* [PATCH V2 0/2] irqchip: Support to set irq type for ACPI path @ 2022-10-08 2:51 Jianmin Lv 2022-10-08 2:51 ` [PATCH V2 1/2] irqchip/loongson-pch-pic: " Jianmin Lv 2022-10-08 2:51 ` [PATCH V2 2/2] irqchip/loongson-liointc: " Jianmin Lv 0 siblings, 2 replies; 7+ messages in thread From: Jianmin Lv @ 2022-10-08 2:51 UTC (permalink / raw) To: Thomas Gleixner, Marc Zyngier Cc: linux-kernel, loongarch, Jiaxun Yang, Huacai Chen, Bjorn Helgaas, Len Brown, rafael, linux-pci, linux-acpi For ACPI path of pch-pic and liointc driver, setting irq type is not supported yet, so the patch series add code to implement it. V1 -> V2 - Change comment information and fix a bug for DT path in patch[1]. Jianmin Lv (2): irqchip/loongson-pch-pic: Support to set irq type for ACPI path irqchip/loongson-liointc: Support to set irq type for ACPI path drivers/acpi/pci_irq.c | 6 ++++-- drivers/irqchip/irq-loongson-liointc.c | 7 ++++++- drivers/irqchip/irq-loongson-pch-pic.c | 9 ++++++++- 3 files changed, 18 insertions(+), 4 deletions(-) -- 2.31.1 ^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH V2 1/2] irqchip/loongson-pch-pic: Support to set irq type for ACPI path 2022-10-08 2:51 [PATCH V2 0/2] irqchip: Support to set irq type for ACPI path Jianmin Lv @ 2022-10-08 2:51 ` Jianmin Lv 2022-10-09 1:08 ` Marc Zyngier 2022-10-08 2:51 ` [PATCH V2 2/2] irqchip/loongson-liointc: " Jianmin Lv 1 sibling, 1 reply; 7+ messages in thread From: Jianmin Lv @ 2022-10-08 2:51 UTC (permalink / raw) To: Thomas Gleixner, Marc Zyngier Cc: linux-kernel, loongarch, Jiaxun Yang, Huacai Chen, Bjorn Helgaas, Len Brown, rafael, linux-pci, linux-acpi For ACPI path, the translate callback used IRQ_TYPE_NONE and ignored the irq type in fwspec->param[1]. For supporting to set type for irqs of the irqdomain, fwspec->param[1] should be used to get irq type. On Loongson platform, the irq trigger type of PCI devices is high level, so high level triggered type is inputed to acpi_register_gsi when create irq mapping for PCI devices. Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn> --- drivers/acpi/pci_irq.c | 6 ++++-- drivers/irqchip/irq-loongson-pch-pic.c | 9 ++++++++- 2 files changed, 12 insertions(+), 3 deletions(-) diff --git a/drivers/acpi/pci_irq.c b/drivers/acpi/pci_irq.c index 08e15774fb9f..ff30ceca2203 100644 --- a/drivers/acpi/pci_irq.c +++ b/drivers/acpi/pci_irq.c @@ -387,13 +387,15 @@ int acpi_pci_irq_enable(struct pci_dev *dev) u8 pin; int triggering = ACPI_LEVEL_SENSITIVE; /* - * On ARM systems with the GIC interrupt model, level interrupts + * On ARM systems with the GIC interrupt model, or LoongArch + * systems with the LPIC interrupt model, level interrupts * are always polarity high by specification; PCI legacy * IRQs lines are inverted before reaching the interrupt * controller and must therefore be considered active high * as default. */ - int polarity = acpi_irq_model == ACPI_IRQ_MODEL_GIC ? + int polarity = acpi_irq_model == ACPI_IRQ_MODEL_GIC || + acpi_irq_model == ACPI_IRQ_MODEL_LPIC ? ACPI_ACTIVE_HIGH : ACPI_ACTIVE_LOW; char *link = NULL; char link_desc[16]; diff --git a/drivers/irqchip/irq-loongson-pch-pic.c b/drivers/irqchip/irq-loongson-pch-pic.c index c01b9c257005..5576c97fec85 100644 --- a/drivers/irqchip/irq-loongson-pch-pic.c +++ b/drivers/irqchip/irq-loongson-pch-pic.c @@ -159,11 +159,18 @@ static int pch_pic_domain_translate(struct irq_domain *d, return -EINVAL; if (of_node) { + if (fwspec->param_count < 2) + return -EINVAL; + *hwirq = fwspec->param[0] + priv->ht_vec_base; *type = fwspec->param[1] & IRQ_TYPE_SENSE_MASK; } else { *hwirq = fwspec->param[0] - priv->gsi_base; - *type = IRQ_TYPE_NONE; + + if (fwspec->param_count > 1) + *type = fwspec->param[1] & IRQ_TYPE_SENSE_MASK; + else + *type = IRQ_TYPE_NONE; } return 0; -- 2.31.1 ^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [PATCH V2 1/2] irqchip/loongson-pch-pic: Support to set irq type for ACPI path 2022-10-08 2:51 ` [PATCH V2 1/2] irqchip/loongson-pch-pic: " Jianmin Lv @ 2022-10-09 1:08 ` Marc Zyngier 2022-10-09 2:26 ` Jianmin Lv 0 siblings, 1 reply; 7+ messages in thread From: Marc Zyngier @ 2022-10-09 1:08 UTC (permalink / raw) To: Jianmin Lv Cc: Thomas Gleixner, linux-kernel, loongarch, Jiaxun Yang, Huacai Chen, Bjorn Helgaas, Len Brown, rafael, linux-pci, linux-acpi On Sat, 08 Oct 2022 03:51:49 +0100, Jianmin Lv <lvjianmin@loongson.cn> wrote: > > For ACPI path, the translate callback used IRQ_TYPE_NONE and ignored > the irq type in fwspec->param[1]. For supporting to set type for > irqs of the irqdomain, fwspec->param[1] should be used to get irq > type. > > On Loongson platform, the irq trigger type of PCI devices is > high level, so high level triggered type is inputed to acpi_register_gsi > when create irq mapping for PCI devices. > > Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn> > --- > drivers/acpi/pci_irq.c | 6 ++++-- > drivers/irqchip/irq-loongson-pch-pic.c | 9 ++++++++- > 2 files changed, 12 insertions(+), 3 deletions(-) > > diff --git a/drivers/acpi/pci_irq.c b/drivers/acpi/pci_irq.c > index 08e15774fb9f..ff30ceca2203 100644 > --- a/drivers/acpi/pci_irq.c > +++ b/drivers/acpi/pci_irq.c > @@ -387,13 +387,15 @@ int acpi_pci_irq_enable(struct pci_dev *dev) > u8 pin; > int triggering = ACPI_LEVEL_SENSITIVE; > /* > - * On ARM systems with the GIC interrupt model, level interrupts > + * On ARM systems with the GIC interrupt model, or LoongArch > + * systems with the LPIC interrupt model, level interrupts > * are always polarity high by specification; PCI legacy > * IRQs lines are inverted before reaching the interrupt > * controller and must therefore be considered active high > * as default. > */ > - int polarity = acpi_irq_model == ACPI_IRQ_MODEL_GIC ? > + int polarity = acpi_irq_model == ACPI_IRQ_MODEL_GIC || > + acpi_irq_model == ACPI_IRQ_MODEL_LPIC ? > ACPI_ACTIVE_HIGH : ACPI_ACTIVE_LOW; > char *link = NULL; > char link_desc[16]; This is one patch adding support for the LPIC model. > diff --git a/drivers/irqchip/irq-loongson-pch-pic.c b/drivers/irqchip/irq-loongson-pch-pic.c > index c01b9c257005..5576c97fec85 100644 > --- a/drivers/irqchip/irq-loongson-pch-pic.c > +++ b/drivers/irqchip/irq-loongson-pch-pic.c > @@ -159,11 +159,18 @@ static int pch_pic_domain_translate(struct irq_domain *d, > return -EINVAL; > > if (of_node) { > + if (fwspec->param_count < 2) > + return -EINVAL; > + This is another patch fixing a regression introduced by bcdd75c596c8. > *hwirq = fwspec->param[0] + priv->ht_vec_base; > *type = fwspec->param[1] & IRQ_TYPE_SENSE_MASK; > } else { > *hwirq = fwspec->param[0] - priv->gsi_base; > - *type = IRQ_TYPE_NONE; > + > + if (fwspec->param_count > 1) > + *type = fwspec->param[1] & IRQ_TYPE_SENSE_MASK; > + else > + *type = IRQ_TYPE_NONE; This is yet another patch fixing PCI INTx handling. You can also move the check against 'param_count < 1' in this block. > } > > return 0; M. -- Without deviation from the norm, progress is not possible. ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH V2 1/2] irqchip/loongson-pch-pic: Support to set irq type for ACPI path 2022-10-09 1:08 ` Marc Zyngier @ 2022-10-09 2:26 ` Jianmin Lv 2022-10-09 2:31 ` Marc Zyngier 0 siblings, 1 reply; 7+ messages in thread From: Jianmin Lv @ 2022-10-09 2:26 UTC (permalink / raw) To: Marc Zyngier Cc: Thomas Gleixner, linux-kernel, loongarch, Jiaxun Yang, Huacai Chen, Bjorn Helgaas, Len Brown, rafael, linux-pci, linux-acpi Ok, thanks, I'll separate this patch, so we have to make the patch fixing PCI INTx handling to be after the patch supporting for the LPIC model to avoid kernel hang, yes? On 2022/10/9 上午9:08, Marc Zyngier wrote: > On Sat, 08 Oct 2022 03:51:49 +0100, > Jianmin Lv <lvjianmin@loongson.cn> wrote: >> >> For ACPI path, the translate callback used IRQ_TYPE_NONE and ignored >> the irq type in fwspec->param[1]. For supporting to set type for >> irqs of the irqdomain, fwspec->param[1] should be used to get irq >> type. >> >> On Loongson platform, the irq trigger type of PCI devices is >> high level, so high level triggered type is inputed to acpi_register_gsi >> when create irq mapping for PCI devices. >> >> Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn> >> --- >> drivers/acpi/pci_irq.c | 6 ++++-- >> drivers/irqchip/irq-loongson-pch-pic.c | 9 ++++++++- >> 2 files changed, 12 insertions(+), 3 deletions(-) >> >> diff --git a/drivers/acpi/pci_irq.c b/drivers/acpi/pci_irq.c >> index 08e15774fb9f..ff30ceca2203 100644 >> --- a/drivers/acpi/pci_irq.c >> +++ b/drivers/acpi/pci_irq.c >> @@ -387,13 +387,15 @@ int acpi_pci_irq_enable(struct pci_dev *dev) >> u8 pin; >> int triggering = ACPI_LEVEL_SENSITIVE; >> /* >> - * On ARM systems with the GIC interrupt model, level interrupts >> + * On ARM systems with the GIC interrupt model, or LoongArch >> + * systems with the LPIC interrupt model, level interrupts >> * are always polarity high by specification; PCI legacy >> * IRQs lines are inverted before reaching the interrupt >> * controller and must therefore be considered active high >> * as default. >> */ >> - int polarity = acpi_irq_model == ACPI_IRQ_MODEL_GIC ? >> + int polarity = acpi_irq_model == ACPI_IRQ_MODEL_GIC || >> + acpi_irq_model == ACPI_IRQ_MODEL_LPIC ? >> ACPI_ACTIVE_HIGH : ACPI_ACTIVE_LOW; >> char *link = NULL; >> char link_desc[16]; > > This is one patch adding support for the LPIC model. > >> diff --git a/drivers/irqchip/irq-loongson-pch-pic.c b/drivers/irqchip/irq-loongson-pch-pic.c >> index c01b9c257005..5576c97fec85 100644 >> --- a/drivers/irqchip/irq-loongson-pch-pic.c >> +++ b/drivers/irqchip/irq-loongson-pch-pic.c >> @@ -159,11 +159,18 @@ static int pch_pic_domain_translate(struct irq_domain *d, >> return -EINVAL; >> >> if (of_node) { >> + if (fwspec->param_count < 2) >> + return -EINVAL; >> + > > This is another patch fixing a regression introduced by bcdd75c596c8. > >> *hwirq = fwspec->param[0] + priv->ht_vec_base; >> *type = fwspec->param[1] & IRQ_TYPE_SENSE_MASK; >> } else { >> *hwirq = fwspec->param[0] - priv->gsi_base; >> - *type = IRQ_TYPE_NONE; >> + >> + if (fwspec->param_count > 1) >> + *type = fwspec->param[1] & IRQ_TYPE_SENSE_MASK; >> + else >> + *type = IRQ_TYPE_NONE; > > This is yet another patch fixing PCI INTx handling. You can also move > the check against 'param_count < 1' in this block. > >> } >> >> return 0; > > M. > ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH V2 1/2] irqchip/loongson-pch-pic: Support to set irq type for ACPI path 2022-10-09 2:26 ` Jianmin Lv @ 2022-10-09 2:31 ` Marc Zyngier 2022-10-09 2:36 ` Jianmin Lv 0 siblings, 1 reply; 7+ messages in thread From: Marc Zyngier @ 2022-10-09 2:31 UTC (permalink / raw) To: Jianmin Lv Cc: Thomas Gleixner, linux-kernel, loongarch, Jiaxun Yang, Huacai Chen, Bjorn Helgaas, Len Brown, rafael, linux-pci, linux-acpi On Sun, 09 Oct 2022 03:26:21 +0100, Jianmin Lv <lvjianmin@loongson.cn> wrote: > > Ok, thanks, I'll separate this patch, so we have to make the patch > fixing PCI INTx handling to be after the patch supporting for the LPIC > model to avoid kernel hang, yes? Pick whatever order fits your system, really. But don't mix generic ACPI changes and irqchip code in the same patch, that's just wrong. Thanks, M. -- Without deviation from the norm, progress is not possible. ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH V2 1/2] irqchip/loongson-pch-pic: Support to set irq type for ACPI path 2022-10-09 2:31 ` Marc Zyngier @ 2022-10-09 2:36 ` Jianmin Lv 0 siblings, 0 replies; 7+ messages in thread From: Jianmin Lv @ 2022-10-09 2:36 UTC (permalink / raw) To: Marc Zyngier Cc: Thomas Gleixner, linux-kernel, loongarch, Jiaxun Yang, Huacai Chen, Bjorn Helgaas, Len Brown, rafael, linux-pci, linux-acpi On 2022/10/9 上午10:31, Marc Zyngier wrote: > On Sun, 09 Oct 2022 03:26:21 +0100, > Jianmin Lv <lvjianmin@loongson.cn> wrote: >> >> Ok, thanks, I'll separate this patch, so we have to make the patch >> fixing PCI INTx handling to be after the patch supporting for the LPIC >> model to avoid kernel hang, yes? > > Pick whatever order fits your system, really. But don't mix generic > ACPI changes and irqchip code in the same patch, that's just wrong. > Ok, thanks, got it. > Thanks, > > M. > ^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH V2 2/2] irqchip/loongson-liointc: Support to set irq type for ACPI path 2022-10-08 2:51 [PATCH V2 0/2] irqchip: Support to set irq type for ACPI path Jianmin Lv 2022-10-08 2:51 ` [PATCH V2 1/2] irqchip/loongson-pch-pic: " Jianmin Lv @ 2022-10-08 2:51 ` Jianmin Lv 1 sibling, 0 replies; 7+ messages in thread From: Jianmin Lv @ 2022-10-08 2:51 UTC (permalink / raw) To: Thomas Gleixner, Marc Zyngier Cc: linux-kernel, loongarch, Jiaxun Yang, Huacai Chen, Bjorn Helgaas, Len Brown, rafael, linux-pci, linux-acpi For ACPI path, the xlate callback used IRQ_TYPE_NONE and ignored the irq type in intspec[1]. For supporting to set type for irqs of the irqdomain, intspec[1] should be used to get irq type. Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn> --- drivers/irqchip/irq-loongson-liointc.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/irqchip/irq-loongson-liointc.c b/drivers/irqchip/irq-loongson-liointc.c index 0da8716f8f24..838c8fa2d868 100644 --- a/drivers/irqchip/irq-loongson-liointc.c +++ b/drivers/irqchip/irq-loongson-liointc.c @@ -167,7 +167,12 @@ static int liointc_domain_xlate(struct irq_domain *d, struct device_node *ctrlr, if (WARN_ON(intsize < 1)) return -EINVAL; *out_hwirq = intspec[0] - GSI_MIN_CPU_IRQ; - *out_type = IRQ_TYPE_NONE; + + if (intsize > 1) + *out_type = intspec[1] & IRQ_TYPE_SENSE_MASK; + else + *out_type = IRQ_TYPE_NONE; + return 0; } -- 2.31.1 ^ permalink raw reply related [flat|nested] 7+ messages in thread
end of thread, other threads:[~2022-10-09 2:36 UTC | newest] Thread overview: 7+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2022-10-08 2:51 [PATCH V2 0/2] irqchip: Support to set irq type for ACPI path Jianmin Lv 2022-10-08 2:51 ` [PATCH V2 1/2] irqchip/loongson-pch-pic: " Jianmin Lv 2022-10-09 1:08 ` Marc Zyngier 2022-10-09 2:26 ` Jianmin Lv 2022-10-09 2:31 ` Marc Zyngier 2022-10-09 2:36 ` Jianmin Lv 2022-10-08 2:51 ` [PATCH V2 2/2] irqchip/loongson-liointc: " Jianmin Lv
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox