[PATCH V4 5/8] arm64: dts: imx95-19x19-evk: Describe the PCIe M.2 Key E connector

["Sherry Sun (OSS)" <sherry.sun@oss.nxp.com>]

From: Sherry Sun <sherry.sun@nxp.com>

The i.MX95-19x19-EVK has the PCIe M.2 Mechanical Key E connector to
connect wireless connectivity cards over PCIe and UART interfaces. Hence,
describe the connector node and link it with the PCIe 0 Root Port and
LPUART5 nodes through graph port/endpoint.

Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
---
 .../boot/dts/freescale/imx95-19x19-evk.dts    | 55 ++++++++++++++-----
 1 file changed, 41 insertions(+), 14 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts b/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
index 340ab0253ec2..1ed1a8282edc 100644
--- a/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
@@ -57,6 +57,37 @@ memory@80000000 {
 		reg = <0x0 0x80000000 0 0x80000000>;
 	};
 
+	m2-connector {
+		compatible = "pcie-m2-e-connector";
+		vpcie3v3-supply = <&reg_m2_pwr>;
+		w-disable1-gpios = <&i2c7_pcal6524 6 GPIO_ACTIVE_LOW>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0>;
+				m2_e_pcie_ep: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&pcie0_port0_ep>;
+				};
+			};
+
+			port@3 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <3>;
+				m2_e_uart_ep: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&lpuart5_ep>;
+				};
+			};
+		};
+	};
+
 	fan0: pwm-fan {
 		compatible = "pwm-fan";
 		#cooling-cells = <2>;
@@ -145,16 +176,6 @@ reg_m2_pwr: regulator-m2-pwr {
 		startup-delay-us = <5000>;
 	};
 
-	reg_pcie0: regulator-pcie {
-		compatible = "regulator-fixed";
-		regulator-name = "PCIE_WLAN_EN";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&reg_m2_pwr>;
-		gpio = <&i2c7_pcal6524 6 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
 	reg_slot_pwr: regulator-slot-pwr {
 		compatible = "regulator-fixed";
 		regulator-name = "PCIe slot-power";
@@ -477,8 +498,10 @@ &lpuart5 {
 	pinctrl-0 = <&pinctrl_uart5>;
 	status = "okay";
 
-	bluetooth {
-		compatible = "nxp,88w8987-bt";
+	port {
+		lpuart5_ep: endpoint {
+			remote-endpoint = <&m2_e_uart_ep>;
+		};
 	};
 };
 
@@ -555,8 +578,12 @@ &pcie0_ep {
 
 &pcie0_port0 {
 	reset-gpios = <&i2c7_pcal6524 5 GPIO_ACTIVE_LOW>;
-	vpcie3v3-supply = <&reg_pcie0>;
-	vpcie3v3aux-supply = <&reg_pcie0>;
+
+	port {
+		pcie0_port0_ep: endpoint {
+			remote-endpoint = <&m2_e_pcie_ep>;
+		};
+	};
 };
 
 &pcie1 {
-- 
2.50.1