* Re: Re: [LARTC] How to measure bandwidth?
@ 2001-06-16 15:21 Chuanbo Xu
2001-06-17 11:30 ` Chuanbo Xu
` (2 more replies)
0 siblings, 3 replies; 4+ messages in thread
From: Chuanbo Xu @ 2001-06-16 15:21 UTC (permalink / raw)
To: lartc
Hi£¬
This is a monitor tool, but measure.
I want to measure max bandwidth, when I limit it with tc.
regards,
Chuanbo Xu
iproute2@btamail.net.cn
You writes£º
>On Fri, Jun 15, 2001 at 01:48:17PM +0800, Chuanbo Xu wrote:
>
> I use iptraf, is a very handy tool to meter bandwith
>
> http://cebu.mozcom.com/riker/iptraf
>
>
> Good luck!
>
>
>> Hi£¬
>>
>> I run tc to limit bandwidth. Howerver, how to measure bandwidth?
>>
>> regards,
>>
>> Chuanbo Xu
>> iproute2@btamail.net.cn
>>
>>
>> _______________________________________________
>> LARTC mailing list / LARTC@mailman.ds9a.nl
>> http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
>
>--
>Javier Miguel Rodríguez. (GUFO)
>Miembro del grupo Linux de la Facultad de Informática de Sevilla -o)
>http://talika.fie.us.es/linux /\\
>Linux Registered User #145051. _\_V
>
>_______________________________________________
>LARTC mailing list / LARTC@mailman.ds9a.nl
>http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: Re: [LARTC] How to measure bandwidth?
2001-06-16 15:21 Re: [LARTC] How to measure bandwidth? Chuanbo Xu
@ 2001-06-17 11:30 ` Chuanbo Xu
2001-06-18 8:33 ` Chuanbo Xu
2001-06-18 14:57 ` Chuanbo Xu
2 siblings, 0 replies; 4+ messages in thread
From: Chuanbo Xu @ 2001-06-17 11:30 UTC (permalink / raw)
To: lartc
Hi Stef Coene£¬
error:
'Illegal division by zero at ./monitor.pl line 115'
regards,
Chuanbo Xu
iproute2@btamail.net.cn
You writes£º
>Chuanbo Xu wrote:
>>
>> Hi£¬
>>
>> I run tc to limit bandwidth. Howerver, how to measure bandwidth?
>>
>> regards,
>>
>> Chuanbo Xu
>> iproute2@btamail.net.cn
>>
>> _______________________________________________
>> LARTC mailing list / LARTC@mailman.ds9a.nl
>> http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
>Again, take a look at my website. I use firewall rules th count the
>bytes and to calculate the bandwidth. I make a script to do this :
>monitor.pl
>
>
>--
>
>Stef
>
>More QOS info : http://users.belgacom.net/staf/
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: Re: [LARTC] How to measure bandwidth?
2001-06-16 15:21 Re: [LARTC] How to measure bandwidth? Chuanbo Xu
2001-06-17 11:30 ` Chuanbo Xu
@ 2001-06-18 8:33 ` Chuanbo Xu
2001-06-18 14:57 ` Chuanbo Xu
2 siblings, 0 replies; 4+ messages in thread
From: Chuanbo Xu @ 2001-06-18 8:33 UTC (permalink / raw)
To: lartc
Hi Stef Coene£¬
I execute time_ms.exe and get 2 numbers.
Put it and monitor.pl in the same directory.
Execute monitor.pl, and get the same error.
regards,
Chuanbo Xu
iproute2@btamail.net.cn
You writes£º
>Chuanbo Xu wrote:
>>
>> Hi Stef Coene£¬
>>
>> error:
>> 'Illegal division by zero at ./monitor.pl line 115'
>You need to download time_ms.exe from the same site, make it executable,
>try to execute it (it should give you 2 numbers : time in seconds and
>time in miliseconds), put it somewhere in your path and try again.
>
>
>Stef
>
>>
>> regards,
>>
>> Chuanbo Xu
>> iproute2@btamail.net.cn
>>
>> You writes£º
>> >Chuanbo Xu wrote:
>> >>
>> >> Hi£¬
>> >>
>> >> I run tc to limit bandwidth. Howerver, how to measure bandwidth?
>> >>
>> >> regards,
>> >>
>> >> Chuanbo Xu
>> >> iproute2@btamail.net.cn
>> >>
>> >> _______________________________________________
>> >> LARTC mailing list / LARTC@mailman.ds9a.nl
>> >> http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
>> >Again, take a look at my website. I use firewall rules th count the
>> >bytes and to calculate the bandwidth. I make a script to do this :
>> >monitor.pl
>> >
>> >
>> >--
>> >
>> >Stef
>> >
>> >More QOS info : http://users.belgacom.net/staf/
>>
>> _______________________________________________
>> LARTC mailing list / LARTC@mailman.ds9a.nl
>> http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
>
>--
>
>Stef
>
>More QOS info : http://users.belgacom.net/staf/
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: Re: [LARTC] How to measure bandwidth?
2001-06-16 15:21 Re: [LARTC] How to measure bandwidth? Chuanbo Xu
2001-06-17 11:30 ` Chuanbo Xu
2001-06-18 8:33 ` Chuanbo Xu
@ 2001-06-18 14:57 ` Chuanbo Xu
2 siblings, 0 replies; 4+ messages in thread
From: Chuanbo Xu @ 2001-06-18 14:57 UTC (permalink / raw)
To: lartc
Hi Stef Coene£¬
I put it in /root, and execute monitor.pl as root.
regards,
Chuanbo Xu
iproute2@btamail.net.cn
You writes£º
>Chuanbo Xu wrote:
>>
>> Hi Stef Coene£¬
>>
>> I execute time_ms.exe and get 2 numbers.
>> Put it and monitor.pl in the same directory.
>> Execute monitor.pl, and get the same error.
>
>> >You need to download time_ms.exe from the same site, make it executable,
>> >try to execute it (it should give you 2 numbers : time in seconds and
>> >time in miliseconds), put it somewhere in your path and try again.
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>repeat : put it somewhere in your path. If you execute "echo $PATH" as
>root in a terminal, you get the path where monitor.pl will search for
>the program. OR adapt monitor.pl and change time_ms.exe in
>../time_ms.exe.
>
>
>--
>
>Stef
>
>More QOS info : http://users.belgacom.net/staf/
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2001-06-18 14:57 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2001-06-16 15:21 Re: [LARTC] How to measure bandwidth? Chuanbo Xu
2001-06-17 11:30 ` Chuanbo Xu
2001-06-18 8:33 ` Chuanbo Xu
2001-06-18 14:57 ` Chuanbo Xu
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox