Re: Re: [LARTC] How to measure bandwidth?

Re: Re: [LARTC] How to measure bandwidth?

[Chuanbo Xu]

Hi£¬

This is a monitor tool, but measure.
I want to measure max bandwidth, when I limit it with tc.


regards,

            Chuanbo Xu
            iproute2@btamail.net.cn

You writes£º
>On Fri, Jun 15, 2001 at 01:48:17PM +0800, Chuanbo Xu wrote:
>
>	I use iptraf, is a very handy tool to meter bandwith
>
>	http://cebu.mozcom.com/riker/iptraf
>
>
>	Good luck!
>
>
>> Hi£¬
>> 
>> I run tc to limit bandwidth. Howerver, how to measure bandwidth?
>> 
>> regards,
>> 
>>             Chuanbo Xu
>>             iproute2@btamail.net.cn
>> 
>> 
>> _______________________________________________
>> LARTC mailing list / LARTC@mailman.ds9a.nl
>> http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
>
>-- 
>Javier Miguel Rodríguez.	(GUFO)                                              
>Miembro del grupo Linux de la Facultad de Informática de Sevilla     -o)
>http://talika.fie.us.es/linux                                        /\\
>Linux Registered User #145051.                                      _\_V
>
>_______________________________________________
>LARTC mailing list / LARTC@mailman.ds9a.nl
>http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/




_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/

Re: Re: [LARTC] How to measure bandwidth?

[Chuanbo Xu]

Hi Stef Coene£¬

error:
'Illegal division by zero at ./monitor.pl line 115'

regards,

            Chuanbo Xu
            iproute2@btamail.net.cn

You writes£º
>Chuanbo Xu wrote:
>> 
>> Hi£¬
>> 
>> I run tc to limit bandwidth. Howerver, how to measure bandwidth?
>> 
>> regards,
>> 
>>             Chuanbo Xu
>>             iproute2@btamail.net.cn
>> 
>> _______________________________________________
>> LARTC mailing list / LARTC@mailman.ds9a.nl
>> http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
>Again, take a look at my website.  I use firewall rules th count the
>bytes and to calculate the bandwidth.  I make a script to do this :
>monitor.pl
>
>
>-- 
>
>Stef
>
>More QOS info : http://users.belgacom.net/staf/




_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/

Re: Re: [LARTC] How to measure bandwidth?

[Chuanbo Xu]

Hi Stef Coene£¬

I execute time_ms.exe and get 2 numbers. 
Put it and monitor.pl in the same directory.
Execute monitor.pl, and get the same error.

regards,

            Chuanbo Xu
            iproute2@btamail.net.cn

You writes£º
>Chuanbo Xu wrote:
>> 
>> Hi Stef Coene£¬
>> 
>> error:
>> 'Illegal division by zero at ./monitor.pl line 115'
>You need to download time_ms.exe from the same site, make it executable,
>try to execute it (it should give you 2 numbers : time in seconds and
>time in miliseconds), put it somewhere in your path and try again.
>
>
>Stef
>
>> 
>> regards,
>> 
>>             Chuanbo Xu
>>             iproute2@btamail.net.cn
>> 
>> You writes£º
>> >Chuanbo Xu wrote:
>> >>
>> >> Hi£¬
>> >>
>> >> I run tc to limit bandwidth. Howerver, how to measure bandwidth?
>> >>
>> >> regards,
>> >>
>> >>             Chuanbo Xu
>> >>             iproute2@btamail.net.cn
>> >>
>> >> _______________________________________________
>> >> LARTC mailing list / LARTC@mailman.ds9a.nl
>> >> http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
>> >Again, take a look at my website.  I use firewall rules th count the
>> >bytes and to calculate the bandwidth.  I make a script to do this :
>> >monitor.pl
>> >
>> >
>> >--
>> >
>> >Stef
>> >
>> >More QOS info : http://users.belgacom.net/staf/
>> 
>> _______________________________________________
>> LARTC mailing list / LARTC@mailman.ds9a.nl
>> http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
>
>-- 
>
>Stef
>
>More QOS info : http://users.belgacom.net/staf/




_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/

Re: Re: [LARTC] How to measure bandwidth?

[Chuanbo Xu]

Hi Stef Coene£¬

I put it in /root, and execute monitor.pl as root.

regards,

            Chuanbo Xu
            iproute2@btamail.net.cn

You writes£º
>Chuanbo Xu wrote:
>> 
>> Hi Stef Coene£¬
>> 
>> I execute time_ms.exe and get 2 numbers.
>> Put it and monitor.pl in the same directory.
>> Execute monitor.pl, and get the same error.
>
>> >You need to download time_ms.exe from the same site, make it executable,
>> >try to execute it (it should give you 2 numbers : time in seconds and
>> >time in miliseconds), put it somewhere in your path and try again.
>                         ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>repeat : put it somewhere in your path.  If you execute "echo $PATH" as
>root in a terminal, you get the path where monitor.pl will search for
>the program.  OR adapt monitor.pl and change time_ms.exe in
>../time_ms.exe.
>
>
>-- 
>
>Stef
>
>More QOS info : http://users.belgacom.net/staf/


_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/