messages from 2026-07-18 03:13:26 to 2026-07-18 14:46:33 UTC [more...]
[PATCH v2 0/8] clk: sunxi-ng: Add support for Allwinner A733 CCU and PRCM
2026-07-18 14:46 UTC (3+ messages)
` [PATCH v2 3/8] clk: sunxi-ng: a733: Add PRCM CCU
[PATCH v2 0/4] ARM: dts: imx: fix ldb related CHECK_DTBS warnings
2026-07-18 14:45 UTC (5+ messages)
` [PATCH v2 1/4] dt-bindings: display: bridge: ldb: allow a single reg for fsl,imx6sx-ldb
` [PATCH v2 2/4] dt-bindings: soc: imx-iomuxc-gpr: allow bridge@18 as child node
` [PATCH v2 3/4] dt-bindings: display: lcdif: Allow display0 child node for i.MX6UL
` [PATCH v2 4/4] ARM: dts: imx6ul-tx6ul: rename disp0 to display0
[PATCH net-next] net: stmmac: Simplify ioctl handling
2026-07-18 14:38 UTC
[PATCH 0/6] Add support for Broadcom BCM2712 IOMMU driver (Raspberry Pi 5)
2026-07-18 14:32 UTC (5+ messages)
` [PATCH 5/6] iommu: Add Broadcom BCM2712 IOMMU driver
[PATCH mm-hotfixes v5 0/5] mm: fix UAF caused by race between ptdump and vmap pgtable freeing
2026-07-18 14:28 UTC (4+ messages)
` [PATCH mm-hotfixes v5 3/5] x86/mm/pat: acquire init_mm read lock on attribute change to avoid UAF
[PATCH v12 00/29] KVM: arm64: Implement support for SME
2026-07-18 14:24 UTC (7+ messages)
` [PATCH v12 02/29] arm64/fpsimd: Update FA64 and ZT0 enables when loading SME state
[PATCH v2 1/1] dt-bindings: soc: imx-iomuxc-gpr: allow bridge@18 as child node
2026-07-18 14:12 UTC (3+ messages)
[PATCH] Bluetooth: hci_bcm4377: Use named initializers for pci_device_id array
2026-07-18 14:08 UTC (5+ messages)
[PATCH v4 0/2] iio: adc: Add Axiado SARADC driver
2026-07-18 13:51 UTC (3+ messages)
` [PATCH v4 2/2] iio: adc: add "
[PATCH] char: mem: keep arch range checks overflow-safe
2026-07-18 12:20 UTC (3+ messages)
[PATCH v2] media: mtk-jpeg: drain hardware completion before freeing context
2026-07-18 11:24 UTC
[RFC PATCH 0/2] drm/meson: add HDMI support for GXLX2
2026-07-18 11:15 UTC (3+ messages)
` [RFC PATCH 1/2] dt-bindings: display: meson-dw-hdmi: add GXLX2 compatible
` [RFC PATCH 2/2] drm/meson: add GXLX2 HDMI register support
[PATCH v3] ARM: imx: Fix suspend/resume crash with Clang CFI
2026-07-18 11:13 UTC
[PATCH v3 0/4] media: synopsys: hdmirx: add HDMI audio capture support
2026-07-18 11:12 UTC (8+ messages)
` [PATCH v3 1/4] dt-bindings: media: snps,dw-hdmi-rx: add #sound-dai-cells
` [PATCH v3 2/4] media: synopsys: hdmirx: add HDMI audio capture support
` [PATCH v3 3/4] arm64: dts: rockchip: add #sound-dai-cells to the RK3588 HDMI receiver
` [PATCH v3 4/4] arm64: dts: rockchip: enable HDMI RX audio capture on Orange Pi 5 Plus
[RFC PATCH v4 0/3] make persistent huge zero folio read-only
2026-07-18 9:56 UTC (4+ messages)
` [RFC PATCH v4 1/3] mm: "
` [RFC PATCH v4 2/3] arm64/mm: add set_direct_map_ro_noflush()
` [RFC PATCH v4 3/3] x86/mm: "
[PATCH v2] ARM: imx: Fix suspend/resume crash with Clang CFI
2026-07-18 9:19 UTC
[PATCH] ARM: smp: set current pointer in assembly before jumping into C
2026-07-18 9:16 UTC
[PATCH] drm/meson: constrain the DW-HDMI regmap range
2026-07-18 9:07 UTC
[PATCH v7 00/13] ZTE zx297520v3 clock bindings and driver
2026-07-18 7:50 UTC (4+ messages)
` [PATCH v7 01/13] dt-bindings: phy: Add zx297520v3 USB phy documentation
[RFC PATCH v2 0/8] accel/rocket: RK3576 NPU (RKNN) enablement
2026-07-18 7:49 UTC (5+ messages)
` [RFC PATCH v2 1/8] dt-bindings: npu: rockchip: add rockchip,rk3576-rknn-core
` [RFC PATCH v2 7/8] arm64: dts: rockchip: rk3576: add NPU (RKNN) nodes
` [RFC PATCH v2 8/8] arm64: dts: rockchip: rk3576-rock-4d: enable NPU
[PATCH v2 0/2] Add support for Vicharak Vaaman board
2026-07-18 7:47 UTC (4+ messages)
` [PATCH v2 1/2] dt-bindings: arm: rockchip: Add "
` [PATCH v2 2/2] arm64: dts: "
[PATCH] hwrng: stm32 - Fix runtime PM cleanup on registration failure
2026-07-18 3:29 UTC
[RFC v3 0/2] rm64: kprobes: Fix single-step fault and reentry handling
2026-07-18 3:17 UTC (9+ messages)
` [RFC v3 2/2] arm64: kprobes: Allow reentering kprobes while single-stepping
page: | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox