
 
 	return -ENXIO;
 }
+
+u8 kvm_arm_pmu_get_pmuver_limit(void)
+{
+	u64 tmp;
+
+	tmp = read_sanitised_ftr_reg(SYS_ID_AA64DFR0_EL1);
+	tmp = cpuid_feature_cap_perfmon_field(tmp,
+					      ID_AA64DFR0_EL1_PMUVer_SHIFT,
+					      ID_AA64DFR0_EL1_PMUVer_V3P4);
+	return FIELD_GET(ARM64_FEATURE_MASK(ID_AA64DFR0_EL1_PMUVer), tmp);
+}
diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c
index f4a7c5abcbca..1d887fe289d8 100644
--- a/arch/arm64/kvm/sys_regs.c
+++ b/arch/arm64/kvm/sys_regs.c
@@ -1062,6 +1062,27 @@ static bool access_arch_timer(struct kvm_vcpu *vcpu,
 	return true;
 }
 
+static u8 vcpu_pmuver(const struct kvm_vcpu *vcpu)
+{
+	if (kvm_vcpu_has_pmu(vcpu))
+		return vcpu->kvm->arch.dfr0_pmuver.imp;
+
+	return vcpu->kvm->arch.dfr0_pmuver.unimp;
+}
+
+static u8 pmuver_to_perfmon(u8 pmuver)
+{
+	switch (pmuver) {
+	case ID_AA64DFR0_EL1_PMUVer_IMP:
+		return ID_DFR0_PERFMON_8_0;
+	case ID_AA64DFR0_EL1_PMUVer_IMP_DEF:
+		return ID_DFR0_PERFMON_IMP_DEF;
+	default:
+		/* Anything ARMv8.1+ has the same value. For now. */
+		return pmuver;
+	}
+}
+
 /* Read a sanitised cpufeature ID register by sys_reg_desc */
 static u64 read_id_reg(const struct kvm_vcpu *vcpu, struct sys_reg_desc const *r)
 {
@@ -1111,18 +1132,17 @@ static u64 read_id_reg(const struct kvm_vcpu *vcpu, struct sys_reg_desc const *r
 		/* Limit debug to ARMv8.0 */
 		val &= ~ARM64_FEATURE_MASK(ID_AA64DFR0_EL1_DebugVer);
 		val |= FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64DFR0_EL1_DebugVer), 6);
-		/* Limit guests to PMUv3 for ARMv8.4 */
-		val = cpuid_feature_cap_perfmon_field(val,
-						      ID_AA64DFR0_EL1_PMUVer_SHIFT,
-						      kvm_vcpu_has_pmu(vcpu) ? ID_AA64DFR0_EL1_PMUVer_V3P4 : 0);
+		/* Set PMUver to the required version */
+		val &= ~ARM64_FEATURE_MASK(ID_AA64DFR0_EL1_PMUVer);
+		val |= FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64DFR0_EL1_PMUVer),
+				  vcpu_pmuver(vcpu));
 		/* Hide SPE from guests */
 		val &= ~ARM64_FEATURE_MASK(ID_AA64DFR0_EL1_PMSVer);
 		break;
 	case SYS_ID_DFR0_EL1:
-		/* Limit guests to PMUv3 for ARMv8.4 */
-		val = cpuid_feature_cap_perfmon_field(val,
-						      ID_DFR0_PERFMON_SHIFT,
-						      kvm_vcpu_has_pmu(vcpu) ? ID_DFR0_PERFMON_8_4 : 0);
+		val &= ~ARM64_FEATURE_MASK(ID_DFR0_PERFMON);
+		val |= FIELD_PREP(ARM64_FEATURE_MASK(ID_DFR0_PERFMON),
+				  pmuver_to_perfmon(vcpu_pmuver(vcpu)));
 		break;
 	}
 
diff --git a/include/kvm/arm_pmu.h b/include/kvm/arm_pmu.h
index 96b192139a23..812f729c9108 100644
--- a/include/kvm/arm_pmu.h
+++ b/include/kvm/arm_pmu.h
@@ -89,6 +89,8 @@ void kvm_vcpu_pmu_restore_host(struct kvm_vcpu *vcpu);
 			vcpu->arch.pmu.events = *kvm_get_pmu_events();	\
 	} while (0)
 
+u8 kvm_arm_pmu_get_pmuver_limit(void);
+
 #else
 struct kvm_pmu {
 };
@@ -154,6 +156,10 @@ static inline u64 kvm_pmu_get_pmceid(struct kvm_vcpu *vcpu, bool pmceid1)
 static inline void kvm_pmu_update_vcpu_events(struct kvm_vcpu *vcpu) {}
 static inline void kvm_vcpu_pmu_restore_guest(struct kvm_vcpu *vcpu) {}
 static inline void kvm_vcpu_pmu_restore_host(struct kvm_vcpu *vcpu) {}
+static inline u8 kvm_arm_pmu_get_pmuver_limit(void)
+{
+	return 0;
+}
 
 #endif
 
-- 
2.34.1

_______________________________________________
kvmarm mailing list
kvmarm@lists.cs.columbia.edu
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm

WARNING: multiple messages have this Message-ID (diff)
From: Marc Zyngier <maz@kernel.org>
To: linux-arm-kernel@lists.infradead.org,
	<kvmarm@lists.cs.columbia.edu>, <kvmarm@lists.linux.dev>,
	kvm@vger.kernel.org
Cc: James Morse <james.morse@arm.com>,
	Suzuki K Poulose <suzuki.poulose@arm.com>,
	Alexandru Elisei <alexandru.elisei@arm.com>,
	Oliver Upton <oliver.upton@linux.dev>,
	Ricardo Koller <ricarkol@google.com>,
	Reiji Watanabe <reijiw@google.com>
Subject: [PATCH v4 10/16] KVM: arm64: PMU: Move the ID_AA64DFR0_EL1.PMUver limit to VM creation
Date: Sun, 13 Nov 2022 16:38:26 +0000	[thread overview]
Message-ID: <20221113163832.3154370-11-maz@kernel.org> (raw)
Message-ID: <20221113163826.Iz-vOs2x2HZRwq3j12MsvcjgAL1jY92xyZGWc6dibr4@z> (raw)
In-Reply-To: <20221113163832.3154370-1-maz@kernel.org>

As further patches will enable the selection of a PMU revision
from userspace, sample the supported PMU revision at VM creation
time, rather than building each time the ID_AA64DFR0_EL1 register
is accessed.

This shouldn't result in any change in behaviour.

Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
---
 arch/arm64/include/asm/kvm_host.h |  4 ++++
 arch/arm64/kvm/arm.c              |  6 ++++++
 arch/arm64/kvm/pmu-emul.c         | 11 ++++++++++
 arch/arm64/kvm/sys_regs.c         | 36 ++++++++++++++++++++++++-------
 include/kvm/arm_pmu.h             |  6 ++++++
 5 files changed, 55 insertions(+), 8 deletions(-)

diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h
index 45e2136322ba..cc44e3bc528d 100644
--- a/arch/arm64/include/asm/kvm_host.h
+++ b/arch/arm64/include/asm/kvm_host.h
@@ -163,6 +163,10 @@ struct kvm_arch {
 
 	u8 pfr0_csv2;
 	u8 pfr0_csv3;
+	struct {
+		u8 imp:4;
+		u8 unimp:4;
+	} dfr0_pmuver;
 
 	/* Hypercall features firmware registers' descriptor */
 	struct kvm_smccc_features smccc_feat;
diff --git a/arch/arm64/kvm/arm.c b/arch/arm64/kvm/arm.c
index 94d33e296e10..f956aab438c7 100644
--- a/arch/arm64/kvm/arm.c
+++ b/arch/arm64/kvm/arm.c
@@ -164,6 +164,12 @@ int kvm_arch_init_vm(struct kvm *kvm, unsigned long type)
 	set_default_spectre(kvm);
 	kvm_arm_init_hypercalls(kvm);
 
+	/*
+	 * Initialise the default PMUver before there is a chance to
+	 * create an actual PMU.
+	 */
+	kvm->arch.dfr0_pmuver.imp = kvm_arm_pmu_get_pmuver_limit();
+
 	return ret;
 out_free_stage2_pgd:
 	kvm_free_stage2_pgd(&kvm->arch.mmu);
diff --git a/arch/arm64/kvm/pmu-emul.c b/arch/arm64/kvm/pmu-emul.c
index 419e5e0a13d0..4320c389fa7f 100644
--- a/arch/arm64/kvm/pmu-emul.c
+++ b/arch/arm64/kvm/pmu-emul.c
@@ -1047,3 +1047,14 @@ int kvm_arm_pmu_v3_has_attr(struct kvm_vcpu *vcpu, struct kvm_device_attr *attr)
 
 	return -ENXIO;
 }
+
+u8 kvm_arm_pmu_get_pmuver_limit(void)
+{
+	u64 tmp;
+
+	tmp = read_sanitised_ftr_reg(SYS_ID_AA64DFR0_EL1);
+	tmp = cpuid_feature_cap_perfmon_field(tmp,
+					      ID_AA64DFR0_EL1_PMUVer_SHIFT,
+					      ID_AA64DFR0_EL1_PMUVer_V3P4);
+	return FIELD_GET(ARM64_FEATURE_MASK(ID_AA64DFR0_EL1_PMUVer), tmp);
+}
diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c
index f4a7c5abcbca..1d887fe289d8 100644
--- a/arch/arm64/kvm/sys_regs.c
+++ b/arch/arm64/kvm/sys_regs.c
@@ -1062,6 +1062,27 @@ static bool access_arch_timer(struct kvm_vcpu *vcpu,
 	return true;
 }
 
+static u8 vcpu_pmuver(const struct kvm_vcpu *vcpu)
+{
+	if (kvm_vcpu_has_pmu(vcpu))
+		return vcpu->kvm->arch.dfr0_pmuver.imp;
+
+	return vcpu->kvm->arch.dfr0_pmuver.unimp;
+}
+
+static u8 pmuver_to_perfmon(u8 pmuver)
+{
+	switch (pmuver) {
+	case ID_AA64DFR0_EL1_PMUVer_IMP:
+		return ID_DFR0_PERFMON_8_0;
+	case ID_AA64DFR0_EL1_PMUVer_IMP_DEF:
+		return ID_DFR0_PERFMON_IMP_DEF;
+	default:
+		/* Anything ARMv8.1+ has the same value. For now. */
+		return pmuver;
+	}
+}
+
 /* Read a sanitised cpufeature ID register by sys_reg_desc */
 static u64 read_id_reg(const struct kvm_vcpu *vcpu, struct sys_reg_desc const *r)
 {
@@ -1111,18 +1132,17 @@ static u64 read_id_reg(const struct kvm_vcpu *vcpu, struct sys_reg_desc const *r
 		/* Limit debug to ARMv8.0 */
 		val &= ~ARM64_FEATURE_MASK(ID_AA64DFR0_EL1_DebugVer);
 		val |= FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64DFR0_EL1_DebugVer), 6);
-		/* Limit guests to PMUv3 for ARMv8.4 */
-		val = cpuid_feature_cap_perfmon_field(val,
-						      ID_AA64DFR0_EL1_PMUVer_SHIFT,
-						      kvm_vcpu_has_pmu(vcpu) ? ID_AA64DFR0_EL1_PMUVer_V3P4 : 0);
+		/* Set PMUver to the required version */
+		val &= ~ARM64_FEATURE_MASK(ID_AA64DFR0_EL1_PMUVer);
+		val |= FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64DFR0_EL1_PMUVer),
+				  vcpu_pmuver(vcpu));
 		/* Hide SPE from guests */
 		val &= ~ARM64_FEATURE_MASK(ID_AA64DFR0_EL1_PMSVer);
 		break;
 	case SYS_ID_DFR0_EL1:
-		/* Limit guests to PMUv3 for ARMv8.4 */
-		val = cpuid_feature_cap_perfmon_field(val,
-						      ID_DFR0_PERFMON_SHIFT,
-						      kvm_vcpu_has_pmu(vcpu) ? ID_DFR0_PERFMON_8_4 : 0);
+		val &= ~ARM64_FEATURE_MASK(ID_DFR0_PERFMON);
+		val |= FIELD_PREP(ARM64_FEATURE_MASK(ID_DFR0_PERFMON),
+				  pmuver_to_perfmon(vcpu_pmuver(vcpu)));
 		break;
 	}
 
diff --git a/include/kvm/arm_pmu.h b/include/kvm/arm_pmu.h
index 96b192139a23..812f729c9108 100644
--- a/include/kvm/arm_pmu.h
+++ b/include/kvm/arm_pmu.h
@@ -89,6 +89,8 @@ void kvm_vcpu_pmu_restore_host(struct kvm_vcpu *vcpu);
 			vcpu->arch.pmu.events = *kvm_get_pmu_events();	\
 	} while (0)
 
+u8 kvm_arm_pmu_get_pmuver_limit(void);
+
 #else
 struct kvm_pmu {
 };
@@ -154,6 +156,10 @@ static inline u64 kvm_pmu_get_pmceid(struct kvm_vcpu *vcpu, bool pmceid1)
 static inline void kvm_pmu_update_vcpu_events(struct kvm_vcpu *vcpu) {}
 static inline void kvm_vcpu_pmu_restore_guest(struct kvm_vcpu *vcpu) {}
 static inline void kvm_vcpu_pmu_restore_host(struct kvm_vcpu *vcpu) {}
+static inline u8 kvm_arm_pmu_get_pmuver_limit(void)
+{
+	return 0;
+}
 
 #endif
 
-- 
2.34.1


  parent reply	other threads:[~2022-11-13 16:46 UTC|newest]

Thread overview: 74+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-11-13 16:38 [PATCH v4 00/16] KVM: arm64: PMU: Fixing chained events, and PMUv3p5 support Marc Zyngier
2022-11-13 16:38 ` Marc Zyngier
2022-11-13 16:38 ` [PATCH v4 01/16] arm64: Add ID_DFR0_EL1.PerfMon values for PMUv3p7 and IMP_DEF Marc Zyngier
2022-11-13 16:38   ` Marc Zyngier
2022-11-13 16:38 ` [PATCH v4 02/16] KVM: arm64: PMU: Align chained counter implementation with architecture pseudocode Marc Zyngier
2022-11-13 16:38   ` Marc Zyngier
2022-11-16  7:15   ` Reiji Watanabe
2022-11-16  7:15     ` Reiji Watanabe
2022-11-13 16:38 ` [PATCH v4 03/16] KVM: arm64: PMU: Always advertise the CHAIN event Marc Zyngier
2022-11-13 16:38   ` Marc Zyngier
2022-11-13 16:38 ` [PATCH v4 04/16] KVM: arm64: PMU: Distinguish between 64bit counter and 64bit overflow Marc Zyngier
2022-11-13 16:38   ` Marc Zyngier
2022-12-01 16:47   ` Ricardo Koller
2022-12-01 16:47     ` Ricardo Koller
2022-12-01 16:51     ` Ricardo Koller
2022-12-01 16:51       ` Ricardo Koller
2022-12-05 12:05       ` Marc Zyngier
2022-12-05 12:05         ` Marc Zyngier
2022-12-05 18:50         ` Ricardo Koller
2022-12-05 18:50           ` Ricardo Koller
2022-11-13 16:38 ` [PATCH v4 05/16] KVM: arm64: PMU: Narrow the overflow checking when required Marc Zyngier
2022-11-13 16:38   ` Marc Zyngier
2022-11-17  6:50   ` Reiji Watanabe
2022-11-17  6:50     ` Reiji Watanabe
2022-11-13 16:38 ` [PATCH v4 06/16] KVM: arm64: PMU: Only narrow counters that are not 64bit wide Marc Zyngier
2022-11-13 16:38   ` Marc Zyngier
2022-11-17  6:54   ` Reiji Watanabe
2022-11-17  6:54     ` Reiji Watanabe
2022-11-13 16:38 ` [PATCH v4 07/16] KVM: arm64: PMU: Add counter_index_to_*reg() helpers Marc Zyngier
2022-11-13 16:38   ` Marc Zyngier
2022-11-18  6:16   ` Reiji Watanabe
2022-11-18  6:16     ` Reiji Watanabe
2022-11-13 16:38 ` [PATCH v4 08/16] KVM: arm64: PMU: Simplify setting a counter to a specific value Marc Zyngier
2022-11-13 16:38   ` Marc Zyngier
2022-11-13 16:38 ` [PATCH v4 09/16] KVM: arm64: PMU: Do not let AArch32 change the counters' top 32 bits Marc Zyngier
2022-11-13 16:38   ` Marc Zyngier
2022-11-18  7:45   ` Reiji Watanabe
2022-11-18  7:45     ` Reiji Watanabe
2022-11-19 12:32     ` Marc Zyngier
2022-11-19 12:32       ` Marc Zyngier
2022-11-13 16:38 ` Marc Zyngier [this message]
2022-11-13 16:38   ` [PATCH v4 10/16] KVM: arm64: PMU: Move the ID_AA64DFR0_EL1.PMUver limit to VM creation Marc Zyngier
2022-11-13 16:38 ` [PATCH v4 11/16] KVM: arm64: PMU: Allow ID_AA64DFR0_EL1.PMUver to be set from userspace Marc Zyngier
2022-11-13 16:38   ` Marc Zyngier
2022-11-19  5:31   ` Reiji Watanabe
2022-11-19  5:31     ` Reiji Watanabe
2022-11-13 16:38 ` [PATCH v4 12/16] KVM: arm64: PMU: Allow ID_DFR0_EL1.PerfMon " Marc Zyngier
2022-11-13 16:38   ` Marc Zyngier
2022-11-19  5:52   ` Reiji Watanabe
2022-11-19  5:52     ` Reiji Watanabe
2022-11-19 12:54     ` Marc Zyngier
2022-11-19 12:54       ` Marc Zyngier
2022-11-13 16:38 ` [PATCH v4 13/16] KVM: arm64: PMU: Implement PMUv3p5 long counter support Marc Zyngier
2022-11-13 16:38   ` Marc Zyngier
2022-11-23  5:58   ` Reiji Watanabe
2022-11-23  5:58     ` Reiji Watanabe
2022-11-23 11:11     ` Marc Zyngier
2022-11-23 11:11       ` Marc Zyngier
2022-11-23 17:11       ` Reiji Watanabe
2022-11-23 17:11         ` Reiji Watanabe
2022-11-24 10:17         ` Marc Zyngier
2022-11-24 10:17           ` Marc Zyngier
2022-11-29  3:03           ` Reiji Watanabe
2022-11-29  3:03             ` Reiji Watanabe
2022-11-13 16:38 ` [PATCH v4 14/16] KVM: arm64: PMU: Allow PMUv3p5 to be exposed to the guest Marc Zyngier
2022-11-13 16:38   ` Marc Zyngier
2022-11-23  6:07   ` Reiji Watanabe
2022-11-23  6:07     ` Reiji Watanabe
2022-11-13 16:38 ` [PATCH v4 15/16] KVM: arm64: PMU: Simplify vcpu computation on perf overflow notification Marc Zyngier
2022-11-13 16:38   ` Marc Zyngier
2022-11-23  6:27   ` Reiji Watanabe
2022-11-23  6:27     ` Reiji Watanabe
2022-11-13 16:38 ` [PATCH v4 16/16] KVM: arm64: PMU: Make kvm_pmc the main data structure Marc Zyngier
2022-11-13 16:38   ` Marc Zyngier

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20221113163832.3154370-11-maz@kernel.org \
    --to=maz@kernel.org \
    --cc=kvm@vger.kernel.org \
    --cc=kvmarm@lists.cs.columbia.edu \
    --cc=kvmarm@lists.linux.dev \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox