[PATCH 12/13] arm64: dts: freescale: imx93-phyboard-segin: Add I2S audio

[Primoz Fiser <primoz.fiser@norik.com>]

Add support for I2S audio found on phyBOARD-Segin-i.MX93. Audio codec
TLV320AIC3007 is connected to SAI1 interface as a DAI master. MCLK is
provided from the SAI's internal audio PLL (19.2 MHz).

Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
---
 .../dts/freescale/imx93-phyboard-segin.dts    | 75 +++++++++++++++++++
 1 file changed, 75 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx93-phyboard-segin.dts b/arch/arm64/boot/dts/freescale/imx93-phyboard-segin.dts
index faad3c3e627c..08574b146400 100644
--- a/arch/arm64/boot/dts/freescale/imx93-phyboard-segin.dts
+++ b/arch/arm64/boot/dts/freescale/imx93-phyboard-segin.dts
@@ -37,6 +37,20 @@ reg_flexcan1_en: regulator-flexcan1-en {
 		regulator-name = "CAN1_EN";
 	};
 
+	reg_sound_1v8: regulator-sound-1v8 {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "VCC1V8_AUDIO";
+	};
+
+	reg_sound_3v3: regulator-sound-3v3 {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "VCC3V3_ANALOG";
+	};
+
 	reg_usdhc2_vmmc: regulator-usdhc2 {
 		compatible = "regulator-fixed";
 		enable-active-high;
@@ -47,6 +61,34 @@ reg_usdhc2_vmmc: regulator-usdhc2 {
 		regulator-max-microvolt = <3300000>;
 		regulator-name = "VCC_SD";
 	};
+
+	sound: sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "phyBOARD-Segin-TLV320AIC3007";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&dailink_master>;
+		simple-audio-card,frame-master = <&dailink_master>;
+		simple-audio-card,widgets =
+			"Line", "Line In",
+			"Line", "Line Out",
+			"Speaker", "Speaker";
+		simple-audio-card,routing =
+			"Line Out", "LLOUT",
+			"Line Out", "RLOUT",
+			"Speaker", "SPOP",
+			"Speaker", "SPOM",
+			"LINE1L", "Line In",
+			"LINE1R", "Line In";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai1>;
+		};
+
+		dailink_master: simple-audio-card,codec {
+			sound-dai = <&audio_codec>;
+			clocks = <&clk IMX93_CLK_SAI1>;
+		};
+	};
 };
 
 /* CAN */
@@ -64,6 +106,18 @@ &lpi2c2 {
 	pinctrl-0 = <&pinctrl_lpi2c2>;
 	status = "okay";
 
+	/* Codec */
+	audio_codec: audio-codec@18 {
+		compatible = "ti,tlv320aic3007";
+		reg = <0x18>;
+		#sound-dai-cells = <0>;
+
+		AVDD-supply = <&reg_sound_3v3>;
+		IOVDD-supply = <&reg_sound_3v3>;
+		DRVDD-supply = <&reg_sound_3v3>;
+		DVDD-supply = <&reg_sound_1v8>;
+	};
+
 	/* RTC */
 	i2c_rtc: rtc@68 {
 		compatible = "microcrystal,rv4162";
@@ -82,6 +136,17 @@ &lpuart1 {
 	status = "okay";
 };
 
+/* Audio */
+&sai1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai1>;
+	assigned-clocks = <&clk IMX93_CLK_SAI1>;
+	assigned-clock-parents = <&clk IMX93_CLK_AUDIO_PLL>;
+	assigned-clock-rates = <19200000>;
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
 /* USB  */
 &usbotg1 {
 	disable-over-current;
@@ -150,6 +215,16 @@ MX93_PAD_ENET2_RD2__GPIO4_IO26		0x31e
 		>;
 	};
 
+	pinctrl_sai1: sai1grp {
+		fsl,pins = <
+			MX93_PAD_UART2_RXD__SAI1_MCLK		0x1202
+			MX93_PAD_SAI1_TXFS__SAI1_TX_SYNC	0x1202
+			MX93_PAD_SAI1_TXC__SAI1_TX_BCLK		0x1202
+			MX93_PAD_SAI1_TXD0__SAI1_TX_DATA00	0x1402
+			MX93_PAD_SAI1_RXD0__SAI1_RX_DATA00	0x1402
+		>;
+	};
+
 	pinctrl_usdhc2_cd: usdhc2cdgrp {
 		fsl,pins = <
 			MX93_PAD_SD2_CD_B__GPIO3_IO00		0x31e
-- 
2.34.1