* [PATCH v8 4/6] MAINTAINERS: add entry for DCP-based trusted keys
From: David Gstir @ 2024-04-03 7:21 UTC (permalink / raw)
To: Mimi Zohar, James Bottomley, Jarkko Sakkinen, Herbert Xu,
David S. Miller
Cc: David Gstir, Shawn Guo, Jonathan Corbet, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team,
Ahmad Fatoum, sigma star Kernel Team, David Howells, Li Yang,
Paul Moore, James Morris, Serge E. Hallyn, Paul E. McKenney,
Randy Dunlap, Catalin Marinas, Rafael J. Wysocki, Tejun Heo,
Steven Rostedt (Google), linux-doc, linux-kernel, linux-integrity,
keyrings, linux-crypto, linux-arm-kernel, linuxppc-dev,
linux-security-module
In-Reply-To: <20240403072131.54935-1-david@sigma-star.at>
This covers trusted keys backed by NXP's DCP (Data Co-Processor) chip
found in smaller i.MX SoCs.
Signed-off-by: David Gstir <david@sigma-star.at>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
---
MAINTAINERS | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index 976a5cea1577..ca7f42ca9338 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -12019,6 +12019,15 @@ S: Maintained
F: include/keys/trusted_caam.h
F: security/keys/trusted-keys/trusted_caam.c
+KEYS-TRUSTED-DCP
+M: David Gstir <david@sigma-star.at>
+R: sigma star Kernel Team <upstream+dcp@sigma-star.at>
+L: linux-integrity@vger.kernel.org
+L: keyrings@vger.kernel.org
+S: Supported
+F: include/keys/trusted_dcp.h
+F: security/keys/trusted-keys/trusted_dcp.c
+
KEYS-TRUSTED-TEE
M: Sumit Garg <sumit.garg@linaro.org>
L: linux-integrity@vger.kernel.org
--
2.35.3
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related
* [PATCH v8 6/6] docs: trusted-encrypted: add DCP as new trust source
From: David Gstir @ 2024-04-03 7:21 UTC (permalink / raw)
To: Mimi Zohar, James Bottomley, Jarkko Sakkinen, Herbert Xu,
David S. Miller
Cc: David Gstir, Shawn Guo, Jonathan Corbet, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team,
Ahmad Fatoum, sigma star Kernel Team, David Howells, Li Yang,
Paul Moore, James Morris, Serge E. Hallyn, Paul E. McKenney,
Randy Dunlap, Catalin Marinas, Rafael J. Wysocki, Tejun Heo,
Steven Rostedt (Google), linux-doc, linux-kernel, linux-integrity,
keyrings, linux-crypto, linux-arm-kernel, linuxppc-dev,
linux-security-module, Richard Weinberger, David Oberhollenzer
In-Reply-To: <20240403072131.54935-1-david@sigma-star.at>
Update the documentation for trusted and encrypted KEYS with DCP as new
trust source:
- Describe security properties of DCP trust source
- Describe key usage
- Document blob format
Co-developed-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Richard Weinberger <richard@nod.at>
Co-developed-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
Signed-off-by: David Gstir <david@sigma-star.at>
---
.../security/keys/trusted-encrypted.rst | 53 +++++++++++++++++++
security/keys/trusted-keys/trusted_dcp.c | 19 +++++++
2 files changed, 72 insertions(+)
diff --git a/Documentation/security/keys/trusted-encrypted.rst b/Documentation/security/keys/trusted-encrypted.rst
index e989b9802f92..f4d7e162d5e4 100644
--- a/Documentation/security/keys/trusted-encrypted.rst
+++ b/Documentation/security/keys/trusted-encrypted.rst
@@ -42,6 +42,14 @@ safe.
randomly generated and fused into each SoC at manufacturing time.
Otherwise, a common fixed test key is used instead.
+ (4) DCP (Data Co-Processor: crypto accelerator of various i.MX SoCs)
+
+ Rooted to a one-time programmable key (OTP) that is generally burnt
+ in the on-chip fuses and is accessible to the DCP encryption engine only.
+ DCP provides two keys that can be used as root of trust: the OTP key
+ and the UNIQUE key. Default is to use the UNIQUE key, but selecting
+ the OTP key can be done via a module parameter (dcp_use_otp_key).
+
* Execution isolation
(1) TPM
@@ -57,6 +65,12 @@ safe.
Fixed set of operations running in isolated execution environment.
+ (4) DCP
+
+ Fixed set of cryptographic operations running in isolated execution
+ environment. Only basic blob key encryption is executed there.
+ The actual key sealing/unsealing is done on main processor/kernel space.
+
* Optional binding to platform integrity state
(1) TPM
@@ -79,6 +93,11 @@ safe.
Relies on the High Assurance Boot (HAB) mechanism of NXP SoCs
for platform integrity.
+ (4) DCP
+
+ Relies on Secure/Trusted boot process (called HAB by vendor) for
+ platform integrity.
+
* Interfaces and APIs
(1) TPM
@@ -94,6 +113,11 @@ safe.
Interface is specific to silicon vendor.
+ (4) DCP
+
+ Vendor-specific API that is implemented as part of the DCP crypto driver in
+ ``drivers/crypto/mxs-dcp.c``.
+
* Threat model
The strength and appropriateness of a particular trust source for a given
@@ -129,6 +153,13 @@ selected trust source:
CAAM HWRNG, enable CRYPTO_DEV_FSL_CAAM_RNG_API and ensure the device
is probed.
+ * DCP (Data Co-Processor: crypto accelerator of various i.MX SoCs)
+
+ The DCP hardware device itself does not provide a dedicated RNG interface,
+ so the kernel default RNG is used. SoCs with DCP like the i.MX6ULL do have
+ a dedicated hardware RNG that is independent from DCP which can be enabled
+ to back the kernel RNG.
+
Users may override this by specifying ``trusted.rng=kernel`` on the kernel
command-line to override the used RNG with the kernel's random number pool.
@@ -231,6 +262,19 @@ Usage::
CAAM-specific format. The key length for new keys is always in bytes.
Trusted Keys can be 32 - 128 bytes (256 - 1024 bits).
+Trusted Keys usage: DCP
+-----------------------
+
+Usage::
+
+ keyctl add trusted name "new keylen" ring
+ keyctl add trusted name "load hex_blob" ring
+ keyctl print keyid
+
+"keyctl print" returns an ASCII hex copy of the sealed key, which is in format
+specific to this DCP key-blob implementation. The key length for new keys is
+always in bytes. Trusted Keys can be 32 - 128 bytes (256 - 1024 bits).
+
Encrypted Keys usage
--------------------
@@ -426,3 +470,12 @@ string length.
privkey is the binary representation of TPM2B_PUBLIC excluding the
initial TPM2B header which can be reconstructed from the ASN.1 octed
string length.
+
+DCP Blob Format
+---------------
+
+.. kernel-doc:: security/keys/trusted-keys/trusted_dcp.c
+ :doc: dcp blob format
+
+.. kernel-doc:: security/keys/trusted-keys/trusted_dcp.c
+ :identifiers: struct dcp_blob_fmt
diff --git a/security/keys/trusted-keys/trusted_dcp.c b/security/keys/trusted-keys/trusted_dcp.c
index 16c44aafeab3..b5f81a05be36 100644
--- a/security/keys/trusted-keys/trusted_dcp.c
+++ b/security/keys/trusted-keys/trusted_dcp.c
@@ -19,6 +19,25 @@
#define DCP_BLOB_VERSION 1
#define DCP_BLOB_AUTHLEN 16
+/**
+ * DOC: dcp blob format
+ *
+ * The Data Co-Processor (DCP) provides hardware-bound AES keys using its
+ * AES encryption engine only. It does not provide direct key sealing/unsealing.
+ * To make DCP hardware encryption keys usable as trust source, we define
+ * our own custom format that uses a hardware-bound key to secure the sealing
+ * key stored in the key blob.
+ *
+ * Whenever a new trusted key using DCP is generated, we generate a random 128-bit
+ * blob encryption key (BEK) and 128-bit nonce. The BEK and nonce are used to
+ * encrypt the trusted key payload using AES-128-GCM.
+ *
+ * The BEK itself is encrypted using the hardware-bound key using the DCP's AES
+ * encryption engine with AES-128-ECB. The encrypted BEK, generated nonce,
+ * BEK-encrypted payload and authentication tag make up the blob format together
+ * with a version number, payload length and authentication tag.
+ */
+
/**
* struct dcp_blob_fmt - DCP BLOB format.
*
--
2.35.3
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related
* Re: [PATCH v8 3/7] spmi: pmic-arb: Fix some compile warnings about members not being described
From: Neil Armstrong @ 2024-04-03 7:35 UTC (permalink / raw)
To: Abel Vesa, Stephen Boyd, Matthias Brugger, Bjorn Andersson,
Konrad Dybcio, Dmitry Baryshkov, AngeloGioacchino Del Regno,
Rob Herring, Krzysztof Kozlowski, Conor Dooley
Cc: Srini Kandagatla, Johan Hovold, linux-kernel, linux-arm-kernel,
linux-arm-msm, linux-mediatek, devicetree
In-Reply-To: <20240402-spmi-multi-master-support-v8-3-ce6f2d14a058@linaro.org>
On 02/04/2024 14:07, Abel Vesa wrote:
> Fix the following compile warnings:
>
> warning: Function parameter or struct member 'core' not described in 'spmi_pmic_arb'
> warning: Function parameter or struct member 'core_size' not described in 'spmi_pmic_arb'
> warning: Function parameter or struct member 'mapping_table_valid' not described in 'spmi_pmic_arb'
> warning: Function parameter or struct member 'pmic_arb' not described in 'pmic_arb_read_data'
> warning: Function parameter or struct member 'pmic_arb' not described in 'pmic_arb_write_data'
>
> Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
> ---
> drivers/spmi/spmi-pmic-arb.c | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/drivers/spmi/spmi-pmic-arb.c b/drivers/spmi/spmi-pmic-arb.c
> index 9ed1180fe31f..704fd4506971 100644
> --- a/drivers/spmi/spmi-pmic-arb.c
> +++ b/drivers/spmi/spmi-pmic-arb.c
> @@ -132,6 +132,8 @@ struct apid_data {
> * @wr_base: on v1 "core", on v2 "chnls" register base off DT.
> * @intr: address of the SPMI interrupt control registers.
> * @cnfg: address of the PMIC Arbiter configuration registers.
> + * @core: core register base for v2 and above only (see above)
> + * @core_size: core register base size
> * @lock: lock to synchronize accesses.
> * @channel: execution environment channel to use for accesses.
> * @irq: PMIC ARB interrupt.
> @@ -144,6 +146,7 @@ struct apid_data {
> * @apid_count: on v5 and v7: number of APIDs associated with the
> * particular SPMI bus instance
> * @mapping_table: in-memory copy of PPID -> APID mapping table.
> + * @mapping_table_valid:bitmap containing valid-only periphs
> * @domain: irq domain object for PMIC IRQ domain
> * @spmic: SPMI controller object
> * @ver_ops: version dependent operations.
> @@ -232,6 +235,7 @@ static inline void pmic_arb_set_rd_cmd(struct spmi_pmic_arb *pmic_arb,
>
> /**
> * pmic_arb_read_data: reads pmic-arb's register and copy 1..4 bytes to buf
> + * @pmic_arb: the SPMI PMIC arbiter
> * @bc: byte count -1. range: 0..3
> * @reg: register's address
> * @buf: output parameter, length must be bc + 1
> @@ -246,6 +250,7 @@ pmic_arb_read_data(struct spmi_pmic_arb *pmic_arb, u8 *buf, u32 reg, u8 bc)
>
> /**
> * pmic_arb_write_data: write 1..4 bytes from buf to pmic-arb's register
> + * @pmic_arb: the SPMI PMIC arbiter
> * @bc: byte-count -1. range: 0..3.
> * @reg: register's address.
> * @buf: buffer to write. length must be bc + 1.
>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply
* Re: [PATCH 5/5] arm64: dts: Add device tree source for the Au-Zone Maivin Starter Kit
From: Laurent Pinchart @ 2024-04-03 7:35 UTC (permalink / raw)
To: Francesco Dolcini
Cc: Shawn Guo, devicetree, imx, linux-arm-kernel, Trevor Zaharichuk,
Greg Lytle, Shawn Guo, Sascha Hauer, Pengutronix Kernel Team,
Fabio Estevam, Rob Herring, Krzysztof Kozlowski, Conor Dooley
In-Reply-To: <20240403070651.GB5070@francesco-nb>
On Wed, Apr 03, 2024 at 09:06:51AM +0200, Francesco Dolcini wrote:
> Hello Laurent,
>
> On Wed, Apr 03, 2024 at 08:30:11AM +0800, Shawn Guo wrote:
> > On Mon, Mar 25, 2024 at 10:32:45PM +0200, Laurent Pinchart wrote:
> > > diff --git a/arch/arm64/boot/dts/freescale/imx8mp-maivin.dts b/arch/arm64/boot/dts/freescale/imx8mp-maivin.dts
> > > new file mode 100644
> > > index 000000000000..2d1c8e782465
> > > --- /dev/null
> > > +++ b/arch/arm64/boot/dts/freescale/imx8mp-maivin.dts
> > > @@ -0,0 +1,236 @@
>
> [...]
>
> > > +/* Verdin I2C_2_DSI */
> > > +&i2c2 {
> > > + status = "okay";
> > > +
> > > + clock-frequency = <400000>;
> > > + scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
> > > + sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
> >
> > We usually end property list with 'status'.
>
> This is now a written and explicit guideline, no longer tribal knowledge,
> see https://docs.kernel.org/devicetree/bindings/dts-coding-style.html#order-of-properties-in-device-node
Thanks.
Any chance to teach checkpatch.pl (and/or the DT checker) about that ? :-)
--
Regards,
Laurent Pinchart
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply
* Re: [PATCH] arm64: dts: ti: k3-j722s: Disable ethernet ports by default
From: Michael Walle @ 2024-04-03 7:35 UTC (permalink / raw)
To: Francesco Dolcini
Cc: Nishanth Menon, Vignesh Raghavendra, Tero Kristo, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, linux-arm-kernel, devicetree,
linux-kernel
In-Reply-To: <20240402165824.GA32125@francesco-nb>
[-- Attachment #1.1: Type: text/plain, Size: 1881 bytes --]
Hi Francesco,
On Tue Apr 2, 2024 at 6:58 PM CEST, Francesco Dolcini wrote:
> On Tue, Apr 02, 2024 at 05:18:02PM +0200, Michael Walle wrote:
> > Device tree best practice is to disable any external interface in the
> > dtsi and just enable them if needed in the device tree. Thus, disable
> > both ethernet ports by default and just enable the one used by the EVM
> > in its device tree.
> >
> > There is no functional change.
> >
> > Signed-off-by: Michael Walle <mwalle@kernel.org>
> > ---
> > This should also be true for all the other SoCs. But I don't wanted to
> > touch all the (older) device trees. j722s is pretty new, so there we
> > should get it right.
> > ---
> > arch/arm64/boot/dts/ti/k3-j722s-evm.dts | 5 +----
> > arch/arm64/boot/dts/ti/k3-j722s.dtsi | 8 ++++++++
> > 2 files changed, 9 insertions(+), 4 deletions(-)
> >
> > diff --git a/arch/arm64/boot/dts/ti/k3-j722s-evm.dts b/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
> > index d045dc7dde0c..afe7f68e6a4b 100644
> > --- a/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
> > +++ b/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
> > @@ -224,14 +224,11 @@ cpsw3g_phy0: ethernet-phy@0 {
> > };
> >
> > &cpsw_port1 {
> > + status = "okay";
>
> status should be the last property, according to the dts coding guidelines.
Thanks for pointing that out. There is
devicetree/bindings/dts-coding-style.rst, which is in fact new to
me. Up until now, I was under the impression that how this is
handled is up to the maintainer of the SoC. I know that for the NXP
Layerscape for example, the maintainer will have an eye esp. for
that. But here it seems kinda random/all over the place. That being
said, I tried to be consistent with the other cpsw* nodes.
Anyway, I'll change it to come last.
> > phy-mode = "rgmii-rxid";
> > phy-handle = <&cpsw3g_phy0>;
> > };
-michael
[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 297 bytes --]
[-- Attachment #2: Type: text/plain, Size: 176 bytes --]
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply
* Re: [PATCH v8 6/7] spmi: pmic-arb: Register controller for bus instead of arbiter
From: Neil Armstrong @ 2024-04-03 7:37 UTC (permalink / raw)
To: Abel Vesa, Stephen Boyd, Matthias Brugger, Bjorn Andersson,
Konrad Dybcio, Dmitry Baryshkov, AngeloGioacchino Del Regno,
Rob Herring, Krzysztof Kozlowski, Conor Dooley
Cc: Srini Kandagatla, Johan Hovold, linux-kernel, linux-arm-kernel,
linux-arm-msm, linux-mediatek, devicetree
In-Reply-To: <20240402-spmi-multi-master-support-v8-6-ce6f2d14a058@linaro.org>
On 02/04/2024 14:07, Abel Vesa wrote:
> Introduce the bus object in order to decouple the resources
> that are bus specific from the arbiter. This way the SPMI controller
> is registered with the generic framework at a bus level rather than
> arbiter. This is needed in order to prepare for multi bus support.
>
> Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
> ---
> drivers/spmi/spmi-pmic-arb.c | 647 ++++++++++++++++++++++++-------------------
> 1 file changed, 369 insertions(+), 278 deletions(-)
>
> diff --git a/drivers/spmi/spmi-pmic-arb.c b/drivers/spmi/spmi-pmic-arb.c
> index ff777b4a6f33..3db622ed80de 100644
> --- a/drivers/spmi/spmi-pmic-arb.c
> +++ b/drivers/spmi/spmi-pmic-arb.c
> @@ -13,6 +13,7 @@
> #include <linux/kernel.h>
> #include <linux/module.h>
> #include <linux/of.h>
> +#include <linux/of_irq.h>
> #include <linux/platform_device.h>
> #include <linux/slab.h>
> #include <linux/spmi.h>
> @@ -125,61 +126,72 @@ struct apid_data {
> u8 irq_ee;
> };
>
> +struct spmi_pmic_arb;
> +
> /**
> - * struct spmi_pmic_arb - SPMI PMIC Arbiter object
> + * struct spmi_pmic_arb_bus - SPMI PMIC Arbiter Bus object
> *
> - * @rd_base: on v1 "core", on v2 "observer" register base off DT.
> - * @wr_base: on v1 "core", on v2 "chnls" register base off DT.
> + * @pmic_arb: the SPMI PMIC Arbiter the bus belongs to.
> + * @domain: irq domain object for PMIC IRQ domain
> * @intr: address of the SPMI interrupt control registers.
> * @cnfg: address of the PMIC Arbiter configuration registers.
> - * @core: core register base for v2 and above only (see above)
> - * @core_size: core register base size
> - * @lock: lock to synchronize accesses.
> - * @channel: execution environment channel to use for accesses.
> - * @irq: PMIC ARB interrupt.
> - * @ee: the current Execution Environment
> - * @bus_instance: on v7: 0 = primary SPMI bus, 1 = secondary SPMI bus
> - * @min_apid: minimum APID (used for bounding IRQ search)
> - * @max_apid: maximum APID
> + * @spmic: spmi controller registered for this bus
> * @base_apid: on v7: minimum APID associated with the particular SPMI
> * bus instance
> * @apid_count: on v5 and v7: number of APIDs associated with the
> * particular SPMI bus instance
> * @mapping_table: in-memory copy of PPID -> APID mapping table.
> * @mapping_table_valid:bitmap containing valid-only periphs
> - * @domain: irq domain object for PMIC IRQ domain
> - * @spmic: SPMI controller object
> - * @ver_ops: version dependent operations.
> * @ppid_to_apid: in-memory copy of PPID -> APID mapping table.
> * @last_apid: Highest value APID in use
> * @apid_data: Table of data for all APIDs
> + * @min_apid: minimum APID (used for bounding IRQ search)
> + * @max_apid: maximum APID
> + * @irq: PMIC ARB interrupt.
> + */
> +struct spmi_pmic_arb_bus {
> + struct spmi_pmic_arb *pmic_arb;
> + struct irq_domain *domain;
> + void __iomem *intr;
> + void __iomem *cnfg;
> + struct spmi_controller *spmic;
> + u16 base_apid;
> + int apid_count;
> + u32 *mapping_table;
> + DECLARE_BITMAP(mapping_table_valid, PMIC_ARB_MAX_PERIPHS);
> + u16 *ppid_to_apid;
> + u16 last_apid;
> + struct apid_data *apid_data;
> + u16 min_apid;
> + u16 max_apid;
> + int irq;
> +};
> +
> +/**
> + * struct spmi_pmic_arb - SPMI PMIC Arbiter object
> + *
> + * @rd_base: on v1 "core", on v2 "observer" register base off DT.
> + * @wr_base: on v1 "core", on v2 "chnls" register base off DT.
> + * @core: core register base for v2 and above only (see above)
> + * @core_size: core register base size
> + * @lock: lock to synchronize accesses.
> + * @channel: execution environment channel to use for accesses.
> + * @ee: the current Execution Environment
> + * @ver_ops: version dependent operations.
> * @max_periphs: Number of elements in apid_data[]
> + * @bus: per arbiter bus instance
> */
> struct spmi_pmic_arb {
> void __iomem *rd_base;
> void __iomem *wr_base;
> - void __iomem *intr;
> - void __iomem *cnfg;
> void __iomem *core;
> resource_size_t core_size;
> raw_spinlock_t lock;
> u8 channel;
> - int irq;
> u8 ee;
> - u32 bus_instance;
> - u16 min_apid;
> - u16 max_apid;
> - u16 base_apid;
> - int apid_count;
> - u32 *mapping_table;
> - DECLARE_BITMAP(mapping_table_valid, PMIC_ARB_MAX_PERIPHS);
> - struct irq_domain *domain;
> - struct spmi_controller *spmic;
> const struct pmic_arb_ver_ops *ver_ops;
> - u16 *ppid_to_apid;
> - u16 last_apid;
> - struct apid_data *apid_data;
> int max_periphs;
> + struct spmi_pmic_arb_bus *bus;
> };
>
> /**
> @@ -208,21 +220,21 @@ struct spmi_pmic_arb {
> struct pmic_arb_ver_ops {
> const char *ver_str;
> int (*get_core_resources)(struct platform_device *pdev, void __iomem *core);
> - int (*init_apid)(struct spmi_pmic_arb *pmic_arb);
> - int (*ppid_to_apid)(struct spmi_pmic_arb *pmic_arb, u16 ppid);
> + int (*init_apid)(struct spmi_pmic_arb_bus *bus);
> + int (*ppid_to_apid)(struct spmi_pmic_arb_bus *bus, u16 ppid);
> /* spmi commands (read_cmd, write_cmd, cmd) functionality */
> - int (*offset)(struct spmi_pmic_arb *pmic_arb, u8 sid, u16 addr,
> - enum pmic_arb_channel ch_type);
> + int (*offset)(struct spmi_pmic_arb_bus *bus, u8 sid, u16 addr,
> + enum pmic_arb_channel ch_type);
> u32 (*fmt_cmd)(u8 opc, u8 sid, u16 addr, u8 bc);
> int (*non_data_cmd)(struct spmi_controller *ctrl, u8 opc, u8 sid);
> /* Interrupts controller functionality (offset of PIC registers) */
> - void __iomem *(*owner_acc_status)(struct spmi_pmic_arb *pmic_arb, u8 m,
> + void __iomem *(*owner_acc_status)(struct spmi_pmic_arb_bus *bus, u8 m,
> u16 n);
> - void __iomem *(*acc_enable)(struct spmi_pmic_arb *pmic_arb, u16 n);
> - void __iomem *(*irq_status)(struct spmi_pmic_arb *pmic_arb, u16 n);
> - void __iomem *(*irq_clear)(struct spmi_pmic_arb *pmic_arb, u16 n);
> + void __iomem *(*acc_enable)(struct spmi_pmic_arb_bus *bus, u16 n);
> + void __iomem *(*irq_status)(struct spmi_pmic_arb_bus *bus, u16 n);
> + void __iomem *(*irq_clear)(struct spmi_pmic_arb_bus *bus, u16 n);
> u32 (*apid_map_offset)(u16 n);
> - void __iomem *(*apid_owner)(struct spmi_pmic_arb *pmic_arb, u16 n);
> + void __iomem *(*apid_owner)(struct spmi_pmic_arb_bus *bus, u16 n);
> };
>
> static inline void pmic_arb_base_write(struct spmi_pmic_arb *pmic_arb,
> @@ -272,13 +284,14 @@ static int pmic_arb_wait_for_done(struct spmi_controller *ctrl,
> void __iomem *base, u8 sid, u16 addr,
> enum pmic_arb_channel ch_type)
> {
> - struct spmi_pmic_arb *pmic_arb = spmi_controller_get_drvdata(ctrl);
> + struct spmi_pmic_arb_bus *bus = spmi_controller_get_drvdata(ctrl);
> + struct spmi_pmic_arb *pmic_arb = bus->pmic_arb;
> u32 status = 0;
> u32 timeout = PMIC_ARB_TIMEOUT_US;
> u32 offset;
> int rc;
>
> - rc = pmic_arb->ver_ops->offset(pmic_arb, sid, addr, ch_type);
> + rc = pmic_arb->ver_ops->offset(bus, sid, addr, ch_type);
> if (rc < 0)
> return rc;
>
> @@ -321,13 +334,14 @@ static int pmic_arb_wait_for_done(struct spmi_controller *ctrl,
> static int
> pmic_arb_non_data_cmd_v1(struct spmi_controller *ctrl, u8 opc, u8 sid)
> {
> - struct spmi_pmic_arb *pmic_arb = spmi_controller_get_drvdata(ctrl);
> + struct spmi_pmic_arb_bus *bus = spmi_controller_get_drvdata(ctrl);
> + struct spmi_pmic_arb *pmic_arb = bus->pmic_arb;
> unsigned long flags;
> u32 cmd;
> int rc;
> u32 offset;
>
> - rc = pmic_arb->ver_ops->offset(pmic_arb, sid, 0, PMIC_ARB_CHANNEL_RW);
> + rc = pmic_arb->ver_ops->offset(bus, sid, 0, PMIC_ARB_CHANNEL_RW);
> if (rc < 0)
> return rc;
>
> @@ -363,20 +377,21 @@ static int pmic_arb_cmd(struct spmi_controller *ctrl, u8 opc, u8 sid)
> return pmic_arb->ver_ops->non_data_cmd(ctrl, opc, sid);
> }
>
> -static int pmic_arb_fmt_read_cmd(struct spmi_pmic_arb *pmic_arb, u8 opc, u8 sid,
> +static int pmic_arb_fmt_read_cmd(struct spmi_pmic_arb_bus *bus, u8 opc, u8 sid,
> u16 addr, size_t len, u32 *cmd, u32 *offset)
> {
> + struct spmi_pmic_arb *pmic_arb = bus->pmic_arb;
> u8 bc = len - 1;
> int rc;
>
> - rc = pmic_arb->ver_ops->offset(pmic_arb, sid, addr,
> + rc = pmic_arb->ver_ops->offset(bus, sid, addr,
> PMIC_ARB_CHANNEL_OBS);
> if (rc < 0)
> return rc;
>
> *offset = rc;
> if (bc >= PMIC_ARB_MAX_TRANS_BYTES) {
> - dev_err(&pmic_arb->spmic->dev, "pmic-arb supports 1..%d bytes per trans, but:%zu requested",
> + dev_err(&bus->spmic->dev, "pmic-arb supports 1..%d bytes per trans, but:%zu requested",
> PMIC_ARB_MAX_TRANS_BYTES, len);
> return -EINVAL;
> }
> @@ -400,7 +415,8 @@ static int pmic_arb_read_cmd_unlocked(struct spmi_controller *ctrl, u32 cmd,
> u32 offset, u8 sid, u16 addr, u8 *buf,
> size_t len)
> {
> - struct spmi_pmic_arb *pmic_arb = spmi_controller_get_drvdata(ctrl);
> + struct spmi_pmic_arb_bus *bus = spmi_controller_get_drvdata(ctrl);
> + struct spmi_pmic_arb *pmic_arb = bus->pmic_arb;
> u8 bc = len - 1;
> int rc;
>
> @@ -422,12 +438,13 @@ static int pmic_arb_read_cmd_unlocked(struct spmi_controller *ctrl, u32 cmd,
> static int pmic_arb_read_cmd(struct spmi_controller *ctrl, u8 opc, u8 sid,
> u16 addr, u8 *buf, size_t len)
> {
> - struct spmi_pmic_arb *pmic_arb = spmi_controller_get_drvdata(ctrl);
> + struct spmi_pmic_arb_bus *bus = spmi_controller_get_drvdata(ctrl);
> + struct spmi_pmic_arb *pmic_arb = bus->pmic_arb;
> unsigned long flags;
> u32 cmd, offset;
> int rc;
>
> - rc = pmic_arb_fmt_read_cmd(pmic_arb, opc, sid, addr, len, &cmd,
> + rc = pmic_arb_fmt_read_cmd(bus, opc, sid, addr, len, &cmd,
> &offset);
> if (rc)
> return rc;
> @@ -439,21 +456,22 @@ static int pmic_arb_read_cmd(struct spmi_controller *ctrl, u8 opc, u8 sid,
> return rc;
> }
>
> -static int pmic_arb_fmt_write_cmd(struct spmi_pmic_arb *pmic_arb, u8 opc,
> +static int pmic_arb_fmt_write_cmd(struct spmi_pmic_arb_bus *bus, u8 opc,
> u8 sid, u16 addr, size_t len, u32 *cmd,
> u32 *offset)
> {
> + struct spmi_pmic_arb *pmic_arb = bus->pmic_arb;
> u8 bc = len - 1;
> int rc;
>
> - rc = pmic_arb->ver_ops->offset(pmic_arb, sid, addr,
> + rc = pmic_arb->ver_ops->offset(bus, sid, addr,
> PMIC_ARB_CHANNEL_RW);
> if (rc < 0)
> return rc;
>
> *offset = rc;
> if (bc >= PMIC_ARB_MAX_TRANS_BYTES) {
> - dev_err(&pmic_arb->spmic->dev, "pmic-arb supports 1..%d bytes per trans, but:%zu requested",
> + dev_err(&bus->spmic->dev, "pmic-arb supports 1..%d bytes per trans, but:%zu requested",
> PMIC_ARB_MAX_TRANS_BYTES, len);
> return -EINVAL;
> }
> @@ -479,7 +497,8 @@ static int pmic_arb_write_cmd_unlocked(struct spmi_controller *ctrl, u32 cmd,
> u32 offset, u8 sid, u16 addr,
> const u8 *buf, size_t len)
> {
> - struct spmi_pmic_arb *pmic_arb = spmi_controller_get_drvdata(ctrl);
> + struct spmi_pmic_arb_bus *bus = spmi_controller_get_drvdata(ctrl);
> + struct spmi_pmic_arb *pmic_arb = bus->pmic_arb;
> u8 bc = len - 1;
>
> /* Write data to FIFOs */
> @@ -498,12 +517,13 @@ static int pmic_arb_write_cmd_unlocked(struct spmi_controller *ctrl, u32 cmd,
> static int pmic_arb_write_cmd(struct spmi_controller *ctrl, u8 opc, u8 sid,
> u16 addr, const u8 *buf, size_t len)
> {
> - struct spmi_pmic_arb *pmic_arb = spmi_controller_get_drvdata(ctrl);
> + struct spmi_pmic_arb_bus *bus = spmi_controller_get_drvdata(ctrl);
> + struct spmi_pmic_arb *pmic_arb = bus->pmic_arb;
> unsigned long flags;
> u32 cmd, offset;
> int rc;
>
> - rc = pmic_arb_fmt_write_cmd(pmic_arb, opc, sid, addr, len, &cmd,
> + rc = pmic_arb_fmt_write_cmd(bus, opc, sid, addr, len, &cmd,
> &offset);
> if (rc)
> return rc;
> @@ -519,18 +539,19 @@ static int pmic_arb_write_cmd(struct spmi_controller *ctrl, u8 opc, u8 sid,
> static int pmic_arb_masked_write(struct spmi_controller *ctrl, u8 sid, u16 addr,
> const u8 *buf, const u8 *mask, size_t len)
> {
> - struct spmi_pmic_arb *pmic_arb = spmi_controller_get_drvdata(ctrl);
> + struct spmi_pmic_arb_bus *bus = spmi_controller_get_drvdata(ctrl);
> + struct spmi_pmic_arb *pmic_arb = bus->pmic_arb;
> u32 read_cmd, read_offset, write_cmd, write_offset;
> u8 temp[PMIC_ARB_MAX_TRANS_BYTES];
> unsigned long flags;
> int rc, i;
>
> - rc = pmic_arb_fmt_read_cmd(pmic_arb, SPMI_CMD_EXT_READL, sid, addr, len,
> + rc = pmic_arb_fmt_read_cmd(bus, SPMI_CMD_EXT_READL, sid, addr, len,
> &read_cmd, &read_offset);
> if (rc)
> return rc;
>
> - rc = pmic_arb_fmt_write_cmd(pmic_arb, SPMI_CMD_EXT_WRITEL, sid, addr,
> + rc = pmic_arb_fmt_write_cmd(bus, SPMI_CMD_EXT_WRITEL, sid, addr,
> len, &write_cmd, &write_offset);
> if (rc)
> return rc;
> @@ -573,25 +594,25 @@ struct spmi_pmic_arb_qpnpint_type {
> static void qpnpint_spmi_write(struct irq_data *d, u8 reg, void *buf,
> size_t len)
> {
> - struct spmi_pmic_arb *pmic_arb = irq_data_get_irq_chip_data(d);
> + struct spmi_pmic_arb_bus *bus = irq_data_get_irq_chip_data(d);
> u8 sid = hwirq_to_sid(d->hwirq);
> u8 per = hwirq_to_per(d->hwirq);
>
> - if (pmic_arb_write_cmd(pmic_arb->spmic, SPMI_CMD_EXT_WRITEL, sid,
> + if (pmic_arb_write_cmd(bus->spmic, SPMI_CMD_EXT_WRITEL, sid,
> (per << 8) + reg, buf, len))
> - dev_err_ratelimited(&pmic_arb->spmic->dev, "failed irqchip transaction on %x\n",
> + dev_err_ratelimited(&bus->spmic->dev, "failed irqchip transaction on %x\n",
> d->irq);
> }
>
> static void qpnpint_spmi_read(struct irq_data *d, u8 reg, void *buf, size_t len)
> {
> - struct spmi_pmic_arb *pmic_arb = irq_data_get_irq_chip_data(d);
> + struct spmi_pmic_arb_bus *bus = irq_data_get_irq_chip_data(d);
> u8 sid = hwirq_to_sid(d->hwirq);
> u8 per = hwirq_to_per(d->hwirq);
>
> - if (pmic_arb_read_cmd(pmic_arb->spmic, SPMI_CMD_EXT_READL, sid,
> + if (pmic_arb_read_cmd(bus->spmic, SPMI_CMD_EXT_READL, sid,
> (per << 8) + reg, buf, len))
> - dev_err_ratelimited(&pmic_arb->spmic->dev, "failed irqchip transaction on %x\n",
> + dev_err_ratelimited(&bus->spmic->dev, "failed irqchip transaction on %x\n",
> d->irq);
> }
>
> @@ -599,47 +620,49 @@ static int qpnpint_spmi_masked_write(struct irq_data *d, u8 reg,
> const void *buf, const void *mask,
> size_t len)
> {
> - struct spmi_pmic_arb *pmic_arb = irq_data_get_irq_chip_data(d);
> + struct spmi_pmic_arb_bus *bus = irq_data_get_irq_chip_data(d);
> u8 sid = hwirq_to_sid(d->hwirq);
> u8 per = hwirq_to_per(d->hwirq);
> int rc;
>
> - rc = pmic_arb_masked_write(pmic_arb->spmic, sid, (per << 8) + reg, buf,
> + rc = pmic_arb_masked_write(bus->spmic, sid, (per << 8) + reg, buf,
> mask, len);
> if (rc)
> - dev_err_ratelimited(&pmic_arb->spmic->dev, "failed irqchip transaction on %x rc=%d\n",
> + dev_err_ratelimited(&bus->spmic->dev, "failed irqchip transaction on %x rc=%d\n",
> d->irq, rc);
> return rc;
> }
>
> -static void cleanup_irq(struct spmi_pmic_arb *pmic_arb, u16 apid, int id)
> +static void cleanup_irq(struct spmi_pmic_arb_bus *bus, u16 apid, int id)
> {
> - u16 ppid = pmic_arb->apid_data[apid].ppid;
> + struct spmi_pmic_arb *pmic_arb = bus->pmic_arb;
> + u16 ppid = bus->apid_data[apid].ppid;
> u8 sid = ppid >> 8;
> u8 per = ppid & 0xFF;
> u8 irq_mask = BIT(id);
>
> - dev_err_ratelimited(&pmic_arb->spmic->dev, "%s apid=%d sid=0x%x per=0x%x irq=%d\n",
> - __func__, apid, sid, per, id);
> - writel_relaxed(irq_mask, pmic_arb->ver_ops->irq_clear(pmic_arb, apid));
> + dev_err_ratelimited(&bus->spmic->dev, "%s apid=%d sid=0x%x per=0x%x irq=%d\n",
> + __func__, apid, sid, per, id);
> + writel_relaxed(irq_mask, pmic_arb->ver_ops->irq_clear(bus, apid));
> }
>
> -static int periph_interrupt(struct spmi_pmic_arb *pmic_arb, u16 apid)
> +static int periph_interrupt(struct spmi_pmic_arb_bus *bus, u16 apid)
> {
> + struct spmi_pmic_arb *pmic_arb = bus->pmic_arb;
> unsigned int irq;
> u32 status, id;
> int handled = 0;
> - u8 sid = (pmic_arb->apid_data[apid].ppid >> 8) & 0xF;
> - u8 per = pmic_arb->apid_data[apid].ppid & 0xFF;
> + u8 sid = (bus->apid_data[apid].ppid >> 8) & 0xF;
> + u8 per = bus->apid_data[apid].ppid & 0xFF;
>
> - status = readl_relaxed(pmic_arb->ver_ops->irq_status(pmic_arb, apid));
> + status = readl_relaxed(pmic_arb->ver_ops->irq_status(bus, apid));
> while (status) {
> id = ffs(status) - 1;
> status &= ~BIT(id);
> - irq = irq_find_mapping(pmic_arb->domain,
> - spec_to_hwirq(sid, per, id, apid));
> + irq = irq_find_mapping(bus->domain,
> + spec_to_hwirq(sid, per, id, apid));
> if (irq == 0) {
> - cleanup_irq(pmic_arb, apid, id);
> + cleanup_irq(bus, apid, id);
> continue;
> }
> generic_handle_irq(irq);
> @@ -651,16 +674,17 @@ static int periph_interrupt(struct spmi_pmic_arb *pmic_arb, u16 apid)
>
> static void pmic_arb_chained_irq(struct irq_desc *desc)
> {
> - struct spmi_pmic_arb *pmic_arb = irq_desc_get_handler_data(desc);
> + struct spmi_pmic_arb_bus *bus = irq_desc_get_handler_data(desc);
> + struct spmi_pmic_arb *pmic_arb = bus->pmic_arb;
> const struct pmic_arb_ver_ops *ver_ops = pmic_arb->ver_ops;
> struct irq_chip *chip = irq_desc_get_chip(desc);
> - int first = pmic_arb->min_apid;
> - int last = pmic_arb->max_apid;
> + int first = bus->min_apid;
> + int last = bus->max_apid;
> /*
> * acc_offset will be non-zero for the secondary SPMI bus instance on
> * v7 controllers.
> */
> - int acc_offset = pmic_arb->base_apid >> 5;
> + int acc_offset = bus->base_apid >> 5;
> u8 ee = pmic_arb->ee;
> u32 status, enable, handled = 0;
> int i, id, apid;
> @@ -671,7 +695,7 @@ static void pmic_arb_chained_irq(struct irq_desc *desc)
> chained_irq_enter(chip, desc);
>
> for (i = first >> 5; i <= last >> 5; ++i) {
> - status = readl_relaxed(ver_ops->owner_acc_status(pmic_arb, ee, i - acc_offset));
> + status = readl_relaxed(ver_ops->owner_acc_status(bus, ee, i - acc_offset));
> if (status)
> acc_valid = true;
>
> @@ -685,9 +709,9 @@ static void pmic_arb_chained_irq(struct irq_desc *desc)
> continue;
> }
> enable = readl_relaxed(
> - ver_ops->acc_enable(pmic_arb, apid));
> + ver_ops->acc_enable(bus, apid));
> if (enable & SPMI_PIC_ACC_ENABLE_BIT)
> - if (periph_interrupt(pmic_arb, apid) != 0)
> + if (periph_interrupt(bus, apid) != 0)
> handled++;
> }
> }
> @@ -696,19 +720,19 @@ static void pmic_arb_chained_irq(struct irq_desc *desc)
> if (!acc_valid) {
> for (i = first; i <= last; i++) {
> /* skip if APPS is not irq owner */
> - if (pmic_arb->apid_data[i].irq_ee != pmic_arb->ee)
> + if (bus->apid_data[i].irq_ee != pmic_arb->ee)
> continue;
>
> irq_status = readl_relaxed(
> - ver_ops->irq_status(pmic_arb, i));
> + ver_ops->irq_status(bus, i));
> if (irq_status) {
> enable = readl_relaxed(
> - ver_ops->acc_enable(pmic_arb, i));
> + ver_ops->acc_enable(bus, i));
> if (enable & SPMI_PIC_ACC_ENABLE_BIT) {
> - dev_dbg(&pmic_arb->spmic->dev,
> + dev_dbg(&bus->spmic->dev,
> "Dispatching IRQ for apid=%d status=%x\n",
> i, irq_status);
> - if (periph_interrupt(pmic_arb, i) != 0)
> + if (periph_interrupt(bus, i) != 0)
> handled++;
> }
> }
> @@ -723,12 +747,13 @@ static void pmic_arb_chained_irq(struct irq_desc *desc)
>
> static void qpnpint_irq_ack(struct irq_data *d)
> {
> - struct spmi_pmic_arb *pmic_arb = irq_data_get_irq_chip_data(d);
> + struct spmi_pmic_arb_bus *bus = irq_data_get_irq_chip_data(d);
> + struct spmi_pmic_arb *pmic_arb = bus->pmic_arb;
> u8 irq = hwirq_to_irq(d->hwirq);
> u16 apid = hwirq_to_apid(d->hwirq);
> u8 data;
>
> - writel_relaxed(BIT(irq), pmic_arb->ver_ops->irq_clear(pmic_arb, apid));
> + writel_relaxed(BIT(irq), pmic_arb->ver_ops->irq_clear(bus, apid));
>
> data = BIT(irq);
> qpnpint_spmi_write(d, QPNPINT_REG_LATCHED_CLR, &data, 1);
> @@ -744,14 +769,15 @@ static void qpnpint_irq_mask(struct irq_data *d)
>
> static void qpnpint_irq_unmask(struct irq_data *d)
> {
> - struct spmi_pmic_arb *pmic_arb = irq_data_get_irq_chip_data(d);
> + struct spmi_pmic_arb_bus *bus = irq_data_get_irq_chip_data(d);
> + struct spmi_pmic_arb *pmic_arb = bus->pmic_arb;
> const struct pmic_arb_ver_ops *ver_ops = pmic_arb->ver_ops;
> u8 irq = hwirq_to_irq(d->hwirq);
> u16 apid = hwirq_to_apid(d->hwirq);
> u8 buf[2];
>
> writel_relaxed(SPMI_PIC_ACC_ENABLE_BIT,
> - ver_ops->acc_enable(pmic_arb, apid));
> + ver_ops->acc_enable(bus, apid));
>
> qpnpint_spmi_read(d, QPNPINT_REG_EN_SET, &buf[0], 1);
> if (!(buf[0] & BIT(irq))) {
> @@ -808,9 +834,9 @@ static int qpnpint_irq_set_type(struct irq_data *d, unsigned int flow_type)
>
> static int qpnpint_irq_set_wake(struct irq_data *d, unsigned int on)
> {
> - struct spmi_pmic_arb *pmic_arb = irq_data_get_irq_chip_data(d);
> + struct spmi_pmic_arb_bus *bus = irq_data_get_irq_chip_data(d);
>
> - return irq_set_irq_wake(pmic_arb->irq, on);
> + return irq_set_irq_wake(bus->irq, on);
> }
>
> static int qpnpint_get_irqchip_state(struct irq_data *d,
> @@ -832,17 +858,18 @@ static int qpnpint_get_irqchip_state(struct irq_data *d,
> static int qpnpint_irq_domain_activate(struct irq_domain *domain,
> struct irq_data *d, bool reserve)
> {
> - struct spmi_pmic_arb *pmic_arb = irq_data_get_irq_chip_data(d);
> + struct spmi_pmic_arb_bus *bus = irq_data_get_irq_chip_data(d);
> + struct spmi_pmic_arb *pmic_arb = bus->pmic_arb;
> u16 periph = hwirq_to_per(d->hwirq);
> u16 apid = hwirq_to_apid(d->hwirq);
> u16 sid = hwirq_to_sid(d->hwirq);
> u16 irq = hwirq_to_irq(d->hwirq);
> u8 buf;
>
> - if (pmic_arb->apid_data[apid].irq_ee != pmic_arb->ee) {
> - dev_err(&pmic_arb->spmic->dev, "failed to xlate sid = %#x, periph = %#x, irq = %u: ee=%u but owner=%u\n",
> + if (bus->apid_data[apid].irq_ee != pmic_arb->ee) {
> + dev_err(&bus->spmic->dev, "failed to xlate sid = %#x, periph = %#x, irq = %u: ee=%u but owner=%u\n",
> sid, periph, irq, pmic_arb->ee,
> - pmic_arb->apid_data[apid].irq_ee);
> + bus->apid_data[apid].irq_ee);
> return -ENODEV;
> }
>
> @@ -869,15 +896,16 @@ static int qpnpint_irq_domain_translate(struct irq_domain *d,
> unsigned long *out_hwirq,
> unsigned int *out_type)
> {
> - struct spmi_pmic_arb *pmic_arb = d->host_data;
> + struct spmi_pmic_arb_bus *bus = d->host_data;
> + struct spmi_pmic_arb *pmic_arb = bus->pmic_arb;
> u32 *intspec = fwspec->param;
> u16 apid, ppid;
> int rc;
>
> - dev_dbg(&pmic_arb->spmic->dev, "intspec[0] 0x%1x intspec[1] 0x%02x intspec[2] 0x%02x\n",
> + dev_dbg(&bus->spmic->dev, "intspec[0] 0x%1x intspec[1] 0x%02x intspec[2] 0x%02x\n",
> intspec[0], intspec[1], intspec[2]);
>
> - if (irq_domain_get_of_node(d) != pmic_arb->spmic->dev.of_node)
> + if (irq_domain_get_of_node(d) != bus->spmic->dev.of_node)
> return -EINVAL;
> if (fwspec->param_count != 4)
> return -EINVAL;
> @@ -885,37 +913,37 @@ static int qpnpint_irq_domain_translate(struct irq_domain *d,
> return -EINVAL;
>
> ppid = intspec[0] << 8 | intspec[1];
> - rc = pmic_arb->ver_ops->ppid_to_apid(pmic_arb, ppid);
> + rc = pmic_arb->ver_ops->ppid_to_apid(bus, ppid);
> if (rc < 0) {
> - dev_err(&pmic_arb->spmic->dev, "failed to xlate sid = %#x, periph = %#x, irq = %u rc = %d\n",
> - intspec[0], intspec[1], intspec[2], rc);
> + dev_err(&bus->spmic->dev, "failed to xlate sid = %#x, periph = %#x, irq = %u rc = %d\n",
> + intspec[0], intspec[1], intspec[2], rc);
> return rc;
> }
>
> apid = rc;
> /* Keep track of {max,min}_apid for bounding search during interrupt */
> - if (apid > pmic_arb->max_apid)
> - pmic_arb->max_apid = apid;
> - if (apid < pmic_arb->min_apid)
> - pmic_arb->min_apid = apid;
> + if (apid > bus->max_apid)
> + bus->max_apid = apid;
> + if (apid < bus->min_apid)
> + bus->min_apid = apid;
>
> *out_hwirq = spec_to_hwirq(intspec[0], intspec[1], intspec[2], apid);
> *out_type = intspec[3] & IRQ_TYPE_SENSE_MASK;
>
> - dev_dbg(&pmic_arb->spmic->dev, "out_hwirq = %lu\n", *out_hwirq);
> + dev_dbg(&bus->spmic->dev, "out_hwirq = %lu\n", *out_hwirq);
>
> return 0;
> }
>
> static struct lock_class_key qpnpint_irq_lock_class, qpnpint_irq_request_class;
>
> -static void qpnpint_irq_domain_map(struct spmi_pmic_arb *pmic_arb,
> +static void qpnpint_irq_domain_map(struct spmi_pmic_arb_bus *bus,
> struct irq_domain *domain, unsigned int virq,
> irq_hw_number_t hwirq, unsigned int type)
> {
> irq_flow_handler_t handler;
>
> - dev_dbg(&pmic_arb->spmic->dev, "virq = %u, hwirq = %lu, type = %u\n",
> + dev_dbg(&bus->spmic->dev, "virq = %u, hwirq = %lu, type = %u\n",
> virq, hwirq, type);
>
> if (type & IRQ_TYPE_EDGE_BOTH)
> @@ -926,7 +954,7 @@ static void qpnpint_irq_domain_map(struct spmi_pmic_arb *pmic_arb,
>
> irq_set_lockdep_class(virq, &qpnpint_irq_lock_class,
> &qpnpint_irq_request_class);
> - irq_domain_set_info(domain, virq, hwirq, &pmic_arb_irqchip, pmic_arb,
> + irq_domain_set_info(domain, virq, hwirq, &pmic_arb_irqchip, bus,
> handler, NULL, NULL);
> }
>
> @@ -934,7 +962,7 @@ static int qpnpint_irq_domain_alloc(struct irq_domain *domain,
> unsigned int virq, unsigned int nr_irqs,
> void *data)
> {
> - struct spmi_pmic_arb *pmic_arb = domain->host_data;
> + struct spmi_pmic_arb_bus *bus = domain->host_data;
> struct irq_fwspec *fwspec = data;
> irq_hw_number_t hwirq;
> unsigned int type;
> @@ -945,20 +973,22 @@ static int qpnpint_irq_domain_alloc(struct irq_domain *domain,
> return ret;
>
> for (i = 0; i < nr_irqs; i++)
> - qpnpint_irq_domain_map(pmic_arb, domain, virq + i, hwirq + i,
> + qpnpint_irq_domain_map(bus, domain, virq + i, hwirq + i,
> type);
>
> return 0;
> }
>
> -static int pmic_arb_init_apid_min_max(struct spmi_pmic_arb *pmic_arb)
> +static int pmic_arb_init_apid_min_max(struct spmi_pmic_arb_bus *bus)
> {
> + struct spmi_pmic_arb *pmic_arb = bus->pmic_arb;
> +
> /*
> * Initialize max_apid/min_apid to the opposite bounds, during
> * the irq domain translation, we are sure to update these
> */
> - pmic_arb->max_apid = 0;
> - pmic_arb->min_apid = pmic_arb->max_periphs - 1;
> + bus->max_apid = 0;
> + bus->min_apid = pmic_arb->max_periphs - 1;
>
> return 0;
> }
> @@ -976,37 +1006,38 @@ static int pmic_arb_get_core_resources_v1(struct platform_device *pdev,
> return 0;
> }
>
> -static int pmic_arb_init_apid_v1(struct spmi_pmic_arb *pmic_arb)
> +static int pmic_arb_init_apid_v1(struct spmi_pmic_arb_bus *bus)
> {
> + struct spmi_pmic_arb *pmic_arb = bus->pmic_arb;
> u32 *mapping_table;
>
> - mapping_table = devm_kcalloc(&pmic_arb->spmic->dev, pmic_arb->max_periphs,
> + mapping_table = devm_kcalloc(&bus->spmic->dev, pmic_arb->max_periphs,
> sizeof(*mapping_table), GFP_KERNEL);
> if (!mapping_table)
> return -ENOMEM;
>
> - pmic_arb->mapping_table = mapping_table;
> + bus->mapping_table = mapping_table;
>
> - return pmic_arb_init_apid_min_max(pmic_arb);
> + return pmic_arb_init_apid_min_max(bus);
> }
>
> -static int pmic_arb_ppid_to_apid_v1(struct spmi_pmic_arb *pmic_arb, u16 ppid)
> +static int pmic_arb_ppid_to_apid_v1(struct spmi_pmic_arb_bus *bus, u16 ppid)
> {
> - u32 *mapping_table = pmic_arb->mapping_table;
> + u32 *mapping_table = bus->mapping_table;
> int index = 0, i;
> u16 apid_valid;
> u16 apid;
> u32 data;
>
> - apid_valid = pmic_arb->ppid_to_apid[ppid];
> + apid_valid = bus->ppid_to_apid[ppid];
> if (apid_valid & PMIC_ARB_APID_VALID) {
> apid = apid_valid & ~PMIC_ARB_APID_VALID;
> return apid;
> }
>
> for (i = 0; i < SPMI_MAPPING_TABLE_TREE_DEPTH; ++i) {
> - if (!test_and_set_bit(index, pmic_arb->mapping_table_valid))
> - mapping_table[index] = readl_relaxed(pmic_arb->cnfg +
> + if (!test_and_set_bit(index, bus->mapping_table_valid))
> + mapping_table[index] = readl_relaxed(bus->cnfg +
> SPMI_MAPPING_TABLE_REG(index));
>
> data = mapping_table[index];
> @@ -1016,9 +1047,9 @@ static int pmic_arb_ppid_to_apid_v1(struct spmi_pmic_arb *pmic_arb, u16 ppid)
> index = SPMI_MAPPING_BIT_IS_1_RESULT(data);
> } else {
> apid = SPMI_MAPPING_BIT_IS_1_RESULT(data);
> - pmic_arb->ppid_to_apid[ppid]
> + bus->ppid_to_apid[ppid]
> = apid | PMIC_ARB_APID_VALID;
> - pmic_arb->apid_data[apid].ppid = ppid;
> + bus->apid_data[apid].ppid = ppid;
> return apid;
> }
> } else {
> @@ -1026,9 +1057,9 @@ static int pmic_arb_ppid_to_apid_v1(struct spmi_pmic_arb *pmic_arb, u16 ppid)
> index = SPMI_MAPPING_BIT_IS_0_RESULT(data);
> } else {
> apid = SPMI_MAPPING_BIT_IS_0_RESULT(data);
> - pmic_arb->ppid_to_apid[ppid]
> + bus->ppid_to_apid[ppid]
> = apid | PMIC_ARB_APID_VALID;
> - pmic_arb->apid_data[apid].ppid = ppid;
> + bus->apid_data[apid].ppid = ppid;
> return apid;
> }
> }
> @@ -1038,24 +1069,26 @@ static int pmic_arb_ppid_to_apid_v1(struct spmi_pmic_arb *pmic_arb, u16 ppid)
> }
>
> /* v1 offset per ee */
> -static int pmic_arb_offset_v1(struct spmi_pmic_arb *pmic_arb, u8 sid, u16 addr,
> - enum pmic_arb_channel ch_type)
> +static int pmic_arb_offset_v1(struct spmi_pmic_arb_bus *bus, u8 sid, u16 addr,
> + enum pmic_arb_channel ch_type)
> {
> + struct spmi_pmic_arb *pmic_arb = bus->pmic_arb;
> return 0x800 + 0x80 * pmic_arb->channel;
> }
>
> -static u16 pmic_arb_find_apid(struct spmi_pmic_arb *pmic_arb, u16 ppid)
> +static u16 pmic_arb_find_apid(struct spmi_pmic_arb_bus *bus, u16 ppid)
> {
> - struct apid_data *apidd = &pmic_arb->apid_data[pmic_arb->last_apid];
> + struct spmi_pmic_arb *pmic_arb = bus->pmic_arb;
> + struct apid_data *apidd = &bus->apid_data[bus->last_apid];
> u32 regval, offset;
> u16 id, apid;
>
> - for (apid = pmic_arb->last_apid; ; apid++, apidd++) {
> + for (apid = bus->last_apid; ; apid++, apidd++) {
> offset = pmic_arb->ver_ops->apid_map_offset(apid);
> if (offset >= pmic_arb->core_size)
> break;
>
> - regval = readl_relaxed(pmic_arb->ver_ops->apid_owner(pmic_arb,
> + regval = readl_relaxed(pmic_arb->ver_ops->apid_owner(bus,
> apid));
> apidd->irq_ee = SPMI_OWNERSHIP_PERIPH2OWNER(regval);
> apidd->write_ee = apidd->irq_ee;
> @@ -1065,14 +1098,14 @@ static u16 pmic_arb_find_apid(struct spmi_pmic_arb *pmic_arb, u16 ppid)
> continue;
>
> id = (regval >> 8) & PMIC_ARB_PPID_MASK;
> - pmic_arb->ppid_to_apid[id] = apid | PMIC_ARB_APID_VALID;
> + bus->ppid_to_apid[id] = apid | PMIC_ARB_APID_VALID;
> apidd->ppid = id;
> if (id == ppid) {
> apid |= PMIC_ARB_APID_VALID;
> break;
> }
> }
> - pmic_arb->last_apid = apid & ~PMIC_ARB_APID_VALID;
> + bus->last_apid = apid & ~PMIC_ARB_APID_VALID;
>
> return apid;
> }
> @@ -1104,21 +1137,22 @@ static int pmic_arb_get_core_resources_v2(struct platform_device *pdev,
> return pmic_arb_get_obsrvr_chnls_v2(pdev);
> }
>
> -static int pmic_arb_ppid_to_apid_v2(struct spmi_pmic_arb *pmic_arb, u16 ppid)
> +static int pmic_arb_ppid_to_apid_v2(struct spmi_pmic_arb_bus *bus, u16 ppid)
> {
> u16 apid_valid;
>
> - apid_valid = pmic_arb->ppid_to_apid[ppid];
> + apid_valid = bus->ppid_to_apid[ppid];
> if (!(apid_valid & PMIC_ARB_APID_VALID))
> - apid_valid = pmic_arb_find_apid(pmic_arb, ppid);
> + apid_valid = pmic_arb_find_apid(bus, ppid);
> if (!(apid_valid & PMIC_ARB_APID_VALID))
> return -ENODEV;
>
> return apid_valid & ~PMIC_ARB_APID_VALID;
> }
>
> -static int pmic_arb_read_apid_map_v5(struct spmi_pmic_arb *pmic_arb)
> +static int pmic_arb_read_apid_map_v5(struct spmi_pmic_arb_bus *bus)
> {
> + struct spmi_pmic_arb *pmic_arb = bus->pmic_arb;
> struct apid_data *apidd;
> struct apid_data *prev_apidd;
> u16 i, apid, ppid, apid_max;
> @@ -1140,9 +1174,9 @@ static int pmic_arb_read_apid_map_v5(struct spmi_pmic_arb *pmic_arb)
> * where N = number of APIDs supported by the primary bus and
> * M = number of APIDs supported by the secondary bus
> */
> - apidd = &pmic_arb->apid_data[pmic_arb->base_apid];
> - apid_max = pmic_arb->base_apid + pmic_arb->apid_count;
> - for (i = pmic_arb->base_apid; i < apid_max; i++, apidd++) {
> + apidd = &bus->apid_data[bus->base_apid];
> + apid_max = bus->base_apid + bus->apid_count;
> + for (i = bus->base_apid; i < apid_max; i++, apidd++) {
> offset = pmic_arb->ver_ops->apid_map_offset(i);
> if (offset >= pmic_arb->core_size)
> break;
> @@ -1153,19 +1187,18 @@ static int pmic_arb_read_apid_map_v5(struct spmi_pmic_arb *pmic_arb)
> ppid = (regval >> 8) & PMIC_ARB_PPID_MASK;
> is_irq_ee = PMIC_ARB_CHAN_IS_IRQ_OWNER(regval);
>
> - regval = readl_relaxed(pmic_arb->ver_ops->apid_owner(pmic_arb,
> - i));
> + regval = readl_relaxed(pmic_arb->ver_ops->apid_owner(bus, i));
> apidd->write_ee = SPMI_OWNERSHIP_PERIPH2OWNER(regval);
>
> apidd->irq_ee = is_irq_ee ? apidd->write_ee : INVALID_EE;
>
> - valid = pmic_arb->ppid_to_apid[ppid] & PMIC_ARB_APID_VALID;
> - apid = pmic_arb->ppid_to_apid[ppid] & ~PMIC_ARB_APID_VALID;
> - prev_apidd = &pmic_arb->apid_data[apid];
> + valid = bus->ppid_to_apid[ppid] & PMIC_ARB_APID_VALID;
> + apid = bus->ppid_to_apid[ppid] & ~PMIC_ARB_APID_VALID;
> + prev_apidd = &bus->apid_data[apid];
>
> if (!valid || apidd->write_ee == pmic_arb->ee) {
> /* First PPID mapping or one for this EE */
> - pmic_arb->ppid_to_apid[ppid] = i | PMIC_ARB_APID_VALID;
> + bus->ppid_to_apid[ppid] = i | PMIC_ARB_APID_VALID;
> } else if (valid && is_irq_ee &&
> prev_apidd->write_ee == pmic_arb->ee) {
> /*
> @@ -1176,42 +1209,43 @@ static int pmic_arb_read_apid_map_v5(struct spmi_pmic_arb *pmic_arb)
> }
>
> apidd->ppid = ppid;
> - pmic_arb->last_apid = i;
> + bus->last_apid = i;
> }
>
> /* Dump the mapping table for debug purposes. */
> - dev_dbg(&pmic_arb->spmic->dev, "PPID APID Write-EE IRQ-EE\n");
> + dev_dbg(&bus->spmic->dev, "PPID APID Write-EE IRQ-EE\n");
> for (ppid = 0; ppid < PMIC_ARB_MAX_PPID; ppid++) {
> - apid = pmic_arb->ppid_to_apid[ppid];
> + apid = bus->ppid_to_apid[ppid];
> if (apid & PMIC_ARB_APID_VALID) {
> apid &= ~PMIC_ARB_APID_VALID;
> - apidd = &pmic_arb->apid_data[apid];
> - dev_dbg(&pmic_arb->spmic->dev, "%#03X %3u %2u %2u\n",
> - ppid, apid, apidd->write_ee, apidd->irq_ee);
> + apidd = &bus->apid_data[apid];
> + dev_dbg(&bus->spmic->dev, "%#03X %3u %2u %2u\n",
> + ppid, apid, apidd->write_ee, apidd->irq_ee);
> }
> }
>
> return 0;
> }
>
> -static int pmic_arb_ppid_to_apid_v5(struct spmi_pmic_arb *pmic_arb, u16 ppid)
> +static int pmic_arb_ppid_to_apid_v5(struct spmi_pmic_arb_bus *bus, u16 ppid)
> {
> - if (!(pmic_arb->ppid_to_apid[ppid] & PMIC_ARB_APID_VALID))
> + if (!(bus->ppid_to_apid[ppid] & PMIC_ARB_APID_VALID))
> return -ENODEV;
>
> - return pmic_arb->ppid_to_apid[ppid] & ~PMIC_ARB_APID_VALID;
> + return bus->ppid_to_apid[ppid] & ~PMIC_ARB_APID_VALID;
> }
>
> /* v2 offset per ppid and per ee */
> -static int pmic_arb_offset_v2(struct spmi_pmic_arb *pmic_arb, u8 sid, u16 addr,
> - enum pmic_arb_channel ch_type)
> +static int pmic_arb_offset_v2(struct spmi_pmic_arb_bus *bus, u8 sid, u16 addr,
> + enum pmic_arb_channel ch_type)
> {
> + struct spmi_pmic_arb *pmic_arb = bus->pmic_arb;
> u16 apid;
> u16 ppid;
> int rc;
>
> ppid = sid << 8 | ((addr >> 8) & 0xFF);
> - rc = pmic_arb_ppid_to_apid_v2(pmic_arb, ppid);
> + rc = pmic_arb_ppid_to_apid_v2(bus, ppid);
> if (rc < 0)
> return rc;
>
> @@ -1219,27 +1253,28 @@ static int pmic_arb_offset_v2(struct spmi_pmic_arb *pmic_arb, u8 sid, u16 addr,
> return 0x1000 * pmic_arb->ee + 0x8000 * apid;
> }
>
> -static int pmic_arb_init_apid_v5(struct spmi_pmic_arb *pmic_arb)
> +static int pmic_arb_init_apid_v5(struct spmi_pmic_arb_bus *bus)
> {
> + struct spmi_pmic_arb *pmic_arb = bus->pmic_arb;
> int ret;
>
> - pmic_arb->base_apid = 0;
> - pmic_arb->apid_count = readl_relaxed(pmic_arb->core + PMIC_ARB_FEATURES) &
> - PMIC_ARB_FEATURES_PERIPH_MASK;
> + bus->base_apid = 0;
> + bus->apid_count = readl_relaxed(pmic_arb->core + PMIC_ARB_FEATURES) &
> + PMIC_ARB_FEATURES_PERIPH_MASK;
>
> - if (pmic_arb->base_apid + pmic_arb->apid_count > pmic_arb->max_periphs) {
> - dev_err(&pmic_arb->spmic->dev, "Unsupported APID count %d detected\n",
> - pmic_arb->base_apid + pmic_arb->apid_count);
> + if (bus->base_apid + bus->apid_count > pmic_arb->max_periphs) {
> + dev_err(&bus->spmic->dev, "Unsupported APID count %d detected\n",
> + bus->base_apid + bus->apid_count);
> return -EINVAL;
> }
>
> - ret = pmic_arb_init_apid_min_max(pmic_arb);
> + ret = pmic_arb_init_apid_min_max(bus);
> if (ret)
> return ret;
>
> - ret = pmic_arb_read_apid_map_v5(pmic_arb);
> + ret = pmic_arb_read_apid_map_v5(bus);
> if (ret) {
> - dev_err(&pmic_arb->spmic->dev, "could not read APID->PPID mapping table, rc= %d\n",
> + dev_err(&bus->spmic->dev, "could not read APID->PPID mapping table, rc= %d\n",
> ret);
> return ret;
> }
> @@ -1251,15 +1286,16 @@ static int pmic_arb_init_apid_v5(struct spmi_pmic_arb *pmic_arb)
> * v5 offset per ee and per apid for observer channels and per apid for
> * read/write channels.
> */
> -static int pmic_arb_offset_v5(struct spmi_pmic_arb *pmic_arb, u8 sid, u16 addr,
> - enum pmic_arb_channel ch_type)
> +static int pmic_arb_offset_v5(struct spmi_pmic_arb_bus *bus, u8 sid, u16 addr,
> + enum pmic_arb_channel ch_type)
> {
> + struct spmi_pmic_arb *pmic_arb = bus->pmic_arb;
> u16 apid;
> int rc;
> u32 offset = 0;
> u16 ppid = (sid << 8) | (addr >> 8);
>
> - rc = pmic_arb_ppid_to_apid_v5(pmic_arb, ppid);
> + rc = pmic_arb_ppid_to_apid_v5(bus, ppid);
> if (rc < 0)
> return rc;
>
> @@ -1269,8 +1305,8 @@ static int pmic_arb_offset_v5(struct spmi_pmic_arb *pmic_arb, u8 sid, u16 addr,
> offset = 0x10000 * pmic_arb->ee + 0x80 * apid;
> break;
> case PMIC_ARB_CHANNEL_RW:
> - if (pmic_arb->apid_data[apid].write_ee != pmic_arb->ee) {
> - dev_err(&pmic_arb->spmic->dev, "disallowed SPMI write to sid=%u, addr=0x%04X\n",
> + if (bus->apid_data[apid].write_ee != pmic_arb->ee) {
> + dev_err(&bus->spmic->dev, "disallowed SPMI write to sid=%u, addr=0x%04X\n",
> sid, addr);
> return -EPERM;
> }
> @@ -1297,15 +1333,16 @@ static int pmic_arb_get_core_resources_v7(struct platform_device *pdev,
> * v7 offset per ee and per apid for observer channels and per apid for
> * read/write channels.
> */
> -static int pmic_arb_offset_v7(struct spmi_pmic_arb *pmic_arb, u8 sid, u16 addr,
> - enum pmic_arb_channel ch_type)
> +static int pmic_arb_offset_v7(struct spmi_pmic_arb_bus *bus, u8 sid, u16 addr,
> + enum pmic_arb_channel ch_type)
> {
> + struct spmi_pmic_arb *pmic_arb = bus->pmic_arb;
> u16 apid;
> int rc;
> u32 offset = 0;
> u16 ppid = (sid << 8) | (addr >> 8);
>
> - rc = pmic_arb->ver_ops->ppid_to_apid(pmic_arb, ppid);
> + rc = pmic_arb->ver_ops->ppid_to_apid(bus, ppid);
> if (rc < 0)
> return rc;
>
> @@ -1315,8 +1352,8 @@ static int pmic_arb_offset_v7(struct spmi_pmic_arb *pmic_arb, u8 sid, u16 addr,
> offset = 0x8000 * pmic_arb->ee + 0x20 * apid;
> break;
> case PMIC_ARB_CHANNEL_RW:
> - if (pmic_arb->apid_data[apid].write_ee != pmic_arb->ee) {
> - dev_err(&pmic_arb->spmic->dev, "disallowed SPMI write to sid=%u, addr=0x%04X\n",
> + if (bus->apid_data[apid].write_ee != pmic_arb->ee) {
> + dev_err(&bus->spmic->dev, "disallowed SPMI write to sid=%u, addr=0x%04X\n",
> sid, addr);
> return -EPERM;
> }
> @@ -1338,104 +1375,110 @@ static u32 pmic_arb_fmt_cmd_v2(u8 opc, u8 sid, u16 addr, u8 bc)
> }
>
> static void __iomem *
> -pmic_arb_owner_acc_status_v1(struct spmi_pmic_arb *pmic_arb, u8 m, u16 n)
> +pmic_arb_owner_acc_status_v1(struct spmi_pmic_arb_bus *bus, u8 m, u16 n)
> {
> - return pmic_arb->intr + 0x20 * m + 0x4 * n;
> + return bus->intr + 0x20 * m + 0x4 * n;
> }
>
> static void __iomem *
> -pmic_arb_owner_acc_status_v2(struct spmi_pmic_arb *pmic_arb, u8 m, u16 n)
> +pmic_arb_owner_acc_status_v2(struct spmi_pmic_arb_bus *bus, u8 m, u16 n)
> {
> - return pmic_arb->intr + 0x100000 + 0x1000 * m + 0x4 * n;
> + return bus->intr + 0x100000 + 0x1000 * m + 0x4 * n;
> }
>
> static void __iomem *
> -pmic_arb_owner_acc_status_v3(struct spmi_pmic_arb *pmic_arb, u8 m, u16 n)
> +pmic_arb_owner_acc_status_v3(struct spmi_pmic_arb_bus *bus, u8 m, u16 n)
> {
> - return pmic_arb->intr + 0x200000 + 0x1000 * m + 0x4 * n;
> + return bus->intr + 0x200000 + 0x1000 * m + 0x4 * n;
> }
>
> static void __iomem *
> -pmic_arb_owner_acc_status_v5(struct spmi_pmic_arb *pmic_arb, u8 m, u16 n)
> +pmic_arb_owner_acc_status_v5(struct spmi_pmic_arb_bus *bus, u8 m, u16 n)
> {
> - return pmic_arb->intr + 0x10000 * m + 0x4 * n;
> + return bus->intr + 0x10000 * m + 0x4 * n;
> }
>
> static void __iomem *
> -pmic_arb_owner_acc_status_v7(struct spmi_pmic_arb *pmic_arb, u8 m, u16 n)
> +pmic_arb_owner_acc_status_v7(struct spmi_pmic_arb_bus *bus, u8 m, u16 n)
> {
> - return pmic_arb->intr + 0x1000 * m + 0x4 * n;
> + return bus->intr + 0x1000 * m + 0x4 * n;
> }
>
> static void __iomem *
> -pmic_arb_acc_enable_v1(struct spmi_pmic_arb *pmic_arb, u16 n)
> +pmic_arb_acc_enable_v1(struct spmi_pmic_arb_bus *bus, u16 n)
> {
> - return pmic_arb->intr + 0x200 + 0x4 * n;
> + return bus->intr + 0x200 + 0x4 * n;
> }
>
> static void __iomem *
> -pmic_arb_acc_enable_v2(struct spmi_pmic_arb *pmic_arb, u16 n)
> +pmic_arb_acc_enable_v2(struct spmi_pmic_arb_bus *bus, u16 n)
> {
> - return pmic_arb->intr + 0x1000 * n;
> + return bus->intr + 0x1000 * n;
> }
>
> static void __iomem *
> -pmic_arb_acc_enable_v5(struct spmi_pmic_arb *pmic_arb, u16 n)
> +pmic_arb_acc_enable_v5(struct spmi_pmic_arb_bus *bus, u16 n)
> {
> + struct spmi_pmic_arb *pmic_arb = bus->pmic_arb;
> return pmic_arb->wr_base + 0x100 + 0x10000 * n;
> }
>
> static void __iomem *
> -pmic_arb_acc_enable_v7(struct spmi_pmic_arb *pmic_arb, u16 n)
> +pmic_arb_acc_enable_v7(struct spmi_pmic_arb_bus *bus, u16 n)
> {
> + struct spmi_pmic_arb *pmic_arb = bus->pmic_arb;
> return pmic_arb->wr_base + 0x100 + 0x1000 * n;
> }
>
> static void __iomem *
> -pmic_arb_irq_status_v1(struct spmi_pmic_arb *pmic_arb, u16 n)
> +pmic_arb_irq_status_v1(struct spmi_pmic_arb_bus *bus, u16 n)
> {
> - return pmic_arb->intr + 0x600 + 0x4 * n;
> + return bus->intr + 0x600 + 0x4 * n;
> }
>
> static void __iomem *
> -pmic_arb_irq_status_v2(struct spmi_pmic_arb *pmic_arb, u16 n)
> +pmic_arb_irq_status_v2(struct spmi_pmic_arb_bus *bus, u16 n)
> {
> - return pmic_arb->intr + 0x4 + 0x1000 * n;
> + return bus->intr + 0x4 + 0x1000 * n;
> }
>
> static void __iomem *
> -pmic_arb_irq_status_v5(struct spmi_pmic_arb *pmic_arb, u16 n)
> +pmic_arb_irq_status_v5(struct spmi_pmic_arb_bus *bus, u16 n)
> {
> + struct spmi_pmic_arb *pmic_arb = bus->pmic_arb;
> return pmic_arb->wr_base + 0x104 + 0x10000 * n;
> }
>
> static void __iomem *
> -pmic_arb_irq_status_v7(struct spmi_pmic_arb *pmic_arb, u16 n)
> +pmic_arb_irq_status_v7(struct spmi_pmic_arb_bus *bus, u16 n)
> {
> + struct spmi_pmic_arb *pmic_arb = bus->pmic_arb;
> return pmic_arb->wr_base + 0x104 + 0x1000 * n;
> }
>
> static void __iomem *
> -pmic_arb_irq_clear_v1(struct spmi_pmic_arb *pmic_arb, u16 n)
> +pmic_arb_irq_clear_v1(struct spmi_pmic_arb_bus *bus, u16 n)
> {
> - return pmic_arb->intr + 0xA00 + 0x4 * n;
> + return bus->intr + 0xA00 + 0x4 * n;
> }
>
> static void __iomem *
> -pmic_arb_irq_clear_v2(struct spmi_pmic_arb *pmic_arb, u16 n)
> +pmic_arb_irq_clear_v2(struct spmi_pmic_arb_bus *bus, u16 n)
> {
> - return pmic_arb->intr + 0x8 + 0x1000 * n;
> + return bus->intr + 0x8 + 0x1000 * n;
> }
>
> static void __iomem *
> -pmic_arb_irq_clear_v5(struct spmi_pmic_arb *pmic_arb, u16 n)
> +pmic_arb_irq_clear_v5(struct spmi_pmic_arb_bus *bus, u16 n)
> {
> + struct spmi_pmic_arb *pmic_arb = bus->pmic_arb;
> return pmic_arb->wr_base + 0x108 + 0x10000 * n;
> }
>
> static void __iomem *
> -pmic_arb_irq_clear_v7(struct spmi_pmic_arb *pmic_arb, u16 n)
> +pmic_arb_irq_clear_v7(struct spmi_pmic_arb_bus *bus, u16 n)
> {
> + struct spmi_pmic_arb *pmic_arb = bus->pmic_arb;
> return pmic_arb->wr_base + 0x108 + 0x1000 * n;
> }
>
> @@ -1455,9 +1498,9 @@ static u32 pmic_arb_apid_map_offset_v7(u16 n)
> }
>
> static void __iomem *
> -pmic_arb_apid_owner_v2(struct spmi_pmic_arb *pmic_arb, u16 n)
> +pmic_arb_apid_owner_v2(struct spmi_pmic_arb_bus *bus, u16 n)
> {
> - return pmic_arb->cnfg + 0x700 + 0x4 * n;
> + return bus->cnfg + 0x700 + 0x4 * n;
> }
>
> /*
> @@ -1466,9 +1509,9 @@ pmic_arb_apid_owner_v2(struct spmi_pmic_arb *pmic_arb, u16 n)
> * 0.
> */
> static void __iomem *
> -pmic_arb_apid_owner_v7(struct spmi_pmic_arb *pmic_arb, u16 n)
> +pmic_arb_apid_owner_v7(struct spmi_pmic_arb_bus *bus, u16 n)
> {
> - return pmic_arb->cnfg + 0x4 * (n - pmic_arb->base_apid);
> + return bus->cnfg + 0x4 * (n - bus->base_apid);
> }
>
> static const struct pmic_arb_ver_ops pmic_arb_v1 = {
> @@ -1558,29 +1601,120 @@ static const struct irq_domain_ops pmic_arb_irq_domain_ops = {
> .translate = qpnpint_irq_domain_translate,
> };
>
> +static int spmi_pmic_arb_bus_init(struct platform_device *pdev,
> + struct device_node *node,
> + struct spmi_pmic_arb *pmic_arb)
> +{
> + struct spmi_pmic_arb_bus *bus;
> + struct device *dev = &pdev->dev;
> + struct spmi_controller *ctrl;
> + void __iomem *intr;
> + void __iomem *cnfg;
> + int index, ret;
> + u32 irq;
> +
> + ctrl = devm_spmi_controller_alloc(dev, sizeof(*bus));
> + if (IS_ERR(ctrl))
> + return PTR_ERR(ctrl);
> +
> + ctrl->cmd = pmic_arb_cmd;
> + ctrl->read_cmd = pmic_arb_read_cmd;
> + ctrl->write_cmd = pmic_arb_write_cmd;
> +
> + bus = spmi_controller_get_drvdata(ctrl);
> +
> + pmic_arb->bus = bus;
> +
> + bus->ppid_to_apid = devm_kcalloc(dev, PMIC_ARB_MAX_PPID,
> + sizeof(*bus->ppid_to_apid),
> + GFP_KERNEL);
> + if (!bus->ppid_to_apid)
> + return -ENOMEM;
> +
> + bus->apid_data = devm_kcalloc(dev, pmic_arb->max_periphs,
> + sizeof(*bus->apid_data),
> + GFP_KERNEL);
> + if (!bus->apid_data)
> + return -ENOMEM;
> +
> + index = of_property_match_string(node, "reg-names", "cnfg");
> + if (index < 0) {
> + dev_err(dev, "cnfg reg region missing");
> + return -EINVAL;
> + }
> +
> + cnfg = devm_of_iomap(dev, node, index, NULL);
> + if (IS_ERR(cnfg))
> + return PTR_ERR(cnfg);
> +
> + index = of_property_match_string(node, "reg-names", "intr");
> + if (index < 0) {
> + dev_err(dev, "intr reg region missing");
> + return -EINVAL;
> + }
> +
> + intr = devm_of_iomap(dev, node, index, NULL);
> + if (IS_ERR(intr))
> + return PTR_ERR(intr);
> +
> + irq = of_irq_get_byname(node, "periph_irq");
> + if (irq < 0)
> + return irq;
> +
> + bus->pmic_arb = pmic_arb;
> + bus->intr = intr;
> + bus->cnfg = cnfg;
> + bus->irq = irq;
> + bus->spmic = ctrl;
> +
> + ret = pmic_arb->ver_ops->init_apid(bus);
> + if (ret)
> + return ret;
> +
> + dev_dbg(&pdev->dev, "adding irq domain\n");
> +
> + bus->domain = irq_domain_add_tree(dev->of_node,
> + &pmic_arb_irq_domain_ops, bus);
> + if (!bus->domain) {
> + dev_err(&pdev->dev, "unable to create irq_domain\n");
> + return -ENOMEM;
> + }
> +
> + irq_set_chained_handler_and_data(bus->irq,
> + pmic_arb_chained_irq, bus);
> +
> + ctrl->dev.of_node = node;
> +
> + ret = devm_spmi_controller_add(dev, ctrl);
> + if (ret)
> + return ret;
> +
> + return 0;
> +}
> +
> static int spmi_pmic_arb_probe(struct platform_device *pdev)
> {
> struct spmi_pmic_arb *pmic_arb;
> - struct spmi_controller *ctrl;
> + struct device *dev = &pdev->dev;
> struct resource *res;
> void __iomem *core;
> u32 channel, ee, hw_ver;
> int err;
>
> - ctrl = devm_spmi_controller_alloc(&pdev->dev, sizeof(*pmic_arb));
> - if (IS_ERR(ctrl))
> - return PTR_ERR(ctrl);
> -
> - pmic_arb = spmi_controller_get_drvdata(ctrl);
> - pmic_arb->spmic = ctrl;
> + pmic_arb = devm_kzalloc(dev, sizeof(*pmic_arb), GFP_KERNEL);
> + if (!pmic_arb)
> + return -ENOMEM;
>
> res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "core");
> - core = devm_ioremap(&ctrl->dev, res->start, resource_size(res));
> + core = devm_ioremap(dev, res->start, resource_size(res));
> if (IS_ERR(core))
> return PTR_ERR(core);
>
> pmic_arb->core_size = resource_size(res);
>
> + platform_set_drvdata(pdev, pmic_arb);
> + raw_spin_lock_init(&pmic_arb->lock);
> +
> hw_ver = readl_relaxed(core + PMIC_ARB_VERSION);
>
> if (hw_ver < PMIC_ARB_VERSION_V2_MIN)
> @@ -1594,30 +1728,12 @@ static int spmi_pmic_arb_probe(struct platform_device *pdev)
> else
> pmic_arb->ver_ops = &pmic_arb_v7;
>
> - dev_info(&ctrl->dev, "PMIC arbiter version %s (0x%x)\n",
> - pmic_arb->ver_ops->ver_str, hw_ver);
> -
> err = pmic_arb->ver_ops->get_core_resources(pdev, core);
> if (err)
> return err;
>
> - err = pmic_arb->ver_ops->init_apid(pmic_arb);
> - if (err)
> - return err;
> -
> - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "intr");
> - pmic_arb->intr = devm_ioremap_resource(&ctrl->dev, res);
> - if (IS_ERR(pmic_arb->intr))
> - return PTR_ERR(pmic_arb->intr);
> -
> - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cnfg");
> - pmic_arb->cnfg = devm_ioremap_resource(&ctrl->dev, res);
> - if (IS_ERR(pmic_arb->cnfg))
> - return PTR_ERR(pmic_arb->cnfg);
> -
> - pmic_arb->irq = platform_get_irq_byname(pdev, "periph_irq");
> - if (pmic_arb->irq < 0)
> - return pmic_arb->irq;
> + dev_info(dev, "PMIC arbiter version %s (0x%x)\n",
> + pmic_arb->ver_ops->ver_str, hw_ver);
>
> err = of_property_read_u32(pdev->dev.of_node, "qcom,channel", &channel);
> if (err) {
> @@ -1646,42 +1762,17 @@ static int spmi_pmic_arb_probe(struct platform_device *pdev)
>
> pmic_arb->ee = ee;
>
> - platform_set_drvdata(pdev, ctrl);
> - raw_spin_lock_init(&pmic_arb->lock);
> -
> - ctrl->cmd = pmic_arb_cmd;
> - ctrl->read_cmd = pmic_arb_read_cmd;
> - ctrl->write_cmd = pmic_arb_write_cmd;
> -
> - dev_dbg(&pdev->dev, "adding irq domain\n");
> - pmic_arb->domain = irq_domain_add_tree(pdev->dev.of_node,
> - &pmic_arb_irq_domain_ops, pmic_arb);
> - if (!pmic_arb->domain) {
> - dev_err(&pdev->dev, "unable to create irq_domain\n");
> - return -ENOMEM;
> - }
> -
> - irq_set_chained_handler_and_data(pmic_arb->irq, pmic_arb_chained_irq,
> - pmic_arb);
> - err = spmi_controller_add(ctrl);
> - if (err)
> - goto err_domain_remove;
> -
> - return 0;
> -
> -err_domain_remove:
> - irq_set_chained_handler_and_data(pmic_arb->irq, NULL, NULL);
> - irq_domain_remove(pmic_arb->domain);
> - return err;
> + return spmi_pmic_arb_bus_init(pdev, dev->of_node, pmic_arb);
> }
>
> static void spmi_pmic_arb_remove(struct platform_device *pdev)
> {
> - struct spmi_controller *ctrl = platform_get_drvdata(pdev);
> - struct spmi_pmic_arb *pmic_arb = spmi_controller_get_drvdata(ctrl);
> - spmi_controller_remove(ctrl);
> - irq_set_chained_handler_and_data(pmic_arb->irq, NULL, NULL);
> - irq_domain_remove(pmic_arb->domain);
> + struct spmi_pmic_arb *pmic_arb = platform_get_drvdata(pdev);
> + struct spmi_pmic_arb_bus *bus = pmic_arb->bus;
> +
> + irq_set_chained_handler_and_data(bus->irq,
> + NULL, NULL);
> + irq_domain_remove(bus->domain);
> }
>
> static const struct of_device_id spmi_pmic_arb_match_table[] = {
>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply
* Re: [PATCH v8 7/7] spmi: pmic-arb: Add multi bus support
From: Neil Armstrong @ 2024-04-03 7:37 UTC (permalink / raw)
To: Abel Vesa, Stephen Boyd, Matthias Brugger, Bjorn Andersson,
Konrad Dybcio, Dmitry Baryshkov, AngeloGioacchino Del Regno,
Rob Herring, Krzysztof Kozlowski, Conor Dooley
Cc: Srini Kandagatla, Johan Hovold, linux-kernel, linux-arm-kernel,
linux-arm-msm, linux-mediatek, devicetree
In-Reply-To: <20240402-spmi-multi-master-support-v8-7-ce6f2d14a058@linaro.org>
On 02/04/2024 14:07, Abel Vesa wrote:
> Starting with HW version 7, there are actually two separate buses
> (with two separate sets of wires). So add support for the second bus.
> The first platform that needs this support for the second bus is the
> Qualcomm X1 Elite, so add the compatible for it as well.
>
> Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
> ---
> drivers/spmi/spmi-pmic-arb.c | 138 +++++++++++++++++++++++++++++++++++++------
> 1 file changed, 120 insertions(+), 18 deletions(-)
>
> diff --git a/drivers/spmi/spmi-pmic-arb.c b/drivers/spmi/spmi-pmic-arb.c
> index 3db622ed80de..52b9e275a7b2 100644
> --- a/drivers/spmi/spmi-pmic-arb.c
> +++ b/drivers/spmi/spmi-pmic-arb.c
> @@ -13,6 +13,7 @@
> #include <linux/kernel.h>
> #include <linux/module.h>
> #include <linux/of.h>
> +#include <linux/of_address.h>
> #include <linux/of_irq.h>
> #include <linux/platform_device.h>
> #include <linux/slab.h>
> @@ -95,6 +96,8 @@ enum pmic_arb_channel {
> PMIC_ARB_CHANNEL_OBS,
> };
>
> +#define PMIC_ARB_MAX_BUSES 2
> +
> /* Maximum number of support PMIC peripherals */
> #define PMIC_ARB_MAX_PERIPHS 512
> #define PMIC_ARB_MAX_PERIPHS_V7 1024
> @@ -148,6 +151,7 @@ struct spmi_pmic_arb;
> * @min_apid: minimum APID (used for bounding IRQ search)
> * @max_apid: maximum APID
> * @irq: PMIC ARB interrupt.
> + * @id: unique ID of the bus
> */
> struct spmi_pmic_arb_bus {
> struct spmi_pmic_arb *pmic_arb;
> @@ -165,6 +169,7 @@ struct spmi_pmic_arb_bus {
> u16 min_apid;
> u16 max_apid;
> int irq;
> + u8 id;
> };
>
> /**
> @@ -179,7 +184,8 @@ struct spmi_pmic_arb_bus {
> * @ee: the current Execution Environment
> * @ver_ops: version dependent operations.
> * @max_periphs: Number of elements in apid_data[]
> - * @bus: per arbiter bus instance
> + * @buses: per arbiter buses instances
> + * @buses_available: number of buses registered
> */
> struct spmi_pmic_arb {
> void __iomem *rd_base;
> @@ -191,7 +197,8 @@ struct spmi_pmic_arb {
> u8 ee;
> const struct pmic_arb_ver_ops *ver_ops;
> int max_periphs;
> - struct spmi_pmic_arb_bus *bus;
> + struct spmi_pmic_arb_bus *buses[PMIC_ARB_MAX_BUSES];
> + int buses_available;
> };
>
> /**
> @@ -220,7 +227,7 @@ struct spmi_pmic_arb {
> struct pmic_arb_ver_ops {
> const char *ver_str;
> int (*get_core_resources)(struct platform_device *pdev, void __iomem *core);
> - int (*init_apid)(struct spmi_pmic_arb_bus *bus);
> + int (*init_apid)(struct spmi_pmic_arb_bus *bus, int index);
> int (*ppid_to_apid)(struct spmi_pmic_arb_bus *bus, u16 ppid);
> /* spmi commands (read_cmd, write_cmd, cmd) functionality */
> int (*offset)(struct spmi_pmic_arb_bus *bus, u8 sid, u16 addr,
> @@ -309,8 +316,8 @@ static int pmic_arb_wait_for_done(struct spmi_controller *ctrl,
> }
>
> if (status & PMIC_ARB_STATUS_FAILURE) {
> - dev_err(&ctrl->dev, "%s: %#x %#x: transaction failed (%#x)\n",
> - __func__, sid, addr, status);
> + dev_err(&ctrl->dev, "%s: %#x %#x: transaction failed (%#x) reg: 0x%x\n",
> + __func__, sid, addr, status, offset);
> WARN_ON(1);
> return -EIO;
> }
> @@ -326,8 +333,8 @@ static int pmic_arb_wait_for_done(struct spmi_controller *ctrl,
> udelay(1);
> }
>
> - dev_err(&ctrl->dev, "%s: %#x %#x: timeout, status %#x\n",
> - __func__, sid, addr, status);
> + dev_err(&ctrl->dev, "%s: %#x %#x %#x: timeout, status %#x\n",
> + __func__, bus->id, sid, addr, status);
> return -ETIMEDOUT;
> }
>
> @@ -1006,11 +1013,17 @@ static int pmic_arb_get_core_resources_v1(struct platform_device *pdev,
> return 0;
> }
>
> -static int pmic_arb_init_apid_v1(struct spmi_pmic_arb_bus *bus)
> +static int pmic_arb_init_apid_v1(struct spmi_pmic_arb_bus *bus, int index)
> {
> struct spmi_pmic_arb *pmic_arb = bus->pmic_arb;
> u32 *mapping_table;
>
> + if (index) {
> + dev_err(&bus->spmic->dev, "Unsupported buses count %d detected\n",
> + index);
> + return -EINVAL;
> + }
> +
> mapping_table = devm_kcalloc(&bus->spmic->dev, pmic_arb->max_periphs,
> sizeof(*mapping_table), GFP_KERNEL);
> if (!mapping_table)
> @@ -1253,11 +1266,17 @@ static int pmic_arb_offset_v2(struct spmi_pmic_arb_bus *bus, u8 sid, u16 addr,
> return 0x1000 * pmic_arb->ee + 0x8000 * apid;
> }
>
> -static int pmic_arb_init_apid_v5(struct spmi_pmic_arb_bus *bus)
> +static int pmic_arb_init_apid_v5(struct spmi_pmic_arb_bus *bus, int index)
> {
> struct spmi_pmic_arb *pmic_arb = bus->pmic_arb;
> int ret;
>
> + if (index) {
> + dev_err(&bus->spmic->dev, "Unsupported buses count %d detected\n",
> + index);
> + return -EINVAL;
> + }
> +
> bus->base_apid = 0;
> bus->apid_count = readl_relaxed(pmic_arb->core + PMIC_ARB_FEATURES) &
> PMIC_ARB_FEATURES_PERIPH_MASK;
> @@ -1329,6 +1348,50 @@ static int pmic_arb_get_core_resources_v7(struct platform_device *pdev,
> return pmic_arb_get_obsrvr_chnls_v2(pdev);
> }
>
> +/*
> + * Only v7 supports 2 buses. Each bus will get a different apid count, read
> + * from different registers.
> + */
> +static int pmic_arb_init_apid_v7(struct spmi_pmic_arb_bus *bus, int index)
> +{
> + struct spmi_pmic_arb *pmic_arb = bus->pmic_arb;
> + int ret;
> +
> + if (index == 0) {
> + bus->base_apid = 0;
> + bus->apid_count = readl_relaxed(pmic_arb->core + PMIC_ARB_FEATURES) &
> + PMIC_ARB_FEATURES_PERIPH_MASK;
> + } else if (index == 1) {
> + bus->base_apid = readl_relaxed(pmic_arb->core + PMIC_ARB_FEATURES) &
> + PMIC_ARB_FEATURES_PERIPH_MASK;
> + bus->apid_count = readl_relaxed(pmic_arb->core + PMIC_ARB_FEATURES1) &
> + PMIC_ARB_FEATURES_PERIPH_MASK;
> + } else {
> + dev_err(&bus->spmic->dev, "Unsupported buses count %d detected\n",
> + bus->id);
> + return -EINVAL;
> + }
> +
> + if (bus->base_apid + bus->apid_count > pmic_arb->max_periphs) {
> + dev_err(&bus->spmic->dev, "Unsupported APID count %d detected\n",
> + bus->base_apid + bus->apid_count);
> + return -EINVAL;
> + }
> +
> + ret = pmic_arb_init_apid_min_max(bus);
> + if (ret)
> + return ret;
> +
> + ret = pmic_arb_read_apid_map_v5(bus);
> + if (ret) {
> + dev_err(&bus->spmic->dev, "could not read APID->PPID mapping table, rc= %d\n",
> + ret);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> /*
> * v7 offset per ee and per apid for observer channels and per apid for
> * read/write channels.
> @@ -1581,7 +1644,7 @@ static const struct pmic_arb_ver_ops pmic_arb_v5 = {
> static const struct pmic_arb_ver_ops pmic_arb_v7 = {
> .ver_str = "v7",
> .get_core_resources = pmic_arb_get_core_resources_v7,
> - .init_apid = pmic_arb_init_apid_v5,
> + .init_apid = pmic_arb_init_apid_v7,
> .ppid_to_apid = pmic_arb_ppid_to_apid_v5,
> .non_data_cmd = pmic_arb_non_data_cmd_v2,
> .offset = pmic_arb_offset_v7,
> @@ -1605,6 +1668,7 @@ static int spmi_pmic_arb_bus_init(struct platform_device *pdev,
> struct device_node *node,
> struct spmi_pmic_arb *pmic_arb)
> {
> + int bus_index = pmic_arb->buses_available;
> struct spmi_pmic_arb_bus *bus;
> struct device *dev = &pdev->dev;
> struct spmi_controller *ctrl;
> @@ -1623,7 +1687,7 @@ static int spmi_pmic_arb_bus_init(struct platform_device *pdev,
>
> bus = spmi_controller_get_drvdata(ctrl);
>
> - pmic_arb->bus = bus;
> + pmic_arb->buses[bus_index] = bus;
>
> bus->ppid_to_apid = devm_kcalloc(dev, PMIC_ARB_MAX_PPID,
> sizeof(*bus->ppid_to_apid),
> @@ -1666,12 +1730,13 @@ static int spmi_pmic_arb_bus_init(struct platform_device *pdev,
> bus->cnfg = cnfg;
> bus->irq = irq;
> bus->spmic = ctrl;
> + bus->id = bus_index;
>
> - ret = pmic_arb->ver_ops->init_apid(bus);
> + ret = pmic_arb->ver_ops->init_apid(bus, bus_index);
> if (ret)
> return ret;
>
> - dev_dbg(&pdev->dev, "adding irq domain\n");
> + dev_dbg(&pdev->dev, "adding irq domain for bus %d\n", bus_index);
>
> bus->domain = irq_domain_add_tree(dev->of_node,
> &pmic_arb_irq_domain_ops, bus);
> @@ -1684,14 +1749,53 @@ static int spmi_pmic_arb_bus_init(struct platform_device *pdev,
> pmic_arb_chained_irq, bus);
>
> ctrl->dev.of_node = node;
> + dev_set_name(&ctrl->dev, "spmi-%d", bus_index);
>
> ret = devm_spmi_controller_add(dev, ctrl);
> if (ret)
> return ret;
>
> + pmic_arb->buses_available++;
> +
> return 0;
> }
>
> +static int spmi_pmic_arb_register_buses(struct spmi_pmic_arb *pmic_arb,
> + struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct device_node *node = dev->of_node;
> + struct device_node *child;
> + int ret;
> +
> + /* legacy mode doesn't provide child node for the bus */
> + if (of_device_is_compatible(node, "qcom,spmi-pmic-arb"))
> + return spmi_pmic_arb_bus_init(pdev, node, pmic_arb);
> +
> + for_each_available_child_of_node(node, child) {
> + if (of_node_name_eq(child, "spmi")) {
> + ret = spmi_pmic_arb_bus_init(pdev, child, pmic_arb);
> + if (ret)
> + return ret;
> + }
> + }
> +
> + return ret;
> +}
> +
> +static void spmi_pmic_arb_deregister_buses(struct spmi_pmic_arb *pmic_arb)
> +{
> + int i;
> +
> + for (i = 0; i < PMIC_ARB_MAX_BUSES; i++) {
> + struct spmi_pmic_arb_bus *bus = pmic_arb->buses[i];
> +
> + irq_set_chained_handler_and_data(bus->irq,
> + NULL, NULL);
> + irq_domain_remove(bus->domain);
> + }
> +}
> +
> static int spmi_pmic_arb_probe(struct platform_device *pdev)
> {
> struct spmi_pmic_arb *pmic_arb;
> @@ -1762,21 +1866,19 @@ static int spmi_pmic_arb_probe(struct platform_device *pdev)
>
> pmic_arb->ee = ee;
>
> - return spmi_pmic_arb_bus_init(pdev, dev->of_node, pmic_arb);
> + return spmi_pmic_arb_register_buses(pmic_arb, pdev);
> }
>
> static void spmi_pmic_arb_remove(struct platform_device *pdev)
> {
> struct spmi_pmic_arb *pmic_arb = platform_get_drvdata(pdev);
> - struct spmi_pmic_arb_bus *bus = pmic_arb->bus;
>
> - irq_set_chained_handler_and_data(bus->irq,
> - NULL, NULL);
> - irq_domain_remove(bus->domain);
> + spmi_pmic_arb_deregister_buses(pmic_arb);
> }
>
> static const struct of_device_id spmi_pmic_arb_match_table[] = {
> { .compatible = "qcom,spmi-pmic-arb", },
> + { .compatible = "qcom,x1e80100-spmi-pmic-arb", },
> {},
> };
> MODULE_DEVICE_TABLE(of, spmi_pmic_arb_match_table);
>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply
* Re: [PATCH v2 02/18] PCI: endpoint: Introduce pci_epc_map_align()
From: Manivannan Sadhasivam @ 2024-04-03 7:45 UTC (permalink / raw)
To: Damien Le Moal
Cc: Lorenzo Pieralisi, Kishon Vijay Abraham I, Shawn Lin,
Krzysztof Wilczyński, Bjorn Helgaas, Heiko Stuebner,
linux-pci, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
devicetree, linux-rockchip, linux-arm-kernel, Rick Wertenbroek,
Wilfred Mallawa, Niklas Cassel
In-Reply-To: <20240330041928.1555578-3-dlemoal@kernel.org>
On Sat, Mar 30, 2024 at 01:19:12PM +0900, Damien Le Moal wrote:
> Some endpoint controllers have requirements on the alignment of the
> controller physical memory address that must be used to map a RC PCI
> address region. For instance, the rockchip endpoint controller uses
> at most the lower 20 bits of a physical memory address region as the
> lower bits of an RC PCI address. For mapping a PCI address region of
> size bytes starting from pci_addr, the exact number of address bits
> used is the number of address bits changing in the address range
> [pci_addr..pci_addr + size - 1].
>
> For this example, this creates the following constraints:
> 1) The offset into the controller physical memory allocated for a
> mapping depends on the mapping size *and* the starting PCI address
> for the mapping.
> 2) A mapping size cannot exceed the controller windows size (1MB) minus
> the offset needed into the allocated physical memory, which can end
> up being a smaller size than the desired mapping size.
>
> Handling these constraints independently of the controller being used in
> a PCI EP function driver is not possible with the current EPC API as
> it only provides the ->align field in struct pci_epc_features.
> Furthermore, this alignment is static and does not depend on a mapping
> pci address and size.
>
> Solve this by introducing the function pci_epc_map_align() and the
> endpoint controller operation ->map_align to allow endpoint function
> drivers to obtain the size and the offset into a controller address
> region that must be used to map an RC PCI address region. The size
> of the physical address region provided by pci_epc_map_align() can then
> be used as the size argument for the function pci_epc_mem_alloc_addr().
> The offset into the allocated controller memory can be used to
> correctly handle data transfers. Of note is that pci_epc_map_align() may
> indicate upon return a mapping size that is smaller (but not 0) than the
> requested PCI address region size. For such case, an endpoint function
> driver must handle data transfers in fragments.
>
Is there any incentive in exposing pci_epc_map_align()? I mean, why can't it be
hidden inside the new alloc() API itself?
Furthermore, is it possible to avoid the map_align() callback and handle the
alignment within the EPC driver?
- Mani
> The controller operation ->map_align is optional: controllers that do
> not have any address alignment constraints for mapping a RC PCI address
> region do not need to implement this operation. For such controllers,
> pci_epc_map_align() always returns the mapping size as equal
> to the requested size and an offset equal to 0.
>
> The structure pci_epc_map is introduced to represent a mapping start PCI
> address, size and the size and offset into the controller memory needed
> for mapping the PCI address region.
>
> Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
> ---
> drivers/pci/endpoint/pci-epc-core.c | 66 +++++++++++++++++++++++++++++
> include/linux/pci-epc.h | 33 +++++++++++++++
> 2 files changed, 99 insertions(+)
>
> diff --git a/drivers/pci/endpoint/pci-epc-core.c b/drivers/pci/endpoint/pci-epc-core.c
> index 754afd115bbd..37758ca91d7f 100644
> --- a/drivers/pci/endpoint/pci-epc-core.c
> +++ b/drivers/pci/endpoint/pci-epc-core.c
> @@ -433,6 +433,72 @@ void pci_epc_unmap_addr(struct pci_epc *epc, u8 func_no, u8 vfunc_no,
> }
> EXPORT_SYMBOL_GPL(pci_epc_unmap_addr);
>
> +/**
> + * pci_epc_map_align() - Get the offset into and the size of a controller memory
> + * address region needed to map a RC PCI address region
> + * @epc: the EPC device on which address is allocated
> + * @func_no: the physical endpoint function number in the EPC device
> + * @vfunc_no: the virtual endpoint function number in the physical function
> + * @pci_addr: PCI address to which the physical address should be mapped
> + * @size: the size of the mapping starting from @pci_addr
> + * @map: populate here the actual size and offset into the controller memory
> + * that must be allocated for the mapping
> + *
> + * Invoke the controller map_align operation to obtain the size and the offset
> + * into a controller address region that must be allocated to map @size
> + * bytes of the RC PCI address space starting from @pci_addr.
> + *
> + * The size of the mapping that can be handled by the controller is indicated
> + * using the pci_size field of @map. This size may be smaller than the requested
> + * @size. In such case, the function driver must handle the mapping using
> + * several fragments. The offset into the controller memory for the effective
> + * mapping of the @pci_addr..@pci_addr+@map->pci_size address range is indicated
> + * using the map_ofst field of @map.
> + */
> +int pci_epc_map_align(struct pci_epc *epc, u8 func_no, u8 vfunc_no,
> + u64 pci_addr, size_t size, struct pci_epc_map *map)
> +{
> + const struct pci_epc_features *features;
> + size_t mask;
> + int ret;
> +
> + if (!pci_epc_function_is_valid(epc, func_no, vfunc_no))
> + return -EINVAL;
> +
> + if (!size || !map)
> + return -EINVAL;
> +
> + memset(map, 0, sizeof(*map));
> + map->pci_addr = pci_addr;
> + map->pci_size = size;
> +
> + if (epc->ops->map_align) {
> + mutex_lock(&epc->lock);
> + ret = epc->ops->map_align(epc, func_no, vfunc_no, map);
> + mutex_unlock(&epc->lock);
> + return ret;
> + }
> +
> + /*
> + * Assume a fixed alignment constraint as specified by the controller
> + * features.
> + */
> + features = pci_epc_get_features(epc, func_no, vfunc_no);
> + if (!features || !features->align) {
> + map->map_pci_addr = pci_addr;
> + map->map_size = size;
> + map->map_ofst = 0;
These values are overwritten anyway below.
> + }
> +
> + mask = features->align - 1;
> + map->map_pci_addr = map->pci_addr & ~mask;
> + map->map_ofst = map->pci_addr & mask;
> + map->map_size = ALIGN(map->map_ofst + map->pci_size, features->align);
> +
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(pci_epc_map_align);
> +
> /**
> * pci_epc_map_addr() - map CPU address to PCI address
> * @epc: the EPC device on which address is allocated
> diff --git a/include/linux/pci-epc.h b/include/linux/pci-epc.h
> index cc2f70d061c8..8cfb4aaf2628 100644
> --- a/include/linux/pci-epc.h
> +++ b/include/linux/pci-epc.h
> @@ -32,11 +32,40 @@ pci_epc_interface_string(enum pci_epc_interface_type type)
> }
> }
>
> +/**
> + * struct pci_epc_map - information about EPC memory for mapping a RC PCI
> + * address range
> + * @pci_addr: start address of the RC PCI address range to map
> + * @pci_size: size of the RC PCI address range to map
> + * @map_pci_addr: RC PCI address used as the first address mapped
> + * @map_size: size of the controller memory needed for the mapping
> + * @map_ofst: offset into the controller memory needed for the mapping
> + * @phys_base: base physical address of the allocated EPC memory
> + * @phys_addr: physical address at which @pci_addr is mapped
> + * @virt_base: base virtual address of the allocated EPC memory
> + * @virt_addr: virtual address at which @pci_addr is mapped
> + */
> +struct pci_epc_map {
> + phys_addr_t pci_addr;
> + size_t pci_size;
> +
> + phys_addr_t map_pci_addr;
> + size_t map_size;
> + phys_addr_t map_ofst;
> +
> + phys_addr_t phys_base;
> + phys_addr_t phys_addr;
> + void __iomem *virt_base;
> + void __iomem *virt_addr;
> +};
> +
> /**
> * struct pci_epc_ops - set of function pointers for performing EPC operations
> * @write_header: ops to populate configuration space header
> * @set_bar: ops to configure the BAR
> * @clear_bar: ops to reset the BAR
> + * @map_align: operation to get the size and offset into a controller memory
> + * window needed to map an RC PCI address region
> * @map_addr: ops to map CPU address to PCI address
> * @unmap_addr: ops to unmap CPU address and PCI address
> * @set_msi: ops to set the requested number of MSI interrupts in the MSI
> @@ -61,6 +90,8 @@ struct pci_epc_ops {
> struct pci_epf_bar *epf_bar);
> void (*clear_bar)(struct pci_epc *epc, u8 func_no, u8 vfunc_no,
> struct pci_epf_bar *epf_bar);
> + int (*map_align)(struct pci_epc *epc, u8 func_no, u8 vfunc_no,
> + struct pci_epc_map *map);
> int (*map_addr)(struct pci_epc *epc, u8 func_no, u8 vfunc_no,
> phys_addr_t addr, u64 pci_addr, size_t size);
> void (*unmap_addr)(struct pci_epc *epc, u8 func_no, u8 vfunc_no,
> @@ -234,6 +265,8 @@ int pci_epc_set_bar(struct pci_epc *epc, u8 func_no, u8 vfunc_no,
> struct pci_epf_bar *epf_bar);
> void pci_epc_clear_bar(struct pci_epc *epc, u8 func_no, u8 vfunc_no,
> struct pci_epf_bar *epf_bar);
> +int pci_epc_map_align(struct pci_epc *epc, u8 func_no, u8 vfunc_no,
> + u64 pci_addr, size_t size, struct pci_epc_map *map);
> int pci_epc_map_addr(struct pci_epc *epc, u8 func_no, u8 vfunc_no,
> phys_addr_t phys_addr,
> u64 pci_addr, size_t size);
> --
> 2.44.0
>
--
மணிவண்ணன் சதாசிவம்
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply
* [PATCH v12 0/7] drm/meson: add support for MIPI DSI Display
From: Neil Armstrong @ 2024-04-03 7:46 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Martin Blumenstingl, Jerome Brunet, Kevin Hilman,
Michael Turquette, Stephen Boyd, Maarten Lankhorst, Maxime Ripard,
Thomas Zimmermann, David Airlie, Daniel Vetter, Jagan Teki,
Nicolas Belin
Cc: devicetree, linux-kernel, linux-amlogic, linux-clk,
linux-arm-kernel, dri-devel, Neil Armstrong, Conor Dooley,
Lukas F. Hartmann
The Amlogic G12A, G12B & SM1 SoCs embeds a Synopsys DW-MIPI-DSI transceiver (ver 1.21a),
with a custom glue managing the IP resets, clock and data input similar to the DW-HDMI
glue on the same Amlogic SoCs.
This is a follow-up of v5 now the DRM patches are applied, the clk & DT changes
remains for a full DSI support on G12A & SM1 platforms.
The DW-MIPI-DSI transceiver + D-PHY are clocked by the GP0 PLL, and the ENCL encoder + VIU
pixel reader by the VCLK2 clock using the HDMI PLL.
The DW-MIPI-DSI transceiver gets this pixel stream as input clocked with the VCLK2 clock.
An optional "MEAS" clock can be enabled to measure the delay between each vsync feeding the
DW-MIPI-DSI transceiver.
The clock setup has been redesigned to use CCF, a common PLL (GP0) and the VCLK2 clock
path for DSI in preparation of full CCF support and possibly dual display with HDMI.
The change from v5 is that now we use a "VCLK" driver instead of notifier and rely
on CLK_SET_RATE_GATE to ensure the VCLK gate operation are called.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
Changes in v12:
- fix parameters alignment in patch 2
- update g12a_mipi_dsi_pxclk_div_table comment with jerome's suggestions
- fix dtbs overlay build, fix missed v11... thx khadas for reporting it off-list & testing
- Link to v11: https://lore.kernel.org/r/20240325-amlogic-v6-4-upstream-dsi-ccf-vim3-v11-0-04f55de44604@linaro.org
Changes in v11:
- Rebased on v6.9-rc1
- Fixed overlay handling/creation
- Link to v10: https://lore.kernel.org/r/20240205-amlogic-v6-4-upstream-dsi-ccf-vim3-v10-0-dc06073d5330@linaro.org
Changes in v10:
- Rename regmap_vclk to meson_clk and add _gate for the gate
- Move COMMON_CLK_MESON_VCLK to following patch
- Remove CLK_SET_RATE_PARENT from g12a_vclk2_sel, keep it only on mipi_dsi_pxclk_sel
- Add more info on commit message to specify how clock setup is designed
- Remove forgotten CLK_IGNORE_UNUSED on g12a_vclk2_input
- Remove useless CLK_SET_RATE_PARENT on g12a_vclk2_div to stop propagatting rate _after_ vclk2_div
- Remove invalid CLK_SET_RATE_GATE on g12a_vclk2 since it's not a divider...
- Drop already applied patches
- move Khadas TS050 changes as an overlay
- Link to v9: https://lore.kernel.org/r/20231124-amlogic-v6-4-upstream-dsi-ccf-vim3-v9-0-95256ed139e6@linaro.org
Changes in v9:
- Colledte reviewed-bys
- Fixed patches 2 & 4, commit messages and bindings format
- Link to v8: https://lore.kernel.org/r/20231109-amlogic-v6-4-upstream-dsi-ccf-vim3-v8-0-81e4aeeda193@linaro.org
Changes in v8:
- Switch vclk clk driver to parm as requested by Jerome
- Added bindings fixes to amlogic,meson-axg-mipi-pcie-analog & amlogic,g12a-mipi-dphy-analog
- Fixed DT errors in vim3 example and MNT Reform DT
- Rebased on next-20231107, successfully tested on VIM3L
- Link to v7: https://lore.kernel.org/r/20230803-amlogic-v6-4-upstream-dsi-ccf-vim3-v7-0-762219fc5b28@linaro.org
Changes in v7:
- Added review tags
- Fixed patch 5 thanks to George
- Link to v6: https://lore.kernel.org/r/20230512-amlogic-v6-4-upstream-dsi-ccf-vim3-v6-0-fd2ac9845472@linaro.org
Changes in v6:
- dropped applied DRM patches
- dropped clk private prefix patches
- rebased on top of 20230607-topic-amlogic-upstream-clkid-public-migration-v2-0-38172d17c27a@linaro.org
- re-ordered/cleaned ENCL patches to match clkid public migration
- Added new "vclk" driver
- uses vclk driver instead of notifier
- cleaned VCLK2 clk flags
- add px_clk gating from DSI driver
- Link to v5: https://lore.kernel.org/r/20230512-amlogic-v6-4-upstream-dsi-ccf-vim3-v5-0-56eb7a4d5b8e@linaro.org
Changes in v5:
- Aded PRIV all the G12 internal clk IDS to simplify public exposing
- Fixed the DSI bindings
- Fixed the DSI HSYNC/VSYNC polarity handling
- Fixed the DSI clock setup
- Fixed the DSI phy timings
- Dropped components for DSI, only keeping it for HDMI
- Added MNT Reform 2 CM4 DT
- Dropped already applied PHY fix
- Link to v4: https://lore.kernel.org/r/20230512-amlogic-v6-4-upstream-dsi-ccf-vim3-v4-0-2592c29ea263@linaro.org
Changes from v3 at [3]:
- switched all clk setup via CCF
- using single PLL for DSI controller & ENCL encoder
- added ENCL clocks to CCF
- make the VCLK2 clocks configuration by CCF
- fixed probe/bind of DSI controller to work with panels & bridges
- added bit_clk to controller to it can setup the BIT clock aswell
- added fix for components unbind
- added fix for analog phy setup value
- added TS050 timings fix
- dropped previous clk control patch
Changes from v2 at [2]:
- Fixed patch 3
- Added reviews from Jagan
- Rebased on v5.19-rc1
Changes from v1 at [1]:
- fixed DSI host bindings
- add reviewed-by tags for bindings
- moved magic values to defines thanks to Martin's searches
- added proper prefixes to defines
- moved phy_configure to phy_init() dw-mipi-dsi callback
- moved phy_on to a new phy_power_on() dw-mipi-dsi callback
- correctly return phy_init/configure errors to callback returns
[1] https://lore.kernel.org/r/20200907081825.1654-1-narmstrong@baylibre.com
[2] https://lore.kernel.org/r/20220120083357.1541262-1-narmstrong@baylibre.com
[3] https://lore.kernel.org/r/20220617072723.1742668-1-narmstrong@baylibre.com
---
Neil Armstrong (7):
dt-bindings: arm: amlogic: Document the MNT Reform 2 CM4 adapter with a BPI-CM4 Module
clk: meson: add vclk driver
clk: meson: g12a: make VCLK2 and ENCL clock path configurable by CCF
drm/meson: gate px_clk when setting rate
arm64: meson: g12-common: add the MIPI DSI nodes
arm64: meson: khadas-vim3l: add TS050 DSI panel overlay
arm64: dts: amlogic: meson-g12b-bananapi-cm4: add support for MNT Reform2 with CM4 adaper
Documentation/devicetree/bindings/arm/amlogic.yaml | 1 +
arch/arm64/boot/dts/amlogic/Makefile | 5 +
arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi | 70 ++++
.../meson-g12b-bananapi-cm4-mnt-reform2.dts | 384 +++++++++++++++++++++
.../boot/dts/amlogic/meson-khadas-vim3-ts050.dtso | 108 ++++++
drivers/clk/meson/Kconfig | 5 +
drivers/clk/meson/Makefile | 1 +
drivers/clk/meson/g12a.c | 76 ++--
drivers/clk/meson/vclk.c | 141 ++++++++
drivers/clk/meson/vclk.h | 51 +++
drivers/gpu/drm/meson/meson_dw_mipi_dsi.c | 7 +
11 files changed, 829 insertions(+), 20 deletions(-)
---
base-commit: 4cece764965020c22cff7665b18a012006359095
change-id: 20230512-amlogic-v6-4-upstream-dsi-ccf-vim3-b8e5217e1f4a
Best regards,
--
Neil Armstrong <neil.armstrong@linaro.org>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply
* [PATCH v12 3/7] clk: meson: g12a: make VCLK2 and ENCL clock path configurable by CCF
From: Neil Armstrong @ 2024-04-03 7:46 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Martin Blumenstingl, Jerome Brunet, Kevin Hilman,
Michael Turquette, Stephen Boyd, Maarten Lankhorst, Maxime Ripard,
Thomas Zimmermann, David Airlie, Daniel Vetter, Jagan Teki,
Nicolas Belin
Cc: devicetree, linux-kernel, linux-amlogic, linux-clk,
linux-arm-kernel, dri-devel, Neil Armstrong
In-Reply-To: <20240403-amlogic-v6-4-upstream-dsi-ccf-vim3-v12-0-99ecdfdc87fc@linaro.org>
In order to setup the DSI clock, let's make the unused VCLK2 clock path
configuration via CCF.
The nocache option is removed from following clocks:
- vclk2_sel
- vclk2_input
- vclk2_div
- vclk2
- vclk_div1
- vclk2_div2_en
- vclk2_div4_en
- vclk2_div6_en
- vclk2_div12_en
- vclk2_div2
- vclk2_div4
- vclk2_div6
- vclk2_div12
- cts_encl_sel
vclk2 and vclk2_div uses the newly introduced vclk regmap driver
to handle the enable and reset bits.
In order to set a rate on cts_encl via the vclk2 clock path,
the NO_REPARENT flag is set on cts_encl_sel & vclk2_sel in order
to keep CCF from selection a parent.
The parents of cts_encl_sel & vclk2_sel are expected to be defined
in DT or manually set by the display driver at some point.
The following clock scheme is to be used for DSI:
xtal
\_ gp0_pll_dco
\_ gp0_pll
|- vclk2_sel
| \_ vclk2_input
| \_ vclk2_div
| \_ vclk2
| \_ vclk2_div1
| \_ cts_encl_sel
| \_ cts_encl -> to VPU LCD Encoder
|- mipi_dsi_pxclk_sel
\_ mipi_dsi_pxclk_div
\_ mipi_dsi_pxclk -> to DSI controller
The mipi_dsi_pxclk_div is set as bypass with a single /1 entry in div_table
in order to use the same GP0 for mipi_dsi_pxclk and vclk2_input.
The SET_RATE_PARENT is only set on the mipi_dsi_pxclk_sel clock so the
DSI bitclock is the reference base clock to calculate the vclk2_div value
when pixel clock is set on the cts_encl endpoint.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
drivers/clk/meson/Kconfig | 1 +
drivers/clk/meson/g12a.c | 76 ++++++++++++++++++++++++++++++++++-------------
2 files changed, 57 insertions(+), 20 deletions(-)
diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig
index 8a9823789fa3..59a40a49f8e1 100644
--- a/drivers/clk/meson/Kconfig
+++ b/drivers/clk/meson/Kconfig
@@ -144,6 +144,7 @@ config COMMON_CLK_G12A
select COMMON_CLK_MESON_EE_CLKC
select COMMON_CLK_MESON_CPU_DYNDIV
select COMMON_CLK_MESON_VID_PLL_DIV
+ select COMMON_CLK_MESON_VCLK
select MFD_SYSCON
help
Support for the clock controller on Amlogic S905D2, S905X2 and S905Y2
diff --git a/drivers/clk/meson/g12a.c b/drivers/clk/meson/g12a.c
index 90f4c6103014..df7e17c850d8 100644
--- a/drivers/clk/meson/g12a.c
+++ b/drivers/clk/meson/g12a.c
@@ -22,6 +22,7 @@
#include "clk-regmap.h"
#include "clk-cpu-dyndiv.h"
#include "vid-pll-div.h"
+#include "vclk.h"
#include "meson-eeclk.h"
#include "g12a.h"
@@ -3165,7 +3166,7 @@ static struct clk_regmap g12a_vclk2_sel = {
.ops = &clk_regmap_mux_ops,
.parent_hws = g12a_vclk_parent_hws,
.num_parents = ARRAY_SIZE(g12a_vclk_parent_hws),
- .flags = CLK_SET_RATE_NO_REPARENT | CLK_GET_RATE_NOCACHE,
+ .flags = CLK_SET_RATE_NO_REPARENT,
},
};
@@ -3193,7 +3194,6 @@ static struct clk_regmap g12a_vclk2_input = {
.ops = &clk_regmap_gate_ops,
.parent_hws = (const struct clk_hw *[]) { &g12a_vclk2_sel.hw },
.num_parents = 1,
- .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
},
};
@@ -3215,19 +3215,32 @@ static struct clk_regmap g12a_vclk_div = {
};
static struct clk_regmap g12a_vclk2_div = {
- .data = &(struct clk_regmap_div_data){
- .offset = HHI_VIID_CLK_DIV,
- .shift = 0,
- .width = 8,
+ .data = &(struct meson_vclk_div_data){
+ .div = {
+ .reg_off = HHI_VIID_CLK_DIV,
+ .shift = 0,
+ .width = 8,
+ },
+ .enable = {
+ .reg_off = HHI_VIID_CLK_DIV,
+ .shift = 16,
+ .width = 1,
+ },
+ .reset = {
+ .reg_off = HHI_VIID_CLK_DIV,
+ .shift = 17,
+ .width = 1,
+ },
+ .flags = CLK_DIVIDER_ROUND_CLOSEST,
},
.hw.init = &(struct clk_init_data){
.name = "vclk2_div",
- .ops = &clk_regmap_divider_ops,
+ .ops = &meson_vclk_div_ops,
.parent_hws = (const struct clk_hw *[]) {
&g12a_vclk2_input.hw
},
.num_parents = 1,
- .flags = CLK_GET_RATE_NOCACHE,
+ .flags = CLK_SET_RATE_GATE,
},
};
@@ -3246,16 +3259,24 @@ static struct clk_regmap g12a_vclk = {
};
static struct clk_regmap g12a_vclk2 = {
- .data = &(struct clk_regmap_gate_data){
- .offset = HHI_VIID_CLK_CNTL,
- .bit_idx = 19,
+ .data = &(struct meson_vclk_gate_data){
+ .enable = {
+ .reg_off = HHI_VIID_CLK_CNTL,
+ .shift = 19,
+ .width = 1,
+ },
+ .reset = {
+ .reg_off = HHI_VIID_CLK_CNTL,
+ .shift = 15,
+ .width = 1,
+ },
},
.hw.init = &(struct clk_init_data) {
.name = "vclk2",
- .ops = &clk_regmap_gate_ops,
+ .ops = &meson_vclk_gate_ops,
.parent_hws = (const struct clk_hw *[]) { &g12a_vclk2_div.hw },
.num_parents = 1,
- .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
+ .flags = CLK_SET_RATE_PARENT,
},
};
@@ -3339,7 +3360,7 @@ static struct clk_regmap g12a_vclk2_div1 = {
.ops = &clk_regmap_gate_ops,
.parent_hws = (const struct clk_hw *[]) { &g12a_vclk2.hw },
.num_parents = 1,
- .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
+ .flags = CLK_SET_RATE_PARENT,
},
};
@@ -3353,7 +3374,7 @@ static struct clk_regmap g12a_vclk2_div2_en = {
.ops = &clk_regmap_gate_ops,
.parent_hws = (const struct clk_hw *[]) { &g12a_vclk2.hw },
.num_parents = 1,
- .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
+ .flags = CLK_SET_RATE_PARENT,
},
};
@@ -3367,7 +3388,7 @@ static struct clk_regmap g12a_vclk2_div4_en = {
.ops = &clk_regmap_gate_ops,
.parent_hws = (const struct clk_hw *[]) { &g12a_vclk2.hw },
.num_parents = 1,
- .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
+ .flags = CLK_SET_RATE_PARENT,
},
};
@@ -3381,7 +3402,7 @@ static struct clk_regmap g12a_vclk2_div6_en = {
.ops = &clk_regmap_gate_ops,
.parent_hws = (const struct clk_hw *[]) { &g12a_vclk2.hw },
.num_parents = 1,
- .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
+ .flags = CLK_SET_RATE_PARENT,
},
};
@@ -3395,7 +3416,7 @@ static struct clk_regmap g12a_vclk2_div12_en = {
.ops = &clk_regmap_gate_ops,
.parent_hws = (const struct clk_hw *[]) { &g12a_vclk2.hw },
.num_parents = 1,
- .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
+ .flags = CLK_SET_RATE_PARENT,
},
};
@@ -3461,6 +3482,7 @@ static struct clk_fixed_factor g12a_vclk2_div2 = {
&g12a_vclk2_div2_en.hw
},
.num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
},
};
@@ -3474,6 +3496,7 @@ static struct clk_fixed_factor g12a_vclk2_div4 = {
&g12a_vclk2_div4_en.hw
},
.num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
},
};
@@ -3487,6 +3510,7 @@ static struct clk_fixed_factor g12a_vclk2_div6 = {
&g12a_vclk2_div6_en.hw
},
.num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
},
};
@@ -3500,6 +3524,7 @@ static struct clk_fixed_factor g12a_vclk2_div12 = {
&g12a_vclk2_div12_en.hw
},
.num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
},
};
@@ -3561,7 +3586,7 @@ static struct clk_regmap g12a_cts_encl_sel = {
.ops = &clk_regmap_mux_ops,
.parent_hws = g12a_cts_parent_hws,
.num_parents = ARRAY_SIZE(g12a_cts_parent_hws),
- .flags = CLK_SET_RATE_NO_REPARENT | CLK_GET_RATE_NOCACHE,
+ .flags = CLK_SET_RATE_PARENT | CLK_SET_RATE_NO_REPARENT,
},
};
@@ -3717,15 +3742,26 @@ static struct clk_regmap g12a_mipi_dsi_pxclk_sel = {
.ops = &clk_regmap_mux_ops,
.parent_hws = g12a_mipi_dsi_pxclk_parent_hws,
.num_parents = ARRAY_SIZE(g12a_mipi_dsi_pxclk_parent_hws),
- .flags = CLK_SET_RATE_NO_REPARENT,
+ .flags = CLK_SET_RATE_NO_REPARENT | CLK_SET_RATE_PARENT,
},
};
+/*
+ * FIXME: Force as bypass by forcing a single /1 table entry, and doensn't on boot value
+ * when setting a clock whith this node in the clock path, but doesn't garantee the divider
+ * is at /1 at boot until a rate is set.
+ */
+static const struct clk_div_table g12a_mipi_dsi_pxclk_div_table[] = {
+ { .val = 0, .div = 1 },
+ { /* sentinel */ },
+};
+
static struct clk_regmap g12a_mipi_dsi_pxclk_div = {
.data = &(struct clk_regmap_div_data){
.offset = HHI_MIPIDSI_PHY_CLK_CNTL,
.shift = 0,
.width = 7,
+ .table = g12a_mipi_dsi_pxclk_div_table,
},
.hw.init = &(struct clk_init_data){
.name = "mipi_dsi_pxclk_div",
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related
* [PATCH v12 2/7] clk: meson: add vclk driver
From: Neil Armstrong @ 2024-04-03 7:46 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Martin Blumenstingl, Jerome Brunet, Kevin Hilman,
Michael Turquette, Stephen Boyd, Maarten Lankhorst, Maxime Ripard,
Thomas Zimmermann, David Airlie, Daniel Vetter, Jagan Teki,
Nicolas Belin
Cc: devicetree, linux-kernel, linux-amlogic, linux-clk,
linux-arm-kernel, dri-devel, Neil Armstrong
In-Reply-To: <20240403-amlogic-v6-4-upstream-dsi-ccf-vim3-v12-0-99ecdfdc87fc@linaro.org>
The VCLK and VCLK_DIV clocks have supplementary bits.
The VCLK gate has a "SOFT RESET" bit to toggle after the whole
VCLK sub-tree rate has been set, this is implemented in
the gate enable callback.
The VCLK_DIV clocks as enable and reset bits used to disable
and reset the divider, associated with CLK_SET_RATE_GATE it ensures
the rate is set while the divider is disabled and in reset mode.
The VCLK_DIV enable bit isn't implemented as a gate since it's part
of the divider logic and vendor does this exact sequence to ensure
the divider is correctly set.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
drivers/clk/meson/Kconfig | 4 ++
drivers/clk/meson/Makefile | 1 +
drivers/clk/meson/vclk.c | 141 +++++++++++++++++++++++++++++++++++++++++++++
drivers/clk/meson/vclk.h | 51 ++++++++++++++++
4 files changed, 197 insertions(+)
diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig
index 29ffd14d267b..8a9823789fa3 100644
--- a/drivers/clk/meson/Kconfig
+++ b/drivers/clk/meson/Kconfig
@@ -30,6 +30,10 @@ config COMMON_CLK_MESON_VID_PLL_DIV
tristate
select COMMON_CLK_MESON_REGMAP
+config COMMON_CLK_MESON_VCLK
+ tristate
+ select COMMON_CLK_MESON_REGMAP
+
config COMMON_CLK_MESON_CLKC_UTILS
tristate
diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
index 9ee4b954c896..9ba43fe7a07a 100644
--- a/drivers/clk/meson/Makefile
+++ b/drivers/clk/meson/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_COMMON_CLK_MESON_PLL) += clk-pll.o
obj-$(CONFIG_COMMON_CLK_MESON_REGMAP) += clk-regmap.o
obj-$(CONFIG_COMMON_CLK_MESON_SCLK_DIV) += sclk-div.o
obj-$(CONFIG_COMMON_CLK_MESON_VID_PLL_DIV) += vid-pll-div.o
+obj-$(CONFIG_COMMON_CLK_MESON_VCLK) += vclk.o
# Amlogic Clock controllers
diff --git a/drivers/clk/meson/vclk.c b/drivers/clk/meson/vclk.c
new file mode 100644
index 000000000000..45dc216941ea
--- /dev/null
+++ b/drivers/clk/meson/vclk.c
@@ -0,0 +1,141 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2024 Neil Armstrong <neil.armstrong@linaro.org>
+ */
+
+#include <linux/module.h>
+#include "vclk.h"
+
+/* The VCLK gate has a supplementary reset bit to pulse after ungating */
+
+static inline struct meson_vclk_gate_data *
+clk_get_meson_vclk_gate_data(struct clk_regmap *clk)
+{
+ return (struct meson_vclk_gate_data *)clk->data;
+}
+
+static int meson_vclk_gate_enable(struct clk_hw *hw)
+{
+ struct clk_regmap *clk = to_clk_regmap(hw);
+ struct meson_vclk_gate_data *vclk = clk_get_meson_vclk_gate_data(clk);
+
+ meson_parm_write(clk->map, &vclk->enable, 1);
+
+ /* Do a reset pulse */
+ meson_parm_write(clk->map, &vclk->reset, 1);
+ meson_parm_write(clk->map, &vclk->reset, 0);
+
+ return 0;
+}
+
+static void meson_vclk_gate_disable(struct clk_hw *hw)
+{
+ struct clk_regmap *clk = to_clk_regmap(hw);
+ struct meson_vclk_gate_data *vclk = clk_get_meson_vclk_gate_data(clk);
+
+ meson_parm_write(clk->map, &vclk->enable, 0);
+}
+
+static int meson_vclk_gate_is_enabled(struct clk_hw *hw)
+{
+ struct clk_regmap *clk = to_clk_regmap(hw);
+ struct meson_vclk_gate_data *vclk = clk_get_meson_vclk_gate_data(clk);
+
+ return meson_parm_read(clk->map, &vclk->enable);
+}
+
+const struct clk_ops meson_vclk_gate_ops = {
+ .enable = meson_vclk_gate_enable,
+ .disable = meson_vclk_gate_disable,
+ .is_enabled = meson_vclk_gate_is_enabled,
+};
+EXPORT_SYMBOL_GPL(meson_vclk_gate_ops);
+
+/* The VCLK Divider has supplementary reset & enable bits */
+
+static inline struct meson_vclk_div_data *
+clk_get_meson_vclk_div_data(struct clk_regmap *clk)
+{
+ return (struct meson_vclk_div_data *)clk->data;
+}
+
+static unsigned long meson_vclk_div_recalc_rate(struct clk_hw *hw,
+ unsigned long prate)
+{
+ struct clk_regmap *clk = to_clk_regmap(hw);
+ struct meson_vclk_div_data *vclk = clk_get_meson_vclk_div_data(clk);
+
+ return divider_recalc_rate(hw, prate, meson_parm_read(clk->map, &vclk->div),
+ vclk->table, vclk->flags, vclk->div.width);
+}
+
+static int meson_vclk_div_determine_rate(struct clk_hw *hw,
+ struct clk_rate_request *req)
+{
+ struct clk_regmap *clk = to_clk_regmap(hw);
+ struct meson_vclk_div_data *vclk = clk_get_meson_vclk_div_data(clk);
+
+ return divider_determine_rate(hw, req, vclk->table, vclk->div.width,
+ vclk->flags);
+}
+
+static int meson_vclk_div_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_regmap *clk = to_clk_regmap(hw);
+ struct meson_vclk_div_data *vclk = clk_get_meson_vclk_div_data(clk);
+ int ret;
+
+ ret = divider_get_val(rate, parent_rate, vclk->table, vclk->div.width,
+ vclk->flags);
+ if (ret < 0)
+ return ret;
+
+ meson_parm_write(clk->map, &vclk->div, ret);
+
+ return 0;
+};
+
+static int meson_vclk_div_enable(struct clk_hw *hw)
+{
+ struct clk_regmap *clk = to_clk_regmap(hw);
+ struct meson_vclk_div_data *vclk = clk_get_meson_vclk_div_data(clk);
+
+ /* Unreset the divider when ungating */
+ meson_parm_write(clk->map, &vclk->reset, 0);
+ meson_parm_write(clk->map, &vclk->enable, 1);
+
+ return 0;
+}
+
+static void meson_vclk_div_disable(struct clk_hw *hw)
+{
+ struct clk_regmap *clk = to_clk_regmap(hw);
+ struct meson_vclk_div_data *vclk = clk_get_meson_vclk_div_data(clk);
+
+ /* Reset the divider when gating */
+ meson_parm_write(clk->map, &vclk->enable, 0);
+ meson_parm_write(clk->map, &vclk->reset, 1);
+}
+
+static int meson_vclk_div_is_enabled(struct clk_hw *hw)
+{
+ struct clk_regmap *clk = to_clk_regmap(hw);
+ struct meson_vclk_div_data *vclk = clk_get_meson_vclk_div_data(clk);
+
+ return meson_parm_read(clk->map, &vclk->enable);
+}
+
+const struct clk_ops meson_vclk_div_ops = {
+ .recalc_rate = meson_vclk_div_recalc_rate,
+ .determine_rate = meson_vclk_div_determine_rate,
+ .set_rate = meson_vclk_div_set_rate,
+ .enable = meson_vclk_div_enable,
+ .disable = meson_vclk_div_disable,
+ .is_enabled = meson_vclk_div_is_enabled,
+};
+EXPORT_SYMBOL_GPL(meson_vclk_div_ops);
+
+MODULE_DESCRIPTION("Amlogic vclk clock driver");
+MODULE_AUTHOR("Neil Armstrong <neil.armstrong@linaro.org>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/clk/meson/vclk.h b/drivers/clk/meson/vclk.h
new file mode 100644
index 000000000000..20b0b181db09
--- /dev/null
+++ b/drivers/clk/meson/vclk.h
@@ -0,0 +1,51 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2024 Neil Armstrong <neil.armstrong@linaro.org>
+ */
+
+#ifndef __VCLK_H
+#define __VCLK_H
+
+#include "clk-regmap.h"
+#include "parm.h"
+
+/**
+ * struct meson_vclk_gate_data - vclk_gate regmap backed specific data
+ *
+ * @enable: vclk enable field
+ * @reset: vclk reset field
+ * @flags: hardware-specific flags
+ *
+ * Flags:
+ * Same as clk_gate except CLK_GATE_HIWORD_MASK which is ignored
+ */
+struct meson_vclk_gate_data {
+ struct parm enable;
+ struct parm reset;
+ u8 flags;
+};
+
+extern const struct clk_ops meson_vclk_gate_ops;
+
+/**
+ * struct meson_vclk_div_data - vclk_div regmap back specific data
+ *
+ * @div: divider field
+ * @enable: vclk divider enable field
+ * @reset: vclk divider reset field
+ * @table: array of value/divider pairs, last entry should have div = 0
+ *
+ * Flags:
+ * Same as clk_divider except CLK_DIVIDER_HIWORD_MASK which is ignored
+ */
+struct meson_vclk_div_data {
+ struct parm div;
+ struct parm enable;
+ struct parm reset;
+ const struct clk_div_table *table;
+ u8 flags;
+};
+
+extern const struct clk_ops meson_vclk_div_ops;
+
+#endif /* __VCLK_H */
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related
* [PATCH v12 6/7] arm64: meson: khadas-vim3l: add TS050 DSI panel overlay
From: Neil Armstrong @ 2024-04-03 7:46 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Martin Blumenstingl, Jerome Brunet, Kevin Hilman,
Michael Turquette, Stephen Boyd, Maarten Lankhorst, Maxime Ripard,
Thomas Zimmermann, David Airlie, Daniel Vetter, Jagan Teki,
Nicolas Belin
Cc: devicetree, linux-kernel, linux-amlogic, linux-clk,
linux-arm-kernel, dri-devel, Neil Armstrong
In-Reply-To: <20240403-amlogic-v6-4-upstream-dsi-ccf-vim3-v12-0-99ecdfdc87fc@linaro.org>
This add dtbo overlay to support the Khadas TS050 panel on the
Khadas VIM3 & VIM3L boards.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
arch/arm64/boot/dts/amlogic/Makefile | 4 +
.../boot/dts/amlogic/meson-khadas-vim3-ts050.dtso | 108 +++++++++++++++++++++
2 files changed, 112 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index 1ab160bf928a..0b7961de3db7 100644
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -16,6 +16,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-g12a-u200.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-g12a-x96-max.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-g12b-a311d-bananapi-m2s.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-g12b-a311d-khadas-vim3.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-g12b-a311d-khadas-vim3-ts050.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-g12b-bananapi-cm4-cm4io.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gsking-x.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gtking-pro.dtb
@@ -76,6 +77,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-sm1-bananapi-m2-pro.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-sm1-bananapi-m5.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-sm1-h96-max.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-sm1-khadas-vim3l.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-sm1-khadas-vim3l-ts050.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-sm1-s905d3-libretech-cc.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-c4.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-hc4.dtb
@@ -86,3 +88,5 @@ dtb-$(CONFIG_ARCH_MESON) += meson-sm1-x96-air.dtb
# Overlays
meson-g12a-fbx8am-brcm-dtbs := meson-g12a-fbx8am.dtb meson-g12a-fbx8am-brcm.dtbo
meson-g12a-fbx8am-realtek-dtbs := meson-g12a-fbx8am.dtb meson-g12a-fbx8am-realtek.dtbo
+meson-g12b-a311d-khadas-vim3-ts050-dtbs := meson-g12b-a311d-khadas-vim3.dtb meson-khadas-vim3-ts050.dtbo
+meson-sm1-khadas-vim3l-ts050-dtbs := meson-sm1-khadas-vim3l.dtb meson-khadas-vim3-ts050.dtbo
diff --git a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3-ts050.dtso b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3-ts050.dtso
new file mode 100644
index 000000000000..a41b4e619580
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3-ts050.dtso
@@ -0,0 +1,108 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/g12a-clkc.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/amlogic,meson-g12a-gpio-intc.h>
+
+/dts-v1/;
+/plugin/;
+
+/*
+ * Enable Khadas TS050 DSI Panel + Touch Controller
+ * on Khadas VIM3 (A311D) and VIM3L (S905D3)
+ */
+
+&{/} {
+ panel_backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm_AO_cd 0 25000 0>;
+ brightness-levels = <0 255>;
+ num-interpolated-steps = <255>;
+ default-brightness-level = <200>;
+ };
+};
+
+&i2c3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ touch-controller@38 {
+ compatible = "edt,edt-ft5206";
+ reg = <0x38>;
+ interrupt-parent = <&gpio_intc>;
+ interrupts = <IRQID_GPIOA_5 IRQ_TYPE_EDGE_FALLING>;
+ reset-gpios = <&gpio_expander 6 GPIO_ACTIVE_LOW>;
+ touchscreen-size-x = <1080>;
+ touchscreen-size-y = <1920>;
+ status = "okay";
+ };
+};
+
+&mipi_dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ assigned-clocks = <&clkc CLKID_GP0_PLL>,
+ <&clkc CLKID_MIPI_DSI_PXCLK_SEL>,
+ <&clkc CLKID_MIPI_DSI_PXCLK>,
+ <&clkc CLKID_CTS_ENCL_SEL>,
+ <&clkc CLKID_VCLK2_SEL>;
+ assigned-clock-parents = <0>,
+ <&clkc CLKID_GP0_PLL>,
+ <0>,
+ <&clkc CLKID_VCLK2_DIV1>,
+ <&clkc CLKID_GP0_PLL>;
+ assigned-clock-rates = <960000000>,
+ <0>,
+ <960000000>,
+ <0>,
+ <0>;
+
+ panel@0 {
+ compatible = "khadas,ts050";
+ reset-gpios = <&gpio_expander 0 GPIO_ACTIVE_LOW>;
+ enable-gpios = <&gpio_expander 1 GPIO_ACTIVE_HIGH>;
+ power-supply = <&vcc_3v3>;
+ backlight = <&panel_backlight>;
+ reg = <0>;
+
+ port {
+ mipi_in_panel: endpoint {
+ remote-endpoint = <&mipi_out_panel>;
+ };
+ };
+ };
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ mipi_out_panel: endpoint {
+ remote-endpoint = <&mipi_in_panel>;
+ };
+ };
+ };
+};
+
+&mipi_analog_dphy {
+ status = "okay";
+};
+
+&mipi_dphy {
+ status = "okay";
+};
+
+&pwm_AO_cd {
+ pinctrl-0 = <&pwm_ao_c_6_pins>, <&pwm_ao_d_e_pins>;
+};
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related
* [PATCH v12 4/7] drm/meson: gate px_clk when setting rate
From: Neil Armstrong @ 2024-04-03 7:46 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Martin Blumenstingl, Jerome Brunet, Kevin Hilman,
Michael Turquette, Stephen Boyd, Maarten Lankhorst, Maxime Ripard,
Thomas Zimmermann, David Airlie, Daniel Vetter, Jagan Teki,
Nicolas Belin
Cc: devicetree, linux-kernel, linux-amlogic, linux-clk,
linux-arm-kernel, dri-devel, Neil Armstrong
In-Reply-To: <20240403-amlogic-v6-4-upstream-dsi-ccf-vim3-v12-0-99ecdfdc87fc@linaro.org>
Disable the px_clk when setting the rate to recover a fully
configured and correctly reset VCLK clock tree after the rate
is set.
Fixes: 77d9e1e6b846 ("drm/meson: add support for MIPI-DSI transceiver")
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
drivers/gpu/drm/meson/meson_dw_mipi_dsi.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/gpu/drm/meson/meson_dw_mipi_dsi.c b/drivers/gpu/drm/meson/meson_dw_mipi_dsi.c
index a6bc1bdb3d0d..a10cff3ca1fe 100644
--- a/drivers/gpu/drm/meson/meson_dw_mipi_dsi.c
+++ b/drivers/gpu/drm/meson/meson_dw_mipi_dsi.c
@@ -95,6 +95,7 @@ static int dw_mipi_dsi_phy_init(void *priv_data)
return ret;
}
+ clk_disable_unprepare(mipi_dsi->px_clk);
ret = clk_set_rate(mipi_dsi->px_clk, mipi_dsi->mode->clock * 1000);
if (ret) {
@@ -103,6 +104,12 @@ static int dw_mipi_dsi_phy_init(void *priv_data)
return ret;
}
+ ret = clk_prepare_enable(mipi_dsi->px_clk);
+ if (ret) {
+ dev_err(mipi_dsi->dev, "Failed to enable DSI Pixel clock (ret %d)\n", ret);
+ return ret;
+ }
+
switch (mipi_dsi->dsi_device->format) {
case MIPI_DSI_FMT_RGB888:
dpi_data_format = DPI_COLOR_24BIT;
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related
* [PATCH v12 5/7] arm64: meson: g12-common: add the MIPI DSI nodes
From: Neil Armstrong @ 2024-04-03 7:46 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Martin Blumenstingl, Jerome Brunet, Kevin Hilman,
Michael Turquette, Stephen Boyd, Maarten Lankhorst, Maxime Ripard,
Thomas Zimmermann, David Airlie, Daniel Vetter, Jagan Teki,
Nicolas Belin
Cc: devicetree, linux-kernel, linux-amlogic, linux-clk,
linux-arm-kernel, dri-devel, Neil Armstrong
In-Reply-To: <20240403-amlogic-v6-4-upstream-dsi-ccf-vim3-v12-0-99ecdfdc87fc@linaro.org>
Add the MIPI DSI Analog & Digital PHY nodes and the DSI control
nodes with proper port endpoint to the VPU.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi | 70 +++++++++++++++++++++++
1 file changed, 70 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
index 9d5eab6595d0..b058ed78faf0 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
@@ -1663,9 +1663,28 @@ pwrc: power-controller {
<250000000>,
<0>; /* Do Nothing */
};
+
+ mipi_analog_dphy: phy {
+ compatible = "amlogic,g12a-mipi-dphy-analog";
+ #phy-cells = <0>;
+ status = "disabled";
+ };
};
};
+ mipi_dphy: phy@44000 {
+ compatible = "amlogic,axg-mipi-dphy";
+ reg = <0x0 0x44000 0x0 0x2000>;
+ clocks = <&clkc CLKID_MIPI_DSI_PHY>;
+ clock-names = "pclk";
+ resets = <&reset RESET_MIPI_DSI_PHY>;
+ reset-names = "phy";
+ phys = <&mipi_analog_dphy>;
+ phy-names = "analog";
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
usb3_pcie_phy: phy@46000 {
compatible = "amlogic,g12a-usb3-pcie-phy";
reg = <0x0 0x46000 0x0 0x2000>;
@@ -2152,6 +2171,15 @@ hdmi_tx_out: endpoint {
remote-endpoint = <&hdmi_tx_in>;
};
};
+
+ /* DPI output port */
+ dpi_port: port@2 {
+ reg = <2>;
+
+ dpi_out: endpoint {
+ remote-endpoint = <&mipi_dsi_in>;
+ };
+ };
};
gic: interrupt-controller@ffc01000 {
@@ -2189,6 +2217,48 @@ gpio_intc: interrupt-controller@f080 {
amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>;
};
+ mipi_dsi: dsi@7000 {
+ compatible = "amlogic,meson-g12a-dw-mipi-dsi";
+ reg = <0x0 0x7000 0x0 0x1000>;
+ resets = <&reset RESET_MIPI_DSI_HOST>;
+ reset-names = "top";
+ clocks = <&clkc CLKID_MIPI_DSI_HOST>,
+ <&clkc CLKID_MIPI_DSI_PXCLK>,
+ <&clkc CLKID_CTS_ENCL>;
+ clock-names = "pclk", "bit", "px";
+ phys = <&mipi_dphy>;
+ phy-names = "dphy";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ assigned-clocks = <&clkc CLKID_MIPI_DSI_PXCLK_SEL>,
+ <&clkc CLKID_CTS_ENCL_SEL>,
+ <&clkc CLKID_VCLK2_SEL>;
+ assigned-clock-parents = <&clkc CLKID_GP0_PLL>,
+ <&clkc CLKID_VCLK2_DIV1>,
+ <&clkc CLKID_GP0_PLL>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* VPU VENC Input */
+ mipi_dsi_venc_port: port@0 {
+ reg = <0>;
+
+ mipi_dsi_in: endpoint {
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+
+ /* DSI Output */
+ mipi_dsi_panel_port: port@1 {
+ reg = <1>;
+ };
+ };
+ };
+
watchdog: watchdog@f0d0 {
compatible = "amlogic,meson-gxbb-wdt";
reg = <0x0 0xf0d0 0x0 0x10>;
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related
* [PATCH v12 7/7] arm64: dts: amlogic: meson-g12b-bananapi-cm4: add support for MNT Reform2 with CM4 adaper
From: Neil Armstrong @ 2024-04-03 7:46 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Martin Blumenstingl, Jerome Brunet, Kevin Hilman,
Michael Turquette, Stephen Boyd, Maarten Lankhorst, Maxime Ripard,
Thomas Zimmermann, David Airlie, Daniel Vetter, Jagan Teki,
Nicolas Belin
Cc: devicetree, linux-kernel, linux-amlogic, linux-clk,
linux-arm-kernel, dri-devel, Neil Armstrong, Lukas F. Hartmann
In-Reply-To: <20240403-amlogic-v6-4-upstream-dsi-ccf-vim3-v12-0-99ecdfdc87fc@linaro.org>
This adds a basic devicetree for the MNT Reform2 DIY laptop when using a
CM4 adapter and a BPI-CM4 module.
Co-developed-by: Lukas F. Hartmann <lukas@mntre.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
arch/arm64/boot/dts/amlogic/Makefile | 1 +
.../meson-g12b-bananapi-cm4-mnt-reform2.dts | 384 +++++++++++++++++++++
2 files changed, 385 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index 0b7961de3db7..d525e5123fbc 100644
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -18,6 +18,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-g12b-a311d-bananapi-m2s.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-g12b-a311d-khadas-vim3.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-g12b-a311d-khadas-vim3-ts050.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-g12b-bananapi-cm4-cm4io.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-g12b-bananapi-cm4-mnt-reform2.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gsking-x.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gtking-pro.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gtking.dtb
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-mnt-reform2.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-mnt-reform2.dts
new file mode 100644
index 000000000000..003efed529ba
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-mnt-reform2.dts
@@ -0,0 +1,384 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2023 Neil Armstrong <neil.armstrong@linaro.org>
+ * Copyright 2023 MNT Research GmbH
+ */
+
+/dts-v1/;
+
+#include "meson-g12b-bananapi-cm4.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+ model = "MNT Reform 2 with BPI-CM4 Module";
+ compatible = "mntre,reform2-cm4", "bananapi,bpi-cm4", "amlogic,a311d", "amlogic,g12b";
+ chassis-type = "laptop";
+
+ aliases {
+ ethernet0 = ðmac;
+ i2c0 = &i2c1;
+ i2c1 = &i2c3;
+ };
+
+ hdmi_connector: hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&hdmi_tx_tmds_out>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-blue {
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_STATUS;
+ gpios = <&gpio_ao GPIOAO_7 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ led-green {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_STATUS;
+ gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ sound {
+ compatible = "amlogic,axg-sound-card";
+ model = "MNT-REFORM2-BPI-CM4";
+ audio-widgets = "Headphone", "Headphone Jack",
+ "Speaker", "External Speaker",
+ "Microphone", "Mic Jack";
+ audio-aux-devs = <&tdmout_a>, <&tdmout_b>, <&tdmin_b>;
+ audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0",
+ "TDMOUT_A IN 1", "FRDDR_B OUT 0",
+ "TDMOUT_A IN 2", "FRDDR_C OUT 0",
+ "TDM_A Playback", "TDMOUT_A OUT",
+ "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+ "TDMOUT_B IN 1", "FRDDR_B OUT 1",
+ "TDMOUT_B IN 2", "FRDDR_C OUT 1",
+ "TDM_B Playback", "TDMOUT_B OUT",
+ "TDMIN_B IN 1", "TDM_B Capture",
+ "TDMIN_B IN 4", "TDM_B Loopback",
+ "TODDR_A IN 1", "TDMIN_B OUT",
+ "TODDR_B IN 1", "TDMIN_B OUT",
+ "TODDR_C IN 1", "TDMIN_B OUT",
+ "Headphone Jack", "HP_L",
+ "Headphone Jack", "HP_R",
+ "External Speaker", "SPK_LP",
+ "External Speaker", "SPK_LN",
+ "External Speaker", "SPK_RP",
+ "External Speaker", "SPK_RN",
+ "LINPUT1", "Mic Jack",
+ "Mic Jack", "MICB";
+
+ assigned-clocks = <&clkc CLKID_MPLL2>,
+ <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>;
+ assigned-clock-parents = <0>, <0>, <0>;
+ assigned-clock-rates = <294912000>,
+ <270950400>,
+ <393216000>;
+
+ dai-link-0 {
+ sound-dai = <&frddr_a>;
+ };
+
+ dai-link-1 {
+ sound-dai = <&frddr_b>;
+ };
+
+ dai-link-2 {
+ sound-dai = <&frddr_c>;
+ };
+
+ dai-link-3 {
+ sound-dai = <&toddr_a>;
+ };
+
+ dai-link-4 {
+ sound-dai = <&toddr_b>;
+ };
+
+ dai-link-5 {
+ sound-dai = <&toddr_c>;
+ };
+
+ /* 8ch hdmi interface */
+ dai-link-6 {
+ sound-dai = <&tdmif_a>;
+ dai-format = "i2s";
+ dai-tdm-slot-tx-mask-0 = <1 1>;
+ dai-tdm-slot-tx-mask-1 = <1 1>;
+ dai-tdm-slot-tx-mask-2 = <1 1>;
+ dai-tdm-slot-tx-mask-3 = <1 1>;
+ mclk-fs = <256>;
+
+ codec {
+ sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>;
+ };
+ };
+
+ /* Analog Audio */
+ dai-link-7 {
+ sound-dai = <&tdmif_b>;
+ dai-format = "i2s";
+ dai-tdm-slot-tx-mask-0 = <1 1>;
+ mclk-fs = <256>;
+
+ codec {
+ sound-dai = <&wm8960>;
+ };
+ };
+
+ /* hdmi glue */
+ dai-link-8 {
+ sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+ codec {
+ sound-dai = <&hdmi_tx>;
+ };
+ };
+ };
+
+ reg_main_1v8: regulator-main-1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <®_main_3v3>;
+ };
+
+ reg_main_1v2: regulator-main-1v2 {
+ compatible = "regulator-fixed";
+ regulator-name = "1V2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ vin-supply = <®_main_5v>;
+ };
+
+ reg_main_3v3: regulator-main-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ reg_main_5v: regulator-main-5v {
+ compatible = "regulator-fixed";
+ regulator-name = "5V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ reg_main_usb: regulator-main-usb {
+ compatible = "regulator-fixed";
+ regulator-name = "USB_PWR";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <®_main_5v>;
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm_AO_ab 0 10000 0>;
+ power-supply = <®_main_usb>;
+ enable-gpios = <&gpio 58 GPIO_ACTIVE_HIGH>;
+ brightness-levels = <0 32 64 128 160 200 255>;
+ default-brightness-level = <6>;
+ };
+
+ panel {
+ compatible = "innolux,n125hce-gn1";
+ power-supply = <®_main_3v3>;
+ backlight = <&backlight>;
+ no-hpd;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&edp_bridge_out>;
+ };
+ };
+ };
+
+ clock_12288: clock_12288 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <12288000>;
+ };
+};
+
+&mipi_analog_dphy {
+ status = "okay";
+};
+
+&mipi_dphy {
+ status = "okay";
+};
+
+&mipi_dsi {
+ status = "okay";
+
+ assigned-clocks = <&clkc CLKID_GP0_PLL>,
+ <&clkc CLKID_MIPI_DSI_PXCLK_SEL>,
+ <&clkc CLKID_MIPI_DSI_PXCLK>,
+ <&clkc CLKID_CTS_ENCL_SEL>,
+ <&clkc CLKID_VCLK2_SEL>;
+ assigned-clock-parents = <0>,
+ <&clkc CLKID_GP0_PLL>,
+ <0>,
+ <&clkc CLKID_VCLK2_DIV1>,
+ <&clkc CLKID_GP0_PLL>;
+ assigned-clock-rates = <936000000>,
+ <0>,
+ <936000000>,
+ <0>,
+ <0>;
+};
+
+&mipi_dsi_panel_port {
+ mipi_dsi_out: endpoint {
+ remote-endpoint = <&edp_bridge_in>;
+ };
+};
+
+&cecb_AO {
+ status = "okay";
+};
+
+ðmac {
+ status = "okay";
+};
+
+&hdmi_tx {
+ status = "okay";
+};
+
+&hdmi_tx_tmds_port {
+ hdmi_tx_tmds_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+};
+
+&pwm_AO_ab {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm_ao_a_pins>;
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+};
+
+&i2c3 {
+ status = "okay";
+
+ edp_bridge: bridge@2c {
+ compatible = "ti,sn65dsi86";
+ reg = <0x2c>;
+ enable-gpios = <&gpio GPIOX_10 GPIO_ACTIVE_HIGH>; // PIN_24 / GPIO8
+ vccio-supply = <®_main_1v8>;
+ vpll-supply = <®_main_1v8>;
+ vcca-supply = <®_main_1v2>;
+ vcc-supply = <®_main_1v2>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ edp_bridge_in: endpoint {
+ remote-endpoint = <&mipi_dsi_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ edp_bridge_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
+ };
+};
+
+&i2c2 {
+ status = "okay";
+
+ wm8960: codec@1a {
+ compatible = "wlf,wm8960";
+ reg = <0x1a>;
+ clocks = <&clock_12288>;
+ clock-names = "mclk";
+ #sound-dai-cells = <0>;
+ wlf,shared-lrclk;
+ };
+
+ rtc@68 {
+ compatible = "nxp,pcf8523";
+ reg = <0x68>;
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&sd_emmc_b {
+ status = "okay";
+};
+
+&tdmif_a {
+ status = "okay";
+};
+
+&tdmout_a {
+ status = "okay";
+};
+
+&tdmif_b {
+ pinctrl-0 = <&tdm_b_dout0_pins>, <&tdm_b_fs_pins>, <&tdm_b_sclk_pins>, <&tdm_b_din1_pins>;
+ pinctrl-names = "default";
+
+ assigned-clocks = <&clkc_audio AUD_CLKID_TDM_SCLK_PAD1>,
+ <&clkc_audio AUD_CLKID_TDM_LRCLK_PAD1>;
+ assigned-clock-parents = <&clkc_audio AUD_CLKID_MST_B_SCLK>,
+ <&clkc_audio AUD_CLKID_MST_B_LRCLK>;
+ assigned-clock-rates = <0>, <0>;
+};
+
+&tdmin_b {
+ status = "okay";
+};
+
+&toddr_a {
+ status = "okay";
+};
+
+&toddr_b {
+ status = "okay";
+};
+
+&toddr_c {
+ status = "okay";
+};
+
+&tohdmitx {
+ status = "okay";
+};
+
+&usb {
+ dr_mode = "host";
+
+ status = "okay";
+};
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related
* Re: [PATCH v2 05/18] PCI: endpoint: test: Synchronously cancel command handler work
From: Manivannan Sadhasivam @ 2024-04-03 7:47 UTC (permalink / raw)
To: Damien Le Moal
Cc: Lorenzo Pieralisi, Kishon Vijay Abraham I, Shawn Lin,
Krzysztof Wilczyński, Bjorn Helgaas, Heiko Stuebner,
linux-pci, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
devicetree, linux-rockchip, linux-arm-kernel, Rick Wertenbroek,
Wilfred Mallawa, Niklas Cassel
In-Reply-To: <20240330041928.1555578-6-dlemoal@kernel.org>
On Sat, Mar 30, 2024 at 01:19:15PM +0900, Damien Le Moal wrote:
> Replace the call to cancel_delayed_work() with a call to
> cancel_delayed_work_sync() in pci_epf_test_unbind(). This ensures that
> the command handler is really stopped when proceeding with dma and bar
> cleanup.
>
> Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
- Mani
> Reviewed-by: Frank Li <Frank.Li@nxp.com>
> ---
> drivers/pci/endpoint/functions/pci-epf-test.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/pci/endpoint/functions/pci-epf-test.c b/drivers/pci/endpoint/functions/pci-epf-test.c
> index 0e285e539538..ab40c3182677 100644
> --- a/drivers/pci/endpoint/functions/pci-epf-test.c
> +++ b/drivers/pci/endpoint/functions/pci-epf-test.c
> @@ -709,7 +709,7 @@ static void pci_epf_test_unbind(struct pci_epf *epf)
> struct pci_epf_bar *epf_bar;
> int bar;
>
> - cancel_delayed_work(&epf_test->cmd_handler);
> + cancel_delayed_work_sync(&epf_test->cmd_handler);
> pci_epf_test_clean_dma_chan(epf_test);
> for (bar = 0; bar < PCI_STD_NUM_BARS; bar++) {
> epf_bar = &epf->bar[bar];
> --
> 2.44.0
>
--
மணிவண்ணன் சதாசிவம்
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply
* Re: [PATCH v9 00/13] firmware: qcom: qseecom: convert to using the TZ allocator
From: Bartosz Golaszewski @ 2024-04-03 7:47 UTC (permalink / raw)
To: Maximilian Luz
Cc: Andy Gross, Bjorn Andersson, Konrad Dybcio, Elliot Berman,
Krzysztof Kozlowski, Guru Das Srinagesh, Andrew Halaney,
Alex Elder, Srini Kandagatla, Arnd Bergmann, linux-arm-msm,
linux-kernel, linux-arm-kernel, kernel, Bartosz Golaszewski
In-Reply-To: <CAMRc=Me0MamtJoPtQnucKyZx9pfkEPDAAZqWFWRU0CBcj+P50A@mail.gmail.com>
On Tue, Apr 2, 2024 at 10:44 AM Bartosz Golaszewski <brgl@bgdev.pl> wrote:
>
> On Sat, Mar 30, 2024 at 8:16 PM Bartosz Golaszewski <brgl@bgdev.pl> wrote:
> >
> > On Fri, 29 Mar 2024 20:57:52 +0100, Maximilian Luz <luzmaximilian@gmail.com> said:
> > > On 3/29/24 8:46 PM, Bartosz Golaszewski wrote:
> > >> On Fri, 29 Mar 2024 at 20:39, Maximilian Luz <luzmaximilian@gmail.com> wrote:
> > >>>
> > >>> On 3/29/24 8:26 PM, Bartosz Golaszewski wrote:
> > >>>> On Fri, 29 Mar 2024 at 20:22, Maximilian Luz <luzmaximilian@gmail.com> wrote:
> > >>>>>
> > >>>>> On 3/29/24 8:07 PM, Bartosz Golaszewski wrote:
> > >>>>>>
> > >>>>>> Both with and without SHM bridge?
> > >>>>>
> > >>>>> With CONFIG_QCOM_TZMEM_MODE_GENERIC=y (and the upcoming fix) everything
> > >>>>> works. With CONFIG_QCOM_TZMEM_MODE_SHMBRIDGE=y things unfortunately
> > >>>>> still get stuck at boot (regardless of the fix). I think that's
> > >>>>> happening even before anything efivar related should come up.
> > >>>>>
> > >>>>
> > >>>> This is on X13s? I will get one in 3 weeks. Can you get the bootlog
> > >>>> somehow? Does the laptop have any serial console?
> > >>>
> > >>> Surface Pro X (sc8180x), but it should be similar enough to the X13s in
> > >>> that regard. At least from what people with access to the X13s told me,
> > >>> the qseecom stuff seems to behave the same.
> > >>>
> > >>> Unfortunately I don't have a direct serial console. Best I have is
> > >>> USB-serial, but it's not even getting there. I'll have to try and see if
> > >>> I can get some more info on the screen.
> > >>>
> > >>
> > >> I have access to a sc8180x-primus board, does it make sense to test
> > >> with this one? If so, could you give me instructions on how to do it?
> > >
> > > I guess it's worth a shot.
> > >
> > > From what I can tell, there shouldn't be any patches in my tree that
> > > would conflict with it. So I guess it should just be building it with
> > > CONFIG_QCOM_TZMEM_MODE_SHMBRIDGE=y and booting.
> > >
> > > I am currently testing it on top of a patched v6.8 tree though (but that
> > > should just contain patches to get the Pro X running). You can find the
> > > full tree at
> > >
> > > https://github.com/linux-surface/kernel/tree/spx/v6.8
> > >
> > > The last commit is the fix I mentioned, so you might want to revert
> > > that, since the shmem issue triggers regardless of that and it prevents
> > > your series from applying cleanly.
> > >
> > > Best regards,
> > > Max
> > >
> >
> > sc8180x-primus' support upstream is quite flaky. The board boots 50% of time.
> > However it's true that with SHM bridge it gets to:
> >
> > mount: mounting efivarfs on /sys/firmware/efi/efivars failed: Operation not supported
> >
> > and stops 100% of the time. Without SHM bridge I cannot boot it either because
> > I suppose I need the patch you sent yesterday. I haven't had the time to
> > rebase it yet, it's quite intrusive to my series.
> >
> > I can confirm that with that patch the board still boots but still 50% of the
> > time.
> >
> > Bart
>
> Hi!
>
> I was under the impression that until v8, the series worked on sc8180x
> but I'm seeing that even v7 has the same issue with SHM Bridge on
> sc8180x-primus. Could you confirm? Because I'm not sure if I should
> track the differences or the whole thing was broken for this platform
> from the beginning.
>
> Bart
Interestingly, it doesn't seem like a problem with qseecom - even if I
disable the driver, the board still freezes after the first SCM call
using SHM bridge. I suspect - and am trying to clarify that with qcom
- that this architecture doesn't support SHM bridge but doesn't report
it either unlike other older platforms. Or maybe there's some quirk
somewhere. Anyway, I'm on it.
Bart
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply
* Re: [PATCH v2 06/18] PCI: endpoint: test: Implement link_down event operation
From: Manivannan Sadhasivam @ 2024-04-03 7:48 UTC (permalink / raw)
To: Damien Le Moal
Cc: Lorenzo Pieralisi, Kishon Vijay Abraham I, Shawn Lin,
Krzysztof Wilczyński, Bjorn Helgaas, Heiko Stuebner,
linux-pci, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
devicetree, linux-rockchip, linux-arm-kernel, Rick Wertenbroek,
Wilfred Mallawa, Niklas Cassel
In-Reply-To: <20240330041928.1555578-7-dlemoal@kernel.org>
On Sat, Mar 30, 2024 at 01:19:16PM +0900, Damien Le Moal wrote:
> Implement the link_down event operation to stop the command execution
> delayed work when the endpoint controller notifies a link down event.
>
> Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
This patch is already part of another series I posted [1] and under review. So
this can be dropped.
- Mani
[1] https://lore.kernel.org/linux-pci/20240401-pci-epf-rework-v2-9-970dbe90b99d@linaro.org/
> Reviewed-by: Frank Li <Frank.Li@nxp.com>
> ---
> drivers/pci/endpoint/functions/pci-epf-test.c | 10 ++++++++++
> 1 file changed, 10 insertions(+)
>
> diff --git a/drivers/pci/endpoint/functions/pci-epf-test.c b/drivers/pci/endpoint/functions/pci-epf-test.c
> index ab40c3182677..e6d4e1747c9f 100644
> --- a/drivers/pci/endpoint/functions/pci-epf-test.c
> +++ b/drivers/pci/endpoint/functions/pci-epf-test.c
> @@ -824,9 +824,19 @@ static int pci_epf_test_link_up(struct pci_epf *epf)
> return 0;
> }
>
> +static int pci_epf_test_link_down(struct pci_epf *epf)
> +{
> + struct pci_epf_test *epf_test = epf_get_drvdata(epf);
> +
> + cancel_delayed_work_sync(&epf_test->cmd_handler);
> +
> + return 0;
> +}
> +
> static const struct pci_epc_event_ops pci_epf_test_event_ops = {
> .core_init = pci_epf_test_core_init,
> .link_up = pci_epf_test_link_up,
> + .link_down = pci_epf_test_link_down,
> };
>
> static int pci_epf_test_alloc_space(struct pci_epf *epf)
> --
> 2.44.0
>
--
மணிவண்ணன் சதாசிவம்
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply
* Re: [PATCH v2 00/18] Improve PCI memory mapping API
From: Manivannan Sadhasivam @ 2024-04-03 7:50 UTC (permalink / raw)
To: Damien Le Moal
Cc: Lorenzo Pieralisi, Kishon Vijay Abraham I, Shawn Lin,
Krzysztof Wilczyński, Bjorn Helgaas, Heiko Stuebner,
linux-pci, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
devicetree, linux-rockchip, linux-arm-kernel, Rick Wertenbroek,
Wilfred Mallawa, Niklas Cassel
In-Reply-To: <20240330041928.1555578-1-dlemoal@kernel.org>
On Sat, Mar 30, 2024 at 01:19:10PM +0900, Damien Le Moal wrote:
> This series introduces the new functions pci_epc_map_align(),
> pci_epc_mem_map() and pci_epc_mem_unmap() to improve handling of the
> PCI address mapping alignment constraints of endpoint controllers in a
> controller independent manner.
>
> The issue fixed is that the fixed alignment defined by the "align" field
> of struct pci_epc_features assumes that the alignment of the endpoint
> memory used to map a RC PCI address range is independent of the PCI
> address being mapped. But that is not the case for the rk3399 SoC
> controller: in endpoint mode, this controller uses the lower bits of the
> local endpoint memory address as the lower bits for the PCI addresses
> for data transfers. That is, when mapping local memory, one must take
> into account the number of bits of the RC PCI address that change from
> the start address of the mapping.
>
> To fix this, the new endpoint controller method .map_align is introduced
> and called from pci_epc_map_align(). This method is optional and for
> controllers that do not define it, the mapping information returned
> is based of the fixed alignment constraint as defined by the align
> feature.
>
> The functions pci_epc_mem_map() is a helper function which obtains
> mapping information, allocates endpoint controller memory according to
> the mapping size obtained and maps the memory. pci_epc_mem_map() unmaps
> and frees the endpoint memory.
>
> This series is organized as follows:
> - Patch 1 tidy up the epc core code
> - Patch 2 and 3 introduce the new map_align endpoint controller method
> and related epc functions.
> - Patch 4 to 6 modify the test endpoint driver to use these new
> functions and improve the code of this driver.
While posting the next version, please split the endpoint patches into a
separate series. It helps in code review and can be applied separately.
- Mani
> - Finally, Patch 7 to 18 fix the rk3399 endpoint driver, defining a
> .map_align method for it and improving its overall code readability
> and features.
>
> Changes from v1:
> - Changed pci_epc_check_func() to pci_epc_function_is_valid() in patch
> 1.
> - Removed patch "PCI: endpoint: Improve pci_epc_mem_alloc_addr()"
> (former patch 2 of v1)
> - Various typos cleanups all over. Also fixed some blank space
> indentation.
> - Added review tags
>
> Damien Le Moal (17):
> PCI: endpoint: Introduce pci_epc_function_is_valid()
> PCI: endpoint: Introduce pci_epc_map_align()
> PCI: endpoint: Introduce pci_epc_mem_map()/unmap()
> PCI: endpoint: test: Use pci_epc_mem_map/unmap()
> PCI: endpoint: test: Synchronously cancel command handler work
> PCI: endpoint: test: Implement link_down event operation
> PCI: rockchip-ep: Fix address translation unit programming
> PCI: rockchip-ep: Use a macro to define EP controller .align feature
> PCI: rockchip-ep: Improve rockchip_pcie_ep_unmap_addr()
> PCI: rockchip-ep: Improve rockchip_pcie_ep_map_addr()
> PCI: rockchip-ep: Implement the map_align endpoint controller operation
> PCI: rockchip-ep: Refactor rockchip_pcie_ep_probe() memory allocations
> PCI: rockchip-ep: Refactor rockchip_pcie_ep_probe() MSI-X hiding
> PCI: rockchip-ep: Refactor endpoint link training enable
> PCI: rockship-ep: Introduce rockchip_pcie_ep_stop()
> PCI: rockchip-ep: Improve link training
> PCI: rockchip-ep: Handle PERST# signal in endpoint mode
>
> Wilfred Mallawa (1):
> dt-bindings: pci: rockchip,rk3399-pcie-ep: Add ep-gpios property
>
> .../bindings/pci/rockchip,rk3399-pcie-ep.yaml | 3 +
> drivers/pci/controller/pcie-rockchip-ep.c | 393 ++++++++++++++----
> drivers/pci/controller/pcie-rockchip.c | 17 +-
> drivers/pci/controller/pcie-rockchip.h | 22 +
> drivers/pci/endpoint/functions/pci-epf-test.c | 390 +++++++++--------
> drivers/pci/endpoint/pci-epc-core.c | 213 +++++++---
> include/linux/pci-epc.h | 39 ++
> 7 files changed, 768 insertions(+), 309 deletions(-)
>
> --
> 2.44.0
>
--
மணிவண்ணன் சதாசிவம்
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply
* Re: [PATCH v2 02/18] PCI: endpoint: Introduce pci_epc_map_align()
From: Damien Le Moal @ 2024-04-03 7:54 UTC (permalink / raw)
To: Manivannan Sadhasivam
Cc: Lorenzo Pieralisi, Kishon Vijay Abraham I, Shawn Lin,
Krzysztof Wilczyński, Bjorn Helgaas, Heiko Stuebner,
linux-pci, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
devicetree, linux-rockchip, linux-arm-kernel, Rick Wertenbroek,
Wilfred Mallawa, Niklas Cassel
In-Reply-To: <20240403074520.GC25309@thinkpad>
On 4/3/24 16:45, Manivannan Sadhasivam wrote:
> On Sat, Mar 30, 2024 at 01:19:12PM +0900, Damien Le Moal wrote:
>> Some endpoint controllers have requirements on the alignment of the
>> controller physical memory address that must be used to map a RC PCI
>> address region. For instance, the rockchip endpoint controller uses
>> at most the lower 20 bits of a physical memory address region as the
>> lower bits of an RC PCI address. For mapping a PCI address region of
>> size bytes starting from pci_addr, the exact number of address bits
>> used is the number of address bits changing in the address range
>> [pci_addr..pci_addr + size - 1].
>>
>> For this example, this creates the following constraints:
>> 1) The offset into the controller physical memory allocated for a
>> mapping depends on the mapping size *and* the starting PCI address
>> for the mapping.
>> 2) A mapping size cannot exceed the controller windows size (1MB) minus
>> the offset needed into the allocated physical memory, which can end
>> up being a smaller size than the desired mapping size.
>>
>> Handling these constraints independently of the controller being used in
>> a PCI EP function driver is not possible with the current EPC API as
>> it only provides the ->align field in struct pci_epc_features.
>> Furthermore, this alignment is static and does not depend on a mapping
>> pci address and size.
>>
>> Solve this by introducing the function pci_epc_map_align() and the
>> endpoint controller operation ->map_align to allow endpoint function
>> drivers to obtain the size and the offset into a controller address
>> region that must be used to map an RC PCI address region. The size
>> of the physical address region provided by pci_epc_map_align() can then
>> be used as the size argument for the function pci_epc_mem_alloc_addr().
>> The offset into the allocated controller memory can be used to
>> correctly handle data transfers. Of note is that pci_epc_map_align() may
>> indicate upon return a mapping size that is smaller (but not 0) than the
>> requested PCI address region size. For such case, an endpoint function
>> driver must handle data transfers in fragments.
>>
>
> Is there any incentive in exposing pci_epc_map_align()? I mean, why can't it be
> hidden inside the new alloc() API itself?
I could drop pci_epc_map_align(), but the idea here was to have an API that is
not restrictive. E.g., a function driver could allocate memory, keep it and
repetedly use map_align and map() function to remap it to different PCI
addresses. With your suggestion, that would not be possible.
>
> Furthermore, is it possible to avoid the map_align() callback and handle the
> alignment within the EPC driver?
I am not so sure that this is possible because handling the alignment can
potentially result in changing the amount of memory to allocate, based on the
PCI address also. So the allocation API would need to change, a lot.
>> + /*
>> + * Assume a fixed alignment constraint as specified by the controller
>> + * features.
>> + */
>> + features = pci_epc_get_features(epc, func_no, vfunc_no);
>> + if (!features || !features->align) {
>> + map->map_pci_addr = pci_addr;
>> + map->map_size = size;
>> + map->map_ofst = 0;
>
> These values are overwritten anyway below.
Looks like "return" got dropped. Bug. Will re-add it.
--
Damien Le Moal
Western Digital Research
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply
* Re: [PATCH 7/7] x86: mm: accelerate pagefault when badaccess
From: Kefeng Wang @ 2024-04-03 7:58 UTC (permalink / raw)
To: Suren Baghdasaryan
Cc: akpm, Russell King, Catalin Marinas, Will Deacon,
Michael Ellerman, Nicholas Piggin, Christophe Leroy,
Paul Walmsley, Palmer Dabbelt, Albert Ou, Alexander Gordeev,
Gerald Schaefer, Dave Hansen, Andy Lutomirski, Peter Zijlstra,
x86, linux-arm-kernel, linuxppc-dev, linux-riscv, linux-s390
In-Reply-To: <CAJuCfpFoxP78+P1+4WQcCqMzGv7jpC9V8pR_-R8t8zPUg-t+aA@mail.gmail.com>
On 2024/4/3 13:59, Suren Baghdasaryan wrote:
> On Tue, Apr 2, 2024 at 12:53 AM Kefeng Wang <wangkefeng.wang@huawei.com> wrote:
>>
>> The vm_flags of vma already checked under per-VMA lock, if it is a
>> bad access, directly handle error and return, there is no need to
>> lock_mm_and_find_vma() and check vm_flags again.
>>
>> Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
>
> Looks safe to me.
> Using (mm != NULL) to indicate that we are holding mmap_lock is not
> ideal but I guess that works.
>
Yes, I will add this part it into change too,
The access_error() of vma already checked under per-VMA lock, if it
is a bad access, directly handle error, no need to retry with mmap_lock
again. In order to release the correct lock, pass the mm_struct into
bad_area_access_error(), if mm is NULL, release vma lock, or release
mmap_lock. Since the page faut is handled under per-VMA lock, count it
as a vma lock event with VMA_LOCK_SUCCESS.
Thanks.
> Reviewed-by: Suren Baghdasaryan <surenb@google.com>
>
>> ---
>> arch/x86/mm/fault.c | 23 ++++++++++++++---------
>> 1 file changed, 14 insertions(+), 9 deletions(-)
>>
>> diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c
>> index a4cc20d0036d..67b18adc75dd 100644
>> --- a/arch/x86/mm/fault.c
>> +++ b/arch/x86/mm/fault.c
>> @@ -866,14 +866,17 @@ bad_area_nosemaphore(struct pt_regs *regs, unsigned long error_code,
>>
>> static void
>> __bad_area(struct pt_regs *regs, unsigned long error_code,
>> - unsigned long address, u32 pkey, int si_code)
>> + unsigned long address, struct mm_struct *mm,
>> + struct vm_area_struct *vma, u32 pkey, int si_code)
>> {
>> - struct mm_struct *mm = current->mm;
>> /*
>> * Something tried to access memory that isn't in our memory map..
>> * Fix it, but check if it's kernel or user first..
>> */
>> - mmap_read_unlock(mm);
>> + if (mm)
>> + mmap_read_unlock(mm);
>> + else
>> + vma_end_read(vma);
>>
>> __bad_area_nosemaphore(regs, error_code, address, pkey, si_code);
>> }
>> @@ -897,7 +900,8 @@ static inline bool bad_area_access_from_pkeys(unsigned long error_code,
>>
>> static noinline void
>> bad_area_access_error(struct pt_regs *regs, unsigned long error_code,
>> - unsigned long address, struct vm_area_struct *vma)
>> + unsigned long address, struct mm_struct *mm,
>> + struct vm_area_struct *vma)
>> {
>> /*
>> * This OSPKE check is not strictly necessary at runtime.
>> @@ -927,9 +931,9 @@ bad_area_access_error(struct pt_regs *regs, unsigned long error_code,
>> */
>> u32 pkey = vma_pkey(vma);
>>
>> - __bad_area(regs, error_code, address, pkey, SEGV_PKUERR);
>> + __bad_area(regs, error_code, address, mm, vma, pkey, SEGV_PKUERR);
>> } else {
>> - __bad_area(regs, error_code, address, 0, SEGV_ACCERR);
>> + __bad_area(regs, error_code, address, mm, vma, 0, SEGV_ACCERR);
>> }
>> }
>>
>> @@ -1357,8 +1361,9 @@ void do_user_addr_fault(struct pt_regs *regs,
>> goto lock_mmap;
>>
>> if (unlikely(access_error(error_code, vma))) {
>> - vma_end_read(vma);
>> - goto lock_mmap;
>> + bad_area_access_error(regs, error_code, address, NULL, vma);
>> + count_vm_vma_lock_event(VMA_LOCK_SUCCESS);
>> + return;
>> }
>> fault = handle_mm_fault(vma, address, flags | FAULT_FLAG_VMA_LOCK, regs);
>> if (!(fault & (VM_FAULT_RETRY | VM_FAULT_COMPLETED)))
>> @@ -1394,7 +1399,7 @@ void do_user_addr_fault(struct pt_regs *regs,
>> * we can handle it..
>> */
>> if (unlikely(access_error(error_code, vma))) {
>> - bad_area_access_error(regs, error_code, address, vma);
>> + bad_area_access_error(regs, error_code, address, mm, vma);
>> return;
>> }
>>
>> --
>> 2.27.0
>>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply
* Re: [PATCH v2 00/18] Improve PCI memory mapping API
From: Damien Le Moal @ 2024-04-03 7:58 UTC (permalink / raw)
To: Manivannan Sadhasivam
Cc: Lorenzo Pieralisi, Kishon Vijay Abraham I, Shawn Lin,
Krzysztof Wilczyński, Bjorn Helgaas, Heiko Stuebner,
linux-pci, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
devicetree, linux-rockchip, linux-arm-kernel, Rick Wertenbroek,
Wilfred Mallawa, Niklas Cassel
In-Reply-To: <20240403075034.GF25309@thinkpad>
On 4/3/24 16:50, Manivannan Sadhasivam wrote:
> On Sat, Mar 30, 2024 at 01:19:10PM +0900, Damien Le Moal wrote:
>> This series introduces the new functions pci_epc_map_align(),
>> pci_epc_mem_map() and pci_epc_mem_unmap() to improve handling of the
>> PCI address mapping alignment constraints of endpoint controllers in a
>> controller independent manner.
>>
>> The issue fixed is that the fixed alignment defined by the "align" field
>> of struct pci_epc_features assumes that the alignment of the endpoint
>> memory used to map a RC PCI address range is independent of the PCI
>> address being mapped. But that is not the case for the rk3399 SoC
>> controller: in endpoint mode, this controller uses the lower bits of the
>> local endpoint memory address as the lower bits for the PCI addresses
>> for data transfers. That is, when mapping local memory, one must take
>> into account the number of bits of the RC PCI address that change from
>> the start address of the mapping.
>>
>> To fix this, the new endpoint controller method .map_align is introduced
>> and called from pci_epc_map_align(). This method is optional and for
>> controllers that do not define it, the mapping information returned
>> is based of the fixed alignment constraint as defined by the align
>> feature.
>>
>> The functions pci_epc_mem_map() is a helper function which obtains
>> mapping information, allocates endpoint controller memory according to
>> the mapping size obtained and maps the memory. pci_epc_mem_map() unmaps
>> and frees the endpoint memory.
>>
>> This series is organized as follows:
>> - Patch 1 tidy up the epc core code
>> - Patch 2 and 3 introduce the new map_align endpoint controller method
>> and related epc functions.
>> - Patch 4 to 6 modify the test endpoint driver to use these new
>> functions and improve the code of this driver.
>
> While posting the next version, please split the endpoint patches into a
> separate series. It helps in code review and can be applied separately.
Which patches ? They are all endpoint related:
(1) Core code
(2) test function driver
(3) rockchip rk3399 controller
(2) and (3) depend on the patches in (1), so splitting the series is a big
possible only if (1) is applied first, so that is a source of delays and breaks
the context of the patches...
--
Damien Le Moal
Western Digital Research
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply
* Re: Re: [PATCH] arm64: dts: rockchip: remove startup-delay-us from vcc3v3_pcie2x1l0 on rock-5b
From: Jianfeng Liu @ 2024-04-03 7:59 UTC (permalink / raw)
To: heiko
Cc: conor+dt, devicetree, krzysztof.kozlowski+dt, linux-arm-kernel,
linux-kernel, linux-rockchip, liujianfeng1994, robh, sfr
In-Reply-To: <2535182.Sgy9Pd6rRy@diego>
Hi Heiko,
Tue, 02 Apr 2024 12:39:17 +0200, Heiko Stübner wrote:
>Does the pcie driver enable the regulator too late somehow?
The pcie driver will enable the regulator imediately when it is probed.
I added log at when driver is probed and when regulator is enabled.
Here is the log with "startup-delay-us = <50000>":
```
[ 1.572991] rockchip-dw-pcie a40800000.pcie: rockchip_pcie_probe start
[ 1.573697] rockchip-dw-pcie a40800000.pcie: going to enable vpcie3v3 regulator
[ 1.575194] rockchip-dw-pcie a40800000.pcie: enable vpcie3v3 regulator done
```
And here is the log without "startup-delay-us":
```
[ 1.518490] rockchip-dw-pcie a40800000.pcie: rockchip_pcie_probe start
[ 1.518603] rockchip-dw-pcie a40800000.pcie: going to enable vpcie3v3 regulator
[ 1.518610] rockchip-dw-pcie a40800000.pcie: enable vpcie3v3 regulator done
```
We can see startup-delay-us will delay the driver probe.
I also take a look at rockchip's SDK kernel, their pci driver is probed
very late:
```
[ 3.398682] dw-pcie fe170000.pcie: invalid resource
[ 3.398686] dw-pcie fe170000.pcie: Failed to initialize host
[ 3.398688] dw-pcie: probe of fe170000.pcie failed with error -22
[ 3.399396] rk-pcie fe170000.pcie: invalid prsnt-gpios property in node
[ 3.399410] rk-pcie fe170000.pcie: Looking up vpcie3v3-supply from device tree
[ 3.405195] rk-pcie fe170000.pcie: host bridge /pcie@fe170000 ranges:
[ 3.405253] rk-pcie fe170000.pcie: IO 0x00f2100000..0x00f21fffff -> 0x00f2100000
[ 3.405283] rk-pcie fe170000.pcie: MEM 0x00f2200000..0x00f2ffffff -> 0x00f2200000
[ 3.405310] rk-pcie fe170000.pcie: MEM 0x0980000000..0x09bfffffff -> 0x0980000000
[ 3.405372] rk-pcie fe170000.pcie: iATU unroll: enabled
[ 3.405381] rk-pcie fe170000.pcie: iATU regions: 8 ob, 8 ib, align 64K, limit 8G
[ 3.666917] rk-pcie fe170000.pcie: PCIe Link up, LTSSM is 0x30011
[ 3.666932] rk-pcie fe170000.pcie: PCIe Gen.1 x1 link up
[ 3.667139] rk-pcie fe170000.pcie: PCI host bridge to bus 0002:20
```
And it is reported that startup-delay-us is necessary in rockchip's SDK
kernel. But in mainline kernel it is different.
Jianfeng
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply
* [PATCH v4 4/9] soc: mediatek: cmdq: Add cmdq_pkt_write_s_reg_value to support write value to reg
From: Shawn Sung @ 2024-04-03 6:55 UTC (permalink / raw)
To: CK Hu, Jassi Brar, AngeloGioacchino Del Regno
Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Matthias Brugger,
Hsiao Chien Sung, Jason-JH . Lin, Houlong Wei, linux-kernel,
devicetree, linux-arm-kernel, linux-mediatek
In-Reply-To: <20240403065603.21920-1-shawn.sung@mediatek.com>
From: "Jason-JH.Lin" <jason-jh.lin@mediatek.com>
Add cmdq_pkt_write_s_reg_value to support write a value to a register.
It appends write_s command to the command buffer in a CMDQ packet,
ask GCE to excute a write instruction to write a value to a register
with low 16 bits physical address offset.
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
---
drivers/soc/mediatek/mtk-cmdq-helper.c | 13 +++++++++++++
include/linux/soc/mediatek/mtk-cmdq.h | 11 +++++++++++
2 files changed, 24 insertions(+)
diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c b/drivers/soc/mediatek/mtk-cmdq-helper.c
index 818e6ab24370a..1d79a127f2d3e 100644
--- a/drivers/soc/mediatek/mtk-cmdq-helper.c
+++ b/drivers/soc/mediatek/mtk-cmdq-helper.c
@@ -289,6 +289,19 @@ int cmdq_pkt_write_s_value(struct cmdq_pkt *pkt, u8 high_addr_reg_idx,
}
EXPORT_SYMBOL(cmdq_pkt_write_s_value);
+int cmdq_pkt_write_s_reg_value(struct cmdq_pkt *pkt, u8 high_addr_reg_idx, u32 value)
+{
+ struct cmdq_instruction inst = {};
+
+ inst.op = CMDQ_CODE_WRITE_S;
+ inst.dst_t = CMDQ_REG_TYPE;
+ inst.reg_dst = high_addr_reg_idx;
+ inst.value = value;
+
+ return cmdq_pkt_append_command(pkt, inst);
+}
+EXPORT_SYMBOL(cmdq_pkt_write_s_reg_value);
+
int cmdq_pkt_write_s_mask_value(struct cmdq_pkt *pkt, u8 high_addr_reg_idx,
u16 addr_low, u32 value, u32 mask)
{
diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h
index 1edb391ec604a..854b8b3d6fad0 100644
--- a/include/linux/soc/mediatek/mtk-cmdq.h
+++ b/include/linux/soc/mediatek/mtk-cmdq.h
@@ -219,6 +219,17 @@ int cmdq_pkt_write_s_mask_value(struct cmdq_pkt *pkt, u8 high_addr_reg_idx,
*/
int cmdq_pkt_mem_move(struct cmdq_pkt *pkt, dma_addr_t src_addr, dma_addr_t dst_addr);
+/**
+ * cmdq_pkt_write_s_reg_value() - append write_s command to the CMDQ packet which
+ * write value to a register with low address pa
+ * @pkt: the CMDQ packet
+ * @high_addr_reg_idx: internal register ID which contains high address of pa
+ * @value: the specified target value
+ *
+ * Return: 0 for success; else the error code is returned
+ */
+int cmdq_pkt_write_s_reg_value(struct cmdq_pkt *pkt, u8 high_addr_reg_idx, u32 value);
+
/**
* cmdq_pkt_wfe() - append wait for event command to the CMDQ packet
* @pkt: the CMDQ packet
--
2.18.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related
* [PATCH v4 3/9] soc: mediatek: cmdq: Add cmdq_pkt_logic_command to support math operation
From: Shawn Sung @ 2024-04-03 6:55 UTC (permalink / raw)
To: CK Hu, Jassi Brar, AngeloGioacchino Del Regno
Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Matthias Brugger,
Hsiao Chien Sung, Jason-JH . Lin, Houlong Wei, linux-kernel,
devicetree, linux-arm-kernel, linux-mediatek
In-Reply-To: <20240403065603.21920-1-shawn.sung@mediatek.com>
From: "Jason-JH.Lin" <jason-jh.lin@mediatek.com>
Add cmdq_pkt_logic_command to support math operation.
cmdq_pkt_logic_command can append logic command to the CMDQ packet,
ask GCE to execute a arithmetic calculate instruction,
such as add, subtract, multiply, AND, OR and NOT, etc.
Note that all arithmetic instructions are unsigned calculations.
If there are any overflows, GCE will sent the invalid IRQ to notify
CMDQ driver.
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
---
drivers/soc/mediatek/mtk-cmdq-helper.c | 36 ++++++++++++++++++++++
include/linux/soc/mediatek/mtk-cmdq.h | 42 ++++++++++++++++++++++++++
2 files changed, 78 insertions(+)
diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c b/drivers/soc/mediatek/mtk-cmdq-helper.c
index 8acd8e38283e0..818e6ab24370a 100644
--- a/drivers/soc/mediatek/mtk-cmdq-helper.c
+++ b/drivers/soc/mediatek/mtk-cmdq-helper.c
@@ -15,9 +15,18 @@
/* dedicate the last GPR_R15 to assign the register address to be poll */
#define CMDQ_POLL_ADDR_GPR (15)
#define CMDQ_EOC_IRQ_EN BIT(0)
+#define CMDQ_IMMEDIATE_VALUE 0
#define CMDQ_REG_TYPE 1
#define CMDQ_JUMP_RELATIVE 1
+#define CMDQ_OPERAND_GET_IDX_VALUE(operand) \
+ ({ \
+ struct cmdq_operand *op = operand; \
+ op->reg ? op->idx : op->value; \
+ })
+#define CMDQ_OPERAND_TYPE(operand) \
+ ((operand)->reg ? CMDQ_REG_TYPE : CMDQ_IMMEDIATE_VALUE)
+
struct cmdq_instruction {
union {
u32 value;
@@ -470,6 +479,33 @@ int cmdq_pkt_poll_addr(struct cmdq_pkt *pkt, dma_addr_t addr, u32 value, u32 mas
}
EXPORT_SYMBOL(cmdq_pkt_poll_addr);
+int cmdq_pkt_logic_command(struct cmdq_pkt *pkt, u16 result_reg_idx,
+ struct cmdq_operand *left_operand,
+ enum cmdq_logic_op s_op,
+ struct cmdq_operand *right_operand)
+{
+ struct cmdq_instruction inst = { {0} };
+ u32 left_idx_value;
+ u32 right_idx_value;
+
+ if (!left_operand || !right_operand || s_op >= CMDQ_LOGIC_MAX)
+ return -EINVAL;
+
+ left_idx_value = CMDQ_OPERAND_GET_IDX_VALUE(left_operand);
+ right_idx_value = CMDQ_OPERAND_GET_IDX_VALUE(right_operand);
+ inst.op = CMDQ_CODE_LOGIC;
+ inst.dst_t = CMDQ_REG_TYPE;
+ inst.src_t = CMDQ_OPERAND_TYPE(left_operand);
+ inst.arg_c_t = CMDQ_OPERAND_TYPE(right_operand);
+ inst.sop = s_op;
+ inst.arg_c = right_idx_value;
+ inst.src_reg = left_idx_value;
+ inst.reg_dst = result_reg_idx;
+
+ return cmdq_pkt_append_command(pkt, inst);
+}
+EXPORT_SYMBOL(cmdq_pkt_logic_command);
+
int cmdq_pkt_assign(struct cmdq_pkt *pkt, u16 reg_idx, u32 value)
{
struct cmdq_instruction inst = {};
diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h
index f708bcfebdd8a..1edb391ec604a 100644
--- a/include/linux/soc/mediatek/mtk-cmdq.h
+++ b/include/linux/soc/mediatek/mtk-cmdq.h
@@ -25,6 +25,31 @@
struct cmdq_pkt;
+enum cmdq_logic_op {
+ CMDQ_LOGIC_ASSIGN = 0,
+ CMDQ_LOGIC_ADD = 1,
+ CMDQ_LOGIC_SUBTRACT = 2,
+ CMDQ_LOGIC_MULTIPLY = 3,
+ CMDQ_LOGIC_XOR = 8,
+ CMDQ_LOGIC_NOT = 9,
+ CMDQ_LOGIC_OR = 10,
+ CMDQ_LOGIC_AND = 11,
+ CMDQ_LOGIC_LEFT_SHIFT = 12,
+ CMDQ_LOGIC_RIGHT_SHIFT = 13,
+ CMDQ_LOGIC_MAX,
+};
+
+struct cmdq_operand {
+ /* register type */
+ bool reg;
+ union {
+ /* index */
+ u16 idx;
+ /* value */
+ u16 value;
+ };
+};
+
struct cmdq_client_reg {
u8 subsys;
u16 offset;
@@ -286,6 +311,23 @@ int cmdq_pkt_poll_mask(struct cmdq_pkt *pkt, u8 subsys,
*/
int cmdq_pkt_poll_addr(struct cmdq_pkt *pkt, dma_addr_t addr, u32 value, u32 mask);
+/**
+ * cmdq_pkt_logic_command() - Append logic command to the CMDQ packet, ask GCE to
+ * execute an instruction that store the result of logic operation
+ * with left and right operand into result_reg_idx.
+ * @pkt: the CMDQ packet
+ * @result_reg_idx: SPR index that store operation result of left_operand and right_operand
+ * @left_operand: left operand
+ * @s_op: the logic operator enum
+ * @right_operand: right operand
+ *
+ * Return: 0 for success; else the error code is returned
+ */
+int cmdq_pkt_logic_command(struct cmdq_pkt *pkt, u16 result_reg_idx,
+ struct cmdq_operand *left_operand,
+ enum cmdq_logic_op s_op,
+ struct cmdq_operand *right_operand);
+
/**
* cmdq_pkt_assign() - Append logic assign command to the CMDQ packet, ask GCE
* to execute an instruction that set a constant value into
--
2.18.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox