Re: [PATCH v2 00/24] ARM: zte: Add support for Sanechips ZX279128S and ZTE ZXHN H3600

[Agustin Santiago Isasmendi <isasmendi.agus@gmail.com>]

Hi Navid,

I have been working on the same board on my side. I applied this
series on net-next (0822d2fe3826) and RAM-booted it on my ZXHN H3600
(256 MiB). Working: SMP and CPU hotplug, clocks, all LEDs and keys,
pinctrl, both PCIe ports (MT7915 enumerates), MDIO with the ZX5201
and the internal PHYs, ethernet on lan1/wan, and nft flowtable
hardware offload including a DNAT+masquerade flow. Not tested: LAN-LAN
bridging, WiFi traffic, USB devices, flash writes.

I found two issues in the board DT and one in the PCIe PHY driver;
replied separately on 24/24 and 11/24.

Two offers:

- Clock driver: Stefan asked for it to be data-only on top of his zx
  clock framework. I have a ZX279128S driver in that form (based on
  clk-next), happy to share it for v3.

- WiFi offload: on my own driver I have the WiFi path offloaded to the
  packet processor (the IDM rings between the MT7915 and the PP).
  Would you be OK with me porting it on top of your driver, as a
  follow-up series once yours is in?

Tested-by: Agustin Santiago Isasmendi <isasmendi.agus@gmail.com>

Thanks,
Agustin