Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: phucduc.bui@gmail.com
To: Mark Brown <broonie@kernel.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>,
	Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>,
	Shengjiu Wang <shengjiu.wang@gmail.com>,
	Xiubo Li <Xiubo.Lee@gmail.com>, Frank Li <Frank.Li@nxp.com>,
	Fabio Estevam <festevam@gmail.com>,
	Nicolin Chen <nicoleotsuka@gmail.com>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	linux-sound@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, imx@lists.linux.dev,
	linuxppc-dev@lists.ozlabs.org,
	bui duc phuc <phucduc.bui@gmail.com>
Subject: [PATCH 10/11] ASoC: fsl: mpc5200_dma: Use guard() for spin locks
Date: Fri, 12 Jun 2026 20:26:38 +0700	[thread overview]
Message-ID: <20260612132639.78086-11-phucduc.bui@gmail.com> (raw)
In-Reply-To: <20260612132639.78086-1-phucduc.bui@gmail.com>

From: bui duc phuc <phucduc.bui@gmail.com>

Clean up the code using guard() for spin locks.
Merely code refactoring, and no behavior change.

Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
---
 sound/soc/fsl/mpc5200_dma.c | 56 ++++++++++++++++++-------------------
 1 file changed, 28 insertions(+), 28 deletions(-)

diff --git a/sound/soc/fsl/mpc5200_dma.c b/sound/soc/fsl/mpc5200_dma.c
index 56e2cf2f727b..bfedb2dea0b3 100644
--- a/sound/soc/fsl/mpc5200_dma.c
+++ b/sound/soc/fsl/mpc5200_dma.c
@@ -77,18 +77,20 @@ static irqreturn_t psc_dma_bcom_irq(int irq, void *_psc_dma_stream)
 {
 	struct psc_dma_stream *s = _psc_dma_stream;
 
-	spin_lock(&s->psc_dma->lock);
-	/* For each finished period, dequeue the completed period buffer
-	 * and enqueue a new one in it's place. */
-	while (bcom_buffer_done(s->bcom_task)) {
-		bcom_retrieve_buffer(s->bcom_task, NULL, NULL);
+	scoped_guard(spinlock, &s->psc_dma->lock) {
+		/*
+		 * For each finished period, dequeue the completed period buffer
+		 * and enqueue a new one in its place
+		 */
+		while (bcom_buffer_done(s->bcom_task)) {
+			bcom_retrieve_buffer(s->bcom_task, NULL, NULL);
 
-		s->period_current = (s->period_current+1) % s->runtime->periods;
-		s->period_count++;
+			s->period_current = (s->period_current+1) % s->runtime->periods;
+			s->period_count++;
 
-		psc_dma_bcom_enqueue_next_buffer(s);
+			psc_dma_bcom_enqueue_next_buffer(s);
+		}
 	}
-	spin_unlock(&s->psc_dma->lock);
 
 	/* If the stream is active, then also inform the PCM middle layer
 	 * of the period finished event. */
@@ -116,7 +118,6 @@ static int psc_dma_trigger(struct snd_soc_component *component,
 	struct psc_dma_stream *s = to_psc_dma_stream(substream, psc_dma);
 	struct mpc52xx_psc __iomem *regs = psc_dma->psc_regs;
 	u16 imr;
-	unsigned long flags;
 	int i;
 
 	switch (cmd) {
@@ -135,19 +136,18 @@ static int psc_dma_trigger(struct snd_soc_component *component,
 		/* Fill up the bestcomm bd queue and enable DMA.
 		 * This will begin filling the PSC's fifo.
 		 */
-		spin_lock_irqsave(&psc_dma->lock, flags);
-
-		if (substream->pstr->stream == SNDRV_PCM_STREAM_CAPTURE)
-			bcom_gen_bd_rx_reset(s->bcom_task);
-		else
-			bcom_gen_bd_tx_reset(s->bcom_task);
+		scoped_guard(spinlock_irqsave, &psc_dma->lock) {
+			if (substream->pstr->stream == SNDRV_PCM_STREAM_CAPTURE)
+				bcom_gen_bd_rx_reset(s->bcom_task);
+			else
+				bcom_gen_bd_tx_reset(s->bcom_task);
 
-		for (i = 0; i < runtime->periods; i++)
-			if (!bcom_queue_full(s->bcom_task))
-				psc_dma_bcom_enqueue_next_buffer(s);
+			for (i = 0; i < runtime->periods; i++)
+				if (!bcom_queue_full(s->bcom_task))
+					psc_dma_bcom_enqueue_next_buffer(s);
 
-		bcom_enable(s->bcom_task);
-		spin_unlock_irqrestore(&psc_dma->lock, flags);
+			bcom_enable(s->bcom_task);
+		}
 
 		out_8(&regs->command, MPC52xx_PSC_RST_ERR_STAT);
 
@@ -158,13 +158,13 @@ static int psc_dma_trigger(struct snd_soc_component *component,
 			substream->pstr->stream, s->period_count);
 		s->active = 0;
 
-		spin_lock_irqsave(&psc_dma->lock, flags);
-		bcom_disable(s->bcom_task);
-		if (substream->pstr->stream == SNDRV_PCM_STREAM_CAPTURE)
-			bcom_gen_bd_rx_reset(s->bcom_task);
-		else
-			bcom_gen_bd_tx_reset(s->bcom_task);
-		spin_unlock_irqrestore(&psc_dma->lock, flags);
+		scoped_guard(spinlock_irqsave, &psc_dma->lock) {
+			bcom_disable(s->bcom_task);
+			if (substream->pstr->stream == SNDRV_PCM_STREAM_CAPTURE)
+				bcom_gen_bd_rx_reset(s->bcom_task);
+			else
+				bcom_gen_bd_tx_reset(s->bcom_task);
+		}
 
 		break;
 
-- 
2.43.0



  parent reply	other threads:[~2026-06-12 13:28 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-06-12 13:26 [PATCH 00/11] ASoC: fsl: Use guard() for mutex & spin locks phucduc.bui
2026-06-12 13:26 ` [PATCH 01/11] ASoC: fsl_asrc: Use guard() for " phucduc.bui
2026-06-12 13:26 ` [PATCH 02/11] ASoC: fsl_audmix: " phucduc.bui
2026-06-12 13:26 ` [PATCH 03/11] ASoC: fsl_easrc: " phucduc.bui
2026-06-12 13:26 ` [PATCH 04/11] ASoC: fsl_esai: " phucduc.bui
2026-06-12 13:26 ` [PATCH 05/11] ASoC: fsl_spdif: " phucduc.bui
2026-06-12 13:26 ` [PATCH 06/11] ASoC: fsl_ssi: Use guard() for mutex locks phucduc.bui
2026-06-12 13:26 ` [PATCH 07/11] ASoC: fsl_xcvr: Use guard() for spin locks phucduc.bui
2026-06-12 13:26 ` [PATCH 08/11] ASoC: imx-audio-rpmsg: " phucduc.bui
2026-06-12 13:26 ` [PATCH 09/11] ASoC: fsl_rpmsg: Use guard() for mutex & " phucduc.bui
2026-06-12 13:26 ` phucduc.bui [this message]
2026-06-12 13:26 ` [PATCH 11/11] ASoC: fsl: mpc5200_psc_ac97: Use guard() for mutex locks phucduc.bui
2026-06-12 15:05   ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260612132639.78086-11-phucduc.bui@gmail.com \
    --to=phucduc.bui@gmail.com \
    --cc=Frank.Li@nxp.com \
    --cc=Xiubo.Lee@gmail.com \
    --cc=broonie@kernel.org \
    --cc=festevam@gmail.com \
    --cc=imx@lists.linux.dev \
    --cc=kernel@pengutronix.de \
    --cc=lgirdwood@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sound@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=nicoleotsuka@gmail.com \
    --cc=perex@perex.cz \
    --cc=s.hauer@pengutronix.de \
    --cc=shengjiu.wang@gmail.com \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox