Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: "Sherry Sun (OSS)" <sherry.sun@oss.nxp.com>
To: robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org,
	Frank.Li@nxp.com, s.hauer@pengutronix.de, kernel@pengutronix.de,
	festevam@gmail.com, amitkumar.karwar@nxp.com,
	neeraj.sanjaykale@nxp.com, marcel@holtmann.org,
	luiz.dentz@gmail.com, hongxing.zhu@nxp.com,
	l.stach@pengutronix.de, lpieralisi@kernel.org,
	kwilczynski@kernel.org, mani@kernel.org, bhelgaas@google.com,
	brgl@kernel.org
Cc: imx@lists.linux.dev, linux-pci@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-bluetooth@vger.kernel.org,
	linux-pm@vger.kernel.org, sherry.sun@nxp.com
Subject: [PATCH V4 1/8] PCI: imx6: Move pci_pwrctrl_create_devices() to imx_pcie_probe()
Date: Tue, 30 Jun 2026 18:31:32 +0800	[thread overview]
Message-ID: <20260630103139.3823329-2-sherry.sun@oss.nxp.com> (raw)
In-Reply-To: <20260630103139.3823329-1-sherry.sun@oss.nxp.com>

From: Sherry Sun <sherry.sun@nxp.com>

Move pci_pwrctrl_create_devices() to imx_pcie_probe() so that it is only
called once during probe, similar to other regulator_get calls.

Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
---
 drivers/pci/controller/dwc/pci-imx6.c | 24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index 0fa716d1ed75..1b535bb6fd31 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -1382,16 +1382,10 @@ static int imx_pcie_host_init(struct dw_pcie_rp *pp)
 		}
 	}
 
-	ret = pci_pwrctrl_create_devices(dev);
-	if (ret) {
-		dev_err(dev, "failed to create pwrctrl devices\n");
-		goto err_reg_disable;
-	}
-
 	ret = pci_pwrctrl_power_on_devices(dev);
 	if (ret) {
 		dev_err(dev, "failed to power on pwrctrl devices\n");
-		goto err_pwrctrl_destroy;
+		goto err_reg_disable;
 	}
 
 	ret = imx_pcie_clk_enable(imx_pcie);
@@ -1461,9 +1455,6 @@ static int imx_pcie_host_init(struct dw_pcie_rp *pp)
 	imx_pcie_clk_disable(imx_pcie);
 err_pwrctrl_power_off:
 	pci_pwrctrl_power_off_devices(dev);
-err_pwrctrl_destroy:
-	if (ret != -EPROBE_DEFER)
-		pci_pwrctrl_destroy_devices(dev);
 err_reg_disable:
 	if (imx_pcie->vpcie)
 		regulator_disable(imx_pcie->vpcie);
@@ -1954,11 +1945,15 @@ static int imx_pcie_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
+	ret = pci_pwrctrl_create_devices(dev);
+	if (ret)
+		return dev_err_probe(dev, ret, "failed to create pwrctrl devices\n");
+
 	pci->use_parent_dt_ranges = true;
 	if (imx_pcie->drvdata->mode == DW_PCIE_EP_TYPE) {
 		ret = imx_add_pcie_ep(imx_pcie, pdev);
 		if (ret < 0)
-			return ret;
+			goto err_pwrctrl_destroy;
 
 		/*
 		 * FIXME: Only single Device (EPF) is supported due to the
@@ -1973,7 +1968,7 @@ static int imx_pcie_probe(struct platform_device *pdev)
 		pci->pp.use_atu_msg = true;
 		ret = dw_pcie_host_init(&pci->pp);
 		if (ret < 0)
-			return ret;
+			goto err_pwrctrl_destroy;
 
 		if (pci_msi_enabled()) {
 			u8 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_MSI);
@@ -1985,6 +1980,11 @@ static int imx_pcie_probe(struct platform_device *pdev)
 	}
 
 	return 0;
+
+err_pwrctrl_destroy:
+	if (ret != -EPROBE_DEFER)
+		pci_pwrctrl_destroy_devices(dev);
+	return ret;
 }
 
 static void imx_pcie_shutdown(struct platform_device *pdev)
-- 
2.50.1



  reply	other threads:[~2026-06-30 10:30 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-06-30 10:31 [PATCH V4 0/8] Add PCIe M.2 Key E connector support for NXP i.MX boards Sherry Sun (OSS)
2026-06-30 10:31 ` Sherry Sun (OSS) [this message]
2026-06-30 17:37   ` [PATCH V4 1/8] PCI: imx6: Move pci_pwrctrl_create_devices() to imx_pcie_probe() Bjorn Helgaas
2026-07-01  2:08     ` Sherry Sun
2026-06-30 10:31 ` [PATCH V4 2/8] PCI: imx6: Add skip_pwrctrl_off flag support Sherry Sun (OSS)
2026-06-30 17:43   ` Bjorn Helgaas
2026-07-01  2:21     ` Sherry Sun
2026-06-30 10:31 ` [PATCH V4 3/8] Bluetooth: btnxpuart: Add M.2 Bluetooth device support using pwrseq Sherry Sun (OSS)
2026-06-30 10:31 ` [PATCH V4 4/8] arm64: dts: imx8mq-evk: Describe the PCIe M.2 Key E connector Sherry Sun (OSS)
2026-06-30 10:31 ` [PATCH V4 5/8] arm64: dts: imx95-19x19-evk: " Sherry Sun (OSS)
2026-06-30 10:31 ` [PATCH V4 6/8] arm64: dts: imx8dxl-evk: " Sherry Sun (OSS)
2026-06-30 10:31 ` [PATCH V4 7/8] arm64: dts: imx8qm-mek: " Sherry Sun (OSS)
2026-06-30 10:31 ` [PATCH V4 8/8] arm64: dts: imx8qxp-mek: " Sherry Sun (OSS)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260630103139.3823329-2-sherry.sun@oss.nxp.com \
    --to=sherry.sun@oss.nxp.com \
    --cc=Frank.Li@nxp.com \
    --cc=amitkumar.karwar@nxp.com \
    --cc=bhelgaas@google.com \
    --cc=brgl@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=hongxing.zhu@nxp.com \
    --cc=imx@lists.linux.dev \
    --cc=kernel@pengutronix.de \
    --cc=krzk+dt@kernel.org \
    --cc=kwilczynski@kernel.org \
    --cc=l.stach@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-bluetooth@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=lpieralisi@kernel.org \
    --cc=luiz.dentz@gmail.com \
    --cc=mani@kernel.org \
    --cc=marcel@holtmann.org \
    --cc=neeraj.sanjaykale@nxp.com \
    --cc=robh@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=sherry.sun@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox