[PATCH v8 0/5] Add i.MX943 PCIe supports

[PATCH v8 0/5] Add i.MX943 PCIe supports

[Richard Zhu]

This patch-set adds i.MX943 PCIe supports on EVK board. Please pay
attention to that it relies on the patch-set[1], and the PCIe1 port on
the EVK board relies on the [2].

Both of them are included in the v7.0 kernel.
[1] https://lore.kernel.org/imx/176649331066.523506.9443864112044699350.b4-ty@kernel.org/
[2] https://lore.kernel.org/imx/inzg46tc2fwsajxq4vzdyuiq7krzy6xtcg2mjaieninz7zsmgm@mtdjr4tuegpq/

Changes in v8:
- Drop the redundant strings since they are compatible with i.MX95.

Changes in v7:
- Fix the checkpatch.pl warning in the first patch. Sorry for not
understanding the comments provided by Krzysztof in the v4 patch-set.
- Adjust the compatible strings in alphabetical order.

Changes in v6:
- Let i.MX94 and i.MX943 EP mode compatible strings fallback to i.MX95 EP
mode complatible string too.
- Add missing space after "=" in pcie0_ep node.

Changes in v5:
- Add Reviewed-by tag in first patch.
- Add i.MX94/i.MX943 compatible strings.
- Add "dma" irq for i.MX94/i.MX943 PCIe.
- Add 'fsl,max-link-speed = <3>;' back. Because that Link speed is decided
by pcie_link_speed[pci->max_link_speed]; Found it when one Gen3 NVME SSD is
used in the tests.

Changes in v4:
- Add missing space after comma or '='.
- Remove 'fsl,max-link-speed = <3>;' in dts, since it's not required anymore.

Changes in v3:
- Fix build warning in the dtbs_check.

Changes in v2:
- Refine the nodes sequence refer to Frank's comments.
- Rely on [3], and remove the duplacated codes mentioned by Sherry.
[3] https://patchwork.kernel.org/project/imx/patch/20260204022306.2372889-1-sherry.sun@nxp.com/

[PATCH v8 1/5] dt-bindings: PCI: imx6q-pcie: Change maxItems of
[PATCH v8 2/5] dt-bindings: PCI: imx6q-pcie: Add i.MX94 and i.MX943
[PATCH v8 3/5] arm64: dts: imx94: Add pcie0 and pcie0-ep supports
[PATCH v8 4/5] arm64: dts: imx943: Add pcie1 and pcie1-ep supports
[PATCH v8 5/5] arm64: dts: imx943-evk: Add pcie[0,1] and pcie-ep[0,1]

Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-common.yaml |  4 ++--
Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.yaml     | 18 ++++++++++++------
Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml        | 29 +++++++++++++++++-----------
arch/arm64/boot/dts/freescale/Makefile                           |  4 ++++
arch/arm64/boot/dts/freescale/imx94.dtsi                         | 88 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
arch/arm64/boot/dts/freescale/imx943-evk.dts                     | 83 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
arch/arm64/boot/dts/freescale/imx943.dtsi                        | 75 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
7 files changed, 282 insertions(+), 19 deletions(-)

[PATCH v8 1/5] dt-bindings: PCI: imx6q-pcie: Change maxItems of clocks and clock-names to 6

[Richard Zhu]

Previous commit 1352f58d7c8d ("dt-bindings: PCI: pci-imx6: Add external
reference clock input") was incomplete.

The constraints for "clocks" and "clock-names" still enforce an incorrect
number of items. Update maxItems for both properties to 6 to match the
actual hardware configuration.

Fixes: 1352f58d7c8d ("dt-bindings: PCI: pci-imx6: Add external reference clock input")
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
---
 .../devicetree/bindings/pci/fsl,imx6q-pcie-common.yaml        | 4 ++--
 Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml     | 3 ++-
 2 files changed, 4 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-common.yaml b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-common.yaml
index cddbe21f99f2..0488c942092d 100644
--- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-common.yaml
+++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-common.yaml
@@ -17,11 +17,11 @@ description:
 properties:
   clocks:
     minItems: 3
-    maxItems: 5
+    maxItems: 6
 
   clock-names:
     minItems: 3
-    maxItems: 5
+    maxItems: 6
 
   num-lanes:
     const: 1
diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
index 12a01f7a5744..21dda8066014 100644
--- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
@@ -40,7 +40,8 @@ properties:
       - description: PCIe PHY clock.
       - description: Additional required clock entry for imx6sx-pcie,
            imx6sx-pcie-ep, imx8mq-pcie, imx8mq-pcie-ep.
-      - description: PCIe reference clock.
+      - description: PCIe internal reference clock.
+      - description: PCIe additional external reference clock.
 
   clock-names:
     minItems: 3
-- 
2.37.1

[PATCH v8 2/5] dt-bindings: PCI: imx6q-pcie: Add i.MX94 and i.MX943 PCIe compatible strings

[Richard Zhu]

Add i.MX94 and i.MX943 PCIe compatible strings and fallback to
i.MX95 PCIe compatible string.

Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
---
 .../bindings/pci/fsl,imx6q-pcie-ep.yaml       | 18 ++++++++-----
 .../bindings/pci/fsl,imx6q-pcie.yaml          | 26 ++++++++++++-------
 2 files changed, 28 insertions(+), 16 deletions(-)

diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.yaml
index 0b3526de1d62..e4e30da0acb0 100644
--- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.yaml
+++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.yaml
@@ -18,12 +18,18 @@ description: |+
 
 properties:
   compatible:
-    enum:
-      - fsl,imx8mm-pcie-ep
-      - fsl,imx8mq-pcie-ep
-      - fsl,imx8mp-pcie-ep
-      - fsl,imx8q-pcie-ep
-      - fsl,imx95-pcie-ep
+    oneOf:
+      - enum:
+          - fsl,imx8mm-pcie-ep
+          - fsl,imx8mp-pcie-ep
+          - fsl,imx8mq-pcie-ep
+          - fsl,imx8q-pcie-ep
+          - fsl,imx95-pcie-ep
+      - items:
+          - enum:
+              - fsl,imx94-pcie-ep
+              - fsl,imx943-pcie-ep
+          - const: fsl,imx95-pcie-ep
 
   clocks:
     minItems: 3
diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
index 21dda8066014..9d1349855b42 100644
--- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
@@ -21,16 +21,22 @@ description: |+
 
 properties:
   compatible:
-    enum:
-      - fsl,imx6q-pcie
-      - fsl,imx6sx-pcie
-      - fsl,imx6qp-pcie
-      - fsl,imx7d-pcie
-      - fsl,imx8mq-pcie
-      - fsl,imx8mm-pcie
-      - fsl,imx8mp-pcie
-      - fsl,imx95-pcie
-      - fsl,imx8q-pcie
+    oneOf:
+      - enum:
+          - fsl,imx6q-pcie
+          - fsl,imx6qp-pcie
+          - fsl,imx6sx-pcie
+          - fsl,imx7d-pcie
+          - fsl,imx8mm-pcie
+          - fsl,imx8mp-pcie
+          - fsl,imx8mq-pcie
+          - fsl,imx8q-pcie
+          - fsl,imx95-pcie
+      - items:
+          - enum:
+              - fsl,imx94-pcie
+              - fsl,imx943-pcie
+          - const: fsl,imx95-pcie
 
   clocks:
     minItems: 3
-- 
2.37.1

Re: [PATCH v8 2/5] dt-bindings: PCI: imx6q-pcie: Add i.MX94 and i.MX943 PCIe compatible strings

[Rob Herring (Arm)]

On Tue, 24 Mar 2026 10:30:33 +0800, Richard Zhu wrote:
> Add i.MX94 and i.MX943 PCIe compatible strings and fallback to
> i.MX95 PCIe compatible string.
> 
> Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
> ---
>  .../bindings/pci/fsl,imx6q-pcie-ep.yaml       | 18 ++++++++-----
>  .../bindings/pci/fsl,imx6q-pcie.yaml          | 26 ++++++++++++-------
>  2 files changed, 28 insertions(+), 16 deletions(-)
> 

Reviewed-by: Rob Herring (Arm) <robh@kernel.org>

[PATCH v8 3/5] arm64: dts: imx94: Add pcie0 and pcie0-ep supports

[Richard Zhu]

Add pcie0 and pcie0-ep supports.

Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx94.dtsi | 88 ++++++++++++++++++++++++
 1 file changed, 88 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx94.dtsi b/arch/arm64/boot/dts/freescale/imx94.dtsi
index 38488147a3ef..5d19c34cbc2b 100644
--- a/arch/arm64/boot/dts/freescale/imx94.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx94.dtsi
@@ -66,6 +66,13 @@ sai4_mclk: clock-sai4-mclk1 {
 		clock-output-names = "sai4_mclk";
 	};
 
+	clk_sys100m: clock-sys100m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+		clock-output-names = "clk_sys100m";
+	};
+
 	firmware {
 		scmi {
 			compatible = "arm,scmi";
@@ -1230,6 +1237,14 @@ wdog3: watchdog@49220000 {
 			};
 		};
 
+		hsio_blk_ctl: syscon@4c0100c0 {
+			compatible = "nxp,imx95-hsio-blk-ctl", "syscon";
+			reg = <0x0 0x4c0100c0 0x0 0x1>;
+			#clock-cells = <1>;
+			clocks = <&clk_sys100m>;
+			power-domains = <&scmi_devpd IMX94_PD_HSIO_TOP>;
+		};
+
 		usb3: usb@4c100000 {
 			compatible = "nxp,imx94-dwc3", "nxp,imx8mp-dwc3";
 			reg = <0x0 0x4c100000 0x0 0x10000>,
@@ -1284,6 +1299,79 @@ usbmisc: usbmisc@4c200200 {
 			#index-cells = <1>;
 		};
 
+		pcie0: pcie@4c300000 {
+			compatible = "fsl,imx94-pcie", "fsl,imx95-pcie";
+			reg = <0 0x4c300000 0 0x10000>,
+			      <0 0x60100000 0 0xfe00000>,
+			      <0 0x4c360000 0 0x10000>,
+			      <0 0x4c340000 0 0x4000>;
+			reg-names = "dbi", "config", "atu", "app";
+			ranges = <0x81000000 0x0 0x00000000 0x0 0x6ff00000 0 0x00100000>,
+				 <0x82000000 0x0 0x10000000 0x9 0x10000000 0 0x80000000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			linux,pci-domain = <2>;
+			msi-map = <0x0 &its 0x10 0x1>,
+				  <0x100 &its 0x11 0x7>;
+			msi-map-mask = <0x1ff>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <1>;
+			num-viewport = <8>;
+			interrupts = <GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi", "dma";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &gic 0 0 GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &gic 0 0 GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &gic 0 0 GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &gic 0 0 GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&scmi_clk IMX94_CLK_HSIO>,
+				 <&scmi_clk IMX94_CLK_HSIOPLL>,
+				 <&scmi_clk IMX94_CLK_HSIOPLL_VCO>,
+				 <&scmi_clk IMX94_CLK_HSIOPCIEAUX>,
+				 <&hsio_blk_ctl 0>;
+			clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux", "ref";
+			assigned-clocks = <&scmi_clk IMX94_CLK_HSIOPLL_VCO>,
+					  <&scmi_clk IMX94_CLK_HSIOPLL>,
+					  <&scmi_clk IMX94_CLK_HSIOPCIEAUX>;
+			assigned-clock-rates = <3600000000>, <100000000>, <10000000>;
+			assigned-clock-parents = <0>, <0>,
+						 <&scmi_clk IMX94_CLK_SYSPLL1_PFD1_DIV2>;
+			power-domains = <&scmi_devpd IMX94_PD_HSIO_TOP>;
+			fsl,max-link-speed = <3>;
+			status = "disabled";
+		};
+
+		pcie0_ep: pcie-ep@4c300000 {
+			compatible = "fsl,imx94-pcie-ep", "fsl,imx95-pcie-ep";
+			reg = <0 0x4c300000 0 0x10000>,
+			      <0 0x4c360000 0 0x1000>,
+			      <0 0x4c320000 0 0x1000>,
+			      <0 0x4c340000 0 0x4000>,
+			      <0 0x4c370000 0 0x10000>,
+			      <0x9 0 1 0>;
+			reg-names = "dbi", "atu", "dbi2", "app", "dma", "addr_space";
+			num-lanes = <1>;
+			interrupts = <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dma";
+			clocks = <&scmi_clk IMX94_CLK_HSIO>,
+				 <&scmi_clk IMX94_CLK_HSIOPLL>,
+				 <&scmi_clk IMX94_CLK_HSIOPLL_VCO>,
+				 <&scmi_clk IMX94_CLK_HSIOPCIEAUX>;
+			clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux";
+			assigned-clocks = <&scmi_clk IMX94_CLK_HSIOPLL_VCO>,
+					  <&scmi_clk IMX94_CLK_HSIOPLL>,
+					  <&scmi_clk IMX94_CLK_HSIOPCIEAUX>;
+			assigned-clock-rates = <3600000000>, <100000000>, <10000000>;
+			assigned-clock-parents = <0>, <0>,
+						 <&scmi_clk IMX94_CLK_SYSPLL1_PFD1_DIV2>;
+			msi-map = <0x0 &its 0x10 0x1>;
+			power-domains = <&scmi_devpd IMX94_PD_HSIO_TOP>;
+			status = "disabled";
+		};
+
 		netc_blk_ctrl: system-controller@4ceb0000 {
 			compatible = "nxp,imx94-netc-blk-ctrl";
 			reg = <0x0 0x4ceb0000 0x0 0x10000>,
-- 
2.37.1

Re: [PATCH v8 3/5] arm64: dts: imx94: Add pcie0 and pcie0-ep supports

[Frank Li]

On Tue, Mar 24, 2026 at 10:30:34AM +0800, Richard Zhu wrote:
> Add pcie0 and pcie0-ep supports.
>
> Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
> ---

DTS part fail to apply, can you rebase to v7.1-rc1.

Frank

>

RE: [PATCH v8 3/5] arm64: dts: imx94: Add pcie0 and pcie0-ep supports

[Hongxing Zhu]

> -----Original Message-----
> From: Frank Li <frank.li@nxp.com>
> Sent: Tuesday, May 5, 2026 5:18 AM
> To: Hongxing Zhu <hongxing.zhu@nxp.com>
> Cc: robh@kernel.org; krzk+dt@kernel.org; conor+dt@kernel.org;
> bhelgaas@google.com; l.stach@pengutronix.de; lpieralisi@kernel.org;
> kwilczynski@kernel.org; mani@kernel.org; s.hauer@pengutronix.de;
> kernel@pengutronix.de; festevam@gmail.com; linux-pci@vger.kernel.org; linux-
> arm-kernel@lists.infradead.org; devicetree@vger.kernel.org;
> imx@lists.linux.dev; linux-kernel@vger.kernel.org
> Subject: Re: [PATCH v8 3/5] arm64: dts: imx94: Add pcie0 and pcie0-ep supports
> 
> On Tue, Mar 24, 2026 at 10:30:34AM +0800, Richard Zhu wrote:
> > Add pcie0 and pcie0-ep supports.
> >
> > Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
> > ---
> 
> DTS part fail to apply, can you rebase to v7.1-rc1.
Hi Frank:
Okay,  would rebase to v7.1-rc1, and resend the dts part.
Would update the according changes later when the following two patch-set are
merged.
[1] [PATCH V14 00/12] pci-imx6: Add support for parsing the reset property in
new Root Port binding
[2] [PATCH V2 0/8] PCI: imx6: Integrate pwrctrl API and update device trees

Best Regards
Richard Zhu
> 
> Frank
> 
> >

[PATCH v8 4/5] arm64: dts: imx943: Add pcie1 and pcie1-ep supports

[Richard Zhu]

Add pcie1 and pcie1-ep supports.

Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx943.dtsi | 75 +++++++++++++++++++++++
 1 file changed, 75 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx943.dtsi b/arch/arm64/boot/dts/freescale/imx943.dtsi
index 45b8da758e87..8575134176f5 100644
--- a/arch/arm64/boot/dts/freescale/imx943.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx943.dtsi
@@ -145,4 +145,79 @@ l3_cache: l3-cache {
 			cache-unified;
 		};
 	};
+
+	soc {
+		pcie1: pcie@4c380000 {
+			compatible = "fsl,imx943-pcie", "fsl,imx95-pcie";
+			reg = <0 0x4c380000 0 0x10000>,
+			      <8 0x80100000 0 0xfe00000>,
+			      <0 0x4c3e0000 0 0x10000>,
+			      <0 0x4c3c0000 0 0x4000>;
+			reg-names = "dbi", "config", "atu", "app";
+			ranges = <0x81000000 0 0x00000000 0x8 0x8ff00000 0 0x00100000>,
+				 <0x82000000 0 0x10000000 0xa 0x10000000 0 0x80000000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			linux,pci-domain = <3>;
+			msi-map = <0x0 &its 0x98 0x1>,
+				  <0x100 &its 0x99 0x7>;
+			msi-map-mask = <0x1ff>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <1>;
+			num-viewport = <8>;
+			interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi", "dma";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &gic 0 0 GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &gic 0 0 GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &gic 0 0 GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &gic 0 0 GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&scmi_clk IMX94_CLK_HSIO>,
+				 <&scmi_clk IMX94_CLK_HSIOPLL>,
+				 <&scmi_clk IMX94_CLK_HSIOPLL_VCO>,
+				 <&scmi_clk IMX94_CLK_HSIOPCIEAUX>,
+				 <&hsio_blk_ctl 0>;
+			clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux", "ref";
+			assigned-clocks = <&scmi_clk IMX94_CLK_HSIOPLL_VCO>,
+					  <&scmi_clk IMX94_CLK_HSIOPLL>,
+					  <&scmi_clk IMX94_CLK_HSIOPCIEAUX>;
+			assigned-clock-rates = <3600000000>, <100000000>, <10000000>;
+			assigned-clock-parents = <0>, <0>,
+						 <&scmi_clk IMX94_CLK_SYSPLL1_PFD1_DIV2>;
+			power-domains = <&scmi_devpd IMX94_PD_HSIO_TOP>;
+			fsl,max-link-speed = <3>;
+			status = "disabled";
+		};
+
+		pcie1_ep: pcie-ep@4c380000 {
+			compatible = "fsl,imx943-pcie-ep", "fsl,imx95-pcie-ep";
+			reg = <0 0x4c380000 0 0x10000>,
+			      <0 0x4c3e0000 0 0x1000>,
+			      <0 0x4c3a0000 0 0x1000>,
+			      <0 0x4c3c0000 0 0x4000>,
+			      <0 0x4c3f0000 0 0x10000>,
+			      <0xa 0 1 0>;
+			reg-names = "dbi", "atu", "dbi2", "app", "dma", "addr_space";
+			num-lanes = <1>;
+			interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dma";
+			clocks = <&scmi_clk IMX94_CLK_HSIO>,
+				 <&scmi_clk IMX94_CLK_HSIOPLL>,
+				 <&scmi_clk IMX94_CLK_HSIOPLL_VCO>,
+				 <&scmi_clk IMX94_CLK_HSIOPCIEAUX>;
+			clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux";
+			assigned-clocks = <&scmi_clk IMX94_CLK_HSIOPLL_VCO>,
+					  <&scmi_clk IMX94_CLK_HSIOPLL>,
+					  <&scmi_clk IMX94_CLK_HSIOPCIEAUX>;
+			assigned-clock-rates = <3600000000>, <100000000>, <10000000>;
+			assigned-clock-parents = <0>, <0>,
+						 <&scmi_clk IMX94_CLK_SYSPLL1_PFD1_DIV2>;
+			msi-map = <0x0 &its 0x98 0x1>;
+			power-domains = <&scmi_devpd IMX94_PD_HSIO_TOP>;
+			status = "disabled";
+		};
+	};
 };
-- 
2.37.1

[PATCH v8 5/5] arm64: dts: imx943-evk: Add pcie[0,1] and pcie-ep[0,1] support

[Richard Zhu]

Add pcie[0,1] and pcie-ep[0,1] support.

Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
---
 arch/arm64/boot/dts/freescale/Makefile       |  4 +
 arch/arm64/boot/dts/freescale/imx943-evk.dts | 83 ++++++++++++++++++++
 2 files changed, 87 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index bae24b53bce6..1366e25a9efd 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -465,6 +465,10 @@ dtb-$(CONFIG_ARCH_MXC) += imx95-19x19-evk-sof.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx95-toradex-smarc-dev.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx95-tqma9596sa-mb-smarc-2.dtb
 
+imx943-evk-pcie0-ep-dtbs += imx943-evk.dtb imx-pcie0-ep.dtbo
+imx943-evk-pcie1-ep-dtbs += imx943-evk.dtb imx-pcie1-ep.dtbo
+dtb-$(CONFIG_ARCH_MXC) += imx943-evk-pcie0-ep.dtb imx943-evk-pcie1-ep.dtb
+
 imx95-15x15-evk-pcie0-ep-dtbs = imx95-15x15-evk.dtb imx-pcie0-ep.dtbo
 dtb-$(CONFIG_ARCH_MXC) += imx95-15x15-evk-pcie0-ep.dtb
 imx95-19x19-evk-pcie0-ep-dtbs += imx95-19x19-evk.dtb imx-pcie0-ep.dtbo
diff --git a/arch/arm64/boot/dts/freescale/imx943-evk.dts b/arch/arm64/boot/dts/freescale/imx943-evk.dts
index 1d834379f602..ea0100b37d5c 100644
--- a/arch/arm64/boot/dts/freescale/imx943-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx943-evk.dts
@@ -51,6 +51,20 @@ chosen {
 		stdout-path = &lpuart1;
 	};
 
+	pcie_ref_clk: clock-pcie-ref {
+		compatible = "gpio-gate-clock";
+		clocks = <&xtal25m>;
+		#clock-cells = <0>;
+		enable-gpios = <&pca9670_i2c3 7 GPIO_ACTIVE_LOW>;
+	};
+
+	xtal25m: clock-xtal25m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+		clock-output-names = "xtal_25MHz";
+	};
+
 	dmic: dmic {
 		compatible = "dmic-codec";
 		#sound-dai-cells = <0>;
@@ -72,6 +86,15 @@ reg_m2_pwr: regulator-m2-pwr {
 		startup-delay-us = <5000>;
 	};
 
+	reg_slot_pwr: regulator-slot-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "PCIe slot-power";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pcal6416_i2c3_u46 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
 	reg_m2_wlan: regulator-wlan {
 		compatible = "regulator-fixed";
 		regulator-name = "WLAN_EN";
@@ -704,6 +727,18 @@ IMX94_PAD_GPIO_IO28__LPI2C6_SCL		0x40000b9e
 		>;
 	};
 
+	pinctrl_pcie0: pcie0grp {
+		fsl,pins = <
+			IMX94_PAD_GPIO_IO20__PCIE1_CLKREQ_B	0x4000031e
+		>;
+	};
+
+	pinctrl_pcie1: pcie1grp {
+		fsl,pins = <
+			IMX94_PAD_GPIO_IO23__PCIE2_CLKREQ_B	0x4000031e
+		>;
+	};
+
 	pinctrl_pdm: pdmgrp {
 		fsl,pins = <
 			IMX94_PAD_PDM_CLK__PDM_CLK			0x31e
@@ -878,6 +913,54 @@ IMX94_PAD_XSPI1_DQS__XSPI1_A_DQS	0x3fe
 	};
 };
 
+&pcie0 {
+	pinctrl-0 = <&pinctrl_pcie0>;
+	pinctrl-names = "default";
+	clocks = <&scmi_clk IMX94_CLK_HSIO>,
+		 <&scmi_clk IMX94_CLK_HSIOPLL>,
+		 <&scmi_clk IMX94_CLK_HSIOPLL_VCO>,
+		 <&scmi_clk IMX94_CLK_HSIOPCIEAUX>,
+		 <&hsio_blk_ctl 0>,
+		 <&pcie_ref_clk>;
+	clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux",
+		      "ref", "extref";
+	reset-gpio = <&pcal6416_i2c3_u46 3 GPIO_ACTIVE_LOW>;
+	vpcie3v3aux-supply = <&reg_m2_wlan>;
+	supports-clkreq;
+	status = "okay";
+};
+
+&pcie0_ep {
+	pinctrl-0 = <&pinctrl_pcie0>;
+	pinctrl-names = "default";
+	vpcie-supply = <&reg_m2_wlan>;
+	status = "disabled";
+};
+
+&pcie1 {
+	pinctrl-0 = <&pinctrl_pcie1>;
+	pinctrl-names = "default";
+	clocks = <&scmi_clk IMX94_CLK_HSIO>,
+		 <&scmi_clk IMX94_CLK_HSIOPLL>,
+		 <&scmi_clk IMX94_CLK_HSIOPLL_VCO>,
+		 <&scmi_clk IMX94_CLK_HSIOPCIEAUX>,
+		 <&hsio_blk_ctl 0>,
+		 <&pcie_ref_clk>;
+	clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux",
+		      "ref", "extref";
+	reset-gpio = <&pcal6416_i2c3_u46 1 GPIO_ACTIVE_LOW>;
+	vpcie3v3aux-supply = <&reg_slot_pwr>;
+	supports-clkreq;
+	status = "okay";
+};
+
+&pcie1_ep {
+	pinctrl-0 = <&pinctrl_pcie1>;
+	pinctrl-names = "default";
+	vpcie-supply = <&reg_slot_pwr>;
+	status = "disabled";
+};
+
 &usb2 {
 	dr_mode = "otg";
 	disable-over-current;
-- 
2.37.1

Re: [PATCH v8 5/5] arm64: dts: imx943-evk: Add pcie[0,1] and pcie-ep[0,1] support

[Manivannan Sadhasivam]

On Tue, Mar 24, 2026 at 10:30:36AM +0800, Richard Zhu wrote:
> Add pcie[0,1] and pcie-ep[0,1] support.
> 
> Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
> ---
>  arch/arm64/boot/dts/freescale/Makefile       |  4 +
>  arch/arm64/boot/dts/freescale/imx943-evk.dts | 83 ++++++++++++++++++++
>  2 files changed, 87 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
> index bae24b53bce6..1366e25a9efd 100644
> --- a/arch/arm64/boot/dts/freescale/Makefile
> +++ b/arch/arm64/boot/dts/freescale/Makefile
> @@ -465,6 +465,10 @@ dtb-$(CONFIG_ARCH_MXC) += imx95-19x19-evk-sof.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx95-toradex-smarc-dev.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx95-tqma9596sa-mb-smarc-2.dtb
>  
> +imx943-evk-pcie0-ep-dtbs += imx943-evk.dtb imx-pcie0-ep.dtbo
> +imx943-evk-pcie1-ep-dtbs += imx943-evk.dtb imx-pcie1-ep.dtbo
> +dtb-$(CONFIG_ARCH_MXC) += imx943-evk-pcie0-ep.dtb imx943-evk-pcie1-ep.dtb
> +
>  imx95-15x15-evk-pcie0-ep-dtbs = imx95-15x15-evk.dtb imx-pcie0-ep.dtbo
>  dtb-$(CONFIG_ARCH_MXC) += imx95-15x15-evk-pcie0-ep.dtb
>  imx95-19x19-evk-pcie0-ep-dtbs += imx95-19x19-evk.dtb imx-pcie0-ep.dtbo
> diff --git a/arch/arm64/boot/dts/freescale/imx943-evk.dts b/arch/arm64/boot/dts/freescale/imx943-evk.dts
> index 1d834379f602..ea0100b37d5c 100644
> --- a/arch/arm64/boot/dts/freescale/imx943-evk.dts
> +++ b/arch/arm64/boot/dts/freescale/imx943-evk.dts
> @@ -51,6 +51,20 @@ chosen {
>  		stdout-path = &lpuart1;
>  	};
>  
> +	pcie_ref_clk: clock-pcie-ref {
> +		compatible = "gpio-gate-clock";
> +		clocks = <&xtal25m>;
> +		#clock-cells = <0>;
> +		enable-gpios = <&pca9670_i2c3 7 GPIO_ACTIVE_LOW>;
> +	};
> +
> +	xtal25m: clock-xtal25m {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <25000000>;
> +		clock-output-names = "xtal_25MHz";
> +	};
> +
>  	dmic: dmic {
>  		compatible = "dmic-codec";
>  		#sound-dai-cells = <0>;
> @@ -72,6 +86,15 @@ reg_m2_pwr: regulator-m2-pwr {
>  		startup-delay-us = <5000>;
>  	};
>  
> +	reg_slot_pwr: regulator-slot-pwr {
> +		compatible = "regulator-fixed";
> +		regulator-name = "PCIe slot-power";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		gpio = <&pcal6416_i2c3_u46 0 GPIO_ACTIVE_HIGH>;
> +		enable-active-high;
> +	};
> +
>  	reg_m2_wlan: regulator-wlan {
>  		compatible = "regulator-fixed";
>  		regulator-name = "WLAN_EN";
> @@ -704,6 +727,18 @@ IMX94_PAD_GPIO_IO28__LPI2C6_SCL		0x40000b9e
>  		>;
>  	};
>  
> +	pinctrl_pcie0: pcie0grp {
> +		fsl,pins = <
> +			IMX94_PAD_GPIO_IO20__PCIE1_CLKREQ_B	0x4000031e
> +		>;
> +	};
> +
> +	pinctrl_pcie1: pcie1grp {
> +		fsl,pins = <
> +			IMX94_PAD_GPIO_IO23__PCIE2_CLKREQ_B	0x4000031e
> +		>;
> +	};
> +
>  	pinctrl_pdm: pdmgrp {
>  		fsl,pins = <
>  			IMX94_PAD_PDM_CLK__PDM_CLK			0x31e
> @@ -878,6 +913,54 @@ IMX94_PAD_XSPI1_DQS__XSPI1_A_DQS	0x3fe
>  	};
>  };
>  
> +&pcie0 {
> +	pinctrl-0 = <&pinctrl_pcie0>;
> +	pinctrl-names = "default";
> +	clocks = <&scmi_clk IMX94_CLK_HSIO>,
> +		 <&scmi_clk IMX94_CLK_HSIOPLL>,
> +		 <&scmi_clk IMX94_CLK_HSIOPLL_VCO>,
> +		 <&scmi_clk IMX94_CLK_HSIOPCIEAUX>,
> +		 <&hsio_blk_ctl 0>,
> +		 <&pcie_ref_clk>;
> +	clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux",
> +		      "ref", "extref";
> +	reset-gpio = <&pcal6416_i2c3_u46 3 GPIO_ACTIVE_LOW>;
> +	vpcie3v3aux-supply = <&reg_m2_wlan>;
> +	supports-clkreq;
> +	status = "okay";
> +};
> +
> +&pcie0_ep {
> +	pinctrl-0 = <&pinctrl_pcie0>;
> +	pinctrl-names = "default";
> +	vpcie-supply = <&reg_m2_wlan>;
> +	status = "disabled";
> +};
> +
> +&pcie1 {
> +	pinctrl-0 = <&pinctrl_pcie1>;
> +	pinctrl-names = "default";
> +	clocks = <&scmi_clk IMX94_CLK_HSIO>,
> +		 <&scmi_clk IMX94_CLK_HSIOPLL>,
> +		 <&scmi_clk IMX94_CLK_HSIOPLL_VCO>,
> +		 <&scmi_clk IMX94_CLK_HSIOPCIEAUX>,
> +		 <&hsio_blk_ctl 0>,
> +		 <&pcie_ref_clk>;
> +	clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux",
> +		      "ref", "extref";
> +	reset-gpio = <&pcal6416_i2c3_u46 1 GPIO_ACTIVE_LOW>;
> +	vpcie3v3aux-supply = <&reg_slot_pwr>;

I'd strongly recommend you to switch to Root Port binding and make use of
PWRCTRL_GENERIC driver to handle this supply. But this can be done later.

- Mani

> +	supports-clkreq;
> +	status = "okay";
> +};
> +
> +&pcie1_ep {
> +	pinctrl-0 = <&pinctrl_pcie1>;
> +	pinctrl-names = "default";
> +	vpcie-supply = <&reg_slot_pwr>;
> +	status = "disabled";
> +};
> +
>  &usb2 {
>  	dr_mode = "otg";
>  	disable-over-current;
> -- 
> 2.37.1
> 

-- 
மணிவண்ணன் சதாசிவம்

Re: (subset) [PATCH v8 0/5] Add i.MX943 PCIe supports

[Manivannan Sadhasivam]

On Tue, 24 Mar 2026 10:30:31 +0800, Richard Zhu wrote:
> This patch-set adds i.MX943 PCIe supports on EVK board. Please pay
> attention to that it relies on the patch-set[1], and the PCIe1 port on
> the EVK board relies on the [2].
> 
> Both of them are included in the v7.0 kernel.
> [1] https://lore.kernel.org/imx/176649331066.523506.9443864112044699350.b4-ty@kernel.org/
> [2] https://lore.kernel.org/imx/inzg46tc2fwsajxq4vzdyuiq7krzy6xtcg2mjaieninz7zsmgm@mtdjr4tuegpq/
> 
> [...]

Applied, thanks!

[1/5] dt-bindings: PCI: imx6q-pcie: Change maxItems of clocks and clock-names to 6
      commit: 401359ef44af43b6b775dc01bb7b31396db67aab
[2/5] dt-bindings: PCI: imx6q-pcie: Add i.MX94 and i.MX943 PCIe compatible strings
      commit: 4d7937d8cc32b027a14cb8152d9df64d17e9392c

Best regards,
-- 
Manivannan Sadhasivam <mani@kernel.org>