From: phucduc.bui@gmail.com
To: Mark Brown <broonie@kernel.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>,
Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>,
Shengjiu Wang <shengjiu.wang@gmail.com>,
Xiubo Li <Xiubo.Lee@gmail.com>, Frank Li <Frank.Li@nxp.com>,
Fabio Estevam <festevam@gmail.com>,
Nicolin Chen <nicoleotsuka@gmail.com>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
linux-sound@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, imx@lists.linux.dev,
linuxppc-dev@lists.ozlabs.org,
bui duc phuc <phucduc.bui@gmail.com>
Subject: [PATCH 04/11] ASoC: fsl_esai: Use guard() for spin locks
Date: Fri, 12 Jun 2026 20:26:32 +0700 [thread overview]
Message-ID: <20260612132639.78086-5-phucduc.bui@gmail.com> (raw)
In-Reply-To: <20260612132639.78086-1-phucduc.bui@gmail.com>
From: bui duc phuc <phucduc.bui@gmail.com>
Clean up the code using guard() for spin locks.
Merely code refactoring, and no behavior change.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
---
sound/soc/fsl/fsl_esai.c | 16 +++++-----------
1 file changed, 5 insertions(+), 11 deletions(-)
diff --git a/sound/soc/fsl/fsl_esai.c b/sound/soc/fsl/fsl_esai.c
index cde0b0c6c1ef..4a530a6c33f0 100644
--- a/sound/soc/fsl/fsl_esai.c
+++ b/sound/soc/fsl/fsl_esai.c
@@ -709,10 +709,9 @@ static void fsl_esai_hw_reset(struct work_struct *work)
{
struct fsl_esai *esai_priv = container_of(work, struct fsl_esai, work);
bool tx = true, rx = false, enabled[2];
- unsigned long lock_flags;
u32 tfcr, rfcr;
- spin_lock_irqsave(&esai_priv->lock, lock_flags);
+ guard(spinlock_irqsave)(&esai_priv->lock);
/* Save the registers */
regmap_read(esai_priv->regmap, REG_ESAI_TFCR, &tfcr);
regmap_read(esai_priv->regmap, REG_ESAI_RFCR, &rfcr);
@@ -750,8 +749,6 @@ static void fsl_esai_hw_reset(struct work_struct *work)
fsl_esai_trigger_start(esai_priv, tx);
if (enabled[rx])
fsl_esai_trigger_start(esai_priv, rx);
-
- spin_unlock_irqrestore(&esai_priv->lock, lock_flags);
}
static int fsl_esai_trigger(struct snd_pcm_substream *substream, int cmd,
@@ -759,7 +756,6 @@ static int fsl_esai_trigger(struct snd_pcm_substream *substream, int cmd,
{
struct fsl_esai *esai_priv = snd_soc_dai_get_drvdata(dai);
bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
- unsigned long lock_flags;
esai_priv->channels[tx] = substream->runtime->channels;
@@ -767,16 +763,14 @@ static int fsl_esai_trigger(struct snd_pcm_substream *substream, int cmd,
case SNDRV_PCM_TRIGGER_START:
case SNDRV_PCM_TRIGGER_RESUME:
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
- spin_lock_irqsave(&esai_priv->lock, lock_flags);
- fsl_esai_trigger_start(esai_priv, tx);
- spin_unlock_irqrestore(&esai_priv->lock, lock_flags);
+ scoped_guard(spinlock_irqsave, &esai_priv->lock)
+ fsl_esai_trigger_start(esai_priv, tx);
break;
case SNDRV_PCM_TRIGGER_SUSPEND:
case SNDRV_PCM_TRIGGER_STOP:
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
- spin_lock_irqsave(&esai_priv->lock, lock_flags);
- fsl_esai_trigger_stop(esai_priv, tx);
- spin_unlock_irqrestore(&esai_priv->lock, lock_flags);
+ scoped_guard(spinlock_irqsave, &esai_priv->lock)
+ fsl_esai_trigger_stop(esai_priv, tx);
break;
default:
return -EINVAL;
--
2.43.0
next prev parent reply other threads:[~2026-06-12 13:27 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-12 13:26 [PATCH 00/11] ASoC: fsl: Use guard() for mutex & spin locks phucduc.bui
2026-06-12 13:26 ` [PATCH 01/11] ASoC: fsl_asrc: Use guard() for " phucduc.bui
2026-06-12 13:26 ` [PATCH 02/11] ASoC: fsl_audmix: " phucduc.bui
2026-06-12 13:26 ` [PATCH 03/11] ASoC: fsl_easrc: " phucduc.bui
2026-06-12 13:26 ` phucduc.bui [this message]
2026-06-12 13:26 ` [PATCH 05/11] ASoC: fsl_spdif: " phucduc.bui
2026-06-12 13:26 ` [PATCH 06/11] ASoC: fsl_ssi: Use guard() for mutex locks phucduc.bui
2026-06-12 13:26 ` [PATCH 07/11] ASoC: fsl_xcvr: Use guard() for spin locks phucduc.bui
2026-06-12 13:26 ` [PATCH 08/11] ASoC: imx-audio-rpmsg: " phucduc.bui
2026-06-12 13:26 ` [PATCH 09/11] ASoC: fsl_rpmsg: Use guard() for mutex & " phucduc.bui
2026-06-12 13:26 ` [PATCH 10/11] ASoC: fsl: mpc5200_dma: Use guard() for " phucduc.bui
2026-06-12 13:26 ` [PATCH 11/11] ASoC: fsl: mpc5200_psc_ac97: Use guard() for mutex locks phucduc.bui
2026-06-12 15:05 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260612132639.78086-5-phucduc.bui@gmail.com \
--to=phucduc.bui@gmail.com \
--cc=Frank.Li@nxp.com \
--cc=Xiubo.Lee@gmail.com \
--cc=broonie@kernel.org \
--cc=festevam@gmail.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=nicoleotsuka@gmail.com \
--cc=perex@perex.cz \
--cc=s.hauer@pengutronix.de \
--cc=shengjiu.wang@gmail.com \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox