From: "Sherry Sun (OSS)" <sherry.sun@oss.nxp.com>
To: robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org,
Frank.Li@nxp.com, s.hauer@pengutronix.de, kernel@pengutronix.de,
festevam@gmail.com, amitkumar.karwar@nxp.com,
neeraj.sanjaykale@nxp.com, marcel@holtmann.org,
luiz.dentz@gmail.com, hongxing.zhu@nxp.com,
l.stach@pengutronix.de, lpieralisi@kernel.org,
kwilczynski@kernel.org, mani@kernel.org, bhelgaas@google.com,
brgl@kernel.org
Cc: imx@lists.linux.dev, linux-pci@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-bluetooth@vger.kernel.org,
linux-pm@vger.kernel.org, sherry.sun@nxp.com
Subject: [PATCH V4 4/8] arm64: dts: imx8mq-evk: Describe the PCIe M.2 Key E connector
Date: Tue, 30 Jun 2026 18:31:35 +0800 [thread overview]
Message-ID: <20260630103139.3823329-5-sherry.sun@oss.nxp.com> (raw)
In-Reply-To: <20260630103139.3823329-1-sherry.sun@oss.nxp.com>
From: Sherry Sun <sherry.sun@nxp.com>
The i.MX8MQ-EVK has the PCIe M.2 Mechanical Key E connector to connect
wireless connectivity cards over PCIe and UART interfaces. Hence,
describe the connector node and link it with the PCIe 1 Root Port and
UART3 nodes through graph port/endpoint.
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
---
arch/arm64/boot/dts/freescale/imx8mq-evk.dts | 44 ++++++++++++++++++--
1 file changed, 40 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
index 383a0976d457..482e5203e879 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
@@ -21,6 +21,36 @@ memory@40000000 {
reg = <0x00000000 0x40000000 0 0xc0000000>;
};
+ m2-connector {
+ compatible = "pcie-m2-e-connector";
+ vpcie3v3-supply = <®_pcie1>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ m2_e_pcie_ep: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&pcie1_port0_ep>;
+ };
+ };
+
+ port@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ m2_e_uart_ep: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&uart3_ep>;
+ };
+ };
+ };
+ };
+
pcie0_refclk: pcie0-refclk {
compatible = "fixed-clock";
#clock-cells = <0>;
@@ -420,8 +450,12 @@ &pcie1_ep {
&pcie1_port0 {
reset-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
- vpcie3v3-supply = <®_pcie1>;
- vpcie3v3aux-supply = <®_pcie1>;
+
+ port {
+ pcie1_port0_ep: endpoint {
+ remote-endpoint = <&m2_e_pcie_ep>;
+ };
+ };
};
&pgc_gpu {
@@ -506,8 +540,10 @@ &uart3 { /* BT */
uart-has-rtscts;
status = "okay";
- bluetooth {
- compatible = "nxp,88w8987-bt";
+ port {
+ uart3_ep: endpoint {
+ remote-endpoint = <&m2_e_uart_ep>;
+ };
};
};
--
2.50.1
next prev parent reply other threads:[~2026-06-30 10:31 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-30 10:31 [PATCH V4 0/8] Add PCIe M.2 Key E connector support for NXP i.MX boards Sherry Sun (OSS)
2026-06-30 10:31 ` [PATCH V4 1/8] PCI: imx6: Move pci_pwrctrl_create_devices() to imx_pcie_probe() Sherry Sun (OSS)
2026-06-30 17:37 ` Bjorn Helgaas
2026-07-01 2:08 ` Sherry Sun
2026-06-30 10:31 ` [PATCH V4 2/8] PCI: imx6: Add skip_pwrctrl_off flag support Sherry Sun (OSS)
2026-06-30 17:43 ` Bjorn Helgaas
2026-07-01 2:21 ` Sherry Sun
2026-06-30 10:31 ` [PATCH V4 3/8] Bluetooth: btnxpuart: Add M.2 Bluetooth device support using pwrseq Sherry Sun (OSS)
2026-06-30 10:31 ` Sherry Sun (OSS) [this message]
2026-06-30 10:31 ` [PATCH V4 5/8] arm64: dts: imx95-19x19-evk: Describe the PCIe M.2 Key E connector Sherry Sun (OSS)
2026-06-30 10:31 ` [PATCH V4 6/8] arm64: dts: imx8dxl-evk: " Sherry Sun (OSS)
2026-06-30 10:31 ` [PATCH V4 7/8] arm64: dts: imx8qm-mek: " Sherry Sun (OSS)
2026-06-30 10:31 ` [PATCH V4 8/8] arm64: dts: imx8qxp-mek: " Sherry Sun (OSS)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260630103139.3823329-5-sherry.sun@oss.nxp.com \
--to=sherry.sun@oss.nxp.com \
--cc=Frank.Li@nxp.com \
--cc=amitkumar.karwar@nxp.com \
--cc=bhelgaas@google.com \
--cc=brgl@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=hongxing.zhu@nxp.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=krzk+dt@kernel.org \
--cc=kwilczynski@kernel.org \
--cc=l.stach@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-bluetooth@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=lpieralisi@kernel.org \
--cc=luiz.dentz@gmail.com \
--cc=mani@kernel.org \
--cc=marcel@holtmann.org \
--cc=neeraj.sanjaykale@nxp.com \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=sherry.sun@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox