* [PATCH v1 4/4] arm64: dts: mediatek: add mt2712 cpufreq related device nodes
From: Viresh Kumar @ 2017-12-11 7:57 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1512713278-17807-5-git-send-email-andrew-sh.cheng@mediatek.com>
On 08-12-17, 14:07, Andrew-sh Cheng wrote:
> Add opp v2 information,
> and also add clocks, regulators and opp information into cpu nodes
>
> Signed-off-by: Andrew-sh Cheng <andrew-sh.cheng@mediatek.com>
> ---
> arch/arm64/boot/dts/mediatek/mt2712-evb.dts | 27 ++++++++++++++
> arch/arm64/boot/dts/mediatek/mt2712e.dtsi | 57 +++++++++++++++++++++++++++++
> 2 files changed, 84 insertions(+)
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
--
viresh
^ permalink raw reply
* [PATCH v1 3/4] arm64: dts: mediatek: add mt8173 cpufreq related device nodes
From: Viresh Kumar @ 2017-12-11 7:56 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1512713278-17807-4-git-send-email-andrew-sh.cheng@mediatek.com>
On 08-12-17, 14:07, Andrew-sh Cheng wrote:
> Add opp v2 information,
> and also add clocks, regulators and opp information into cpu nodes
>
> Signed-off-by: Andrew-sh Cheng <andrew-sh.cheng@mediatek.com>
> ---
> arch/arm64/boot/dts/mediatek/mt8173-evb.dts | 18 ++++++
> arch/arm64/boot/dts/mediatek/mt8173.dtsi | 90 +++++++++++++++++++++++++++++
> 2 files changed, 108 insertions(+)
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
--
viresh
^ permalink raw reply
* [PATCH 02/20] dt-bindings: gpio: Add ASPEED constants
From: Arnd Bergmann @ 2017-12-11 7:56 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20171211050704.20621-3-joel@jms.id.au>
On Mon, Dec 11, 2017 at 6:06 AM, Joel Stanley <joel@jms.id.au> wrote:
> These are used to by the device tree to map pin numbers to constants
> required by the GPIO bindings.
> +
> +#define ASPEED_GPIO_PORT_A 0
> +#define ASPEED_GPIO_PORT_B 1
> +#define ASPEED_GPIO_PORT_C 2
> +#define ASPEED_GPIO_PORT_D 3
> +#define ASPEED_GPIO_PORT_E 4
> +#define ASPEED_GPIO_PORT_F 5
> +#define ASPEED_GPIO_PORT_G 6
> +#define ASPEED_GPIO_PORT_H 7
> +#define ASPEED_GPIO_PORT_I 8
> +#define ASPEED_GPIO_PORT_J 9
> +#define ASPEED_GPIO_PORT_K 10
> +#define ASPEED_GPIO_PORT_L 11
> +#define ASPEED_GPIO_PORT_M 12
> +#define ASPEED_GPIO_PORT_N 13
> +#define ASPEED_GPIO_PORT_O 14
> +#define ASPEED_GPIO_PORT_P 15
> +#define ASPEED_GPIO_PORT_Q 16
> +#define ASPEED_GPIO_PORT_R 17
> +#define ASPEED_GPIO_PORT_S 18
> +#define ASPEED_GPIO_PORT_T 19
> +#define ASPEED_GPIO_PORT_U 20
> +#define ASPEED_GPIO_PORT_V 21
> +#define ASPEED_GPIO_PORT_W 22
> +#define ASPEED_GPIO_PORT_X 23
> +#define ASPEED_GPIO_PORT_Y 24
> +#define ASPEED_GPIO_PORT_Z 25
> +#define ASPEED_GPIO_PORT_AA 26
> +#define ASPEED_GPIO_PORT_AB 27
> +#define ASPEED_GPIO_PORT_AC 28
This looks like a 1:1 mapping, wouldn't it be easier to just describe
it in the binding document?
Arnd
^ permalink raw reply
* [PATCH v1 2/4] cpufreq: mediatek: Add mediatek related projects into blacklist
From: Viresh Kumar @ 2017-12-11 7:55 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1512713278-17807-3-git-send-email-andrew-sh.cheng@mediatek.com>
On 08-12-17, 14:07, Andrew-sh Cheng wrote:
> mediatek projects will use mediate-cpufreq.c as cpufreq driver,
> instead of using cpufreq_dt.c
> Add mediatek related projects into cpufreq-dt blacklist
>
> Signed-off-by: Andrew-sh Cheng <andrew-sh.cheng@mediatek.com>
> ---
> drivers/cpufreq/cpufreq-dt-platdev.c | 8 ++++++++
> 1 file changed, 8 insertions(+)
>
> diff --git a/drivers/cpufreq/cpufreq-dt-platdev.c b/drivers/cpufreq/cpufreq-dt-platdev.c
> index ecc56e2..3b585e4 100644
> --- a/drivers/cpufreq/cpufreq-dt-platdev.c
> +++ b/drivers/cpufreq/cpufreq-dt-platdev.c
> @@ -108,6 +108,14 @@ static const struct of_device_id blacklist[] __initconst = {
>
> { .compatible = "marvell,armadaxp", },
>
> + { .compatible = "mediatek,mt2701", },
> + { .compatible = "mediatek,mt2712", },
> + { .compatible = "mediatek,mt7622", },
> + { .compatible = "mediatek,mt7623", },
> + { .compatible = "mediatek,mt817x", },
> + { .compatible = "mediatek,mt8173", },
> + { .compatible = "mediatek,mt8176", },
> +
> { .compatible = "nvidia,tegra124", },
>
> { .compatible = "st,stih407", },
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
--
viresh
^ permalink raw reply
* [PATCH v1 1/4] cpufreq: mediatek: add mt2712 into compatible list
From: Viresh Kumar @ 2017-12-11 7:54 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <1512713278-17807-2-git-send-email-andrew-sh.cheng@mediatek.com>
On 08-12-17, 14:07, Andrew-sh Cheng wrote:
> Support mt2712 in mediatek-cpufreq.c
>
> Signed-off-by: Andrew-sh Cheng <andrew-sh.cheng@mediatek.com>
> ---
> drivers/cpufreq/mediatek-cpufreq.c | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/drivers/cpufreq/mediatek-cpufreq.c b/drivers/cpufreq/mediatek-cpufreq.c
> index 18c4bd9..62aec5c 100644
> --- a/drivers/cpufreq/mediatek-cpufreq.c
> +++ b/drivers/cpufreq/mediatek-cpufreq.c
> @@ -574,6 +574,7 @@ static struct platform_driver mtk_cpufreq_platdrv = {
> /* List of machines supported by this driver */
> static const struct of_device_id mtk_cpufreq_machines[] __initconst = {
> { .compatible = "mediatek,mt2701", },
> + { .compatible = "mediatek,mt2712", },
> { .compatible = "mediatek,mt7622", },
> { .compatible = "mediatek,mt7623", },
> { .compatible = "mediatek,mt817x", },
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
--
viresh
^ permalink raw reply
* [PATCH 01/20] dt-bindings: clock: Add ASPEED constants
From: Arnd Bergmann @ 2017-12-11 7:53 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20171211050704.20621-2-joel@jms.id.au>
On Mon, Dec 11, 2017 at 6:06 AM, Joel Stanley <joel@jms.id.au> wrote:
> +#define ASPEED_NUM_CLKS 35
Why is this part of the ABI? What if they ever come out with a new
chip that needs
one more clock and you can't change it?
Arnd
^ permalink raw reply
* [PATCH 4/4] arm: dts: sun8i: a83t: Set timer node to use phy timer
From: Mylène Josserand @ 2017-12-11 7:50 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20171211075001.6100-1-mylene.josserand@free-electrons.com>
By default, virtual timers are used. These timers need an offset
that must be set by firmware, for example. In case of SMP support,
after a reset, this offset is in "unknown" state and produced
a hang of the kernel.
Use "arm,cpu-registers-not-fw-configured" property allows to use
physical timers instead of virtual ones.
Signed-off-by: Myl?ne Josserand <mylene.josserand@free-electrons.com>
---
arch/arm/boot/dts/sun8i-a83t.dtsi | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
index 3e2aad537972..0fe4b9e5dee1 100644
--- a/arch/arm/boot/dts/sun8i-a83t.dtsi
+++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
@@ -121,6 +121,7 @@
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+ arm,cpu-registers-not-fw-configured;
};
clocks {
--
2.11.0
^ permalink raw reply related
* [PATCH 3/4] arm: dts: sun8i: a83t: Add CCI-400 node
From: Mylène Josserand @ 2017-12-11 7:50 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20171211075001.6100-1-mylene.josserand@free-electrons.com>
Add CCI-400 node and control-port on CPUs needed by MCPM (ie SMP).
Signed-off-by: Myl?ne Josserand <mylene.josserand@free-electrons.com>
---
arch/arm/boot/dts/sun8i-a83t.dtsi | 41 +++++++++++++++++++++++++++++++++++++++
1 file changed, 41 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
index eeb2e7d0d6dc..3e2aad537972 100644
--- a/arch/arm/boot/dts/sun8i-a83t.dtsi
+++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
@@ -62,48 +62,56 @@
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <0>;
+ cci-control-port = <&cci_control0>;
};
cpu at 1 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <1>;
+ cci-control-port = <&cci_control0>;
};
cpu at 2 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <2>;
+ cci-control-port = <&cci_control0>;
};
cpu at 3 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <3>;
+ cci-control-port = <&cci_control0>;
};
cpu at 100 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <0x100>;
+ cci-control-port = <&cci_control1>;
};
cpu at 101 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <0x101>;
+ cci-control-port = <&cci_control1>;
};
cpu at 102 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <0x102>;
+ cci-control-port = <&cci_control1>;
};
cpu at 103 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <0x103>;
+ cci-control-port = <&cci_control1>;
};
};
@@ -314,6 +322,39 @@
status = "disabled";
};
+ cci: cci at 1790000 {
+ compatible = "arm,cci-400";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x01790000 0x1000>;
+ ranges = <0x0 0x01790000 0x10000>;
+
+ cci_control0: slave-if at 4000 {
+ compatible = "arm,cci-400-ctrl-if";
+ interface-type = "ace";
+ reg = <0x4000 0x1000>;
+ };
+
+ cci_control1: slave-if at 5000 {
+ compatible = "arm,cci-400-ctrl-if";
+ interface-type = "ace";
+ reg = <0x5000 0x1000>;
+ };
+
+ pmu at 9000 {
+ compatible = "arm,cci-400-pmu,r1";
+ reg = <0x9000 0x5000>;
+ interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
ccu: clock at 1c20000 {
compatible = "allwinner,sun8i-a83t-ccu";
reg = <0x01c20000 0x400>;
--
2.11.0
^ permalink raw reply related
* [PATCH 2/4] arm: dts: sun8i: a83t: Add registers needed for MCPM
From: Mylène Josserand @ 2017-12-11 7:49 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20171211075001.6100-1-mylene.josserand@free-electrons.com>
Add 3 registers needed for MCPM (ie SMP): prcm, cpucfg and r_cpucfg.
prcm and cpucfg are identical with sun9i-a80. The only difference
is the r_cpucfg that does not exist on sun9i.
Signed-off-by: Myl?ne Josserand <mylene.josserand@free-electrons.com>
---
arch/arm/boot/dts/sun8i-a83t.dtsi | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
index a384b766f3dc..eeb2e7d0d6dc 100644
--- a/arch/arm/boot/dts/sun8i-a83t.dtsi
+++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
@@ -323,6 +323,16 @@
#reset-cells = <1>;
};
+ cpucfg at 01700000 {
+ compatible = "allwinner,sun9i-a80-cpucfg";
+ reg = <0x01700000 0x100>;
+ };
+
+ r_cpucfg at 1f01c00 {
+ compatible = "allwinner,sun8i-a83t-r-cpucfg";
+ reg = <0x1f01c00 0x100>;
+ };
+
pio: pinctrl at 1c20800 {
compatible = "allwinner,sun8i-a83t-pinctrl";
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
@@ -493,6 +503,11 @@
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
};
+ prcm at 1f01400 {
+ compatible = "allwinner,sun9i-a80-prcm";
+ reg = <0x1f01400 0x200>;
+ };
+
r_ccu: clock at 1f01400 {
compatible = "allwinner,sun8i-a83t-r-ccu";
reg = <0x01f01400 0x400>;
--
2.11.0
^ permalink raw reply related
* [PATCH 1/4] ARM: sunxi: mcpm: Add support for A83T
From: Mylène Josserand @ 2017-12-11 7:49 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20171211075001.6100-1-mylene.josserand@free-electrons.com>
Add the support for A83T.
A83T SoC has an additional register than A80 to handle CPU configurations:
R_CPUS_CFG. Information about the register comes from Allwinner's BSP
driver.
An important difference is the Power Off Gating register for clusters
which is BIT(4) in case of SUN9I-A80 and BIT(0) in case of SUN8I-A83T.
Signed-off-by: Myl?ne Josserand <mylene.josserand@free-electrons.com>
---
arch/arm/mach-sunxi/Kconfig | 1 +
arch/arm/mach-sunxi/mcpm.c | 90 ++++++++++++++++++++++++++++++++++++++++++---
2 files changed, 86 insertions(+), 5 deletions(-)
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index 177380548d99..ae7b57fbd7ac 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -42,6 +42,7 @@ config MACH_SUN8I
default ARCH_SUNXI
select ARM_GIC
select MFD_SUN6I_PRCM
+ imply MCPM
config MACH_SUN9I
bool "Allwinner (sun9i) SoCs support"
diff --git a/arch/arm/mach-sunxi/mcpm.c b/arch/arm/mach-sunxi/mcpm.c
index 4b6e1d6ae379..fc8a28dcb576 100644
--- a/arch/arm/mach-sunxi/mcpm.c
+++ b/arch/arm/mach-sunxi/mcpm.c
@@ -43,17 +43,25 @@
#define CPUCFG_CX_RST_CTRL_L2_RST BIT(8)
#define CPUCFG_CX_RST_CTRL_CX_RST(n) BIT(4 + (n))
#define CPUCFG_CX_RST_CTRL_CORE_RST(n) BIT(n)
+#define CPUCFG_CX_RST_CTRL_CORE_RST_ALL (0xf << 0)
#define PRCM_CPU_PO_RST_CTRL(c) (0x4 + 0x4 * (c))
#define PRCM_CPU_PO_RST_CTRL_CORE(n) BIT(n)
#define PRCM_CPU_PO_RST_CTRL_CORE_ALL 0xf
#define PRCM_PWROFF_GATING_REG(c) (0x100 + 0x4 * (c))
-#define PRCM_PWROFF_GATING_REG_CLUSTER BIT(4)
+/* The power off register for clusters are different from SUN9I and SUN8I */
+#define PRCM_PWROFF_GATING_REG_CLUSTER_SUN8I BIT(0)
+#define PRCM_PWROFF_GATING_REG_CLUSTER_SUN9I BIT(4)
#define PRCM_PWROFF_GATING_REG_CORE(n) BIT(n)
#define PRCM_PWR_SWITCH_REG(c, cpu) (0x140 + 0x10 * (c) + 0x4 * (cpu))
#define PRCM_CPU_SOFT_ENTRY_REG 0x164
+#define R_CPUCFG_CLUSTER_PO_RST_CTRL(c) (0x30 + (c) * 0x4)
+#define R_CPUCFG_CLUSTER_PO_RST_CTRL_CORE(n) BIT(n)
+#define R_CPUCFG_CPU_SOFT_ENTRY_REG 0x01a4
+
static void __iomem *cpucfg_base;
+static void __iomem *r_cpucfg_base;
static void __iomem *prcm_base;
static int sunxi_cpu_power_switch_set(unsigned int cpu, unsigned int cluster,
@@ -101,6 +109,16 @@ static int sunxi_cpu_powerup(unsigned int cpu, unsigned int cluster)
reg &= ~PRCM_CPU_PO_RST_CTRL_CORE(cpu);
writel(reg, prcm_base + PRCM_CPU_PO_RST_CTRL(cluster));
+ if (r_cpucfg_base) {
+ /* assert cpu power-on reset */
+ reg = readl(r_cpucfg_base +
+ R_CPUCFG_CLUSTER_PO_RST_CTRL(cluster));
+ reg &= ~(R_CPUCFG_CLUSTER_PO_RST_CTRL_CORE(cpu));
+ writel(reg, r_cpucfg_base +
+ R_CPUCFG_CLUSTER_PO_RST_CTRL(cluster));
+ udelay(10);
+ }
+
/* Cortex-A7: hold L1 reset disable signal low */
if (!(of_machine_is_compatible("allwinner,sun9i-a80") &&
cluster == SUN9I_A80_A15_CLUSTER)) {
@@ -126,17 +144,37 @@ static int sunxi_cpu_powerup(unsigned int cpu, unsigned int cluster)
/* open power switch */
sunxi_cpu_power_switch_set(cpu, cluster, true);
+ /* Handle A83T bit swap */
+ if (of_machine_is_compatible("allwinner,sun8i-a83t")) {
+ if (cpu == 0)
+ cpu = 4;
+ }
+
/* clear processor power gate */
reg = readl(prcm_base + PRCM_PWROFF_GATING_REG(cluster));
reg &= ~PRCM_PWROFF_GATING_REG_CORE(cpu);
writel(reg, prcm_base + PRCM_PWROFF_GATING_REG(cluster));
udelay(20);
+ if (of_machine_is_compatible("allwinner,sun8i-a83t")) {
+ if (cpu == 4)
+ cpu = 0;
+ }
+
/* de-assert processor power-on reset */
reg = readl(prcm_base + PRCM_CPU_PO_RST_CTRL(cluster));
reg |= PRCM_CPU_PO_RST_CTRL_CORE(cpu);
writel(reg, prcm_base + PRCM_CPU_PO_RST_CTRL(cluster));
+ if (r_cpucfg_base) {
+ reg = readl(r_cpucfg_base +
+ R_CPUCFG_CLUSTER_PO_RST_CTRL(cluster));
+ reg |= R_CPUCFG_CLUSTER_PO_RST_CTRL_CORE(cpu);
+ writel(reg, r_cpucfg_base +
+ R_CPUCFG_CLUSTER_PO_RST_CTRL(cluster));
+ udelay(10);
+ }
+
/* de-assert all processor resets */
reg = readl(cpucfg_base + CPUCFG_CX_RST_CTRL(cluster));
reg |= CPUCFG_CX_RST_CTRL_DBG_RST(cpu);
@@ -160,6 +198,14 @@ static int sunxi_cluster_powerup(unsigned int cluster)
if (cluster >= SUNXI_NR_CLUSTERS)
return -EINVAL;
+ /* For A83T, assert cluster cores resets */
+ if (of_machine_is_compatible("allwinner,sun8i-a83t")) {
+ reg = readl(cpucfg_base + CPUCFG_CX_RST_CTRL(cluster));
+ reg &= ~CPUCFG_CX_RST_CTRL_CORE_RST_ALL; /* Core Reset */
+ writel(reg, cpucfg_base + CPUCFG_CX_RST_CTRL(cluster));
+ udelay(10);
+ }
+
/* assert ACINACTM */
reg = readl(cpucfg_base + CPUCFG_CX_CTRL_REG1(cluster));
reg |= CPUCFG_CX_CTRL_REG1_ACINACTM;
@@ -170,6 +216,16 @@ static int sunxi_cluster_powerup(unsigned int cluster)
reg &= ~PRCM_CPU_PO_RST_CTRL_CORE_ALL;
writel(reg, prcm_base + PRCM_CPU_PO_RST_CTRL(cluster));
+ /* assert cluster cores resets */
+ if (r_cpucfg_base) {
+ reg = readl(r_cpucfg_base +
+ R_CPUCFG_CLUSTER_PO_RST_CTRL(cluster));
+ reg &= ~CPUCFG_CX_RST_CTRL_CORE_RST_ALL;
+ writel(reg, r_cpucfg_base +
+ R_CPUCFG_CLUSTER_PO_RST_CTRL(cluster));
+ udelay(10);
+ }
+
/* assert cluster resets */
reg = readl(cpucfg_base + CPUCFG_CX_RST_CTRL(cluster));
reg &= ~CPUCFG_CX_RST_CTRL_DBG_SOC_RST;
@@ -202,7 +258,10 @@ static int sunxi_cluster_powerup(unsigned int cluster)
/* clear cluster power gate */
reg = readl(prcm_base + PRCM_PWROFF_GATING_REG(cluster));
- reg &= ~PRCM_PWROFF_GATING_REG_CLUSTER;
+ if (of_machine_is_compatible("allwinner,sun8i-a83t"))
+ reg &= ~PRCM_PWROFF_GATING_REG_CLUSTER_SUN8I;
+ else
+ reg &= ~PRCM_PWROFF_GATING_REG_CLUSTER_SUN9I;
writel(reg, prcm_base + PRCM_PWROFF_GATING_REG(cluster));
udelay(20);
@@ -327,8 +386,12 @@ static void __naked sunxi_power_up_setup(unsigned int affinity_level)
static void sunxi_mcpm_setup_entry_point(void)
{
- __raw_writel(virt_to_phys(mcpm_entry_point),
- prcm_base + PRCM_CPU_SOFT_ENTRY_REG);
+ if (of_machine_is_compatible("allwinner,sun9i-a80"))
+ __raw_writel(virt_to_phys(mcpm_entry_point),
+ prcm_base + PRCM_CPU_SOFT_ENTRY_REG);
+ else
+ __raw_writel(virt_to_phys(mcpm_entry_point), r_cpucfg_base +
+ R_CPUCFG_CPU_SOFT_ENTRY_REG);
}
static int __init sunxi_mcpm_init(void)
@@ -336,7 +399,8 @@ static int __init sunxi_mcpm_init(void)
struct device_node *node;
int ret;
- if (!of_machine_is_compatible("allwinner,sun9i-a80"))
+ if (!of_machine_is_compatible("allwinner,sun9i-a80") &&
+ !of_machine_is_compatible("allwinner,sun8i-a83t"))
return -ENODEV;
if (!cci_probed())
@@ -367,6 +431,22 @@ static int __init sunxi_mcpm_init(void)
return -ENOMEM;
}
+ r_cpucfg_base = NULL;
+ if (of_machine_is_compatible("allwinner,sun8i-a83t")) {
+ node = of_find_compatible_node(NULL, NULL,
+ "allwinner,sun8i-a83t-r-cpucfg");
+ if (!node)
+ return -ENODEV;
+
+ r_cpucfg_base = of_iomap(node, 0);
+ of_node_put(node);
+ if (!r_cpucfg_base) {
+ pr_err("%s: failed to map R-CPUCFG registers\n",
+ __func__);
+ return -ENOMEM;
+ }
+ }
+
ret = mcpm_platform_register(&sunxi_power_ops);
if (!ret)
ret = mcpm_sync_init(sunxi_power_up_setup);
--
2.11.0
^ permalink raw reply related
* [PATCH 0/4] Sunxi: Add SMP support on A83T
From: Mylène Josserand @ 2017-12-11 7:49 UTC (permalink / raw)
To: linux-arm-kernel
Hello everyone,
This series adds SMP support for Allwinner Sun8i-a83t
with MCPM (Multi-Cluster Power Management).
Series information:
- Based on last linux-next (next-20171211)
- Had dependencies on Chen Yu's patch that add MCPM
support:
https://patchwork.kernel.org/patch/6402801/
Patch 01: Convert the mcpm driver (initially for A80) to be able
to use it for A83T. This SoC has a bit flip that needs to be handled.
Patch 02: Add registers nodes (prcm, cpucfg and r_cpucfg) needed
for MCPM.
Patch 03: Add CCI-400 node for a83t.
Patch 04: Fix the use of virtual timers that hangs the kernel in
case of SMP support.
If you have any remarks/questions, let me know.
Thank you in advance,
Myl?ne
Myl?ne Josserand (4):
ARM: sunxi: mcpm: Add support for A83T
arm: dts: sun8i: a83t: Add registers needed for MCPM
arm: dts: sun8i: a83t: Add CCI-400 node
arm: dts: sun8i: a83t: Set timer node to use phy timer
arch/arm/boot/dts/sun8i-a83t.dtsi | 57 +++++++++++++++++++++++++
arch/arm/mach-sunxi/Kconfig | 1 +
arch/arm/mach-sunxi/mcpm.c | 90 ++++++++++++++++++++++++++++++++++++---
3 files changed, 143 insertions(+), 5 deletions(-)
--
2.11.0
^ permalink raw reply
* [PATCH v2] ARM: dts: Add ethernet PHYs to the a bunch of Geminis
From: Linus Walleij @ 2017-12-11 7:21 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20171203160658.GB7878@lunn.ch>
On Sun, Dec 3, 2017 at 5:06 PM, Andrew Lunn <andrew@lunn.ch> wrote:
> On Sun, Dec 03, 2017 at 04:04:57PM +0100, Linus Walleij wrote:
>> These Gemini boards have Ethernet PHY on GPIO bit-banged
>> MDIO, clearly defined in the corresponding OpenWRT
>> ethernet patches since ages. Add them in accordance with
>> the OpenWRT patch so we can use them when we add ethernet
>> support.
>>
>> Cc: Andrew Lunn <andrew@lunn.ch>
>> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
>
> Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Thanks man.
> This is good as is, but i just wonder if the mdio node can be moved
> into the .dtsi file. Four from six have the exact same setup. So i'm
> guessing the reference design has been copied.
Yeah they all have the GPIO lines similarly so far.
I might break out a DTSI with common stuff based on the
reference design. The main DTSI should be the chipset
but we can surely have a gemi-standard-board.dtsi as well.
Yours,
Linus Walleij
^ permalink raw reply
* [PATCH 3/5] arm: dts: sun8i: a83t: a711: Enable I2C0
From: Maxime Ripard @ 2017-12-11 7:18 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20171208215419.30396-4-mylene.josserand@free-electrons.com>
Hi,
On Fri, Dec 08, 2017 at 10:54:17PM +0100, Myl?ne Josserand wrote:
> The A711 has a touchscreen connected by I2C0.
> Enable only I2C0 node for the moment.
>
> Signed-off-by: Myl?ne Josserand <mylene.josserand@free-electrons.com>
> ---
> arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts
> index a021ee6da396..84cca1a48cea 100644
> --- a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts
> +++ b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts
> @@ -105,6 +105,13 @@
> status = "okay";
> };
>
> +&i2c0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c0_pins>;
If there's only one set of pins, maybe we should force that muxing in
the DTSI?
Thanks!
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20171211/3d651804/attachment.sig>
^ permalink raw reply
* [PATCH 5/5] arm: dts: sun8i: a83t: a711: Add touchscreen node
From: Maxime Ripard @ 2017-12-11 7:16 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20171208215419.30396-6-mylene.josserand@free-electrons.com>
Hi,
On Fri, Dec 08, 2017 at 10:54:19PM +0100, Myl?ne Josserand wrote:
> Tha A711 tablet has a FocalTech EDT-FT5x06 Polytouch touchscreen.
> It is connected via I2C0 so add his node in i2c0's node.
>
> The reset line is PD5, the interrupt line is PL7 and the power
> supply is the ldo_io0 regulator.
>
> Signed-off-by: Myl?ne Josserand <mylene.josserand@free-electrons.com>
> ---
> arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts | 11 +++++++++++
> 1 file changed, 11 insertions(+)
>
> diff --git a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts
> index 84cca1a48cea..738359917a34 100644
> --- a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts
> +++ b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts
> @@ -110,6 +110,17 @@
> pinctrl-0 = <&i2c0_pins>;
> clock-frequency = <400000>;
> status = "okay";
> +
> + polytouch: edt-ft5x06 at 38 {
You're not using that label anywhere, so you can drop it, and the node
name must be the class of the device.
Thanks!
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20171211/fc3bc50e/attachment-0001.sig>
^ permalink raw reply
* [PATCH 1/5] arm: dts: sun8i: a83t: Add I2C0 node
From: Maxime Ripard @ 2017-12-11 7:15 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20171208215419.30396-2-mylene.josserand@free-electrons.com>
Hi,
On Fri, Dec 08, 2017 at 10:54:15PM +0100, Myl?ne Josserand wrote:
> Add I2C0 node for A83T.
>
> Signed-off-by: Myl?ne Josserand <mylene.josserand@free-electrons.com>
> ---
> arch/arm/boot/dts/sun8i-a83t.dtsi | 11 +++++++++++
> 1 file changed, 11 insertions(+)
>
> diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
> index 19acae1b4089..848cf3f19962 100644
> --- a/arch/arm/boot/dts/sun8i-a83t.dtsi
> +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
> @@ -177,6 +177,17 @@
> #dma-cells = <1>;
> };
>
> + i2c0: i2c at 01c2ac00 {
Drop the leading 0, it generates a warning in dtc.
> + compatible = "allwinner,sun6i-a31-i2c";
Can you add a SoC-specific compatible there please?
> + reg = <0x01c2ac00 0x400>;
And you should order your nodes by physical address.
Thanks!
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20171211/14d2f804/attachment.sig>
^ permalink raw reply
* [PATCH v2 1/5] dt-bindings: rtc: add bindings for i.MX53 SRTC
From: Patrick Brünn @ 2017-12-11 7:08 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20171206215436.lwttn445wjilh3wo@rob-hp-laptop>
>From: Rob Herring [mailto:robh at kernel.org]
>Sent: Mittwoch, 6. Dezember 2017 22:55
>On Tue, Dec 05, 2017 at 03:06:42PM +0100, linux-kernel-dev at beckhoff.com
>wrote:
>> From: Patrick Bruenn <p.bruenn@beckhoff.com>
>>
>> +++ b/Documentation/devicetree/bindings/rtc/rtc-mxc_v2.txt
>> @@ -0,0 +1,17 @@
>> +* i.MX53 Real Time Clock controller
>> +
>> +Required properties:
>> +- compatible: should be: "fsl,imx53-rtc"
>> +- reg: physical base address of the controller and length of memory
>mapped
>> + region.
>> +- clocks: should contain the phandle for the rtc clock
>
>Shouldn't there be more than 1 here. From what I remember, the ipg clock
>and the 32k clock?
Yes, you are right. But if I am reading the original Freescale driver and the
reference manual correctly, the second clock is always active.
Section "72.3.1.1 Clocks" from the reference manual [1] reads:
"SRTC runs on two clock sources, high frequency peripherals clock and low frequency
timers clock. The high frequency peripheral IP clock is used by the SRTC peripheral bus
interface, control and status registers. The low frequency 32.768 kHz clock is the
always-active clock used by the SRTC timers..."
That's why I would only include one clock . Should I change this?
>
>> +- interrupts: rtc alarm interrupt
>> +
>> +Example:
>> +
>> +srtc at 53fa4000 {
>
>rtc at ...
>
The rtc for which this series adds support is embedded within a function block called
"Secure Real Time Clock". This driver doesn't utilize all of the hardware features by
now. But maybe someone else wants to extend the functionalities, later.
For that possibility I wanted to name the node "srtc". Should I still change this?
I believe you have a much better understanding of what should be done here. I don't
want to argue with you, just thought you might not had that information. So if I am
wrong just tell me and I will change it without further "complaining".
Thank you for taking the time,
Patrick
[1] https://cache.freescale.com/files/32bit/doc/ref_manual/iMX53RM.pdf
---
Beckhoff Automation GmbH & Co. KG | Managing Director: Dipl. Phys. Hans Beckhoff
Registered office: Verl, Germany | Register court: Guetersloh HRA 7075
^ permalink raw reply
* [PATCH 1/2] mm: make faultaround produce old ptes
From: Vinayak Menon @ 2017-12-11 7:01 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20171205121614.ek45btdgrpbmvf45@armageddon.cambridge.arm.com>
On 12/5/2017 5:46 PM, Catalin Marinas wrote:
> On Tue, Nov 28, 2017 at 11:45:27AM -0800, Linus Torvalds wrote:
>> On Mon, Nov 27, 2017 at 9:07 PM, Vinayak Menon <vinmenon@codeaurora.org> wrote:
>>> Making the faultaround ptes old results in a unixbench regression for some
>>> architectures [3][4]. But on some architectures it is not found to cause
>>> any regression. So by default produce young ptes and provide an option for
>>> architectures to make the ptes old.
>> Ugh. This hidden random behavior difference annoys me.
>>
>> It should also be better documented in the code if we end up doing it.
>>
>> The reason x86 seems to prefer young pte's is simply that a TLB lookup
>> of an old entry basically causes a micro-fault that then sets the
>> accessed bit (using a locked cycle) and then a restart.
>>
>> Those microfaults are not visible to software, but they are pretty
>> expensive in hardware, probably because they basically serialize
>> execution as if a real page fault had happened.
> In principle it's not that different for ARMv8.1+ but it highly depends
> on the microarchitecture details (and we have a lot of variation on
> ARM). From a programmer's perspective, old ptes (access flag cleared)
> are not allowed to be cached in the TLB, otherwise ptep_clear_flush()
> would break. Marking fault-around ptes as young allows the hardware to
> speculatively populate the TLB but, again, it's highly microarchitecture
> specific and I'm not sure we have a general answer covering the ARM
> architecture. Of course, faulting on old ptes is much slower without
> hardware AF.
>
>> HOWEVER - and this is the part that annoys me most about the hidden
>> behavior - I suspect it ends up being very dependent on
>> microarchitectural details in addition to the actual load. So it might
>> be more true on some cores than others, and it might be very
>> load-dependent. So hiding it as some architectural helper function
>> really feels wrong to me. It would likely be better off as a real
>> flag, and then maybe we could make the default behavior be set by
>> architecture (or even dynamically by the architecture bootup code if
>> it turns out to be enough of an issue).
> It looks to me like we are trying to work around a vmscan behaviour
> visible under memory pressure [1]. The original report doesn't state
> whether hardware AF is available (it seems to be tested on a 3.18
> Android kernel; hardware AF on arm64 went in 4.6).
Sorry for the delayed response.
The original report was based on a target without HW AF support.
The issue can be seen even on a 8GB machine with multibuild test. Yes, I agree that the problem
is triggered with reclaim, but looks like it doesn't need a very low memory condition for the issue
to be visible.
IIUC, vmscan is doing the right thing in trying to keep the hot pages. But by making the faultaround
pages young, we are saying that they are referenced which may not be true. When the speculation
that faultaround pages are hot goes wrong, vmscan ends up evicting more hot anon and file pages.
Multibuild and apps launch test on android showing a regression I think means that this speculation
is going wrong often.
Even on non-HW-AF targets, where making ptes old can result in more minor faults, performance is
better with faultaorund disabled (or making ptes old), with the above mentioned tests.
I think making faultaround pages young was not intentionally done by the original faultaround code [1],
and the original idea was to gain benefit of reduced minor faults.
> In this case there is a trade-off between swapping out potentially hot
> pages vs page table walk (either in hardware or via software fault) for
> fault-around ptes. This trade-off further depends on whether the
> architecture can do hardware access flag or not.
>
> I would be more in favour of some heuristics to dynamically reduce the
> fault-around bytes based on the memory pressure rather than choosing
> between young or old ptes.
Even with minimal or moderate? memory pressure, if the speculation that faultaround pages are hot is
wrong, it can result in wrong evictions. I am not sure, but it could be similar reason why we skip VM_SEQ_READ
pages in page_referenced_one.
Since the arm64 tests doesn't show any visible impact of page table walk, there doesn't seem to be a case of
trade-off. I agree that this may not be a case for all arm64 cores, but it would be advantageous to make
faultaround ptes old on targets which doesn't show page table access issues. And shouldn't faultaround ptes
logically be old until they are really accessed ?
Also, even during memory pressure, it can be beneficial to have faultaround pages which reduces the page
faults (even if a quarter of the pages are actually accessed), but the issue is only that they are made young
which confuses vmscan. So I think faultaround bytes may not be related to memory pressure.
> Or, if we are to go with old vs young ptes,
> make this choice dependent on the memory pressure regardless of whether
> the CPU supports hardware accessed bit.
Will it be okay then to make this flag part of /proc/sys/vm and let the vmpressure clients take care of
setting it based on the vmpressure values ? Those who always want faultaround ptes to be old can do
that too with this interface.
[1] https://lkml.org/lkml/2016/4/22/568
Thanks,
Vinayak
^ permalink raw reply
* [PATCH v6 6/6] arm64: dts: meson-axg: switch uart_ao clock to CLK81
From: Yixun Lan @ 2017-12-11 6:48 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20171211064853.32111-1-yixun.lan@amlogic.com>
Switch the uart_ao pclk to CLK81 since the clock driver is ready.
Also move the clock info to the board.dts instead in the soc.dtsi.
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
---
arch/arm64/boot/dts/amlogic/meson-axg-s400.dts | 2 ++
arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 5 +----
2 files changed, 3 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
index 70eca1f8736a..718bbebff107 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
@@ -19,4 +19,6 @@
&uart_AO {
status = "okay";
+ clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>;
+ clock-names = "xtal", "pclk", "baud";
};
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index 6fe5ee0c144e..f5b496bfd4de 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -7,6 +7,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/axg-clkc.h>
/ {
compatible = "amlogic,meson-axg";
@@ -200,8 +201,6 @@
compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart";
reg = <0x0 0x3000 0x0 0x18>;
interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
- clocks = <&xtal>, <&xtal>, <&xtal>;
- clock-names = "xtal", "pclk", "baud";
status = "disabled";
};
@@ -209,8 +208,6 @@
compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart";
reg = <0x0 0x4000 0x0 0x18>;
interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
- clocks = <&xtal>, <&xtal>, <&xtal>;
- clock-names = "xtal", "pclk", "baud";
status = "disabled";
};
};
--
2.15.1
^ permalink raw reply related
* [PATCH v6 5/6] arm64: dts: meson-axg: add clock DT info for Meson AXG SoC
From: Yixun Lan @ 2017-12-11 6:48 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20171211064853.32111-1-yixun.lan@amlogic.com>
From: Qiufang Dai <qiufang.dai@amlogic.com>
Try to add Hiubus DT info, and also enable clock DT info
for the Amlogic's Meson-AXG SoC.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
---
arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index b932a784b02a..6fe5ee0c144e 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -148,6 +148,20 @@
#address-cells = <0>;
};
+ hiubus: bus at ff63c000 {
+ compatible = "simple-bus";
+ reg = <0x0 0xff63c000 0x0 0x1c00>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0xff63c000 0x0 0x1c00>;
+
+ clkc: clock-controller at 0 {
+ compatible = "amlogic,axg-clkc";
+ #clock-cells = <1>;
+ reg = <0x0 0x0 0x0 0x320>;
+ };
+ };
+
mailbox: mailbox at ff63dc00 {
compatible = "amlogic,meson-gx-mhu", "amlogic,meson-gxbb-mhu";
reg = <0 0xff63dc00 0 0x400>;
--
2.15.1
^ permalink raw reply related
* [PATCH v6 4/6] clk: meson: make the spinlock naming more specific
From: Yixun Lan @ 2017-12-11 6:48 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20171211064853.32111-1-yixun.lan@amlogic.com>
Make the spinlock more specific, so better for lockdep
debugging and ctags/grep.
Suggested-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
---
this patch try to address the issue which bring up by Stephen at [1]
[1] http://lists.infradead.org/pipermail/linux-amlogic/2017-December/005534.html
---
drivers/clk/meson/axg.c | 34 +++++++-------
drivers/clk/meson/clkc.h | 2 +-
drivers/clk/meson/gxbb.c | 112 ++++++++++++++++++++++----------------------
drivers/clk/meson/meson8b.c | 24 +++++-----
4 files changed, 86 insertions(+), 86 deletions(-)
diff --git a/drivers/clk/meson/axg.c b/drivers/clk/meson/axg.c
index cba75409f929..8d8758089472 100644
--- a/drivers/clk/meson/axg.c
+++ b/drivers/clk/meson/axg.c
@@ -19,7 +19,7 @@
#include "clkc.h"
#include "axg.h"
-static DEFINE_SPINLOCK(clk_lock);
+static DEFINE_SPINLOCK(meson_clk_lock);
static const struct pll_rate_table sys_pll_rate_table[] = {
PLL_RATE(24000000, 56, 1, 2),
@@ -129,7 +129,7 @@ static struct meson_clk_pll axg_fixed_pll = {
.shift = 16,
.width = 2,
},
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "fixed_pll",
.ops = &meson_clk_pll_ro_ops,
@@ -157,7 +157,7 @@ static struct meson_clk_pll axg_sys_pll = {
},
.rate_table = sys_pll_rate_table,
.rate_count = ARRAY_SIZE(sys_pll_rate_table),
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "sys_pll",
.ops = &meson_clk_pll_ro_ops,
@@ -291,7 +291,7 @@ static struct meson_clk_pll axg_gp0_pll = {
},
.rate_table = axg_gp0_pll_rate_table,
.rate_count = ARRAY_SIZE(axg_gp0_pll_rate_table),
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "gp0_pll",
.ops = &meson_clk_pll_ops,
@@ -383,7 +383,7 @@ static struct meson_clk_mpll axg_mpll0 = {
.shift = 25,
.width = 1,
},
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "mpll0",
.ops = &meson_clk_mpll_ops,
@@ -413,7 +413,7 @@ static struct meson_clk_mpll axg_mpll1 = {
.shift = 14,
.width = 1,
},
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "mpll1",
.ops = &meson_clk_mpll_ops,
@@ -443,7 +443,7 @@ static struct meson_clk_mpll axg_mpll2 = {
.shift = 14,
.width = 1,
},
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "mpll2",
.ops = &meson_clk_mpll_ops,
@@ -473,7 +473,7 @@ static struct meson_clk_mpll axg_mpll3 = {
.shift = 0,
.width = 1,
},
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "mpll3",
.ops = &meson_clk_mpll_ops,
@@ -499,7 +499,7 @@ static struct clk_mux axg_mpeg_clk_sel = {
.shift = 12,
.flags = CLK_MUX_READ_ONLY,
.table = mux_table_clk81,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "mpeg_clk_sel",
.ops = &clk_mux_ro_ops,
@@ -518,7 +518,7 @@ static struct clk_divider axg_mpeg_clk_div = {
.reg = (void *)HHI_MPEG_CLK_CNTL,
.shift = 0,
.width = 7,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "mpeg_clk_div",
.ops = &clk_divider_ops,
@@ -531,7 +531,7 @@ static struct clk_divider axg_mpeg_clk_div = {
static struct clk_gate axg_clk81 = {
.reg = (void *)HHI_MPEG_CLK_CNTL,
.bit_idx = 7,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "clk81",
.ops = &clk_gate_ops,
@@ -557,7 +557,7 @@ static struct clk_mux axg_sd_emmc_b_clk0_sel = {
.reg = (void *)HHI_SD_EMMC_CLK_CNTL,
.mask = 0x7,
.shift = 25,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data) {
.name = "sd_emmc_b_clk0_sel",
.ops = &clk_mux_ops,
@@ -571,7 +571,7 @@ static struct clk_divider axg_sd_emmc_b_clk0_div = {
.reg = (void *)HHI_SD_EMMC_CLK_CNTL,
.shift = 16,
.width = 7,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.flags = CLK_DIVIDER_ROUND_CLOSEST,
.hw.init = &(struct clk_init_data) {
.name = "sd_emmc_b_clk0_div",
@@ -585,7 +585,7 @@ static struct clk_divider axg_sd_emmc_b_clk0_div = {
static struct clk_gate axg_sd_emmc_b_clk0 = {
.reg = (void *)HHI_SD_EMMC_CLK_CNTL,
.bit_idx = 23,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "sd_emmc_b_clk0",
.ops = &clk_gate_ops,
@@ -600,7 +600,7 @@ static struct clk_mux axg_sd_emmc_c_clk0_sel = {
.reg = (void *)HHI_NAND_CLK_CNTL,
.mask = 0x7,
.shift = 9,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data) {
.name = "sd_emmc_c_clk0_sel",
.ops = &clk_mux_ops,
@@ -614,7 +614,7 @@ static struct clk_divider axg_sd_emmc_c_clk0_div = {
.reg = (void *)HHI_NAND_CLK_CNTL,
.shift = 0,
.width = 7,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.flags = CLK_DIVIDER_ROUND_CLOSEST,
.hw.init = &(struct clk_init_data) {
.name = "sd_emmc_c_clk0_div",
@@ -628,7 +628,7 @@ static struct clk_divider axg_sd_emmc_c_clk0_div = {
static struct clk_gate axg_sd_emmc_c_clk0 = {
.reg = (void *)HHI_NAND_CLK_CNTL,
.bit_idx = 7,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "sd_emmc_c_clk0",
.ops = &clk_gate_ops,
diff --git a/drivers/clk/meson/clkc.h b/drivers/clk/meson/clkc.h
index 1629da9b4141..87f06a801a4d 100644
--- a/drivers/clk/meson/clkc.h
+++ b/drivers/clk/meson/clkc.h
@@ -134,7 +134,7 @@ struct meson_clk_audio_divider {
struct clk_gate _name = { \
.reg = (void __iomem *) _reg, \
.bit_idx = (_bit), \
- .lock = &clk_lock, \
+ .lock = &meson_clk_lock, \
.hw.init = &(struct clk_init_data) { \
.name = #_name, \
.ops = &clk_gate_ops, \
diff --git a/drivers/clk/meson/gxbb.c b/drivers/clk/meson/gxbb.c
index ae385310e980..48936fbe7fd0 100644
--- a/drivers/clk/meson/gxbb.c
+++ b/drivers/clk/meson/gxbb.c
@@ -27,7 +27,7 @@
#include "clkc.h"
#include "gxbb.h"
-static DEFINE_SPINLOCK(clk_lock);
+static DEFINE_SPINLOCK(meson_clk_lock);
static const struct pll_rate_table sys_pll_rate_table[] = {
PLL_RATE(24000000, 56, 1, 2),
@@ -294,7 +294,7 @@ static struct meson_clk_pll gxbb_fixed_pll = {
.shift = 16,
.width = 2,
},
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "fixed_pll",
.ops = &meson_clk_pll_ro_ops,
@@ -330,7 +330,7 @@ static struct meson_clk_pll gxbb_hdmi_pll = {
.shift = 22,
.width = 2,
},
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "hdmi_pll",
.ops = &meson_clk_pll_ro_ops,
@@ -358,7 +358,7 @@ static struct meson_clk_pll gxbb_sys_pll = {
},
.rate_table = sys_pll_rate_table,
.rate_count = ARRAY_SIZE(sys_pll_rate_table),
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "sys_pll",
.ops = &meson_clk_pll_ro_ops,
@@ -399,7 +399,7 @@ static struct meson_clk_pll gxbb_gp0_pll = {
},
.rate_table = gxbb_gp0_pll_rate_table,
.rate_count = ARRAY_SIZE(gxbb_gp0_pll_rate_table),
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "gp0_pll",
.ops = &meson_clk_pll_ops,
@@ -442,7 +442,7 @@ static struct meson_clk_pll gxl_gp0_pll = {
},
.rate_table = gxl_gp0_pll_rate_table,
.rate_count = ARRAY_SIZE(gxl_gp0_pll_rate_table),
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "gp0_pll",
.ops = &meson_clk_pll_ops,
@@ -533,7 +533,7 @@ static struct meson_clk_mpll gxbb_mpll0 = {
.shift = 25,
.width = 1,
},
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "mpll0",
.ops = &meson_clk_mpll_ops,
@@ -563,7 +563,7 @@ static struct meson_clk_mpll gxbb_mpll1 = {
.shift = 14,
.width = 1,
},
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "mpll1",
.ops = &meson_clk_mpll_ops,
@@ -593,7 +593,7 @@ static struct meson_clk_mpll gxbb_mpll2 = {
.shift = 14,
.width = 1,
},
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "mpll2",
.ops = &meson_clk_mpll_ops,
@@ -620,7 +620,7 @@ static struct clk_mux gxbb_mpeg_clk_sel = {
.shift = 12,
.flags = CLK_MUX_READ_ONLY,
.table = mux_table_clk81,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "mpeg_clk_sel",
.ops = &clk_mux_ro_ops,
@@ -639,7 +639,7 @@ static struct clk_divider gxbb_mpeg_clk_div = {
.reg = (void *)HHI_MPEG_CLK_CNTL,
.shift = 0,
.width = 7,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "mpeg_clk_div",
.ops = &clk_divider_ops,
@@ -653,7 +653,7 @@ static struct clk_divider gxbb_mpeg_clk_div = {
static struct clk_gate gxbb_clk81 = {
.reg = (void *)HHI_MPEG_CLK_CNTL,
.bit_idx = 7,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "clk81",
.ops = &clk_gate_ops,
@@ -667,7 +667,7 @@ static struct clk_mux gxbb_sar_adc_clk_sel = {
.reg = (void *)HHI_SAR_CLK_CNTL,
.mask = 0x3,
.shift = 9,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "sar_adc_clk_sel",
.ops = &clk_mux_ops,
@@ -681,7 +681,7 @@ static struct clk_divider gxbb_sar_adc_clk_div = {
.reg = (void *)HHI_SAR_CLK_CNTL,
.shift = 0,
.width = 8,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "sar_adc_clk_div",
.ops = &clk_divider_ops,
@@ -693,7 +693,7 @@ static struct clk_divider gxbb_sar_adc_clk_div = {
static struct clk_gate gxbb_sar_adc_clk = {
.reg = (void *)HHI_SAR_CLK_CNTL,
.bit_idx = 8,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "sar_adc_clk",
.ops = &clk_gate_ops,
@@ -719,7 +719,7 @@ static struct clk_mux gxbb_mali_0_sel = {
.mask = 0x7,
.shift = 9,
.table = mux_table_mali_0_1,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "mali_0_sel",
.ops = &clk_mux_ops,
@@ -738,7 +738,7 @@ static struct clk_divider gxbb_mali_0_div = {
.reg = (void *)HHI_MALI_CLK_CNTL,
.shift = 0,
.width = 7,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "mali_0_div",
.ops = &clk_divider_ops,
@@ -751,7 +751,7 @@ static struct clk_divider gxbb_mali_0_div = {
static struct clk_gate gxbb_mali_0 = {
.reg = (void *)HHI_MALI_CLK_CNTL,
.bit_idx = 8,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "mali_0",
.ops = &clk_gate_ops,
@@ -766,7 +766,7 @@ static struct clk_mux gxbb_mali_1_sel = {
.mask = 0x7,
.shift = 25,
.table = mux_table_mali_0_1,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "mali_1_sel",
.ops = &clk_mux_ops,
@@ -785,7 +785,7 @@ static struct clk_divider gxbb_mali_1_div = {
.reg = (void *)HHI_MALI_CLK_CNTL,
.shift = 16,
.width = 7,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "mali_1_div",
.ops = &clk_divider_ops,
@@ -798,7 +798,7 @@ static struct clk_divider gxbb_mali_1_div = {
static struct clk_gate gxbb_mali_1 = {
.reg = (void *)HHI_MALI_CLK_CNTL,
.bit_idx = 24,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "mali_1",
.ops = &clk_gate_ops,
@@ -818,7 +818,7 @@ static struct clk_mux gxbb_mali = {
.mask = 1,
.shift = 31,
.table = mux_table_mali,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "mali",
.ops = &clk_mux_ops,
@@ -834,7 +834,7 @@ static struct clk_mux gxbb_cts_amclk_sel = {
.shift = 9,
/* Default parent unknown (register reset value: 0) */
.table = (u32[]){ 1, 2, 3 },
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "cts_amclk_sel",
.ops = &clk_mux_ops,
@@ -851,7 +851,7 @@ static struct meson_clk_audio_divider gxbb_cts_amclk_div = {
.width = 8,
},
.flags = CLK_DIVIDER_ROUND_CLOSEST,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "cts_amclk_div",
.ops = &meson_clk_audio_divider_ops,
@@ -864,7 +864,7 @@ static struct meson_clk_audio_divider gxbb_cts_amclk_div = {
static struct clk_gate gxbb_cts_amclk = {
.reg = (void *) HHI_AUD_CLK_CNTL,
.bit_idx = 8,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "cts_amclk",
.ops = &clk_gate_ops,
@@ -880,7 +880,7 @@ static struct clk_mux gxbb_cts_mclk_i958_sel = {
.shift = 25,
/* Default parent unknown (register reset value: 0) */
.table = (u32[]){ 1, 2, 3 },
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data) {
.name = "cts_mclk_i958_sel",
.ops = &clk_mux_ops,
@@ -894,7 +894,7 @@ static struct clk_divider gxbb_cts_mclk_i958_div = {
.reg = (void *)HHI_AUD_CLK_CNTL2,
.shift = 16,
.width = 8,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.flags = CLK_DIVIDER_ROUND_CLOSEST,
.hw.init = &(struct clk_init_data) {
.name = "cts_mclk_i958_div",
@@ -908,7 +908,7 @@ static struct clk_divider gxbb_cts_mclk_i958_div = {
static struct clk_gate gxbb_cts_mclk_i958 = {
.reg = (void *)HHI_AUD_CLK_CNTL2,
.bit_idx = 24,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "cts_mclk_i958",
.ops = &clk_gate_ops,
@@ -922,7 +922,7 @@ static struct clk_mux gxbb_cts_i958 = {
.reg = (void *)HHI_AUD_CLK_CNTL2,
.mask = 0x1,
.shift = 27,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "cts_i958",
.ops = &clk_mux_ops,
@@ -940,7 +940,7 @@ static struct clk_divider gxbb_32k_clk_div = {
.reg = (void *)HHI_32K_CLK_CNTL,
.shift = 0,
.width = 14,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "32k_clk_div",
.ops = &clk_divider_ops,
@@ -953,7 +953,7 @@ static struct clk_divider gxbb_32k_clk_div = {
static struct clk_gate gxbb_32k_clk = {
.reg = (void *)HHI_32K_CLK_CNTL,
.bit_idx = 15,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "32k_clk",
.ops = &clk_gate_ops,
@@ -971,7 +971,7 @@ static struct clk_mux gxbb_32k_clk_sel = {
.reg = (void *)HHI_32K_CLK_CNTL,
.mask = 0x3,
.shift = 16,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "32k_clk_sel",
.ops = &clk_mux_ops,
@@ -997,7 +997,7 @@ static struct clk_mux gxbb_sd_emmc_a_clk0_sel = {
.reg = (void *)HHI_SD_EMMC_CLK_CNTL,
.mask = 0x7,
.shift = 9,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data) {
.name = "sd_emmc_a_clk0_sel",
.ops = &clk_mux_ops,
@@ -1011,7 +1011,7 @@ static struct clk_divider gxbb_sd_emmc_a_clk0_div = {
.reg = (void *)HHI_SD_EMMC_CLK_CNTL,
.shift = 0,
.width = 7,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.flags = CLK_DIVIDER_ROUND_CLOSEST,
.hw.init = &(struct clk_init_data) {
.name = "sd_emmc_a_clk0_div",
@@ -1025,7 +1025,7 @@ static struct clk_divider gxbb_sd_emmc_a_clk0_div = {
static struct clk_gate gxbb_sd_emmc_a_clk0 = {
.reg = (void *)HHI_SD_EMMC_CLK_CNTL,
.bit_idx = 7,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "sd_emmc_a_clk0",
.ops = &clk_gate_ops,
@@ -1050,7 +1050,7 @@ static struct clk_mux gxbb_sd_emmc_b_clk0_sel = {
.reg = (void *)HHI_SD_EMMC_CLK_CNTL,
.mask = 0x7,
.shift = 25,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data) {
.name = "sd_emmc_b_clk0_sel",
.ops = &clk_mux_ops,
@@ -1064,7 +1064,7 @@ static struct clk_divider gxbb_sd_emmc_b_clk0_div = {
.reg = (void *)HHI_SD_EMMC_CLK_CNTL,
.shift = 16,
.width = 7,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.flags = CLK_DIVIDER_ROUND_CLOSEST,
.hw.init = &(struct clk_init_data) {
.name = "sd_emmc_b_clk0_div",
@@ -1078,7 +1078,7 @@ static struct clk_divider gxbb_sd_emmc_b_clk0_div = {
static struct clk_gate gxbb_sd_emmc_b_clk0 = {
.reg = (void *)HHI_SD_EMMC_CLK_CNTL,
.bit_idx = 23,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "sd_emmc_b_clk0",
.ops = &clk_gate_ops,
@@ -1093,7 +1093,7 @@ static struct clk_mux gxbb_sd_emmc_c_clk0_sel = {
.reg = (void *)HHI_NAND_CLK_CNTL,
.mask = 0x7,
.shift = 9,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data) {
.name = "sd_emmc_c_clk0_sel",
.ops = &clk_mux_ops,
@@ -1107,7 +1107,7 @@ static struct clk_divider gxbb_sd_emmc_c_clk0_div = {
.reg = (void *)HHI_NAND_CLK_CNTL,
.shift = 0,
.width = 7,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.flags = CLK_DIVIDER_ROUND_CLOSEST,
.hw.init = &(struct clk_init_data) {
.name = "sd_emmc_c_clk0_div",
@@ -1121,7 +1121,7 @@ static struct clk_divider gxbb_sd_emmc_c_clk0_div = {
static struct clk_gate gxbb_sd_emmc_c_clk0 = {
.reg = (void *)HHI_NAND_CLK_CNTL,
.bit_idx = 7,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "sd_emmc_c_clk0",
.ops = &clk_gate_ops,
@@ -1142,7 +1142,7 @@ static struct clk_mux gxbb_vpu_0_sel = {
.reg = (void *)HHI_VPU_CLK_CNTL,
.mask = 0x3,
.shift = 9,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.table = mux_table_vpu,
.hw.init = &(struct clk_init_data){
.name = "vpu_0_sel",
@@ -1161,7 +1161,7 @@ static struct clk_divider gxbb_vpu_0_div = {
.reg = (void *)HHI_VPU_CLK_CNTL,
.shift = 0,
.width = 7,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "vpu_0_div",
.ops = &clk_divider_ops,
@@ -1174,7 +1174,7 @@ static struct clk_divider gxbb_vpu_0_div = {
static struct clk_gate gxbb_vpu_0 = {
.reg = (void *)HHI_VPU_CLK_CNTL,
.bit_idx = 8,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data) {
.name = "vpu_0",
.ops = &clk_gate_ops,
@@ -1188,7 +1188,7 @@ static struct clk_mux gxbb_vpu_1_sel = {
.reg = (void *)HHI_VPU_CLK_CNTL,
.mask = 0x3,
.shift = 25,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.table = mux_table_vpu,
.hw.init = &(struct clk_init_data){
.name = "vpu_1_sel",
@@ -1207,7 +1207,7 @@ static struct clk_divider gxbb_vpu_1_div = {
.reg = (void *)HHI_VPU_CLK_CNTL,
.shift = 16,
.width = 7,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "vpu_1_div",
.ops = &clk_divider_ops,
@@ -1220,7 +1220,7 @@ static struct clk_divider gxbb_vpu_1_div = {
static struct clk_gate gxbb_vpu_1 = {
.reg = (void *)HHI_VPU_CLK_CNTL,
.bit_idx = 24,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data) {
.name = "vpu_1",
.ops = &clk_gate_ops,
@@ -1234,7 +1234,7 @@ static struct clk_mux gxbb_vpu = {
.reg = (void *)HHI_VPU_CLK_CNTL,
.mask = 1,
.shift = 31,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "vpu",
.ops = &clk_mux_ops,
@@ -1259,7 +1259,7 @@ static struct clk_mux gxbb_vapb_0_sel = {
.reg = (void *)HHI_VAPBCLK_CNTL,
.mask = 0x3,
.shift = 9,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.table = mux_table_vapb,
.hw.init = &(struct clk_init_data){
.name = "vapb_0_sel",
@@ -1278,7 +1278,7 @@ static struct clk_divider gxbb_vapb_0_div = {
.reg = (void *)HHI_VAPBCLK_CNTL,
.shift = 0,
.width = 7,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "vapb_0_div",
.ops = &clk_divider_ops,
@@ -1291,7 +1291,7 @@ static struct clk_divider gxbb_vapb_0_div = {
static struct clk_gate gxbb_vapb_0 = {
.reg = (void *)HHI_VAPBCLK_CNTL,
.bit_idx = 8,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data) {
.name = "vapb_0",
.ops = &clk_gate_ops,
@@ -1305,7 +1305,7 @@ static struct clk_mux gxbb_vapb_1_sel = {
.reg = (void *)HHI_VAPBCLK_CNTL,
.mask = 0x3,
.shift = 25,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.table = mux_table_vapb,
.hw.init = &(struct clk_init_data){
.name = "vapb_1_sel",
@@ -1324,7 +1324,7 @@ static struct clk_divider gxbb_vapb_1_div = {
.reg = (void *)HHI_VAPBCLK_CNTL,
.shift = 16,
.width = 7,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "vapb_1_div",
.ops = &clk_divider_ops,
@@ -1337,7 +1337,7 @@ static struct clk_divider gxbb_vapb_1_div = {
static struct clk_gate gxbb_vapb_1 = {
.reg = (void *)HHI_VAPBCLK_CNTL,
.bit_idx = 24,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data) {
.name = "vapb_1",
.ops = &clk_gate_ops,
@@ -1351,7 +1351,7 @@ static struct clk_mux gxbb_vapb_sel = {
.reg = (void *)HHI_VAPBCLK_CNTL,
.mask = 1,
.shift = 31,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "vapb_sel",
.ops = &clk_mux_ops,
@@ -1368,7 +1368,7 @@ static struct clk_mux gxbb_vapb_sel = {
static struct clk_gate gxbb_vapb = {
.reg = (void *)HHI_VAPBCLK_CNTL,
.bit_idx = 30,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data) {
.name = "vapb",
.ops = &clk_gate_ops,
diff --git a/drivers/clk/meson/meson8b.c b/drivers/clk/meson/meson8b.c
index 20ab7190d328..3ffea80c1308 100644
--- a/drivers/clk/meson/meson8b.c
+++ b/drivers/clk/meson/meson8b.c
@@ -32,7 +32,7 @@
#include "clkc.h"
#include "meson8b.h"
-static DEFINE_SPINLOCK(clk_lock);
+static DEFINE_SPINLOCK(meson_clk_lock);
static void __iomem *clk_base;
@@ -136,7 +136,7 @@ static struct meson_clk_pll meson8b_fixed_pll = {
.shift = 16,
.width = 2,
},
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "fixed_pll",
.ops = &meson_clk_pll_ro_ops,
@@ -162,7 +162,7 @@ static struct meson_clk_pll meson8b_vid_pll = {
.shift = 16,
.width = 2,
},
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "vid_pll",
.ops = &meson_clk_pll_ro_ops,
@@ -190,7 +190,7 @@ static struct meson_clk_pll meson8b_sys_pll = {
},
.rate_table = sys_pll_rate_table,
.rate_count = ARRAY_SIZE(sys_pll_rate_table),
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "sys_pll",
.ops = &meson_clk_pll_ops,
@@ -281,7 +281,7 @@ static struct meson_clk_mpll meson8b_mpll0 = {
.shift = 25,
.width = 1,
},
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "mpll0",
.ops = &meson_clk_mpll_ops,
@@ -311,7 +311,7 @@ static struct meson_clk_mpll meson8b_mpll1 = {
.shift = 14,
.width = 1,
},
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "mpll1",
.ops = &meson_clk_mpll_ops,
@@ -341,7 +341,7 @@ static struct meson_clk_mpll meson8b_mpll2 = {
.shift = 14,
.width = 1,
},
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "mpll2",
.ops = &meson_clk_mpll_ops,
@@ -375,7 +375,7 @@ struct clk_mux meson8b_mpeg_clk_sel = {
.shift = 12,
.flags = CLK_MUX_READ_ONLY,
.table = mux_table_clk81,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "mpeg_clk_sel",
.ops = &clk_mux_ro_ops,
@@ -395,7 +395,7 @@ struct clk_divider meson8b_mpeg_clk_div = {
.reg = (void *)HHI_MPEG_CLK_CNTL,
.shift = 0,
.width = 7,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "mpeg_clk_div",
.ops = &clk_divider_ops,
@@ -408,7 +408,7 @@ struct clk_divider meson8b_mpeg_clk_div = {
struct clk_gate meson8b_clk81 = {
.reg = (void *)HHI_MPEG_CLK_CNTL,
.bit_idx = 7,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "clk81",
.ops = &clk_gate_ops,
@@ -773,7 +773,7 @@ static int meson8b_clk_reset_update(struct reset_controller_dev *rcdev,
reset = &meson8b_clk_reset_bits[id];
- spin_lock_irqsave(&clk_lock, flags);
+ spin_lock_irqsave(&meson_clk_lock, flags);
val = readl(meson8b_clk_reset->base + reset->reg);
if (assert)
@@ -782,7 +782,7 @@ static int meson8b_clk_reset_update(struct reset_controller_dev *rcdev,
val &= ~BIT(reset->bit_idx);
writel(val, meson8b_clk_reset->base + reset->reg);
- spin_unlock_irqrestore(&clk_lock, flags);
+ spin_unlock_irqrestore(&meson_clk_lock, flags);
return 0;
}
--
2.15.1
^ permalink raw reply related
* [PATCH v6 3/6] clk: meson-axg: add clock controller drivers
From: Yixun Lan @ 2017-12-11 6:48 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20171211064853.32111-1-yixun.lan@amlogic.com>
From: Qiufang Dai <qiufang.dai@amlogic.com>
Add clock controller drivers for Amlogic Meson-AXG SoC.
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
---
arch/arm64/Kconfig.platforms | 1 +
drivers/clk/meson/Kconfig | 8 +
drivers/clk/meson/Makefile | 1 +
drivers/clk/meson/axg.c | 944 +++++++++++++++++++++++++++++++++++++++++++
drivers/clk/meson/axg.h | 126 ++++++
5 files changed, 1080 insertions(+)
create mode 100644 drivers/clk/meson/axg.c
create mode 100644 drivers/clk/meson/axg.h
diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index 2401373565ff..fbedbd8f619a 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -105,6 +105,7 @@ config ARCH_MESON
select PINCTRL_MESON
select COMMON_CLK_AMLOGIC
select COMMON_CLK_GXBB
+ select COMMON_CLK_AXG
select MESON_IRQ_GPIO
help
This enables support for the Amlogic S905 SoCs.
diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig
index d2d0174a6eca..7694302c70a4 100644
--- a/drivers/clk/meson/Kconfig
+++ b/drivers/clk/meson/Kconfig
@@ -19,3 +19,11 @@ config COMMON_CLK_GXBB
help
Support for the clock controller on AmLogic S905 devices, aka gxbb.
Say Y if you want peripherals and CPU frequency scaling to work.
+
+config COMMON_CLK_AXG
+ bool
+ depends on COMMON_CLK_AMLOGIC
+ select RESET_CONTROLLER
+ help
+ Support for the clock controller on AmLogic A113D devices, aka axg.
+ Say Y if you want peripherals and CPU frequency scaling to work.
diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
index b139d41b25da..3c03ce583798 100644
--- a/drivers/clk/meson/Makefile
+++ b/drivers/clk/meson/Makefile
@@ -5,3 +5,4 @@
obj-$(CONFIG_COMMON_CLK_AMLOGIC) += clk-pll.o clk-cpu.o clk-mpll.o clk-audio-divider.o
obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o
obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o gxbb-aoclk-regmap.o gxbb-aoclk-32k.o
+obj-$(CONFIG_COMMON_CLK_AXG) += axg.o
diff --git a/drivers/clk/meson/axg.c b/drivers/clk/meson/axg.c
new file mode 100644
index 000000000000..cba75409f929
--- /dev/null
+++ b/drivers/clk/meson/axg.c
@@ -0,0 +1,944 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * AmLogic Meson-AXG Clock Controller Driver
+ *
+ * Copyright (c) 2016 Baylibre SAS.
+ * Author: Michael Turquette <mturquette@baylibre.com>
+ *
+ * Copyright (c) 2017 Amlogic, inc.
+ * Author: Qiufang Dai <qiufang.dai@amlogic.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/init.h>
+
+#include "clkc.h"
+#include "axg.h"
+
+static DEFINE_SPINLOCK(clk_lock);
+
+static const struct pll_rate_table sys_pll_rate_table[] = {
+ PLL_RATE(24000000, 56, 1, 2),
+ PLL_RATE(48000000, 64, 1, 2),
+ PLL_RATE(72000000, 72, 1, 2),
+ PLL_RATE(96000000, 64, 1, 2),
+ PLL_RATE(120000000, 80, 1, 2),
+ PLL_RATE(144000000, 96, 1, 2),
+ PLL_RATE(168000000, 56, 1, 1),
+ PLL_RATE(192000000, 64, 1, 1),
+ PLL_RATE(216000000, 72, 1, 1),
+ PLL_RATE(240000000, 80, 1, 1),
+ PLL_RATE(264000000, 88, 1, 1),
+ PLL_RATE(288000000, 96, 1, 1),
+ PLL_RATE(312000000, 52, 1, 2),
+ PLL_RATE(336000000, 56, 1, 2),
+ PLL_RATE(360000000, 60, 1, 2),
+ PLL_RATE(384000000, 64, 1, 2),
+ PLL_RATE(408000000, 68, 1, 2),
+ PLL_RATE(432000000, 72, 1, 2),
+ PLL_RATE(456000000, 76, 1, 2),
+ PLL_RATE(480000000, 80, 1, 2),
+ PLL_RATE(504000000, 84, 1, 2),
+ PLL_RATE(528000000, 88, 1, 2),
+ PLL_RATE(552000000, 92, 1, 2),
+ PLL_RATE(576000000, 96, 1, 2),
+ PLL_RATE(600000000, 50, 1, 1),
+ PLL_RATE(624000000, 52, 1, 1),
+ PLL_RATE(648000000, 54, 1, 1),
+ PLL_RATE(672000000, 56, 1, 1),
+ PLL_RATE(696000000, 58, 1, 1),
+ PLL_RATE(720000000, 60, 1, 1),
+ PLL_RATE(744000000, 62, 1, 1),
+ PLL_RATE(768000000, 64, 1, 1),
+ PLL_RATE(792000000, 66, 1, 1),
+ PLL_RATE(816000000, 68, 1, 1),
+ PLL_RATE(840000000, 70, 1, 1),
+ PLL_RATE(864000000, 72, 1, 1),
+ PLL_RATE(888000000, 74, 1, 1),
+ PLL_RATE(912000000, 76, 1, 1),
+ PLL_RATE(936000000, 78, 1, 1),
+ PLL_RATE(960000000, 80, 1, 1),
+ PLL_RATE(984000000, 82, 1, 1),
+ PLL_RATE(1008000000, 84, 1, 1),
+ PLL_RATE(1032000000, 86, 1, 1),
+ PLL_RATE(1056000000, 88, 1, 1),
+ PLL_RATE(1080000000, 90, 1, 1),
+ PLL_RATE(1104000000, 92, 1, 1),
+ PLL_RATE(1128000000, 94, 1, 1),
+ PLL_RATE(1152000000, 96, 1, 1),
+ PLL_RATE(1176000000, 98, 1, 1),
+ PLL_RATE(1200000000, 50, 1, 0),
+ PLL_RATE(1224000000, 51, 1, 0),
+ PLL_RATE(1248000000, 52, 1, 0),
+ PLL_RATE(1272000000, 53, 1, 0),
+ PLL_RATE(1296000000, 54, 1, 0),
+ PLL_RATE(1320000000, 55, 1, 0),
+ PLL_RATE(1344000000, 56, 1, 0),
+ PLL_RATE(1368000000, 57, 1, 0),
+ PLL_RATE(1392000000, 58, 1, 0),
+ PLL_RATE(1416000000, 59, 1, 0),
+ PLL_RATE(1440000000, 60, 1, 0),
+ PLL_RATE(1464000000, 61, 1, 0),
+ PLL_RATE(1488000000, 62, 1, 0),
+ PLL_RATE(1512000000, 63, 1, 0),
+ PLL_RATE(1536000000, 64, 1, 0),
+ PLL_RATE(1560000000, 65, 1, 0),
+ PLL_RATE(1584000000, 66, 1, 0),
+ PLL_RATE(1608000000, 67, 1, 0),
+ PLL_RATE(1632000000, 68, 1, 0),
+ PLL_RATE(1656000000, 68, 1, 0),
+ PLL_RATE(1680000000, 68, 1, 0),
+ PLL_RATE(1704000000, 68, 1, 0),
+ PLL_RATE(1728000000, 69, 1, 0),
+ PLL_RATE(1752000000, 69, 1, 0),
+ PLL_RATE(1776000000, 69, 1, 0),
+ PLL_RATE(1800000000, 69, 1, 0),
+ PLL_RATE(1824000000, 70, 1, 0),
+ PLL_RATE(1848000000, 70, 1, 0),
+ PLL_RATE(1872000000, 70, 1, 0),
+ PLL_RATE(1896000000, 70, 1, 0),
+ PLL_RATE(1920000000, 71, 1, 0),
+ PLL_RATE(1944000000, 71, 1, 0),
+ PLL_RATE(1968000000, 71, 1, 0),
+ PLL_RATE(1992000000, 71, 1, 0),
+ PLL_RATE(2016000000, 72, 1, 0),
+ PLL_RATE(2040000000, 72, 1, 0),
+ PLL_RATE(2064000000, 72, 1, 0),
+ PLL_RATE(2088000000, 72, 1, 0),
+ PLL_RATE(2112000000, 73, 1, 0),
+ { /* sentinel */ },
+};
+
+static struct meson_clk_pll axg_fixed_pll = {
+ .m = {
+ .reg_off = HHI_MPLL_CNTL,
+ .shift = 0,
+ .width = 9,
+ },
+ .n = {
+ .reg_off = HHI_MPLL_CNTL,
+ .shift = 9,
+ .width = 5,
+ },
+ .od = {
+ .reg_off = HHI_MPLL_CNTL,
+ .shift = 16,
+ .width = 2,
+ },
+ .lock = &clk_lock,
+ .hw.init = &(struct clk_init_data){
+ .name = "fixed_pll",
+ .ops = &meson_clk_pll_ro_ops,
+ .parent_names = (const char *[]){ "xtal" },
+ .num_parents = 1,
+ .flags = CLK_GET_RATE_NOCACHE,
+ },
+};
+
+static struct meson_clk_pll axg_sys_pll = {
+ .m = {
+ .reg_off = HHI_SYS_PLL_CNTL,
+ .shift = 0,
+ .width = 9,
+ },
+ .n = {
+ .reg_off = HHI_SYS_PLL_CNTL,
+ .shift = 9,
+ .width = 5,
+ },
+ .od = {
+ .reg_off = HHI_SYS_PLL_CNTL,
+ .shift = 10,
+ .width = 2,
+ },
+ .rate_table = sys_pll_rate_table,
+ .rate_count = ARRAY_SIZE(sys_pll_rate_table),
+ .lock = &clk_lock,
+ .hw.init = &(struct clk_init_data){
+ .name = "sys_pll",
+ .ops = &meson_clk_pll_ro_ops,
+ .parent_names = (const char *[]){ "xtal" },
+ .num_parents = 1,
+ .flags = CLK_GET_RATE_NOCACHE,
+ },
+};
+
+static const struct pll_rate_table axg_gp0_pll_rate_table[] = {
+ PLL_RATE(240000000, 40, 1, 2),
+ PLL_RATE(246000000, 41, 1, 2),
+ PLL_RATE(252000000, 42, 1, 2),
+ PLL_RATE(258000000, 43, 1, 2),
+ PLL_RATE(264000000, 44, 1, 2),
+ PLL_RATE(270000000, 45, 1, 2),
+ PLL_RATE(276000000, 46, 1, 2),
+ PLL_RATE(282000000, 47, 1, 2),
+ PLL_RATE(288000000, 48, 1, 2),
+ PLL_RATE(294000000, 49, 1, 2),
+ PLL_RATE(300000000, 50, 1, 2),
+ PLL_RATE(306000000, 51, 1, 2),
+ PLL_RATE(312000000, 52, 1, 2),
+ PLL_RATE(318000000, 53, 1, 2),
+ PLL_RATE(324000000, 54, 1, 2),
+ PLL_RATE(330000000, 55, 1, 2),
+ PLL_RATE(336000000, 56, 1, 2),
+ PLL_RATE(342000000, 57, 1, 2),
+ PLL_RATE(348000000, 58, 1, 2),
+ PLL_RATE(354000000, 59, 1, 2),
+ PLL_RATE(360000000, 60, 1, 2),
+ PLL_RATE(366000000, 61, 1, 2),
+ PLL_RATE(372000000, 62, 1, 2),
+ PLL_RATE(378000000, 63, 1, 2),
+ PLL_RATE(384000000, 64, 1, 2),
+ PLL_RATE(390000000, 65, 1, 3),
+ PLL_RATE(396000000, 66, 1, 3),
+ PLL_RATE(402000000, 67, 1, 3),
+ PLL_RATE(408000000, 68, 1, 3),
+ PLL_RATE(480000000, 40, 1, 1),
+ PLL_RATE(492000000, 41, 1, 1),
+ PLL_RATE(504000000, 42, 1, 1),
+ PLL_RATE(516000000, 43, 1, 1),
+ PLL_RATE(528000000, 44, 1, 1),
+ PLL_RATE(540000000, 45, 1, 1),
+ PLL_RATE(552000000, 46, 1, 1),
+ PLL_RATE(564000000, 47, 1, 1),
+ PLL_RATE(576000000, 48, 1, 1),
+ PLL_RATE(588000000, 49, 1, 1),
+ PLL_RATE(600000000, 50, 1, 1),
+ PLL_RATE(612000000, 51, 1, 1),
+ PLL_RATE(624000000, 52, 1, 1),
+ PLL_RATE(636000000, 53, 1, 1),
+ PLL_RATE(648000000, 54, 1, 1),
+ PLL_RATE(660000000, 55, 1, 1),
+ PLL_RATE(672000000, 56, 1, 1),
+ PLL_RATE(684000000, 57, 1, 1),
+ PLL_RATE(696000000, 58, 1, 1),
+ PLL_RATE(708000000, 59, 1, 1),
+ PLL_RATE(720000000, 60, 1, 1),
+ PLL_RATE(732000000, 61, 1, 1),
+ PLL_RATE(744000000, 62, 1, 1),
+ PLL_RATE(756000000, 63, 1, 1),
+ PLL_RATE(768000000, 64, 1, 1),
+ PLL_RATE(780000000, 65, 1, 1),
+ PLL_RATE(792000000, 66, 1, 1),
+ PLL_RATE(804000000, 67, 1, 1),
+ PLL_RATE(816000000, 68, 1, 1),
+ PLL_RATE(960000000, 40, 1, 0),
+ PLL_RATE(984000000, 41, 1, 0),
+ PLL_RATE(1008000000, 42, 1, 0),
+ PLL_RATE(1032000000, 43, 1, 0),
+ PLL_RATE(1056000000, 44, 1, 0),
+ PLL_RATE(1080000000, 45, 1, 0),
+ PLL_RATE(1104000000, 46, 1, 0),
+ PLL_RATE(1128000000, 47, 1, 0),
+ PLL_RATE(1152000000, 48, 1, 0),
+ PLL_RATE(1176000000, 49, 1, 0),
+ PLL_RATE(1200000000, 50, 1, 0),
+ PLL_RATE(1224000000, 51, 1, 0),
+ PLL_RATE(1248000000, 52, 1, 0),
+ PLL_RATE(1272000000, 53, 1, 0),
+ PLL_RATE(1296000000, 54, 1, 0),
+ PLL_RATE(1320000000, 55, 1, 0),
+ PLL_RATE(1344000000, 56, 1, 0),
+ PLL_RATE(1368000000, 57, 1, 0),
+ PLL_RATE(1392000000, 58, 1, 0),
+ PLL_RATE(1416000000, 59, 1, 0),
+ PLL_RATE(1440000000, 60, 1, 0),
+ PLL_RATE(1464000000, 61, 1, 0),
+ PLL_RATE(1488000000, 62, 1, 0),
+ PLL_RATE(1512000000, 63, 1, 0),
+ PLL_RATE(1536000000, 64, 1, 0),
+ PLL_RATE(1560000000, 65, 1, 0),
+ PLL_RATE(1584000000, 66, 1, 0),
+ PLL_RATE(1608000000, 67, 1, 0),
+ PLL_RATE(1632000000, 68, 1, 0),
+ { /* sentinel */ },
+};
+
+struct pll_params_table axg_gp0_params_table[] = {
+ PLL_PARAM(HHI_GP0_PLL_CNTL, 0x40010250),
+ PLL_PARAM(HHI_GP0_PLL_CNTL1, 0xc084a000),
+ PLL_PARAM(HHI_GP0_PLL_CNTL2, 0xb75020be),
+ PLL_PARAM(HHI_GP0_PLL_CNTL3, 0x0a59a288),
+ PLL_PARAM(HHI_GP0_PLL_CNTL4, 0xc000004d),
+ PLL_PARAM(HHI_GP0_PLL_CNTL5, 0x00078000),
+};
+
+static struct meson_clk_pll axg_gp0_pll = {
+ .m = {
+ .reg_off = HHI_GP0_PLL_CNTL,
+ .shift = 0,
+ .width = 9,
+ },
+ .n = {
+ .reg_off = HHI_GP0_PLL_CNTL,
+ .shift = 9,
+ .width = 5,
+ },
+ .od = {
+ .reg_off = HHI_GP0_PLL_CNTL,
+ .shift = 16,
+ .width = 2,
+ },
+ .params = {
+ .params_table = axg_gp0_params_table,
+ .params_count = ARRAY_SIZE(axg_gp0_params_table),
+ .no_init_reset = true,
+ .reset_lock_loop = true,
+ },
+ .rate_table = axg_gp0_pll_rate_table,
+ .rate_count = ARRAY_SIZE(axg_gp0_pll_rate_table),
+ .lock = &clk_lock,
+ .hw.init = &(struct clk_init_data){
+ .name = "gp0_pll",
+ .ops = &meson_clk_pll_ops,
+ .parent_names = (const char *[]){ "xtal" },
+ .num_parents = 1,
+ .flags = CLK_GET_RATE_NOCACHE,
+ },
+};
+
+
+static struct clk_fixed_factor axg_fclk_div2 = {
+ .mult = 1,
+ .div = 2,
+ .hw.init = &(struct clk_init_data){
+ .name = "fclk_div2",
+ .ops = &clk_fixed_factor_ops,
+ .parent_names = (const char *[]){ "fixed_pll" },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_fixed_factor axg_fclk_div3 = {
+ .mult = 1,
+ .div = 3,
+ .hw.init = &(struct clk_init_data){
+ .name = "fclk_div3",
+ .ops = &clk_fixed_factor_ops,
+ .parent_names = (const char *[]){ "fixed_pll" },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_fixed_factor axg_fclk_div4 = {
+ .mult = 1,
+ .div = 4,
+ .hw.init = &(struct clk_init_data){
+ .name = "fclk_div4",
+ .ops = &clk_fixed_factor_ops,
+ .parent_names = (const char *[]){ "fixed_pll" },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_fixed_factor axg_fclk_div5 = {
+ .mult = 1,
+ .div = 5,
+ .hw.init = &(struct clk_init_data){
+ .name = "fclk_div5",
+ .ops = &clk_fixed_factor_ops,
+ .parent_names = (const char *[]){ "fixed_pll" },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_fixed_factor axg_fclk_div7 = {
+ .mult = 1,
+ .div = 7,
+ .hw.init = &(struct clk_init_data){
+ .name = "fclk_div7",
+ .ops = &clk_fixed_factor_ops,
+ .parent_names = (const char *[]){ "fixed_pll" },
+ .num_parents = 1,
+ },
+};
+
+static struct meson_clk_mpll axg_mpll0 = {
+ .sdm = {
+ .reg_off = HHI_MPLL_CNTL7,
+ .shift = 0,
+ .width = 14,
+ },
+ .sdm_en = {
+ .reg_off = HHI_MPLL_CNTL7,
+ .shift = 15,
+ .width = 1,
+ },
+ .n2 = {
+ .reg_off = HHI_MPLL_CNTL7,
+ .shift = 16,
+ .width = 9,
+ },
+ .en = {
+ .reg_off = HHI_MPLL_CNTL7,
+ .shift = 14,
+ .width = 1,
+ },
+ .ssen = {
+ .reg_off = HHI_MPLL_CNTL,
+ .shift = 25,
+ .width = 1,
+ },
+ .lock = &clk_lock,
+ .hw.init = &(struct clk_init_data){
+ .name = "mpll0",
+ .ops = &meson_clk_mpll_ops,
+ .parent_names = (const char *[]){ "fixed_pll" },
+ .num_parents = 1,
+ },
+};
+
+static struct meson_clk_mpll axg_mpll1 = {
+ .sdm = {
+ .reg_off = HHI_MPLL_CNTL8,
+ .shift = 0,
+ .width = 14,
+ },
+ .sdm_en = {
+ .reg_off = HHI_MPLL_CNTL8,
+ .shift = 15,
+ .width = 1,
+ },
+ .n2 = {
+ .reg_off = HHI_MPLL_CNTL8,
+ .shift = 16,
+ .width = 9,
+ },
+ .en = {
+ .reg_off = HHI_MPLL_CNTL8,
+ .shift = 14,
+ .width = 1,
+ },
+ .lock = &clk_lock,
+ .hw.init = &(struct clk_init_data){
+ .name = "mpll1",
+ .ops = &meson_clk_mpll_ops,
+ .parent_names = (const char *[]){ "fixed_pll" },
+ .num_parents = 1,
+ },
+};
+
+static struct meson_clk_mpll axg_mpll2 = {
+ .sdm = {
+ .reg_off = HHI_MPLL_CNTL9,
+ .shift = 0,
+ .width = 14,
+ },
+ .sdm_en = {
+ .reg_off = HHI_MPLL_CNTL9,
+ .shift = 15,
+ .width = 1,
+ },
+ .n2 = {
+ .reg_off = HHI_MPLL_CNTL9,
+ .shift = 16,
+ .width = 9,
+ },
+ .en = {
+ .reg_off = HHI_MPLL_CNTL9,
+ .shift = 14,
+ .width = 1,
+ },
+ .lock = &clk_lock,
+ .hw.init = &(struct clk_init_data){
+ .name = "mpll2",
+ .ops = &meson_clk_mpll_ops,
+ .parent_names = (const char *[]){ "fixed_pll" },
+ .num_parents = 1,
+ },
+};
+
+static struct meson_clk_mpll axg_mpll3 = {
+ .sdm = {
+ .reg_off = HHI_MPLL3_CNTL0,
+ .shift = 12,
+ .width = 14,
+ },
+ .sdm_en = {
+ .reg_off = HHI_MPLL3_CNTL0,
+ .shift = 11,
+ .width = 1,
+ },
+ .n2 = {
+ .reg_off = HHI_MPLL3_CNTL0,
+ .shift = 2,
+ .width = 9,
+ },
+ .en = {
+ .reg_off = HHI_MPLL3_CNTL0,
+ .shift = 0,
+ .width = 1,
+ },
+ .lock = &clk_lock,
+ .hw.init = &(struct clk_init_data){
+ .name = "mpll3",
+ .ops = &meson_clk_mpll_ops,
+ .parent_names = (const char *[]){ "fixed_pll" },
+ .num_parents = 1,
+ },
+};
+
+/*
+ * FIXME The legacy composite clocks (e.g. clk81) are both PLL post-dividers
+ * and should be modeled with their respective PLLs via the forthcoming
+ * coordinated clock rates feature
+ */
+static u32 mux_table_clk81[] = { 0, 2, 3, 4, 5, 6, 7 };
+static const char * const clk81_parent_names[] = {
+ "xtal", "fclk_div7", "mpll1", "mpll2", "fclk_div4",
+ "fclk_div3", "fclk_div5"
+};
+
+static struct clk_mux axg_mpeg_clk_sel = {
+ .reg = (void *)HHI_MPEG_CLK_CNTL,
+ .mask = 0x7,
+ .shift = 12,
+ .flags = CLK_MUX_READ_ONLY,
+ .table = mux_table_clk81,
+ .lock = &clk_lock,
+ .hw.init = &(struct clk_init_data){
+ .name = "mpeg_clk_sel",
+ .ops = &clk_mux_ro_ops,
+ /*
+ * bits 14:12 selects from 8 possible parents:
+ * xtal, 1'b0 (wtf), fclk_div7, mpll_clkout1, mpll_clkout2,
+ * fclk_div4, fclk_div3, fclk_div5
+ */
+ .parent_names = clk81_parent_names,
+ .num_parents = ARRAY_SIZE(clk81_parent_names),
+ .flags = CLK_SET_RATE_NO_REPARENT,
+ },
+};
+
+static struct clk_divider axg_mpeg_clk_div = {
+ .reg = (void *)HHI_MPEG_CLK_CNTL,
+ .shift = 0,
+ .width = 7,
+ .lock = &clk_lock,
+ .hw.init = &(struct clk_init_data){
+ .name = "mpeg_clk_div",
+ .ops = &clk_divider_ops,
+ .parent_names = (const char *[]){ "mpeg_clk_sel" },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_gate axg_clk81 = {
+ .reg = (void *)HHI_MPEG_CLK_CNTL,
+ .bit_idx = 7,
+ .lock = &clk_lock,
+ .hw.init = &(struct clk_init_data){
+ .name = "clk81",
+ .ops = &clk_gate_ops,
+ .parent_names = (const char *[]){ "mpeg_clk_div" },
+ .num_parents = 1,
+ .flags = (CLK_SET_RATE_PARENT | CLK_IS_CRITICAL),
+ },
+};
+
+static const char * const axg_sd_emmc_clk0_parent_names[] = {
+ "xtal", "fclk_div2", "fclk_div3", "fclk_div5", "fclk_div7",
+
+ /*
+ * Following these parent clocks, we should also have had mpll2, mpll3
+ * and gp0_pll but these clocks are too precious to be used here. All
+ * the necessary rates for MMC and NAND operation can be acheived using
+ * xtal or fclk_div clocks
+ */
+};
+
+/* SDcard clock */
+static struct clk_mux axg_sd_emmc_b_clk0_sel = {
+ .reg = (void *)HHI_SD_EMMC_CLK_CNTL,
+ .mask = 0x7,
+ .shift = 25,
+ .lock = &clk_lock,
+ .hw.init = &(struct clk_init_data) {
+ .name = "sd_emmc_b_clk0_sel",
+ .ops = &clk_mux_ops,
+ .parent_names = axg_sd_emmc_clk0_parent_names,
+ .num_parents = ARRAY_SIZE(axg_sd_emmc_clk0_parent_names),
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_divider axg_sd_emmc_b_clk0_div = {
+ .reg = (void *)HHI_SD_EMMC_CLK_CNTL,
+ .shift = 16,
+ .width = 7,
+ .lock = &clk_lock,
+ .flags = CLK_DIVIDER_ROUND_CLOSEST,
+ .hw.init = &(struct clk_init_data) {
+ .name = "sd_emmc_b_clk0_div",
+ .ops = &clk_divider_ops,
+ .parent_names = (const char *[]){ "sd_emmc_b_clk0_sel" },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_gate axg_sd_emmc_b_clk0 = {
+ .reg = (void *)HHI_SD_EMMC_CLK_CNTL,
+ .bit_idx = 23,
+ .lock = &clk_lock,
+ .hw.init = &(struct clk_init_data){
+ .name = "sd_emmc_b_clk0",
+ .ops = &clk_gate_ops,
+ .parent_names = (const char *[]){ "sd_emmc_b_clk0_div" },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+/* EMMC/NAND clock */
+static struct clk_mux axg_sd_emmc_c_clk0_sel = {
+ .reg = (void *)HHI_NAND_CLK_CNTL,
+ .mask = 0x7,
+ .shift = 9,
+ .lock = &clk_lock,
+ .hw.init = &(struct clk_init_data) {
+ .name = "sd_emmc_c_clk0_sel",
+ .ops = &clk_mux_ops,
+ .parent_names = axg_sd_emmc_clk0_parent_names,
+ .num_parents = ARRAY_SIZE(axg_sd_emmc_clk0_parent_names),
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_divider axg_sd_emmc_c_clk0_div = {
+ .reg = (void *)HHI_NAND_CLK_CNTL,
+ .shift = 0,
+ .width = 7,
+ .lock = &clk_lock,
+ .flags = CLK_DIVIDER_ROUND_CLOSEST,
+ .hw.init = &(struct clk_init_data) {
+ .name = "sd_emmc_c_clk0_div",
+ .ops = &clk_divider_ops,
+ .parent_names = (const char *[]){ "sd_emmc_c_clk0_sel" },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_gate axg_sd_emmc_c_clk0 = {
+ .reg = (void *)HHI_NAND_CLK_CNTL,
+ .bit_idx = 7,
+ .lock = &clk_lock,
+ .hw.init = &(struct clk_init_data){
+ .name = "sd_emmc_c_clk0",
+ .ops = &clk_gate_ops,
+ .parent_names = (const char *[]){ "sd_emmc_c_clk0_div" },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+/* Everything Else (EE) domain gates */
+static MESON_GATE(axg_ddr, HHI_GCLK_MPEG0, 0);
+static MESON_GATE(axg_audio_locker, HHI_GCLK_MPEG0, 2);
+static MESON_GATE(axg_mipi_dsi_host, HHI_GCLK_MPEG0, 3);
+static MESON_GATE(axg_isa, HHI_GCLK_MPEG0, 5);
+static MESON_GATE(axg_pl301, HHI_GCLK_MPEG0, 6);
+static MESON_GATE(axg_periphs, HHI_GCLK_MPEG0, 7);
+static MESON_GATE(axg_spicc_0, HHI_GCLK_MPEG0, 8);
+static MESON_GATE(axg_i2c, HHI_GCLK_MPEG0, 9);
+static MESON_GATE(axg_rng0, HHI_GCLK_MPEG0, 12);
+static MESON_GATE(axg_uart0, HHI_GCLK_MPEG0, 13);
+static MESON_GATE(axg_mipi_dsi_phy, HHI_GCLK_MPEG0, 14);
+static MESON_GATE(axg_spicc_1, HHI_GCLK_MPEG0, 15);
+static MESON_GATE(axg_pcie_a, HHI_GCLK_MPEG0, 16);
+static MESON_GATE(axg_pcie_b, HHI_GCLK_MPEG0, 17);
+static MESON_GATE(axg_hiu_reg, HHI_GCLK_MPEG0, 19);
+static MESON_GATE(axg_assist_misc, HHI_GCLK_MPEG0, 23);
+static MESON_GATE(axg_emmc_b, HHI_GCLK_MPEG0, 25);
+static MESON_GATE(axg_emmc_c, HHI_GCLK_MPEG0, 26);
+static MESON_GATE(axg_dma, HHI_GCLK_MPEG0, 27);
+static MESON_GATE(axg_spi, HHI_GCLK_MPEG0, 30);
+
+static MESON_GATE(axg_audio, HHI_GCLK_MPEG1, 0);
+static MESON_GATE(axg_eth_core, HHI_GCLK_MPEG1, 3);
+static MESON_GATE(axg_uart1, HHI_GCLK_MPEG1, 16);
+static MESON_GATE(axg_g2d, HHI_GCLK_MPEG1, 20);
+static MESON_GATE(axg_usb0, HHI_GCLK_MPEG1, 21);
+static MESON_GATE(axg_usb1, HHI_GCLK_MPEG1, 22);
+static MESON_GATE(axg_reset, HHI_GCLK_MPEG1, 23);
+static MESON_GATE(axg_usb_general, HHI_GCLK_MPEG1, 26);
+static MESON_GATE(axg_ahb_arb0, HHI_GCLK_MPEG1, 29);
+static MESON_GATE(axg_efuse, HHI_GCLK_MPEG1, 30);
+static MESON_GATE(axg_boot_rom, HHI_GCLK_MPEG1, 31);
+
+static MESON_GATE(axg_ahb_data_bus, HHI_GCLK_MPEG2, 1);
+static MESON_GATE(axg_ahb_ctrl_bus, HHI_GCLK_MPEG2, 2);
+static MESON_GATE(axg_usb1_to_ddr, HHI_GCLK_MPEG2, 8);
+static MESON_GATE(axg_usb0_to_ddr, HHI_GCLK_MPEG2, 9);
+static MESON_GATE(axg_mmc_pclk, HHI_GCLK_MPEG2, 11);
+static MESON_GATE(axg_vpu_intr, HHI_GCLK_MPEG2, 25);
+static MESON_GATE(axg_sec_ahb_ahb3_bridge, HHI_GCLK_MPEG2, 26);
+static MESON_GATE(axg_gic, HHI_GCLK_MPEG2, 30);
+
+/* Always On (AO) domain gates */
+
+static MESON_GATE(axg_ao_media_cpu, HHI_GCLK_AO, 0);
+static MESON_GATE(axg_ao_ahb_sram, HHI_GCLK_AO, 1);
+static MESON_GATE(axg_ao_ahb_bus, HHI_GCLK_AO, 2);
+static MESON_GATE(axg_ao_iface, HHI_GCLK_AO, 3);
+static MESON_GATE(axg_ao_i2c, HHI_GCLK_AO, 4);
+
+/* Array of all clocks provided by this provider */
+
+static struct clk_hw_onecell_data axg_hw_onecell_data = {
+ .hws = {
+ [CLKID_SYS_PLL] = &axg_sys_pll.hw,
+ [CLKID_FIXED_PLL] = &axg_fixed_pll.hw,
+ [CLKID_FCLK_DIV2] = &axg_fclk_div2.hw,
+ [CLKID_FCLK_DIV3] = &axg_fclk_div3.hw,
+ [CLKID_FCLK_DIV4] = &axg_fclk_div4.hw,
+ [CLKID_FCLK_DIV5] = &axg_fclk_div5.hw,
+ [CLKID_FCLK_DIV7] = &axg_fclk_div7.hw,
+ [CLKID_GP0_PLL] = &axg_gp0_pll.hw,
+ [CLKID_MPEG_SEL] = &axg_mpeg_clk_sel.hw,
+ [CLKID_MPEG_DIV] = &axg_mpeg_clk_div.hw,
+ [CLKID_CLK81] = &axg_clk81.hw,
+ [CLKID_MPLL0] = &axg_mpll0.hw,
+ [CLKID_MPLL1] = &axg_mpll1.hw,
+ [CLKID_MPLL2] = &axg_mpll2.hw,
+ [CLKID_MPLL3] = &axg_mpll3.hw,
+ [CLKID_DDR] = &axg_ddr.hw,
+ [CLKID_AUDIO_LOCKER] = &axg_audio_locker.hw,
+ [CLKID_MIPI_DSI_HOST] = &axg_mipi_dsi_host.hw,
+ [CLKID_ISA] = &axg_isa.hw,
+ [CLKID_PL301] = &axg_pl301.hw,
+ [CLKID_PERIPHS] = &axg_periphs.hw,
+ [CLKID_SPICC0] = &axg_spicc_0.hw,
+ [CLKID_I2C] = &axg_i2c.hw,
+ [CLKID_RNG0] = &axg_rng0.hw,
+ [CLKID_UART0] = &axg_uart0.hw,
+ [CLKID_MIPI_DSI_PHY] = &axg_mipi_dsi_phy.hw,
+ [CLKID_SPICC1] = &axg_spicc_1.hw,
+ [CLKID_PCIE_A] = &axg_pcie_a.hw,
+ [CLKID_PCIE_B] = &axg_pcie_b.hw,
+ [CLKID_HIU_IFACE] = &axg_hiu_reg.hw,
+ [CLKID_ASSIST_MISC] = &axg_assist_misc.hw,
+ [CLKID_SD_EMMC_B] = &axg_emmc_b.hw,
+ [CLKID_SD_EMMC_C] = &axg_emmc_c.hw,
+ [CLKID_DMA] = &axg_dma.hw,
+ [CLKID_SPI] = &axg_spi.hw,
+ [CLKID_AUDIO] = &axg_audio.hw,
+ [CLKID_ETH] = &axg_eth_core.hw,
+ [CLKID_UART1] = &axg_uart1.hw,
+ [CLKID_G2D] = &axg_g2d.hw,
+ [CLKID_USB0] = &axg_usb0.hw,
+ [CLKID_USB1] = &axg_usb1.hw,
+ [CLKID_RESET] = &axg_reset.hw,
+ [CLKID_USB] = &axg_usb_general.hw,
+ [CLKID_AHB_ARB0] = &axg_ahb_arb0.hw,
+ [CLKID_EFUSE] = &axg_efuse.hw,
+ [CLKID_BOOT_ROM] = &axg_boot_rom.hw,
+ [CLKID_AHB_DATA_BUS] = &axg_ahb_data_bus.hw,
+ [CLKID_AHB_CTRL_BUS] = &axg_ahb_ctrl_bus.hw,
+ [CLKID_USB1_DDR_BRIDGE] = &axg_usb1_to_ddr.hw,
+ [CLKID_USB0_DDR_BRIDGE] = &axg_usb0_to_ddr.hw,
+ [CLKID_MMC_PCLK] = &axg_mmc_pclk.hw,
+ [CLKID_VPU_INTR] = &axg_vpu_intr.hw,
+ [CLKID_SEC_AHB_AHB3_BRIDGE] = &axg_sec_ahb_ahb3_bridge.hw,
+ [CLKID_GIC] = &axg_gic.hw,
+ [CLKID_AO_MEDIA_CPU] = &axg_ao_media_cpu.hw,
+ [CLKID_AO_AHB_SRAM] = &axg_ao_ahb_sram.hw,
+ [CLKID_AO_AHB_BUS] = &axg_ao_ahb_bus.hw,
+ [CLKID_AO_IFACE] = &axg_ao_iface.hw,
+ [CLKID_AO_I2C] = &axg_ao_i2c.hw,
+ [CLKID_SD_EMMC_B_CLK0_SEL] = &axg_sd_emmc_b_clk0_sel.hw,
+ [CLKID_SD_EMMC_B_CLK0_DIV] = &axg_sd_emmc_b_clk0_div.hw,
+ [CLKID_SD_EMMC_B_CLK0] = &axg_sd_emmc_b_clk0.hw,
+ [CLKID_SD_EMMC_C_CLK0_SEL] = &axg_sd_emmc_c_clk0_sel.hw,
+ [CLKID_SD_EMMC_C_CLK0_DIV] = &axg_sd_emmc_c_clk0_div.hw,
+ [CLKID_SD_EMMC_C_CLK0] = &axg_sd_emmc_c_clk0.hw,
+ [NR_CLKS] = NULL,
+ },
+ .num = NR_CLKS,
+};
+
+/* Convenience tables to populate base addresses in .probe */
+
+static struct meson_clk_pll *const axg_clk_plls[] = {
+ &axg_fixed_pll,
+ &axg_sys_pll,
+ &axg_gp0_pll,
+};
+
+static struct meson_clk_mpll *const axg_clk_mplls[] = {
+ &axg_mpll0,
+ &axg_mpll1,
+ &axg_mpll2,
+ &axg_mpll3,
+};
+
+static struct clk_gate *const axg_clk_gates[] = {
+ &axg_clk81,
+ &axg_ddr,
+ &axg_audio_locker,
+ &axg_mipi_dsi_host,
+ &axg_isa,
+ &axg_pl301,
+ &axg_periphs,
+ &axg_spicc_0,
+ &axg_i2c,
+ &axg_rng0,
+ &axg_uart0,
+ &axg_mipi_dsi_phy,
+ &axg_spicc_1,
+ &axg_pcie_a,
+ &axg_pcie_b,
+ &axg_hiu_reg,
+ &axg_assist_misc,
+ &axg_emmc_b,
+ &axg_emmc_c,
+ &axg_dma,
+ &axg_spi,
+ &axg_audio,
+ &axg_eth_core,
+ &axg_uart1,
+ &axg_g2d,
+ &axg_usb0,
+ &axg_usb1,
+ &axg_reset,
+ &axg_usb_general,
+ &axg_ahb_arb0,
+ &axg_efuse,
+ &axg_boot_rom,
+ &axg_ahb_data_bus,
+ &axg_ahb_ctrl_bus,
+ &axg_usb1_to_ddr,
+ &axg_usb0_to_ddr,
+ &axg_mmc_pclk,
+ &axg_vpu_intr,
+ &axg_sec_ahb_ahb3_bridge,
+ &axg_gic,
+ &axg_ao_media_cpu,
+ &axg_ao_ahb_sram,
+ &axg_ao_ahb_bus,
+ &axg_ao_iface,
+ &axg_ao_i2c,
+ &axg_sd_emmc_b_clk0,
+ &axg_sd_emmc_c_clk0,
+};
+
+static struct clk_mux *const axg_clk_muxes[] = {
+ &axg_mpeg_clk_sel,
+ &axg_sd_emmc_b_clk0_sel,
+ &axg_sd_emmc_c_clk0_sel,
+};
+
+static struct clk_divider *const axg_clk_dividers[] = {
+ &axg_mpeg_clk_div,
+ &axg_sd_emmc_b_clk0_div,
+ &axg_sd_emmc_c_clk0_div,
+};
+
+struct clkc_data {
+ struct clk_gate *const *clk_gates;
+ unsigned int clk_gates_count;
+ struct meson_clk_mpll *const *clk_mplls;
+ unsigned int clk_mplls_count;
+ struct meson_clk_pll *const *clk_plls;
+ unsigned int clk_plls_count;
+ struct clk_mux *const *clk_muxes;
+ unsigned int clk_muxes_count;
+ struct clk_divider *const *clk_dividers;
+ unsigned int clk_dividers_count;
+ struct clk_hw_onecell_data *hw_onecell_data;
+};
+
+static const struct clkc_data axg_clkc_data = {
+ .clk_gates = axg_clk_gates,
+ .clk_gates_count = ARRAY_SIZE(axg_clk_gates),
+ .clk_mplls = axg_clk_mplls,
+ .clk_mplls_count = ARRAY_SIZE(axg_clk_mplls),
+ .clk_plls = axg_clk_plls,
+ .clk_plls_count = ARRAY_SIZE(axg_clk_plls),
+ .clk_muxes = axg_clk_muxes,
+ .clk_muxes_count = ARRAY_SIZE(axg_clk_muxes),
+ .clk_dividers = axg_clk_dividers,
+ .clk_dividers_count = ARRAY_SIZE(axg_clk_dividers),
+ .hw_onecell_data = &axg_hw_onecell_data,
+};
+
+static const struct of_device_id clkc_match_table[] = {
+ { .compatible = "amlogic,axg-clkc", .data = &axg_clkc_data },
+ {}
+};
+
+static int axg_clkc_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ const struct clkc_data *clkc_data;
+ struct resource *res;
+ void __iomem *clk_base;
+ int ret, clkid, i;
+
+ clkc_data = of_device_get_match_data(&pdev->dev);
+ if (!clkc_data)
+ return -EINVAL;
+
+ /* Generic clocks and PLLs */
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ clk_base = devm_ioremap(&pdev->dev, res->start, resource_size(res));
+ if (IS_ERR(clk_base)) {
+ dev_err(&pdev->dev, "Unable to map clk base\n");
+ return -ENXIO;
+ }
+
+ /* Populate base address for PLLs */
+ for (i = 0; i < clkc_data->clk_plls_count; i++)
+ clkc_data->clk_plls[i]->base = clk_base;
+
+ /* Populate base address for MPLLs */
+ for (i = 0; i < clkc_data->clk_mplls_count; i++)
+ clkc_data->clk_mplls[i]->base = clk_base;
+
+ /* Populate base address for gates */
+ for (i = 0; i < clkc_data->clk_gates_count; i++)
+ clkc_data->clk_gates[i]->reg = clk_base +
+ (u64)clkc_data->clk_gates[i]->reg;
+
+ /* Populate base address for muxes */
+ for (i = 0; i < clkc_data->clk_muxes_count; i++)
+ clkc_data->clk_muxes[i]->reg = clk_base +
+ (u64)clkc_data->clk_muxes[i]->reg;
+
+ /* Populate base address for dividers */
+ for (i = 0; i < clkc_data->clk_dividers_count; i++)
+ clkc_data->clk_dividers[i]->reg = clk_base +
+ (u64)clkc_data->clk_dividers[i]->reg;
+
+ for (clkid = 0; clkid < clkc_data->hw_onecell_data->num; clkid++) {
+ /* array might be sparse */
+ if (!clkc_data->hw_onecell_data->hws[clkid])
+ continue;
+
+ ret = devm_clk_hw_register(dev,
+ clkc_data->hw_onecell_data->hws[clkid]);
+ if (ret) {
+ dev_err(&pdev->dev, "Clock registration failed\n");
+ return ret;
+ }
+ }
+
+ return of_clk_add_hw_provider(dev->of_node, of_clk_hw_onecell_get,
+ clkc_data->hw_onecell_data);
+}
+
+static struct platform_driver axg_driver = {
+ .probe = axg_clkc_probe,
+ .driver = {
+ .name = "axg-clkc",
+ .of_match_table = clkc_match_table,
+ },
+};
+
+builtin_platform_driver(axg_driver);
diff --git a/drivers/clk/meson/axg.h b/drivers/clk/meson/axg.h
new file mode 100644
index 000000000000..ce0bafdb6b28
--- /dev/null
+++ b/drivers/clk/meson/axg.h
@@ -0,0 +1,126 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/*
+ * Copyright (c) 2016 AmLogic, Inc.
+ * Author: Michael Turquette <mturquette@baylibre.com>
+ *
+ * Copyright (c) 2017 Amlogic, inc.
+ * Author: Qiufang Dai <qiufang.dai@amlogic.com>
+ *
+ */
+#ifndef __AXG_H
+#define __AXG_H
+
+/*
+ * Clock controller register offsets
+ *
+ * Register offsets from the data sheet must be multiplied by 4 before
+ * adding them to the base address to get the right value.
+ */
+#define HHI_GP0_PLL_CNTL 0x40
+#define HHI_GP0_PLL_CNTL2 0x44
+#define HHI_GP0_PLL_CNTL3 0x48
+#define HHI_GP0_PLL_CNTL4 0x4c
+#define HHI_GP0_PLL_CNTL5 0x50
+#define HHI_GP0_PLL_STS 0x54
+#define HHI_GP0_PLL_CNTL1 0x58
+#define HHI_HIFI_PLL_CNTL 0x80
+#define HHI_HIFI_PLL_CNTL2 0x84
+#define HHI_HIFI_PLL_CNTL3 0x88
+#define HHI_HIFI_PLL_CNTL4 0x8C
+#define HHI_HIFI_PLL_CNTL5 0x90
+#define HHI_HIFI_PLL_STS 0x94
+#define HHI_HIFI_PLL_CNTL1 0x98
+
+#define HHI_XTAL_DIVN_CNTL 0xbc
+#define HHI_GCLK2_MPEG0 0xc0
+#define HHI_GCLK2_MPEG1 0xc4
+#define HHI_GCLK2_MPEG2 0xc8
+#define HHI_GCLK2_OTHER 0xd0
+#define HHI_GCLK2_AO 0xd4
+#define HHI_PCIE_PLL_CNTL 0xd8
+#define HHI_PCIE_PLL_CNTL1 0xdC
+#define HHI_PCIE_PLL_CNTL2 0xe0
+#define HHI_PCIE_PLL_CNTL3 0xe4
+#define HHI_PCIE_PLL_CNTL4 0xe8
+#define HHI_PCIE_PLL_CNTL5 0xec
+#define HHI_PCIE_PLL_CNTL6 0xf0
+#define HHI_PCIE_PLL_STS 0xf4
+
+#define HHI_MEM_PD_REG0 0x100
+#define HHI_VPU_MEM_PD_REG0 0x104
+#define HHI_VIID_CLK_DIV 0x128
+#define HHI_VIID_CLK_CNTL 0x12c
+
+#define HHI_GCLK_MPEG0 0x140
+#define HHI_GCLK_MPEG1 0x144
+#define HHI_GCLK_MPEG2 0x148
+#define HHI_GCLK_OTHER 0x150
+#define HHI_GCLK_AO 0x154
+#define HHI_SYS_CPU_CLK_CNTL1 0x15c
+#define HHI_SYS_CPU_RESET_CNTL 0x160
+#define HHI_VID_CLK_DIV 0x164
+#define HHI_SPICC_HCLK_CNTL 0x168
+
+#define HHI_MPEG_CLK_CNTL 0x174
+#define HHI_VID_CLK_CNTL 0x17c
+#define HHI_TS_CLK_CNTL 0x190
+#define HHI_VID_CLK_CNTL2 0x194
+#define HHI_SYS_CPU_CLK_CNTL0 0x19c
+#define HHI_VID_PLL_CLK_DIV 0x1a0
+#define HHI_VPU_CLK_CNTL 0x1bC
+
+#define HHI_VAPBCLK_CNTL 0x1F4
+
+#define HHI_GEN_CLK_CNTL 0x228
+
+#define HHI_VDIN_MEAS_CLK_CNTL 0x250
+#define HHI_NAND_CLK_CNTL 0x25C
+#define HHI_SD_EMMC_CLK_CNTL 0x264
+
+#define HHI_MPLL_CNTL 0x280
+#define HHI_MPLL_CNTL2 0x284
+#define HHI_MPLL_CNTL3 0x288
+#define HHI_MPLL_CNTL4 0x28C
+#define HHI_MPLL_CNTL5 0x290
+#define HHI_MPLL_CNTL6 0x294
+#define HHI_MPLL_CNTL7 0x298
+#define HHI_MPLL_CNTL8 0x29C
+#define HHI_MPLL_CNTL9 0x2A0
+#define HHI_MPLL_CNTL10 0x2A4
+
+#define HHI_MPLL3_CNTL0 0x2E0
+#define HHI_MPLL3_CNTL1 0x2E4
+#define HHI_PLL_TOP_MISC 0x2E8
+
+#define HHI_SYS_PLL_CNTL1 0x2FC
+#define HHI_SYS_PLL_CNTL 0x300
+#define HHI_SYS_PLL_CNTL2 0x304
+#define HHI_SYS_PLL_CNTL3 0x308
+#define HHI_SYS_PLL_CNTL4 0x30c
+#define HHI_SYS_PLL_CNTL5 0x310
+#define HHI_SYS_PLL_STS 0x314
+#define HHI_DPLL_TOP_I 0x318
+#define HHI_DPLL_TOP2_I 0x31C
+
+/*
+ * CLKID index values
+ *
+ * These indices are entirely contrived and do not map onto the hardware.
+ * It has now been decided to expose everything by default in the DT header:
+ * include/dt-bindings/clock/axg-clkc.h. Only the clocks ids we don't want
+ * to expose, such as the internal muxes and dividers of composite clocks,
+ * will remain defined here.
+ */
+#define CLKID_MPEG_SEL 8
+#define CLKID_MPEG_DIV 9
+#define CLKID_SD_EMMC_B_CLK0_SEL 61
+#define CLKID_SD_EMMC_B_CLK0_DIV 62
+#define CLKID_SD_EMMC_C_CLK0_SEL 63
+#define CLKID_SD_EMMC_C_CLK0_DIV 64
+
+#define NR_CLKS 65
+
+/* include the CLKIDs that have been made part of the DT binding */
+#include <dt-bindings/clock/axg-clkc.h>
+
+#endif /* __AXG_H */
--
2.15.1
^ permalink raw reply related
* [PATCH v6 2/6] clk: meson-axg: add clocks dt-bindings required header
From: Yixun Lan @ 2017-12-11 6:48 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20171211064853.32111-1-yixun.lan@amlogic.com>
From: Qiufang Dai <qiufang.dai@amlogic.com>
Add the required header for the clocks ID dt-bindings
exported from various subsystem in the Meson-AXG SoC.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
---
include/dt-bindings/clock/axg-clkc.h | 71 ++++++++++++++++++++++++++++++++++++
1 file changed, 71 insertions(+)
create mode 100644 include/dt-bindings/clock/axg-clkc.h
diff --git a/include/dt-bindings/clock/axg-clkc.h b/include/dt-bindings/clock/axg-clkc.h
new file mode 100644
index 000000000000..941ac70e7f30
--- /dev/null
+++ b/include/dt-bindings/clock/axg-clkc.h
@@ -0,0 +1,71 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/*
+ * Meson-AXG clock tree IDs
+ *
+ * Copyright (c) 2017 Amlogic, Inc. All rights reserved.
+ */
+
+#ifndef __AXG_CLKC_H
+#define __AXG_CLKC_H
+
+#define CLKID_SYS_PLL 0
+#define CLKID_FIXED_PLL 1
+#define CLKID_FCLK_DIV2 2
+#define CLKID_FCLK_DIV3 3
+#define CLKID_FCLK_DIV4 4
+#define CLKID_FCLK_DIV5 5
+#define CLKID_FCLK_DIV7 6
+#define CLKID_GP0_PLL 7
+#define CLKID_CLK81 10
+#define CLKID_MPLL0 11
+#define CLKID_MPLL1 12
+#define CLKID_MPLL2 13
+#define CLKID_MPLL3 14
+#define CLKID_DDR 15
+#define CLKID_AUDIO_LOCKER 16
+#define CLKID_MIPI_DSI_HOST 17
+#define CLKID_ISA 18
+#define CLKID_PL301 19
+#define CLKID_PERIPHS 20
+#define CLKID_SPICC0 21
+#define CLKID_I2C 22
+#define CLKID_RNG0 23
+#define CLKID_UART0 24
+#define CLKID_MIPI_DSI_PHY 25
+#define CLKID_SPICC1 26
+#define CLKID_PCIE_A 27
+#define CLKID_PCIE_B 28
+#define CLKID_HIU_IFACE 29
+#define CLKID_ASSIST_MISC 30
+#define CLKID_SD_EMMC_B 31
+#define CLKID_SD_EMMC_C 32
+#define CLKID_DMA 33
+#define CLKID_SPI 34
+#define CLKID_AUDIO 35
+#define CLKID_ETH 36
+#define CLKID_UART1 37
+#define CLKID_G2D 38
+#define CLKID_USB0 39
+#define CLKID_USB1 40
+#define CLKID_RESET 41
+#define CLKID_USB 42
+#define CLKID_AHB_ARB0 43
+#define CLKID_EFUSE 44
+#define CLKID_BOOT_ROM 45
+#define CLKID_AHB_DATA_BUS 46
+#define CLKID_AHB_CTRL_BUS 47
+#define CLKID_USB1_DDR_BRIDGE 48
+#define CLKID_USB0_DDR_BRIDGE 49
+#define CLKID_MMC_PCLK 50
+#define CLKID_VPU_INTR 51
+#define CLKID_SEC_AHB_AHB3_BRIDGE 52
+#define CLKID_GIC 53
+#define CLKID_AO_MEDIA_CPU 54
+#define CLKID_AO_AHB_SRAM 55
+#define CLKID_AO_AHB_BUS 56
+#define CLKID_AO_IFACE 57
+#define CLKID_AO_I2C 58
+#define CLKID_SD_EMMC_B_CLK0 59
+#define CLKID_SD_EMMC_C_CLK0 60
+
+#endif /* __AXG_CLKC_H */
--
2.15.1
^ permalink raw reply related
* [PATCH v6 1/6] dt-bindings: clock: add compatible variant for the Meson-AXG
From: Yixun Lan @ 2017-12-11 6:48 UTC (permalink / raw)
To: linux-arm-kernel
In-Reply-To: <20171211064853.32111-1-yixun.lan@amlogic.com>
Update the documentation to support clock driver for the Amlogic's
Meson-AXG SoC.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
---
Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt
index 924040769186..e2b377ed6f91 100644
--- a/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt
+++ b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt
@@ -5,8 +5,11 @@ controllers within the SoC.
Required Properties:
-- compatible: should be "amlogic,gxbb-clkc" for GXBB SoC,
- or "amlogic,gxl-clkc" for GXL and GXM SoC.
+- compatible: should be:
+ "amlogic,gxbb-clkc" for GXBB SoC,
+ "amlogic,gxl-clkc" for GXL and GXM SoC,
+ "amlogic,axg-clkc" for AXG SoC.
+
- reg: physical base address of the clock controller and length of memory
mapped region.
--
2.15.1
^ permalink raw reply related
* [PATCH v6 0/6] add clk controller driver for Meson-AXG SoC
From: Yixun Lan @ 2017-12-11 6:48 UTC (permalink / raw)
To: linux-arm-kernel
Add driver for the clk controller which found in Meson AXG SoC
Note, we deliberately create a seperate source file for the Meson AXG
series, instead of sharing code with previous GXBB/GXL - the file axg.c
It would help us maintaining the code more easily.
Changes since v5 [5]:
- add Rob's Ack for patch 2, add Neil's Ack for patch 3
- include spinlock' name change patch, patch 4
- include uart_ao clock DTS patch
Changes since v4 [4]:
- use devm_ioremap instead of devm_ioremap_resource
- rename DT node using generic name 'bus'
Changes since v3 [3]:
- separate dt-bindings header file
- adjust license note as standard way
- replace of_iomap with platform/devm API
- add Rob's Ack to Patch 1,4
Changes since v2 [2]:
- drop register offset calculation
- update dt-bindings for new compatible variant
Changes since v1 [1]:
- rework register definion, use '(offset << 2)' to better match
the description from data sheet
- drop "#include dt-bindings/clock/gxbb-aoclkc.h" from dts
- rebase code to v4.15-rc1
[5]
http://lists.infradead.org/pipermail/linux-amlogic/2017-December/005655.html
http://lists.infradead.org/pipermail/linux-amlogic/2017-December/005656.html
http://lists.infradead.org/pipermail/linux-amlogic/2017-December/005657.html
http://lists.infradead.org/pipermail/linux-amlogic/2017-December/005658.html
http://lists.infradead.org/pipermail/linux-amlogic/2017-December/005659.html
[4]
http://lists.infradead.org/pipermail/linux-amlogic/2017-November/005522.html
http://lists.infradead.org/pipermail/linux-amlogic/2017-November/005525.html
http://lists.infradead.org/pipermail/linux-amlogic/2017-November/005526.html
[3]
http://lists.infradead.org/pipermail/linux-amlogic/2017-November/005487.html
http://lists.infradead.org/pipermail/linux-amlogic/2017-November/005488.html
http://lists.infradead.org/pipermail/linux-amlogic/2017-November/005489.html
http://lists.infradead.org/pipermail/linux-amlogic/2017-November/005490.html
[2]
http://lists.infradead.org/pipermail/linux-amlogic/2017-November/005468.html
http://lists.infradead.org/pipermail/linux-amlogic/2017-November/005469.html
http://lists.infradead.org/pipermail/linux-amlogic/2017-November/005470.html
[1]
http://lists.infradead.org/pipermail/linux-amlogic/2017-November/005239.html
http://lists.infradead.org/pipermail/linux-amlogic/2017-November/005240.html
http://lists.infradead.org/pipermail/linux-amlogic/2017-November/005241.html
Qiufang Dai (3):
clk: meson-axg: add clocks dt-bindings required header
clk: meson-axg: add clock controller drivers
arm64: dts: meson-axg: add clock DT info for Meson AXG SoC
Yixun Lan (3):
dt-bindings: clock: add compatible variant for the Meson-AXG
clk: meson: make the spinlock naming more specific
arm64: dts: meson-axg: switch uart_ao clock to CLK81
.../bindings/clock/amlogic,gxbb-clkc.txt | 7 +-
arch/arm64/Kconfig.platforms | 1 +
arch/arm64/boot/dts/amlogic/meson-axg-s400.dts | 2 +
arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 19 +-
drivers/clk/meson/Kconfig | 8 +
drivers/clk/meson/Makefile | 1 +
drivers/clk/meson/axg.c | 944 +++++++++++++++++++++
drivers/clk/meson/axg.h | 126 +++
drivers/clk/meson/clkc.h | 2 +-
drivers/clk/meson/gxbb.c | 112 +--
drivers/clk/meson/meson8b.c | 24 +-
include/dt-bindings/clock/axg-clkc.h | 71 ++
12 files changed, 1242 insertions(+), 75 deletions(-)
create mode 100644 drivers/clk/meson/axg.c
create mode 100644 drivers/clk/meson/axg.h
create mode 100644 include/dt-bindings/clock/axg-clkc.h
--
2.15.1
^ permalink raw reply
* [PATCH] arch/arm64: elfcorehdr should be the first allocation
From: Prabhakar Kushwaha @ 2017-12-11 5:33 UTC (permalink / raw)
To: linux-arm-kernel
From: Abhimanyu Saini <abhimanyu.saini@nxp.com>
elfcorehdr_addr is assigned by kexec-utils and device tree of
dump kernel is fixed in chosen node with parameter "linux,elfcorehdr".
So, memory should be first reserved for elfcorehdr,
otherwise overlaps may happen with other memory allocations
which were done before the allocation of elcorehdr in the crash kernel
Signed-off-by: Guanhua <guanhua.gao@nxp.com>
Signed-off-by: Poonam Aggrwal <poonam.aggrwal@nxp.com>
Signed-off-by: Abhimanyu Saini <abhimanyu.saini@nxp.com>
---
arch/arm64/mm/init.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/mm/init.c b/arch/arm64/mm/init.c
index 5960bef0170d..551048cfcfff 100644
--- a/arch/arm64/mm/init.c
+++ b/arch/arm64/mm/init.c
@@ -453,6 +453,10 @@ void __init arm64_memblock_init(void)
* Register the kernel text, kernel data, initrd, and initial
* pagetables with memblock.
*/
+
+ /* make this the first reservation so that there are no chances of
+ * overlap */
+ reserve_elfcorehdr();
memblock_reserve(__pa_symbol(_text), _end - _text);
#ifdef CONFIG_BLK_DEV_INITRD
if (initrd_start) {
@@ -474,8 +478,6 @@ void __init arm64_memblock_init(void)
reserve_crashkernel();
- reserve_elfcorehdr();
-
dma_contiguous_reserve(arm64_dma_phys_limit);
memblock_allow_resize();
--
2.14.1
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox