From: fisaksen@baylibre.com (Frode Isaksen)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 1/6] spi: davinci: Use SPI framework to handle DMA mapping
Date: Thu, 23 Feb 2017 19:01:56 +0100 [thread overview]
Message-ID: <1487872921-26628-2-git-send-email-fisaksen@baylibre.com> (raw)
In-Reply-To: <1487872921-26628-1-git-send-email-fisaksen@baylibre.com>
From: Fabien Parent <fparent@baylibre.com>
Uppers layers like MTD can pass vmalloc'd buffers to the SPI driver,
and the current implementation will fail to map these kind of buffers.
The SPI framework is able to detect the best way to handle and map
buffers.
This commit updates the davinci SPI driver in order to use the SPI
framework to handle the DMA mapping of buffers coming from an upper
layer.
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Frode Isaksen <fisaksen@baylibre.com>
---
drivers/spi/spi-davinci.c | 69 +++++++++++++----------------------------------
1 file changed, 18 insertions(+), 51 deletions(-)
diff --git a/drivers/spi/spi-davinci.c b/drivers/spi/spi-davinci.c
index 02fb967..164cc71 100644
--- a/drivers/spi/spi-davinci.c
+++ b/drivers/spi/spi-davinci.c
@@ -467,6 +467,19 @@ static void davinci_spi_cleanup(struct spi_device *spi)
kfree(spicfg);
}
+static bool davinci_spi_can_dma(struct spi_master *master,
+ struct spi_device *spi,
+ struct spi_transfer *xfer)
+{
+ struct davinci_spi_config *spicfg = spi->controller_data;
+ bool can_dma = false;
+
+ if (spicfg)
+ can_dma = spicfg->io_type == SPI_IO_TYPE_DMA;
+
+ return can_dma;
+}
+
static int davinci_spi_check_error(struct davinci_spi *dspi, int int_status)
{
struct device *sdev = dspi->bitbang.master->dev.parent;
@@ -581,8 +594,6 @@ static int davinci_spi_bufs(struct spi_device *spi, struct spi_transfer *t)
struct davinci_spi_config *spicfg;
struct davinci_spi_platform_data *pdata;
unsigned uninitialized_var(rx_buf_count);
- void *dummy_buf = NULL;
- struct scatterlist sg_rx, sg_tx;
dspi = spi_master_get_devdata(spi->master);
pdata = &dspi->pdata;
@@ -630,51 +641,18 @@ static int davinci_spi_bufs(struct spi_device *spi, struct spi_transfer *t)
};
struct dma_async_tx_descriptor *rxdesc;
struct dma_async_tx_descriptor *txdesc;
- void *buf;
-
- dummy_buf = kzalloc(t->len, GFP_KERNEL);
- if (!dummy_buf)
- goto err_alloc_dummy_buf;
dmaengine_slave_config(dspi->dma_rx, &dma_rx_conf);
dmaengine_slave_config(dspi->dma_tx, &dma_tx_conf);
- sg_init_table(&sg_rx, 1);
- if (!t->rx_buf)
- buf = dummy_buf;
- else
- buf = t->rx_buf;
- t->rx_dma = dma_map_single(&spi->dev, buf,
- t->len, DMA_FROM_DEVICE);
- if (dma_mapping_error(&spi->dev, !t->rx_dma)) {
- ret = -EFAULT;
- goto err_rx_map;
- }
- sg_dma_address(&sg_rx) = t->rx_dma;
- sg_dma_len(&sg_rx) = t->len;
-
- sg_init_table(&sg_tx, 1);
- if (!t->tx_buf)
- buf = dummy_buf;
- else
- buf = (void *)t->tx_buf;
- t->tx_dma = dma_map_single(&spi->dev, buf,
- t->len, DMA_TO_DEVICE);
- if (dma_mapping_error(&spi->dev, t->tx_dma)) {
- ret = -EFAULT;
- goto err_tx_map;
- }
- sg_dma_address(&sg_tx) = t->tx_dma;
- sg_dma_len(&sg_tx) = t->len;
-
rxdesc = dmaengine_prep_slave_sg(dspi->dma_rx,
- &sg_rx, 1, DMA_DEV_TO_MEM,
+ t->rx_sg.sgl, t->rx_sg.nents, DMA_DEV_TO_MEM,
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
if (!rxdesc)
goto err_desc;
txdesc = dmaengine_prep_slave_sg(dspi->dma_tx,
- &sg_tx, 1, DMA_MEM_TO_DEV,
+ t->tx_sg.sgl, t->tx_sg.nents, DMA_MEM_TO_DEV,
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
if (!txdesc)
goto err_desc;
@@ -710,16 +688,9 @@ static int davinci_spi_bufs(struct spi_device *spi, struct spi_transfer *t)
}
clear_io_bits(dspi->base + SPIINT, SPIINT_MASKALL);
- if (spicfg->io_type == SPI_IO_TYPE_DMA) {
+ if (spicfg->io_type == SPI_IO_TYPE_DMA)
clear_io_bits(dspi->base + SPIINT, SPIINT_DMA_REQ_EN);
- dma_unmap_single(&spi->dev, t->rx_dma,
- t->len, DMA_FROM_DEVICE);
- dma_unmap_single(&spi->dev, t->tx_dma,
- t->len, DMA_TO_DEVICE);
- kfree(dummy_buf);
- }
-
clear_io_bits(dspi->base + SPIGCR1, SPIGCR1_SPIENA_MASK);
set_io_bits(dspi->base + SPIGCR1, SPIGCR1_POWERDOWN_MASK);
@@ -742,12 +713,6 @@ static int davinci_spi_bufs(struct spi_device *spi, struct spi_transfer *t)
return t->len;
err_desc:
- dma_unmap_single(&spi->dev, t->tx_dma, t->len, DMA_TO_DEVICE);
-err_tx_map:
- dma_unmap_single(&spi->dev, t->rx_dma, t->len, DMA_FROM_DEVICE);
-err_rx_map:
- kfree(dummy_buf);
-err_alloc_dummy_buf:
return ret;
}
@@ -988,8 +953,10 @@ static int davinci_spi_probe(struct platform_device *pdev)
master->bus_num = pdev->id;
master->num_chipselect = pdata->num_chipselect;
master->bits_per_word_mask = SPI_BPW_RANGE_MASK(2, 16);
+ master->flags = (SPI_MASTER_MUST_RX | SPI_MASTER_MUST_TX);
master->setup = davinci_spi_setup;
master->cleanup = davinci_spi_cleanup;
+ master->can_dma = davinci_spi_can_dma;
dspi->bitbang.chipselect = davinci_spi_chipselect;
dspi->bitbang.setup_transfer = davinci_spi_setup_transfer;
--
2.7.4
next prev parent reply other threads:[~2017-02-23 18:01 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-02-23 18:01 [PATCH v3 0/6] Enable DMA for daVinci SPI controller Frode Isaksen
2017-02-23 18:01 ` Frode Isaksen [this message]
2017-03-07 14:22 ` Applied "spi: davinci: Use SPI framework to handle DMA mapping" to the spi tree Mark Brown
2017-02-23 18:01 ` [PATCH v3 2/6] spi: davinci: enable DMA when channels are defined in DT Frode Isaksen
2017-02-23 18:01 ` [PATCH v3 3/6] spi: davinci: use rx buffer as dummy tx buffer Frode Isaksen
2017-03-15 19:35 ` Mark Brown
2017-02-23 18:01 ` [PATCH v3 4/6] spi: davinci: do not use DMA if transfer length is less than 16 Frode Isaksen
2017-03-15 19:37 ` Applied "spi: davinci: do not use DMA if transfer length is less than 16" to the spi tree Mark Brown
2017-02-23 18:02 ` [PATCH v3 5/6] spi: davinci: do not use DMA for vmalloc'ed buffers Frode Isaksen
2017-03-15 19:37 ` Applied "spi: davinci: do not use DMA for vmalloc'ed buffers" to the spi tree Mark Brown
2017-02-23 18:02 ` [PATCH v3 6/6] spi: loopback-test: add option to use vmalloc'ed buffers Frode Isaksen
2017-03-16 14:11 ` Applied "spi: loopback-test: add option to use vmalloc'ed buffers" to the spi tree Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1487872921-26628-2-git-send-email-fisaksen@baylibre.com \
--to=fisaksen@baylibre.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox