From: "Sherry Sun (OSS)" <sherry.sun@oss.nxp.com>
To: robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org,
Frank.Li@nxp.com, s.hauer@pengutronix.de, kernel@pengutronix.de,
festevam@gmail.com, amitkumar.karwar@nxp.com,
neeraj.sanjaykale@nxp.com, marcel@holtmann.org,
luiz.dentz@gmail.com, hongxing.zhu@nxp.com,
l.stach@pengutronix.de, lpieralisi@kernel.org,
kwilczynski@kernel.org, mani@kernel.org, bhelgaas@google.com,
brgl@kernel.org
Cc: imx@lists.linux.dev, linux-pci@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-bluetooth@vger.kernel.org,
linux-pm@vger.kernel.org, sherry.sun@nxp.com
Subject: [PATCH V4 0/8] Add PCIe M.2 Key E connector support for NXP i.MX boards
Date: Tue, 30 Jun 2026 18:31:31 +0800 [thread overview]
Message-ID: <20260630103139.3823329-1-sherry.sun@oss.nxp.com> (raw)
From: Sherry Sun <sherry.sun@nxp.com>
This series adds support for NXP Wi-Fi/BT combo chips (88W9098, AW693)
inserted into PCIe M.2 Key E connectors on several i.MX EVK/MEK boards.
For M.2 cards that rely on PCIe L2 link state and wake-up mechanisms, the
card must remain powered during suspend. Patch #1 uses the existing
dw_pcie_rp::skip_pwrctrl_off flag to skip power-off during suspend and skip
power-on during the init path.
Also the btnxpuart driver is extended to obtain a pwrseq descriptor via the
OF graph on the UART controller device in patch #3.
Note: Patch #4-8 in this patch set depends on the following [1] and [2]
DTS patches.
[1] https://lore.kernel.org/all/20260616105201.3214395-1-sherry.sun@oss.nxp.com/
[2] https://lore.kernel.org/all/20260630060710.3294811-1-sherry.sun@oss.nxp.com/
---
Changes in V4:
1. Add a seperate patch to move pci_pwrctrl_create_devices() to
imx_pcie_probe() as suggested by Frank.
2. Rebase the dts patches based on [2] patchset.
3. Drop pwrseq-pcie-m2 ID patch as it got applied.
Changes in V3:
1. Move pci_pwrctrl_create_devices() to imx_pcie_probe() in parch #1,
similar to other regulator_get calls as suggested by Frank.
2. Collected the tags.
Changes in V2:
1. Rebased on top of 7.1.0.
2. Removed the power_off error handling in patch #3 because pwrseq_put()
would call pwrseq_power_off() to automatically clean.
3. Collected the tags.
---
Sherry Sun (8):
PCI: imx6: Move pci_pwrctrl_create_devices() to imx_pcie_probe()
PCI: imx6: Add skip_pwrctrl_off flag support
Bluetooth: btnxpuart: Add M.2 Bluetooth device support using pwrseq
arm64: dts: imx8mq-evk: Describe the PCIe M.2 Key E connector
arm64: dts: imx95-19x19-evk: Describe the PCIe M.2 Key E connector
arm64: dts: imx8dxl-evk: Describe the PCIe M.2 Key E connector
arm64: dts: imx8qm-mek: Describe the PCIe M.2 Key E connector
arm64: dts: imx8qxp-mek: Describe the PCIe M.2 Key E connector
arch/arm64/boot/dts/freescale/imx8dxl-evk.dts | 56 +++++++++++++-----
arch/arm64/boot/dts/freescale/imx8mq-evk.dts | 44 ++++++++++++--
arch/arm64/boot/dts/freescale/imx8qm-mek.dts | 58 ++++++++++++++-----
arch/arm64/boot/dts/freescale/imx8qxp-mek.dts | 54 ++++++++++++-----
.../boot/dts/freescale/imx95-19x19-evk.dts | 55 +++++++++++++-----
drivers/bluetooth/btnxpuart.c | 14 +++++
drivers/pci/controller/dwc/pci-imx6.c | 43 ++++++++------
7 files changed, 246 insertions(+), 78 deletions(-)
--
2.50.1
next reply other threads:[~2026-06-30 10:30 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-30 10:31 Sherry Sun (OSS) [this message]
2026-06-30 10:31 ` [PATCH V4 1/8] PCI: imx6: Move pci_pwrctrl_create_devices() to imx_pcie_probe() Sherry Sun (OSS)
2026-06-30 17:37 ` Bjorn Helgaas
2026-07-01 2:08 ` Sherry Sun
2026-06-30 10:31 ` [PATCH V4 2/8] PCI: imx6: Add skip_pwrctrl_off flag support Sherry Sun (OSS)
2026-06-30 17:43 ` Bjorn Helgaas
2026-07-01 2:21 ` Sherry Sun
2026-06-30 10:31 ` [PATCH V4 3/8] Bluetooth: btnxpuart: Add M.2 Bluetooth device support using pwrseq Sherry Sun (OSS)
2026-06-30 10:31 ` [PATCH V4 4/8] arm64: dts: imx8mq-evk: Describe the PCIe M.2 Key E connector Sherry Sun (OSS)
2026-06-30 10:31 ` [PATCH V4 5/8] arm64: dts: imx95-19x19-evk: " Sherry Sun (OSS)
2026-06-30 10:31 ` [PATCH V4 6/8] arm64: dts: imx8dxl-evk: " Sherry Sun (OSS)
2026-06-30 10:31 ` [PATCH V4 7/8] arm64: dts: imx8qm-mek: " Sherry Sun (OSS)
2026-06-30 10:31 ` [PATCH V4 8/8] arm64: dts: imx8qxp-mek: " Sherry Sun (OSS)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260630103139.3823329-1-sherry.sun@oss.nxp.com \
--to=sherry.sun@oss.nxp.com \
--cc=Frank.Li@nxp.com \
--cc=amitkumar.karwar@nxp.com \
--cc=bhelgaas@google.com \
--cc=brgl@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=hongxing.zhu@nxp.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=krzk+dt@kernel.org \
--cc=kwilczynski@kernel.org \
--cc=l.stach@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-bluetooth@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=lpieralisi@kernel.org \
--cc=luiz.dentz@gmail.com \
--cc=mani@kernel.org \
--cc=marcel@holtmann.org \
--cc=neeraj.sanjaykale@nxp.com \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=sherry.sun@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox