From: phucduc.bui@gmail.com
To: Mark Brown <broonie@kernel.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>,
Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>,
Shengjiu Wang <shengjiu.wang@gmail.com>,
Xiubo Li <Xiubo.Lee@gmail.com>, Frank Li <Frank.Li@nxp.com>,
Fabio Estevam <festevam@gmail.com>,
Nicolin Chen <nicoleotsuka@gmail.com>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
linux-sound@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, imx@lists.linux.dev,
linuxppc-dev@lists.ozlabs.org,
bui duc phuc <phucduc.bui@gmail.com>
Subject: [PATCH 07/11] ASoC: fsl_xcvr: Use guard() for spin locks
Date: Fri, 12 Jun 2026 20:26:35 +0700 [thread overview]
Message-ID: <20260612132639.78086-8-phucduc.bui@gmail.com> (raw)
In-Reply-To: <20260612132639.78086-1-phucduc.bui@gmail.com>
From: bui duc phuc <phucduc.bui@gmail.com>
Clean up the code using guard() for spin locks.
Merely code refactoring, and no behavior change.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
---
sound/soc/fsl/fsl_xcvr.c | 29 ++++++++++++-----------------
1 file changed, 12 insertions(+), 17 deletions(-)
diff --git a/sound/soc/fsl/fsl_xcvr.c b/sound/soc/fsl/fsl_xcvr.c
index 6677d3bf36ec..41d100500534 100644
--- a/sound/soc/fsl/fsl_xcvr.c
+++ b/sound/soc/fsl/fsl_xcvr.c
@@ -797,10 +797,9 @@ static int fsl_xcvr_trigger(struct snd_pcm_substream *substream, int cmd,
{
struct fsl_xcvr *xcvr = snd_soc_dai_get_drvdata(dai);
bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
- unsigned long lock_flags;
int ret = 0;
- spin_lock_irqsave(&xcvr->lock, lock_flags);
+ guard(spinlock_irqsave)(&xcvr->lock);
switch (cmd) {
case SNDRV_PCM_TRIGGER_START:
@@ -812,7 +811,7 @@ static int fsl_xcvr_trigger(struct snd_pcm_substream *substream, int cmd,
FSL_XCVR_EXT_CTRL_DPTH_RESET(tx));
if (ret < 0) {
dev_err(dai->dev, "Failed to set DPATH RESET: %d\n", ret);
- goto release_lock;
+ return ret;
}
if (tx) {
@@ -824,7 +823,7 @@ static int fsl_xcvr_trigger(struct snd_pcm_substream *substream, int cmd,
FSL_XCVR_ISR_CMDC_TX_EN);
if (ret < 0) {
dev_err(dai->dev, "err updating isr %d\n", ret);
- goto release_lock;
+ return ret;
}
fallthrough;
case FSL_XCVR_MODE_SPDIF:
@@ -833,7 +832,7 @@ static int fsl_xcvr_trigger(struct snd_pcm_substream *substream, int cmd,
FSL_XCVR_TX_DPTH_CTRL_STRT_DATA_TX);
if (ret < 0) {
dev_err(dai->dev, "Failed to start DATA_TX: %d\n", ret);
- goto release_lock;
+ return ret;
}
break;
}
@@ -844,14 +843,14 @@ static int fsl_xcvr_trigger(struct snd_pcm_substream *substream, int cmd,
FSL_XCVR_EXT_CTRL_DMA_DIS(tx), 0);
if (ret < 0) {
dev_err(dai->dev, "Failed to enable DMA: %d\n", ret);
- goto release_lock;
+ return ret;
}
ret = regmap_update_bits(xcvr->regmap, FSL_XCVR_EXT_IER0,
FSL_XCVR_IRQ_EARC_ALL, FSL_XCVR_IRQ_EARC_ALL);
if (ret < 0) {
dev_err(dai->dev, "Error while setting IER0: %d\n", ret);
- goto release_lock;
+ return ret;
}
/* clear DPATH RESET */
@@ -860,7 +859,7 @@ static int fsl_xcvr_trigger(struct snd_pcm_substream *substream, int cmd,
0);
if (ret < 0) {
dev_err(dai->dev, "Failed to clear DPATH RESET: %d\n", ret);
- goto release_lock;
+ return ret;
}
break;
@@ -873,14 +872,14 @@ static int fsl_xcvr_trigger(struct snd_pcm_substream *substream, int cmd,
FSL_XCVR_EXT_CTRL_DMA_DIS(tx));
if (ret < 0) {
dev_err(dai->dev, "Failed to disable DMA: %d\n", ret);
- goto release_lock;
+ return ret;
}
ret = regmap_update_bits(xcvr->regmap, FSL_XCVR_EXT_IER0,
FSL_XCVR_IRQ_EARC_ALL, 0);
if (ret < 0) {
dev_err(dai->dev, "Failed to clear IER0: %d\n", ret);
- goto release_lock;
+ return ret;
}
if (tx) {
@@ -891,7 +890,7 @@ static int fsl_xcvr_trigger(struct snd_pcm_substream *substream, int cmd,
FSL_XCVR_TX_DPTH_CTRL_STRT_DATA_TX);
if (ret < 0) {
dev_err(dai->dev, "Failed to stop DATA_TX: %d\n", ret);
- goto release_lock;
+ return ret;
}
if (xcvr->soc_data->spdif_only)
break;
@@ -905,7 +904,7 @@ static int fsl_xcvr_trigger(struct snd_pcm_substream *substream, int cmd,
if (ret < 0) {
dev_err(dai->dev,
"Err updating ISR %d\n", ret);
- goto release_lock;
+ return ret;
}
break;
}
@@ -916,8 +915,6 @@ static int fsl_xcvr_trigger(struct snd_pcm_substream *substream, int cmd,
break;
}
-release_lock:
- spin_unlock_irqrestore(&xcvr->lock, lock_flags);
return ret;
}
@@ -1448,11 +1445,10 @@ static void reset_rx_work(struct work_struct *work)
{
struct fsl_xcvr *xcvr = container_of(work, struct fsl_xcvr, work_rst);
struct device *dev = &xcvr->pdev->dev;
- unsigned long lock_flags;
u32 ext_ctrl;
dev_dbg(dev, "reset rx path\n");
- spin_lock_irqsave(&xcvr->lock, lock_flags);
+ guard(spinlock_irqsave)(&xcvr->lock);
regmap_read(xcvr->regmap, FSL_XCVR_EXT_CTRL, &ext_ctrl);
if (!(ext_ctrl & FSL_XCVR_EXT_CTRL_DMA_RD_DIS)) {
@@ -1469,7 +1465,6 @@ static void reset_rx_work(struct work_struct *work)
FSL_XCVR_EXT_CTRL_RX_DPTH_RESET,
0);
}
- spin_unlock_irqrestore(&xcvr->lock, lock_flags);
}
static irqreturn_t irq0_isr(int irq, void *devid)
--
2.43.0
next prev parent reply other threads:[~2026-06-12 13:27 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-12 13:26 [PATCH 00/11] ASoC: fsl: Use guard() for mutex & spin locks phucduc.bui
2026-06-12 13:26 ` [PATCH 01/11] ASoC: fsl_asrc: Use guard() for " phucduc.bui
2026-06-12 13:26 ` [PATCH 02/11] ASoC: fsl_audmix: " phucduc.bui
2026-06-12 13:26 ` [PATCH 03/11] ASoC: fsl_easrc: " phucduc.bui
2026-06-12 13:26 ` [PATCH 04/11] ASoC: fsl_esai: " phucduc.bui
2026-06-12 13:26 ` [PATCH 05/11] ASoC: fsl_spdif: " phucduc.bui
2026-06-12 13:26 ` [PATCH 06/11] ASoC: fsl_ssi: Use guard() for mutex locks phucduc.bui
2026-06-12 13:26 ` phucduc.bui [this message]
2026-06-12 13:26 ` [PATCH 08/11] ASoC: imx-audio-rpmsg: Use guard() for spin locks phucduc.bui
2026-06-12 13:26 ` [PATCH 09/11] ASoC: fsl_rpmsg: Use guard() for mutex & " phucduc.bui
2026-06-12 13:26 ` [PATCH 10/11] ASoC: fsl: mpc5200_dma: Use guard() for " phucduc.bui
2026-06-12 13:26 ` [PATCH 11/11] ASoC: fsl: mpc5200_psc_ac97: Use guard() for mutex locks phucduc.bui
2026-06-12 15:05 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260612132639.78086-8-phucduc.bui@gmail.com \
--to=phucduc.bui@gmail.com \
--cc=Frank.Li@nxp.com \
--cc=Xiubo.Lee@gmail.com \
--cc=broonie@kernel.org \
--cc=festevam@gmail.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=nicoleotsuka@gmail.com \
--cc=perex@perex.cz \
--cc=s.hauer@pengutronix.de \
--cc=shengjiu.wang@gmail.com \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox