From: Primoz Fiser <primoz.fiser@norik.com>
To: Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>
Cc: devicetree@vger.kernel.org, imx@lists.linux.dev,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, upstream@lists.phytec.de
Subject: [PATCH 03/13] arm64: dts: freescale: imx93-phycore-som: Disable LED pull-up
Date: Thu, 10 Apr 2025 11:02:41 +0200 [thread overview]
Message-ID: <20250410090251.1103979-4-primoz.fiser@norik.com> (raw)
In-Reply-To: <20250410090251.1103979-1-primoz.fiser@norik.com>
There is already an external pull-down resistor on the LED output line.
It makes no sense to have both pull-down and pull-up resistors enabled
at the same time. Thus disable the internal pull-down.
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
---
arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi b/arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi
index 442ee067a047..82f680d891c2 100644
--- a/arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi
@@ -196,7 +196,7 @@ MX93_PAD_ENET2_TD2__ENET1_TX_CLK 0x4000050e
pinctrl_leds: ledsgrp {
fsl,pins = <
- MX93_PAD_I2C1_SDA__GPIO1_IO01 0x31e
+ MX93_PAD_I2C1_SDA__GPIO1_IO01 0x11e
>;
};
--
2.34.1
next prev parent reply other threads:[~2025-04-10 11:16 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-04-10 9:02 [PATCH 00/13] Update PHYTEC i.MX93 DTS Primoz Fiser
2025-04-10 9:02 ` [PATCH 01/13] arm64: dts: freescale: imx93-phycore-som: Add PMIC support Primoz Fiser
2025-04-10 14:53 ` Frank Li
2025-04-10 9:02 ` [PATCH 02/13] arm64: dts: freescale: imx93-phycore-som: Add EEPROM support Primoz Fiser
2025-04-10 14:54 ` Frank Li
2025-04-10 9:02 ` Primoz Fiser [this message]
2025-04-10 14:49 ` [PATCH 03/13] arm64: dts: freescale: imx93-phycore-som: Disable LED pull-up Frank Li
2025-04-10 9:02 ` [PATCH 04/13] arm64: dts: freescale: imx93-phycore-som: Enhance eMMC pinctrl Primoz Fiser
2025-04-10 14:56 ` Frank Li
2025-04-11 6:29 ` Primoz Fiser
2025-04-11 14:34 ` Frank Li
2025-04-10 9:02 ` [PATCH 05/13] arm64: dts: freescale: imx93-phycore-som: Add eMMC no-1-8-v by default Primoz Fiser
2025-04-10 15:01 ` Frank Li
2025-04-11 6:51 ` Primoz Fiser
2025-04-11 14:32 ` Frank Li
2025-04-10 9:02 ` [PATCH 06/13] arm64: dts: freescale: imx93-phyboard-segin: Drop eMMC no-1-8-v flag Primoz Fiser
2025-04-10 15:02 ` Frank Li
2025-04-12 16:23 ` Stefan Wahren
2025-04-14 10:39 ` Primoz Fiser
2025-04-14 11:31 ` Stefan Wahren
2025-04-10 9:02 ` [PATCH 07/13] arm64: dts: freescale: imx93-phyboard-segin: Disable SD-card write-protect Primoz Fiser
2025-04-10 15:05 ` Frank Li
2025-04-10 9:02 ` [PATCH 08/13] arm64: dts: freescale: imx93-phyboard-segin: Fix SD-card pinctrl Primoz Fiser
2025-04-10 15:08 ` Frank Li
2025-04-10 9:02 ` [PATCH 09/13] arm64: dts: freescale: imx93-phyboard-segin: Add RTC support Primoz Fiser
2025-04-10 15:12 ` Frank Li
2025-04-11 7:51 ` Primoz Fiser
2025-04-10 9:02 ` [PATCH 10/13] arm64: dts: freescale: imx93-phyboard-segin: Add CAN support Primoz Fiser
2025-04-10 15:23 ` Frank Li
2025-04-11 8:08 ` Primoz Fiser
2025-04-11 14:30 ` Frank Li
2025-04-12 13:41 ` Marc Kleine-Budde
2025-04-14 8:02 ` Primoz Fiser
2025-04-10 9:02 ` [PATCH 11/13] arm64: dts: freescale: imx93-phyboard-segin: Add USB support Primoz Fiser
2025-04-10 15:25 ` Frank Li
2025-04-11 8:21 ` Ahmad Fatoum
2025-04-10 9:02 ` [PATCH 12/13] arm64: dts: freescale: imx93-phyboard-segin: Add I2S audio Primoz Fiser
2025-04-10 15:27 ` Frank Li
2025-04-10 9:02 ` [PATCH 13/13] arm64: dts: freescale: imx93-phyboard-segin: Add EQOS Ethernet Primoz Fiser
2025-04-10 15:30 ` Frank Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250410090251.1103979-4-primoz.fiser@norik.com \
--to=primoz.fiser@norik.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=upstream@lists.phytec.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox