* Hauppauge WinTV-HVR-1120 on Unbuntu 10.04
@ 2010-10-11 9:41 fabio tirapelle
2010-10-12 1:00 ` Zhang Rui
2010-10-12 20:27 ` Bjorn Helgaas
0 siblings, 2 replies; 3+ messages in thread
From: fabio tirapelle @ 2010-10-11 9:41 UTC (permalink / raw)
To: linux-acpi
Hi
After upgrading from Ubuntu 9.10 to Ubuntu 10.04 my Hauppauge WinTV-HVR-1120
(sometimes) doesn't work correctly.
I get random the following errors:
[ 53.216153] DVB: registering new adapter (saa7133[0])
[ 53.216156] DVB: registering adapter 2 frontend 0 (NXP TDA10048HN DVB-T)...
[ 53.840013] tda10048_firmware_upload: waiting for firmware upload
(dvb-fe-tda10048-1.0.fw)...
[ 53.840019] saa7134 0000:01:06.0: firmware: requesting dvb-fe-tda10048-1.0.fw
[ 53.880505] tda10048_firmware_upload: firmware read 24878 bytes.
[ 53.880509] tda10048_firmware_upload: firmware uploading
[ 58.280136] tda10048_firmware_upload: firmware uploaded
[ 59.024537] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer
returned: -5
[ 59.024541] tda18271c2_rf_tracking_filters_correction: error -5 on line 264
[ 59.420153] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer
returned: -5
[ 59.420157] tda18271_toggle_output: error -5 on line 47
[ 91.004019] Clocksource tsc unstable (delta = -295012684 ns)
[ 256.293639] eth0: link up.
[ 256.294750] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 263.523498] eth0: link down.
[ 265.258740] eth0: link up.
[ 266.460026] eth0: no IPv6 routers present
[ 9869.636167] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer
returned: -5
[ 9869.636178] tda18271_init: error -5 on line 826
[ 9872.636220] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer
returned: -5
[ 9872.636232] tda18271_toggle_output: error -5 on line 47
[ 9998.240167] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer
returned: -5
[ 9998.240178] tda18271_init: error -5 on line 826
[10001.240179] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer
returned: -5
[10001.240190] tda18271_toggle_output: error -5 on line 47
Any ideas?
Thanks
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: Hauppauge WinTV-HVR-1120 on Unbuntu 10.04
2010-10-11 9:41 Hauppauge WinTV-HVR-1120 on Unbuntu 10.04 fabio tirapelle
@ 2010-10-12 1:00 ` Zhang Rui
2010-10-12 20:27 ` Bjorn Helgaas
1 sibling, 0 replies; 3+ messages in thread
From: Zhang Rui @ 2010-10-12 1:00 UTC (permalink / raw)
To: fabio tirapelle; +Cc: linux-acpi@vger.kernel.org
On Mon, 2010-10-11 at 17:41 +0800, fabio tirapelle wrote:
> Hi
>
> After upgrading from Ubuntu 9.10 to Ubuntu 10.04 my Hauppauge WinTV-HVR-1120
> (sometimes) doesn't work correctly.
Well, this is not an ACPI problem, so I'm not sure why you report it
here.
thanks,
rui
> I get random the following errors:
>
> [ 53.216153] DVB: registering new adapter (saa7133[0])
> [ 53.216156] DVB: registering adapter 2 frontend 0 (NXP TDA10048HN DVB-T)...
> [ 53.840013] tda10048_firmware_upload: waiting for firmware upload
> (dvb-fe-tda10048-1.0.fw)...
> [ 53.840019] saa7134 0000:01:06.0: firmware: requesting dvb-fe-tda10048-1.0.fw
> [ 53.880505] tda10048_firmware_upload: firmware read 24878 bytes.
> [ 53.880509] tda10048_firmware_upload: firmware uploading
> [ 58.280136] tda10048_firmware_upload: firmware uploaded
> [ 59.024537] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer
> returned: -5
> [ 59.024541] tda18271c2_rf_tracking_filters_correction: error -5 on line 264
> [ 59.420153] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer
> returned: -5
> [ 59.420157] tda18271_toggle_output: error -5 on line 47
> [ 91.004019] Clocksource tsc unstable (delta = -295012684 ns)
> [ 256.293639] eth0: link up.
> [ 256.294750] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
> [ 263.523498] eth0: link down.
> [ 265.258740] eth0: link up.
> [ 266.460026] eth0: no IPv6 routers present
> [ 9869.636167] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer
> returned: -5
> [ 9869.636178] tda18271_init: error -5 on line 826
> [ 9872.636220] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer
> returned: -5
> [ 9872.636232] tda18271_toggle_output: error -5 on line 47
> [ 9998.240167] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer
> returned: -5
> [ 9998.240178] tda18271_init: error -5 on line 826
> [10001.240179] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer
> returned: -5
> [10001.240190] tda18271_toggle_output: error -5 on line 47
>
>
>
> Any ideas?
> Thanks
>
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: Hauppauge WinTV-HVR-1120 on Unbuntu 10.04
2010-10-11 9:41 Hauppauge WinTV-HVR-1120 on Unbuntu 10.04 fabio tirapelle
2010-10-12 1:00 ` Zhang Rui
@ 2010-10-12 20:27 ` Bjorn Helgaas
1 sibling, 0 replies; 3+ messages in thread
From: Bjorn Helgaas @ 2010-10-12 20:27 UTC (permalink / raw)
To: fabio tirapelle; +Cc: linux-acpi
On Monday, October 11, 2010 03:41:17 am fabio tirapelle wrote:
> Hi
>
> After upgrading from Ubuntu 9.10 to Ubuntu 10.04 my Hauppauge WinTV-HVR-1120
> (sometimes) doesn't work correctly.
> I get random the following errors:
>
> [ 53.216153] DVB: registering new adapter (saa7133[0])
> [ 53.216156] DVB: registering adapter 2 frontend 0 (NXP TDA10048HN DVB-T)...
> [ 53.840013] tda10048_firmware_upload: waiting for firmware upload
> (dvb-fe-tda10048-1.0.fw)...
> [ 53.840019] saa7134 0000:01:06.0: firmware: requesting dvb-fe-tda10048-1.0.fw
> [ 53.880505] tda10048_firmware_upload: firmware read 24878 bytes.
> [ 53.880509] tda10048_firmware_upload: firmware uploading
> [ 58.280136] tda10048_firmware_upload: firmware uploaded
> [ 59.024537] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer
> returned: -5
Can you collect the complete dmesg log, please? If you still have
the 9.10 kernel and can collect a log from that for comparison, that
would be great, too.
I don't see an indication that it's ACPI-related, so maybe
linux-kernel@vger.kernel.org would be a better place. Please copy
me, too :-)
Bjorn
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2010-10-12 20:28 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-10-11 9:41 Hauppauge WinTV-HVR-1120 on Unbuntu 10.04 fabio tirapelle
2010-10-12 1:00 ` Zhang Rui
2010-10-12 20:27 ` Bjorn Helgaas
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox