[PATCH v2 0/3] Add the support for SM8750 Video clock controller

[PATCH v2 0/3] Add the support for SM8750 Video clock controller

[Taniya Das]

Support the Video clock controller for SM8750 Qualcomm SoC. It includes
the extended logic for branch clocks with mem_ops which requires the
inverted logic.

Changes in v2:
 - Update the commit message for the invert branch mem ops [Dmitry]
 - Update the email to 'oss' and also update copyright.
 - update the RB-by tag from Rob.
 - Link to v1: https://lore.kernel.org/all/20241206-sm8750_videocc-v1-0-5da6e7eea2bd@quicinc.com/

Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
---
Taniya Das (3):
      clk: qcom: branch: Extend invert logic for branch2 mem clocks
      dt-bindings: clock: qcom: Add SM8750 video clock controller
      clk: qcom: videocc-sm8750: Add video clock controller driver for SM8750

 .../bindings/clock/qcom,sm8450-videocc.yaml        |   5 +-
 drivers/clk/qcom/Kconfig                           |  11 +
 drivers/clk/qcom/Makefile                          |   1 +
 drivers/clk/qcom/clk-branch.c                      |  14 +-
 drivers/clk/qcom/clk-branch.h                      |   4 +
 drivers/clk/qcom/videocc-sm8750.c                  | 472 +++++++++++++++++++++
 include/dt-bindings/clock/qcom,sm8750-videocc.h    |  40 ++
 7 files changed, 543 insertions(+), 4 deletions(-)
---
base-commit: 3cace99d63192a7250461b058279a42d91075d0c
change-id: 20250829-sm8750-videocc-v2-6311b334f7a9

Best regards,
-- 
Taniya Das <taniya.das@oss.qualcomm.com>

[PATCH v2 1/3] clk: qcom: branch: Extend invert logic for branch2 mem clocks

[Taniya Das]

Some clock branches require inverted logic for memory gating, where
disabling the memory involves setting a bit and enabling it involves
clearing the same bit. This behavior differs from the standard approach
memory branch clocks ops where enabling typically sets the bit.

Introducing the mem_enable_invert to allow conditional handling of
these sequences of the inverted control logic for memory operations
required on those memory clock branches.

Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
---
 drivers/clk/qcom/clk-branch.c | 14 +++++++++++---
 drivers/clk/qcom/clk-branch.h |  4 ++++
 2 files changed, 15 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/qcom/clk-branch.c b/drivers/clk/qcom/clk-branch.c
index 0f10090d4ae681babbdbbb1b6c68ffe77af7a784..90da1c94b4736f65c87aec92303d511c4aa9a173 100644
--- a/drivers/clk/qcom/clk-branch.c
+++ b/drivers/clk/qcom/clk-branch.c
@@ -142,8 +142,12 @@ static int clk_branch2_mem_enable(struct clk_hw *hw)
 	u32 val;
 	int ret;
 
-	regmap_update_bits(branch.clkr.regmap, mem_br->mem_enable_reg,
-			   mem_br->mem_enable_ack_mask, mem_br->mem_enable_ack_mask);
+	if (mem_br->mem_enable_invert)
+		regmap_update_bits(branch.clkr.regmap, mem_br->mem_enable_reg,
+				  mem_br->mem_enable_mask, 0);
+	else
+		regmap_update_bits(branch.clkr.regmap, mem_br->mem_enable_reg,
+				  mem_br->mem_enable_ack_mask, mem_br->mem_enable_ack_mask);
 
 	ret = regmap_read_poll_timeout(branch.clkr.regmap, mem_br->mem_ack_reg,
 				       val, val & mem_br->mem_enable_ack_mask, 0, 200);
@@ -159,7 +163,11 @@ static void clk_branch2_mem_disable(struct clk_hw *hw)
 {
 	struct clk_mem_branch *mem_br = to_clk_mem_branch(hw);
 
-	regmap_update_bits(mem_br->branch.clkr.regmap, mem_br->mem_enable_reg,
+	if (mem_br->mem_enable_invert)
+		regmap_update_bits(mem_br->branch.clkr.regmap, mem_br->mem_enable_reg,
+			   mem_br->mem_enable_mask, mem_br->mem_enable_mask);
+	else
+		regmap_update_bits(mem_br->branch.clkr.regmap, mem_br->mem_enable_reg,
 			   mem_br->mem_enable_ack_mask, 0);
 
 	return clk_branch2_disable(hw);
diff --git a/drivers/clk/qcom/clk-branch.h b/drivers/clk/qcom/clk-branch.h
index 292756435f53648640717734af198442a315272e..6bc2ba2b5350554005b7f0c84f933580b7582fc7 100644
--- a/drivers/clk/qcom/clk-branch.h
+++ b/drivers/clk/qcom/clk-branch.h
@@ -44,6 +44,8 @@ struct clk_branch {
  * @mem_enable_reg: branch clock memory gating register
  * @mem_ack_reg: branch clock memory ack register
  * @mem_enable_ack_mask: branch clock memory enable and ack field in @mem_ack_reg
+ * @mem_enable_mask: branch clock memory enable mask
+ * @mem_enable_invert: branch clock memory enable and disable has invert logic
  * @branch: branch clock gating handle
  *
  * Clock which can gate its memories.
@@ -52,6 +54,8 @@ struct clk_mem_branch {
 	u32	mem_enable_reg;
 	u32	mem_ack_reg;
 	u32	mem_enable_ack_mask;
+	u32	mem_enable_mask;
+	bool	mem_enable_invert;
 	struct clk_branch branch;
 };
 

-- 
2.34.1

Re: [PATCH v2 1/3] clk: qcom: branch: Extend invert logic for branch2 mem clocks

[Dmitry Baryshkov]

On Fri, Aug 29, 2025 at 03:45:17PM +0530, Taniya Das wrote:
> Some clock branches require inverted logic for memory gating, where
> disabling the memory involves setting a bit and enabling it involves
> clearing the same bit. This behavior differs from the standard approach
> memory branch clocks ops where enabling typically sets the bit.
> 
> Introducing the mem_enable_invert to allow conditional handling of
> these sequences of the inverted control logic for memory operations
> required on those memory clock branches.
> 
> Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
> ---
>  drivers/clk/qcom/clk-branch.c | 14 +++++++++++---
>  drivers/clk/qcom/clk-branch.h |  4 ++++
>  2 files changed, 15 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/clk/qcom/clk-branch.c b/drivers/clk/qcom/clk-branch.c
> index 0f10090d4ae681babbdbbb1b6c68ffe77af7a784..90da1c94b4736f65c87aec92303d511c4aa9a173 100644
> --- a/drivers/clk/qcom/clk-branch.c
> +++ b/drivers/clk/qcom/clk-branch.c
> @@ -142,8 +142,12 @@ static int clk_branch2_mem_enable(struct clk_hw *hw)
>  	u32 val;
>  	int ret;
>  
> -	regmap_update_bits(branch.clkr.regmap, mem_br->mem_enable_reg,
> -			   mem_br->mem_enable_ack_mask, mem_br->mem_enable_ack_mask);
> +	if (mem_br->mem_enable_invert)
> +		regmap_update_bits(branch.clkr.regmap, mem_br->mem_enable_reg,
> +				  mem_br->mem_enable_mask, 0);
> +	else
> +		regmap_update_bits(branch.clkr.regmap, mem_br->mem_enable_reg,
> +				  mem_br->mem_enable_ack_mask, mem_br->mem_enable_ack_mask);

Please check that your lines are properly indented.

>  
>  	ret = regmap_read_poll_timeout(branch.clkr.regmap, mem_br->mem_ack_reg,
>  				       val, val & mem_br->mem_enable_ack_mask, 0, 200);
> @@ -159,7 +163,11 @@ static void clk_branch2_mem_disable(struct clk_hw *hw)
>  {
>  	struct clk_mem_branch *mem_br = to_clk_mem_branch(hw);
>  
> -	regmap_update_bits(mem_br->branch.clkr.regmap, mem_br->mem_enable_reg,
> +	if (mem_br->mem_enable_invert)
> +		regmap_update_bits(mem_br->branch.clkr.regmap, mem_br->mem_enable_reg,
> +			   mem_br->mem_enable_mask, mem_br->mem_enable_mask);

This creates assymmetry. The drivers uses mem_enable_mask in one case
and mem_enable_ack_mask in another.

> +	else
> +		regmap_update_bits(mem_br->branch.clkr.regmap, mem_br->mem_enable_reg,
>  			   mem_br->mem_enable_ack_mask, 0);

And here.

>  
>  	return clk_branch2_disable(hw);
> diff --git a/drivers/clk/qcom/clk-branch.h b/drivers/clk/qcom/clk-branch.h
> index 292756435f53648640717734af198442a315272e..6bc2ba2b5350554005b7f0c84f933580b7582fc7 100644
> --- a/drivers/clk/qcom/clk-branch.h
> +++ b/drivers/clk/qcom/clk-branch.h
> @@ -44,6 +44,8 @@ struct clk_branch {
>   * @mem_enable_reg: branch clock memory gating register
>   * @mem_ack_reg: branch clock memory ack register
>   * @mem_enable_ack_mask: branch clock memory enable and ack field in @mem_ack_reg
> + * @mem_enable_mask: branch clock memory enable mask
> + * @mem_enable_invert: branch clock memory enable and disable has invert logic
>   * @branch: branch clock gating handle
>   *
>   * Clock which can gate its memories.
> @@ -52,6 +54,8 @@ struct clk_mem_branch {
>  	u32	mem_enable_reg;
>  	u32	mem_ack_reg;
>  	u32	mem_enable_ack_mask;
> +	u32	mem_enable_mask;
> +	bool	mem_enable_invert;
>  	struct clk_branch branch;
>  };
>  
> 
> -- 
> 2.34.1
> 

-- 
With best wishes
Dmitry

Re: [PATCH v2 1/3] clk: qcom: branch: Extend invert logic for branch2 mem clocks

[Taniya Das]

On 8/30/2025 5:47 AM, Dmitry Baryshkov wrote:
> On Fri, Aug 29, 2025 at 03:45:17PM +0530, Taniya Das wrote:
>> Some clock branches require inverted logic for memory gating, where
>> disabling the memory involves setting a bit and enabling it involves
>> clearing the same bit. This behavior differs from the standard approach
>> memory branch clocks ops where enabling typically sets the bit.
>>
>> Introducing the mem_enable_invert to allow conditional handling of
>> these sequences of the inverted control logic for memory operations
>> required on those memory clock branches.
>>
>> Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
>> ---
>>  drivers/clk/qcom/clk-branch.c | 14 +++++++++++---
>>  drivers/clk/qcom/clk-branch.h |  4 ++++
>>  2 files changed, 15 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/clk/qcom/clk-branch.c b/drivers/clk/qcom/clk-branch.c
>> index 0f10090d4ae681babbdbbb1b6c68ffe77af7a784..90da1c94b4736f65c87aec92303d511c4aa9a173 100644
>> --- a/drivers/clk/qcom/clk-branch.c
>> +++ b/drivers/clk/qcom/clk-branch.c
>> @@ -142,8 +142,12 @@ static int clk_branch2_mem_enable(struct clk_hw *hw)
>>  	u32 val;
>>  	int ret;
>>  
>> -	regmap_update_bits(branch.clkr.regmap, mem_br->mem_enable_reg,
>> -			   mem_br->mem_enable_ack_mask, mem_br->mem_enable_ack_mask);
>> +	if (mem_br->mem_enable_invert)
>> +		regmap_update_bits(branch.clkr.regmap, mem_br->mem_enable_reg,
>> +				  mem_br->mem_enable_mask, 0);
>> +	else
>> +		regmap_update_bits(branch.clkr.regmap, mem_br->mem_enable_reg,
>> +				  mem_br->mem_enable_ack_mask, mem_br->mem_enable_ack_mask);
> 
> Please check that your lines are properly indented.
> 

Sorry, sure will fix in the next patch.

>>  
>>  	ret = regmap_read_poll_timeout(branch.clkr.regmap, mem_br->mem_ack_reg,
>>  				       val, val & mem_br->mem_enable_ack_mask, 0, 200);
>> @@ -159,7 +163,11 @@ static void clk_branch2_mem_disable(struct clk_hw *hw)
>>  {
>>  	struct clk_mem_branch *mem_br = to_clk_mem_branch(hw);
>>  
>> -	regmap_update_bits(mem_br->branch.clkr.regmap, mem_br->mem_enable_reg,
>> +	if (mem_br->mem_enable_invert)
>> +		regmap_update_bits(mem_br->branch.clkr.regmap, mem_br->mem_enable_reg,
>> +			   mem_br->mem_enable_mask, mem_br->mem_enable_mask);
> 
> This creates assymmetry. The drivers uses mem_enable_mask in one case
> and mem_enable_ack_mask in another.

Will try to use the common mask.

> 
>> +	else
>> +		regmap_update_bits(mem_br->branch.clkr.regmap, mem_br->mem_enable_reg,
>>  			   mem_br->mem_enable_ack_mask, 0);
> 
> And here.
> 

Will fix here too.

>>  
>>  	return clk_branch2_disable(hw);
>> diff --git a/drivers/clk/qcom/clk-branch.h b/drivers/clk/qcom/clk-branch.h
>> index 292756435f53648640717734af198442a315272e..6bc2ba2b5350554005b7f0c84f933580b7582fc7 100644
>> --- a/drivers/clk/qcom/clk-branch.h
>> +++ b/drivers/clk/qcom/clk-branch.h
>> @@ -44,6 +44,8 @@ struct clk_branch {
>>   * @mem_enable_reg: branch clock memory gating register
>>   * @mem_ack_reg: branch clock memory ack register
>>   * @mem_enable_ack_mask: branch clock memory enable and ack field in @mem_ack_reg
>> + * @mem_enable_mask: branch clock memory enable mask
>> + * @mem_enable_invert: branch clock memory enable and disable has invert logic
>>   * @branch: branch clock gating handle
>>   *
>>   * Clock which can gate its memories.
>> @@ -52,6 +54,8 @@ struct clk_mem_branch {
>>  	u32	mem_enable_reg;
>>  	u32	mem_ack_reg;
>>  	u32	mem_enable_ack_mask;
>> +	u32	mem_enable_mask;
>> +	bool	mem_enable_invert;
>>  	struct clk_branch branch;
>>  };
>>  
>>
>> -- 
>> 2.34.1
>>
> 

-- 
Thanks,
Taniya Das

Re: [PATCH v2 1/3] clk: qcom: branch: Extend invert logic for branch2 mem clocks

[Konrad Dybcio]

On 8/29/25 12:15 PM, Taniya Das wrote:
> Some clock branches require inverted logic for memory gating, where
> disabling the memory involves setting a bit and enabling it involves
> clearing the same bit. This behavior differs from the standard approach
> memory branch clocks ops where enabling typically sets the bit.
> 
> Introducing the mem_enable_invert to allow conditional handling of
> these sequences of the inverted control logic for memory operations
> required on those memory clock branches.
> 
> Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
> ---
>  drivers/clk/qcom/clk-branch.c | 14 +++++++++++---
>  drivers/clk/qcom/clk-branch.h |  4 ++++
>  2 files changed, 15 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/clk/qcom/clk-branch.c b/drivers/clk/qcom/clk-branch.c
> index 0f10090d4ae681babbdbbb1b6c68ffe77af7a784..90da1c94b4736f65c87aec92303d511c4aa9a173 100644
> --- a/drivers/clk/qcom/clk-branch.c
> +++ b/drivers/clk/qcom/clk-branch.c
> @@ -142,8 +142,12 @@ static int clk_branch2_mem_enable(struct clk_hw *hw)
>  	u32 val;
>  	int ret;
>  
> -	regmap_update_bits(branch.clkr.regmap, mem_br->mem_enable_reg,
> -			   mem_br->mem_enable_ack_mask, mem_br->mem_enable_ack_mask);
> +	if (mem_br->mem_enable_invert)
> +		regmap_update_bits(branch.clkr.regmap, mem_br->mem_enable_reg,
> +				  mem_br->mem_enable_mask, 0);
> +	else
> +		regmap_update_bits(branch.clkr.regmap, mem_br->mem_enable_reg,
> +				  mem_br->mem_enable_ack_mask, mem_br->mem_enable_ack_mask);

regmap_assign_bits() is your friend

Konrad

Re: [PATCH v2 1/3] clk: qcom: branch: Extend invert logic for branch2 mem clocks

[Taniya Das]

On 9/2/2025 5:27 PM, Konrad Dybcio wrote:
> On 8/29/25 12:15 PM, Taniya Das wrote:
>> Some clock branches require inverted logic for memory gating, where
>> disabling the memory involves setting a bit and enabling it involves
>> clearing the same bit. This behavior differs from the standard approach
>> memory branch clocks ops where enabling typically sets the bit.
>>
>> Introducing the mem_enable_invert to allow conditional handling of
>> these sequences of the inverted control logic for memory operations
>> required on those memory clock branches.
>>
>> Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
>> ---
>>  drivers/clk/qcom/clk-branch.c | 14 +++++++++++---
>>  drivers/clk/qcom/clk-branch.h |  4 ++++
>>  2 files changed, 15 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/clk/qcom/clk-branch.c b/drivers/clk/qcom/clk-branch.c
>> index 0f10090d4ae681babbdbbb1b6c68ffe77af7a784..90da1c94b4736f65c87aec92303d511c4aa9a173 100644
>> --- a/drivers/clk/qcom/clk-branch.c
>> +++ b/drivers/clk/qcom/clk-branch.c
>> @@ -142,8 +142,12 @@ static int clk_branch2_mem_enable(struct clk_hw *hw)
>>  	u32 val;
>>  	int ret;
>>  
>> -	regmap_update_bits(branch.clkr.regmap, mem_br->mem_enable_reg,
>> -			   mem_br->mem_enable_ack_mask, mem_br->mem_enable_ack_mask);
>> +	if (mem_br->mem_enable_invert)
>> +		regmap_update_bits(branch.clkr.regmap, mem_br->mem_enable_reg,
>> +				  mem_br->mem_enable_mask, 0);
>> +	else
>> +		regmap_update_bits(branch.clkr.regmap, mem_br->mem_enable_reg,
>> +				  mem_br->mem_enable_ack_mask, mem_br->mem_enable_ack_mask);
> 
> regmap_assign_bits() is your friend
> 

Thanks, Konrad, will use this API.

> Konrad

-- 
Thanks,
Taniya Das

[PATCH v2 2/3] dt-bindings: clock: qcom: Add SM8750 video clock controller

[Taniya Das]

Add compatible string for SM8750 video clock controller and the bindings
for SM8750 Qualcomm SoC.

Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
---
 .../bindings/clock/qcom,sm8450-videocc.yaml        |  5 ++-
 include/dt-bindings/clock/qcom,sm8750-videocc.h    | 40 ++++++++++++++++++++++
 2 files changed, 44 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml
index fcd2727dae46711650fc8fe71221a06630040026..b31bd833552937fa896f69966cfe5c79d9cfdd21 100644
--- a/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm Video Clock & Reset Controller on SM8450
 
 maintainers:
-  - Taniya Das <quic_tdas@quicinc.com>
+  - Taniya Das <taniya.das@oss.qualcomm.com>
   - Jagadeesh Kona <quic_jkona@quicinc.com>
 
 description: |
@@ -17,6 +17,7 @@ description: |
   See also:
     include/dt-bindings/clock/qcom,sm8450-videocc.h
     include/dt-bindings/clock/qcom,sm8650-videocc.h
+    include/dt-bindings/clock/qcom,sm8750-videocc.h
 
 properties:
   compatible:
@@ -25,6 +26,7 @@ properties:
       - qcom,sm8475-videocc
       - qcom,sm8550-videocc
       - qcom,sm8650-videocc
+      - qcom,sm8750-videocc
       - qcom,x1e80100-videocc
 
   clocks:
@@ -61,6 +63,7 @@ allOf:
             enum:
               - qcom,sm8450-videocc
               - qcom,sm8550-videocc
+              - qcom,sm8750-videocc
     then:
       required:
         - required-opps
diff --git a/include/dt-bindings/clock/qcom,sm8750-videocc.h b/include/dt-bindings/clock/qcom,sm8750-videocc.h
new file mode 100644
index 0000000000000000000000000000000000000000..f3bfa2ba51607d0133efcdad9c7729eb7a49b177
--- /dev/null
+++ b/include/dt-bindings/clock/qcom,sm8750-videocc.h
@@ -0,0 +1,40 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ */
+
+#ifndef _DT_BINDINGS_CLK_QCOM_VIDEO_CC_SM8750_H
+#define _DT_BINDINGS_CLK_QCOM_VIDEO_CC_SM8750_H
+
+/* VIDEO_CC clocks */
+#define VIDEO_CC_AHB_CLK					0
+#define VIDEO_CC_AHB_CLK_SRC					1
+#define VIDEO_CC_MVS0_CLK					2
+#define VIDEO_CC_MVS0_CLK_SRC					3
+#define VIDEO_CC_MVS0_DIV_CLK_SRC				4
+#define VIDEO_CC_MVS0_FREERUN_CLK				5
+#define VIDEO_CC_MVS0_SHIFT_CLK					6
+#define VIDEO_CC_MVS0C_CLK					7
+#define VIDEO_CC_MVS0C_DIV2_DIV_CLK_SRC				8
+#define VIDEO_CC_MVS0C_FREERUN_CLK				9
+#define VIDEO_CC_MVS0C_SHIFT_CLK				10
+#define VIDEO_CC_PLL0						11
+#define VIDEO_CC_SLEEP_CLK					12
+#define VIDEO_CC_SLEEP_CLK_SRC					13
+#define VIDEO_CC_XO_CLK						14
+#define VIDEO_CC_XO_CLK_SRC					15
+
+/* VIDEO_CC power domains */
+#define VIDEO_CC_MVS0_GDSC					0
+#define VIDEO_CC_MVS0C_GDSC					1
+
+/* VIDEO_CC resets */
+#define VIDEO_CC_INTERFACE_BCR					0
+#define VIDEO_CC_MVS0_BCR					1
+#define VIDEO_CC_MVS0C_CLK_ARES					2
+#define VIDEO_CC_MVS0C_BCR					3
+#define VIDEO_CC_MVS0_FREERUN_CLK_ARES				4
+#define VIDEO_CC_MVS0C_FREERUN_CLK_ARES				5
+#define VIDEO_CC_XO_CLK_ARES					6
+
+#endif

-- 
2.34.1

Re: [PATCH v2 2/3] dt-bindings: clock: qcom: Add SM8750 video clock controller

[Bryan O'Donoghue]

On 29/08/2025 11:15, Taniya Das wrote:
> Add compatible string for SM8750 video clock controller and the bindings
> for SM8750 Qualcomm SoC.
> 
> Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
> Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
> ---
>   .../bindings/clock/qcom,sm8450-videocc.yaml        |  5 ++-
>   include/dt-bindings/clock/qcom,sm8750-videocc.h    | 40 ++++++++++++++++++++++
>   2 files changed, 44 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml
> index fcd2727dae46711650fc8fe71221a06630040026..b31bd833552937fa896f69966cfe5c79d9cfdd21 100644
> --- a/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml
> +++ b/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml
> @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
>   title: Qualcomm Video Clock & Reset Controller on SM8450
> 
>   maintainers:
> -  - Taniya Das <quic_tdas@quicinc.com>
> +  - Taniya Das <taniya.das@oss.qualcomm.com>
>     - Jagadeesh Kona <quic_jkona@quicinc.com>
> 
>   description: |
> @@ -17,6 +17,7 @@ description: |
>     See also:
>       include/dt-bindings/clock/qcom,sm8450-videocc.h
>       include/dt-bindings/clock/qcom,sm8650-videocc.h
> +    include/dt-bindings/clock/qcom,sm8750-videocc.h
> 
>   properties:
>     compatible:
> @@ -25,6 +26,7 @@ properties:
>         - qcom,sm8475-videocc
>         - qcom,sm8550-videocc
>         - qcom,sm8650-videocc
> +      - qcom,sm8750-videocc

Shouldn't this be qcom,pakala-videocc now ?

---
bod

Re: [PATCH v2 2/3] dt-bindings: clock: qcom: Add SM8750 video clock controller

[Taniya Das]

On 9/15/2025 4:28 PM, Bryan O'Donoghue wrote:
> On 29/08/2025 11:15, Taniya Das wrote:
>> Add compatible string for SM8750 video clock controller and the bindings
>> for SM8750 Qualcomm SoC.
>>
>> Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
>> Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
>> ---
>>   .../bindings/clock/qcom,sm8450-videocc.yaml        |  5 ++-
>>   include/dt-bindings/clock/qcom,sm8750-videocc.h    | 40 ++++++++++++
>> ++++++++++
>>   2 files changed, 44 insertions(+), 1 deletion(-)
>>
>> diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8450-
>> videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8450-
>> videocc.yaml
>> index
>> fcd2727dae46711650fc8fe71221a06630040026..b31bd833552937fa896f69966cfe5c79d9cfdd21 100644
>> --- a/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml
>> +++ b/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml
>> @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
>>   title: Qualcomm Video Clock & Reset Controller on SM8450
>>
>>   maintainers:
>> -  - Taniya Das <quic_tdas@quicinc.com>
>> +  - Taniya Das <taniya.das@oss.qualcomm.com>
>>     - Jagadeesh Kona <quic_jkona@quicinc.com>
>>
>>   description: |
>> @@ -17,6 +17,7 @@ description: |
>>     See also:
>>       include/dt-bindings/clock/qcom,sm8450-videocc.h
>>       include/dt-bindings/clock/qcom,sm8650-videocc.h
>> +    include/dt-bindings/clock/qcom,sm8750-videocc.h
>>
>>   properties:
>>     compatible:
>> @@ -25,6 +26,7 @@ properties:
>>         - qcom,sm8475-videocc
>>         - qcom,sm8550-videocc
>>         - qcom,sm8650-videocc
>> +      - qcom,sm8750-videocc
> 
> Shouldn't this be qcom,pakala-videocc now ?
> 

As of now, Bryan, all of Pakala is using the SM8750. We can migrate
everything together to maintain consistency.


-- 
Thanks,
Taniya Das

Re: [PATCH v2 2/3] dt-bindings: clock: qcom: Add SM8750 video clock controller

[Konrad Dybcio]

On 9/26/25 11:18 AM, Taniya Das wrote:
> 
> 
> On 9/15/2025 4:28 PM, Bryan O'Donoghue wrote:
>> On 29/08/2025 11:15, Taniya Das wrote:
>>> Add compatible string for SM8750 video clock controller and the bindings
>>> for SM8750 Qualcomm SoC.
>>>
>>> Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
>>> Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
>>> ---

[...]

>>>   properties:
>>>     compatible:
>>> @@ -25,6 +26,7 @@ properties:
>>>         - qcom,sm8475-videocc
>>>         - qcom,sm8550-videocc
>>>         - qcom,sm8650-videocc
>>> +      - qcom,sm8750-videocc
>>
>> Shouldn't this be qcom,pakala-videocc now ?
>>
> 
> As of now, Bryan, all of Pakala is using the SM8750. We can migrate
> everything together to maintain consistency.

We settled on keeping new compatibles numerical for already-numerical
platforms (except board compatibles where all the fuss was / as it makes
sense)

Konrad

Re: [PATCH v2 2/3] dt-bindings: clock: qcom: Add SM8750 video clock controller

[Taniya Das]

On 9/26/2025 4:44 PM, Konrad Dybcio wrote:
> On 9/26/25 11:18 AM, Taniya Das wrote:
>>
>>
>> On 9/15/2025 4:28 PM, Bryan O'Donoghue wrote:
>>> On 29/08/2025 11:15, Taniya Das wrote:
>>>> Add compatible string for SM8750 video clock controller and the bindings
>>>> for SM8750 Qualcomm SoC.
>>>>
>>>> Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
>>>> Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
>>>> ---
> 
> [...]
> 
>>>>   properties:
>>>>     compatible:
>>>> @@ -25,6 +26,7 @@ properties:
>>>>         - qcom,sm8475-videocc
>>>>         - qcom,sm8550-videocc
>>>>         - qcom,sm8650-videocc
>>>> +      - qcom,sm8750-videocc
>>>
>>> Shouldn't this be qcom,pakala-videocc now ?
>>>
>>
>> As of now, Bryan, all of Pakala is using the SM8750. We can migrate
>> everything together to maintain consistency.
> 
> We settled on keeping new compatibles numerical for already-numerical
> platforms (except board compatibles where all the fuss was / as it makes
> sense)
> 
> Konrad


Thanks Konrad, will keep "qcom,sm8750-videocc".

-- 
Thanks,
Taniya Das

Re: [PATCH v2 2/3] dt-bindings: clock: qcom: Add SM8750 video clock controller

[Krzysztof Kozlowski]

On 15/09/2025 19:58, Bryan O'Donoghue wrote:
>>   properties:
>>     compatible:
>> @@ -25,6 +26,7 @@ properties:
>>         - qcom,sm8475-videocc
>>         - qcom,sm8550-videocc
>>         - qcom,sm8650-videocc
>> +      - qcom,sm8750-videocc
> 
> Shouldn't this be qcom,pakala-videocc now ?

No, why? There is no such soc as "pakala". See qcom bindings.

Best regards,
Krzysztof

[PATCH v2 3/3] clk: qcom: videocc-sm8750: Add video clock controller driver for SM8750

[Taniya Das]

Add support for the video clock controller for video clients to be able
to request for videocc clocks on SM8750 platform.

Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
---
 drivers/clk/qcom/Kconfig          |  11 +
 drivers/clk/qcom/Makefile         |   1 +
 drivers/clk/qcom/videocc-sm8750.c | 472 ++++++++++++++++++++++++++++++++++++++
 3 files changed, 484 insertions(+)

diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index aeb6197d7c902098459c9b2cba75072bd519b0f3..2c5a0c86e01f0bf2518e5b78a9f50835fac3d019 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -1489,6 +1489,17 @@ config SM_VIDEOCC_8550
 	  Say Y if you want to support video devices and functionality such as
 	  video encode/decode.
 
+config SM_VIDEOCC_8750
+	tristate "SM8750 Video Clock Controller"
+	depends on ARM64 || COMPILE_TEST
+	select SM_GCC_8750
+	select QCOM_GDSC
+	help
+	  Support for the video clock controller on Qualcomm Technologies, Inc.
+	  SM8750 devices.
+	  Say Y if you want to support video devices and functionality such as
+	  video encode/decode.
+
 config SPMI_PMIC_CLKDIV
 	tristate "SPMI PMIC clkdiv Support"
 	depends on SPMI || COMPILE_TEST
diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index 98de55eb64026a12d89587db295f8a6ac59ee2f7..fccb7eb5135dc4df3ccadf711f2c7b9ce0459a83 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -181,6 +181,7 @@ obj-$(CONFIG_SM_VIDEOCC_8250) += videocc-sm8250.o
 obj-$(CONFIG_SM_VIDEOCC_8350) += videocc-sm8350.o
 obj-$(CONFIG_SM_VIDEOCC_8450) += videocc-sm8450.o
 obj-$(CONFIG_SM_VIDEOCC_8550) += videocc-sm8550.o
+obj-$(CONFIG_SM_VIDEOCC_8750) += videocc-sm8750.o
 obj-$(CONFIG_SM_VIDEOCC_MILOS) += videocc-milos.o
 obj-$(CONFIG_SPMI_PMIC_CLKDIV) += clk-spmi-pmic-div.o
 obj-$(CONFIG_KPSS_XCC) += kpss-xcc.o
diff --git a/drivers/clk/qcom/videocc-sm8750.c b/drivers/clk/qcom/videocc-sm8750.c
new file mode 100644
index 0000000000000000000000000000000000000000..27b5b34602da0dcde8826e9d2fdbda5ff09fde5b
--- /dev/null
+++ b/drivers/clk/qcom/videocc-sm8750.c
@@ -0,0 +1,472 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+
+#include <dt-bindings/clock/qcom,sm8750-videocc.h>
+
+#include "clk-alpha-pll.h"
+#include "clk-branch.h"
+#include "clk-pll.h"
+#include "clk-rcg.h"
+#include "clk-regmap.h"
+#include "clk-regmap-divider.h"
+#include "clk-regmap-mux.h"
+#include "common.h"
+#include "gdsc.h"
+#include "reset.h"
+
+enum {
+	DT_BI_TCXO,
+	DT_BI_TCXO_AO,
+	DT_SLEEP_CLK,
+};
+
+enum {
+	P_BI_TCXO,
+	P_SLEEP_CLK,
+	P_VIDEO_CC_PLL0_OUT_MAIN,
+};
+
+static const struct pll_vco taycan_elu_vco[] = {
+	{ 249600000, 2500000000, 0 },
+};
+
+static const struct alpha_pll_config video_cc_pll0_config = {
+	.l = 0x25,
+	.alpha = 0x8000,
+	.config_ctl_val = 0x19660387,
+	.config_ctl_hi_val = 0x098060a0,
+	.config_ctl_hi1_val = 0xb416cb20,
+	.user_ctl_val = 0x00000000,
+	.user_ctl_hi_val = 0x00000002,
+};
+
+static struct clk_alpha_pll video_cc_pll0 = {
+	.offset = 0x0,
+	.vco_table = taycan_elu_vco,
+	.num_vco = ARRAY_SIZE(taycan_elu_vco),
+	.regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_TAYCAN_ELU],
+	.clkr = {
+		.hw.init = &(const struct clk_init_data) {
+			.name = "video_cc_pll0",
+			.parent_data = &(const struct clk_parent_data) {
+				.index = DT_BI_TCXO,
+			},
+			.num_parents = 1,
+			.ops = &clk_alpha_pll_taycan_elu_ops,
+		},
+	},
+};
+
+static const struct parent_map video_cc_parent_map_0[] = {
+	{ P_BI_TCXO, 0 },
+};
+
+static const struct clk_parent_data video_cc_parent_data_0_ao[] = {
+	{ .index = DT_BI_TCXO_AO },
+};
+
+static const struct parent_map video_cc_parent_map_1[] = {
+	{ P_BI_TCXO, 0 },
+	{ P_VIDEO_CC_PLL0_OUT_MAIN, 1 },
+};
+
+static const struct clk_parent_data video_cc_parent_data_1[] = {
+	{ .index = DT_BI_TCXO },
+	{ .hw = &video_cc_pll0.clkr.hw },
+};
+
+static const struct parent_map video_cc_parent_map_2[] = {
+	{ P_SLEEP_CLK, 0 },
+};
+
+static const struct clk_parent_data video_cc_parent_data_2_ao[] = {
+	{ .index = DT_SLEEP_CLK },
+};
+
+static const struct freq_tbl ftbl_video_cc_ahb_clk_src[] = {
+	F(19200000, P_BI_TCXO, 1, 0, 0),
+	{ }
+};
+
+static struct clk_rcg2 video_cc_ahb_clk_src = {
+	.cmd_rcgr = 0x8018,
+	.mnd_width = 0,
+	.hid_width = 5,
+	.parent_map = video_cc_parent_map_0,
+	.freq_tbl = ftbl_video_cc_ahb_clk_src,
+	.clkr.hw.init = &(const struct clk_init_data) {
+		.name = "video_cc_ahb_clk_src",
+		.parent_data = video_cc_parent_data_0_ao,
+		.num_parents = ARRAY_SIZE(video_cc_parent_data_0_ao),
+		.flags = CLK_SET_RATE_PARENT,
+		.ops = &clk_rcg2_ops,
+	},
+};
+
+static const struct freq_tbl ftbl_video_cc_mvs0_clk_src[] = {
+	F(720000000, P_VIDEO_CC_PLL0_OUT_MAIN, 1, 0, 0),
+	F(1014000000, P_VIDEO_CC_PLL0_OUT_MAIN, 1, 0, 0),
+	F(1260000000, P_VIDEO_CC_PLL0_OUT_MAIN, 1, 0, 0),
+	F(1332000000, P_VIDEO_CC_PLL0_OUT_MAIN, 1, 0, 0),
+	F(1600000000, P_VIDEO_CC_PLL0_OUT_MAIN, 1, 0, 0),
+	F(1710000000, P_VIDEO_CC_PLL0_OUT_MAIN, 1, 0, 0),
+	F(1890000000, P_VIDEO_CC_PLL0_OUT_MAIN, 1, 0, 0),
+	{ }
+};
+
+static struct clk_rcg2 video_cc_mvs0_clk_src = {
+	.cmd_rcgr = 0x8000,
+	.mnd_width = 0,
+	.hid_width = 5,
+	.parent_map = video_cc_parent_map_1,
+	.freq_tbl = ftbl_video_cc_mvs0_clk_src,
+	.clkr.hw.init = &(const struct clk_init_data) {
+		.name = "video_cc_mvs0_clk_src",
+		.parent_data = video_cc_parent_data_1,
+		.num_parents = ARRAY_SIZE(video_cc_parent_data_1),
+		.flags = CLK_SET_RATE_PARENT,
+		.ops = &clk_rcg2_shared_ops,
+	},
+};
+
+static const struct freq_tbl ftbl_video_cc_sleep_clk_src[] = {
+	F(32000, P_SLEEP_CLK, 1, 0, 0),
+	{ }
+};
+
+static struct clk_rcg2 video_cc_sleep_clk_src = {
+	.cmd_rcgr = 0x80e0,
+	.mnd_width = 0,
+	.hid_width = 5,
+	.parent_map = video_cc_parent_map_2,
+	.freq_tbl = ftbl_video_cc_sleep_clk_src,
+	.clkr.hw.init = &(const struct clk_init_data) {
+		.name = "video_cc_sleep_clk_src",
+		.parent_data = video_cc_parent_data_2_ao,
+		.num_parents = ARRAY_SIZE(video_cc_parent_data_2_ao),
+		.flags = CLK_SET_RATE_PARENT,
+		.ops = &clk_rcg2_ops,
+	},
+};
+
+static struct clk_rcg2 video_cc_xo_clk_src = {
+	.cmd_rcgr = 0x80bc,
+	.mnd_width = 0,
+	.hid_width = 5,
+	.parent_map = video_cc_parent_map_0,
+	.freq_tbl = ftbl_video_cc_ahb_clk_src,
+	.clkr.hw.init = &(const struct clk_init_data) {
+		.name = "video_cc_xo_clk_src",
+		.parent_data = video_cc_parent_data_0_ao,
+		.num_parents = ARRAY_SIZE(video_cc_parent_data_0_ao),
+		.flags = CLK_SET_RATE_PARENT,
+		.ops = &clk_rcg2_ops,
+	},
+};
+
+static struct clk_regmap_div video_cc_mvs0_div_clk_src = {
+	.reg = 0x809c,
+	.shift = 0,
+	.width = 4,
+	.clkr.hw.init = &(const struct clk_init_data) {
+		.name = "video_cc_mvs0_div_clk_src",
+		.parent_hws = (const struct clk_hw*[]) {
+			&video_cc_mvs0_clk_src.clkr.hw,
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+		.ops = &clk_regmap_div_ro_ops,
+	},
+};
+
+static struct clk_regmap_div video_cc_mvs0c_div2_div_clk_src = {
+	.reg = 0x8060,
+	.shift = 0,
+	.width = 4,
+	.clkr.hw.init = &(const struct clk_init_data) {
+		.name = "video_cc_mvs0c_div2_div_clk_src",
+		.parent_hws = (const struct clk_hw*[]) {
+			&video_cc_mvs0_clk_src.clkr.hw,
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+		.ops = &clk_regmap_div_ro_ops,
+	},
+};
+
+static struct clk_branch video_cc_mvs0_clk = {
+	.halt_reg = 0x807c,
+	.halt_check = BRANCH_HALT_VOTED,
+	.hwcg_reg = 0x807c,
+	.hwcg_bit = 1,
+	.clkr = {
+		.enable_reg = 0x807c,
+		.enable_mask = BIT(0),
+		.hw.init = &(const struct clk_init_data) {
+			.name = "video_cc_mvs0_clk",
+			.parent_hws = (const struct clk_hw*[]) {
+				&video_cc_mvs0_div_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_mem_branch video_cc_mvs0_freerun_clk = {
+	.mem_enable_reg = 0x8090,
+	.mem_ack_reg =  0x8090,
+	.mem_enable_mask = BIT(3),
+	.mem_enable_ack_mask = 0xc00,
+	.mem_enable_invert = true,
+	.branch = {
+		.halt_reg = 0x808c,
+		.halt_check = BRANCH_HALT,
+		.clkr = {
+			.enable_reg = 0x808c,
+			.enable_mask = BIT(0),
+			.hw.init = &(const struct clk_init_data) {
+				.name = "video_cc_mvs0_freerun_clk",
+				.parent_hws = (const struct clk_hw*[]) {
+					&video_cc_mvs0_div_clk_src.clkr.hw,
+				},
+				.num_parents = 1,
+				.flags = CLK_SET_RATE_PARENT,
+				.ops = &clk_branch2_mem_ops,
+			},
+		},
+	},
+};
+
+static struct clk_branch video_cc_mvs0_shift_clk = {
+	.halt_reg = 0x80d8,
+	.halt_check = BRANCH_HALT_VOTED,
+	.hwcg_reg = 0x80d8,
+	.hwcg_bit = 1,
+	.clkr = {
+		.enable_reg = 0x80d8,
+		.enable_mask = BIT(0),
+		.hw.init = &(const struct clk_init_data) {
+			.name = "video_cc_mvs0_shift_clk",
+			.parent_hws = (const struct clk_hw*[]) {
+				&video_cc_xo_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch video_cc_mvs0c_clk = {
+	.halt_reg = 0x804c,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x804c,
+		.enable_mask = BIT(0),
+		.hw.init = &(const struct clk_init_data) {
+			.name = "video_cc_mvs0c_clk",
+			.parent_hws = (const struct clk_hw*[]) {
+				&video_cc_mvs0c_div2_div_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch video_cc_mvs0c_freerun_clk = {
+	.halt_reg = 0x805c,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x805c,
+		.enable_mask = BIT(0),
+		.hw.init = &(const struct clk_init_data) {
+			.name = "video_cc_mvs0c_freerun_clk",
+			.parent_hws = (const struct clk_hw*[]) {
+				&video_cc_mvs0c_div2_div_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch video_cc_mvs0c_shift_clk = {
+	.halt_reg = 0x80dc,
+	.halt_check = BRANCH_HALT_VOTED,
+	.hwcg_reg = 0x80dc,
+	.hwcg_bit = 1,
+	.clkr = {
+		.enable_reg = 0x80dc,
+		.enable_mask = BIT(0),
+		.hw.init = &(const struct clk_init_data) {
+			.name = "video_cc_mvs0c_shift_clk",
+			.parent_hws = (const struct clk_hw*[]) {
+				&video_cc_xo_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct gdsc video_cc_mvs0c_gdsc = {
+	.gdscr = 0x8034,
+	.en_rest_wait_val = 0x2,
+	.en_few_wait_val = 0x2,
+	.clk_dis_wait_val = 0x6,
+	.pd = {
+		.name = "video_cc_mvs0c_gdsc",
+	},
+	.pwrsts = PWRSTS_OFF_ON,
+	.flags = POLL_CFG_GDSCR | RETAIN_FF_ENABLE,
+};
+
+static struct gdsc video_cc_mvs0_gdsc = {
+	.gdscr = 0x8068,
+	.en_rest_wait_val = 0x2,
+	.en_few_wait_val = 0x2,
+	.clk_dis_wait_val = 0x6,
+	.pd = {
+		.name = "video_cc_mvs0_gdsc",
+	},
+	.pwrsts = PWRSTS_OFF_ON,
+	.parent = &video_cc_mvs0c_gdsc.pd,
+	.flags = POLL_CFG_GDSCR | RETAIN_FF_ENABLE | HW_CTRL_TRIGGER,
+};
+
+static struct clk_regmap *video_cc_sm8750_clocks[] = {
+	[VIDEO_CC_AHB_CLK_SRC] = &video_cc_ahb_clk_src.clkr,
+	[VIDEO_CC_MVS0_CLK] = &video_cc_mvs0_clk.clkr,
+	[VIDEO_CC_MVS0_CLK_SRC] = &video_cc_mvs0_clk_src.clkr,
+	[VIDEO_CC_MVS0_DIV_CLK_SRC] = &video_cc_mvs0_div_clk_src.clkr,
+	[VIDEO_CC_MVS0_FREERUN_CLK] = &video_cc_mvs0_freerun_clk.branch.clkr,
+	[VIDEO_CC_MVS0_SHIFT_CLK] = &video_cc_mvs0_shift_clk.clkr,
+	[VIDEO_CC_MVS0C_CLK] = &video_cc_mvs0c_clk.clkr,
+	[VIDEO_CC_MVS0C_DIV2_DIV_CLK_SRC] = &video_cc_mvs0c_div2_div_clk_src.clkr,
+	[VIDEO_CC_MVS0C_FREERUN_CLK] = &video_cc_mvs0c_freerun_clk.clkr,
+	[VIDEO_CC_MVS0C_SHIFT_CLK] = &video_cc_mvs0c_shift_clk.clkr,
+	[VIDEO_CC_PLL0] = &video_cc_pll0.clkr,
+	[VIDEO_CC_SLEEP_CLK_SRC] = &video_cc_sleep_clk_src.clkr,
+	[VIDEO_CC_XO_CLK_SRC] = &video_cc_xo_clk_src.clkr,
+};
+
+static struct gdsc *video_cc_sm8750_gdscs[] = {
+	[VIDEO_CC_MVS0_GDSC] = &video_cc_mvs0_gdsc,
+	[VIDEO_CC_MVS0C_GDSC] = &video_cc_mvs0c_gdsc,
+};
+
+static const struct qcom_reset_map video_cc_sm8750_resets[] = {
+	[VIDEO_CC_INTERFACE_BCR] = { 0x80a0 },
+	[VIDEO_CC_MVS0_BCR] = { 0x8064 },
+	[VIDEO_CC_MVS0C_CLK_ARES] = { 0x804c, 2 },
+	[VIDEO_CC_MVS0C_BCR] = { 0x8030 },
+	[VIDEO_CC_MVS0_FREERUN_CLK_ARES] = { 0x808c, 2 },
+	[VIDEO_CC_MVS0C_FREERUN_CLK_ARES] = { 0x805c, 2 },
+	[VIDEO_CC_XO_CLK_ARES] = { 0x80d4, 2 },
+};
+
+static const struct regmap_config video_cc_sm8750_regmap_config = {
+	.reg_bits = 32,
+	.reg_stride = 4,
+	.val_bits = 32,
+	.max_register = 0x9f4c,
+	.fast_io = true,
+};
+
+static struct qcom_cc_desc video_cc_sm8750_desc = {
+	.config = &video_cc_sm8750_regmap_config,
+	.clks = video_cc_sm8750_clocks,
+	.num_clks = ARRAY_SIZE(video_cc_sm8750_clocks),
+	.resets = video_cc_sm8750_resets,
+	.num_resets = ARRAY_SIZE(video_cc_sm8750_resets),
+	.gdscs = video_cc_sm8750_gdscs,
+	.num_gdscs = ARRAY_SIZE(video_cc_sm8750_gdscs),
+};
+
+static const struct of_device_id video_cc_sm8750_match_table[] = {
+	{ .compatible = "qcom,sm8750-videocc" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, video_cc_sm8750_match_table);
+
+static int video_cc_sm8750_probe(struct platform_device *pdev)
+{
+	struct regmap *regmap;
+	int ret;
+
+	ret = devm_pm_runtime_enable(&pdev->dev);
+	if (ret)
+		return ret;
+
+	ret = pm_runtime_resume_and_get(&pdev->dev);
+	if (ret)
+		return ret;
+
+	regmap = qcom_cc_map(pdev, &video_cc_sm8750_desc);
+	if (IS_ERR(regmap)) {
+		pm_runtime_put(&pdev->dev);
+		return PTR_ERR(regmap);
+	}
+
+	clk_taycan_elu_pll_configure(&video_cc_pll0, regmap, &video_cc_pll0_config);
+
+	/* Update DLY_ACCU_RED_SHIFTER_DONE to 0xF for mvs0, mvs0c */
+	regmap_update_bits(regmap, 0x8074, 0x1e00000, 0x1e00000);
+	regmap_update_bits(regmap, 0x8040, 0x1e00000, 0x1e00000);
+
+	regmap_update_bits(regmap, 0x9f24, BIT(0), BIT(0));
+
+	/*
+	 * Keep clocks always enabled:
+	 *	video_cc_ahb_clk
+	 *	video_cc_sleep_clk
+	 *	video_cc_xo_clk
+	 */
+	regmap_update_bits(regmap, 0x80a4, BIT(0), BIT(0));
+	regmap_update_bits(regmap, 0x80f8, BIT(0), BIT(0));
+	regmap_update_bits(regmap, 0x80d4, BIT(0), BIT(0));
+
+	ret = qcom_cc_really_probe(&pdev->dev, &video_cc_sm8750_desc, regmap);
+
+	pm_runtime_put(&pdev->dev);
+
+	return ret;
+}
+
+static struct platform_driver video_cc_sm8750_driver = {
+	.probe = video_cc_sm8750_probe,
+	.driver = {
+		.name = "video_cc-sm8750",
+		.of_match_table = video_cc_sm8750_match_table,
+	},
+};
+
+static int __init video_cc_sm8750_init(void)
+{
+	return platform_driver_register(&video_cc_sm8750_driver);
+}
+subsys_initcall(video_cc_sm8750_init);
+
+static void __exit video_cc_sm8750_exit(void)
+{
+	platform_driver_unregister(&video_cc_sm8750_driver);
+}
+module_exit(video_cc_sm8750_exit);
+
+MODULE_DESCRIPTION("QTI VIDEO_CC SM8750 Driver");
+MODULE_LICENSE("GPL");

-- 
2.34.1

Re: [PATCH v2 3/3] clk: qcom: videocc-sm8750: Add video clock controller driver for SM8750

[Konrad Dybcio]

On 8/29/25 12:15 PM, Taniya Das wrote:
> Add support for the video clock controller for video clients to be able
> to request for videocc clocks on SM8750 platform.
> 
> Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
> ---

[...]

> +static int video_cc_sm8750_probe(struct platform_device *pdev)
> +{
> +	struct regmap *regmap;
> +	int ret;
> +
> +	ret = devm_pm_runtime_enable(&pdev->dev);
> +	if (ret)
> +		return ret;
> +
> +	ret = pm_runtime_resume_and_get(&pdev->dev);
> +	if (ret)
> +		return ret;
> +
> +	regmap = qcom_cc_map(pdev, &video_cc_sm8750_desc);
> +	if (IS_ERR(regmap)) {
> +		pm_runtime_put(&pdev->dev);
> +		return PTR_ERR(regmap);
> +	}
> +
> +	clk_taycan_elu_pll_configure(&video_cc_pll0, regmap, &video_cc_pll0_config);
> +
> +	/* Update DLY_ACCU_RED_SHIFTER_DONE to 0xF for mvs0, mvs0c */
> +	regmap_update_bits(regmap, 0x8074, 0x1e00000, 0x1e00000);

regmap_update_bits(..., GENMASK(x, y) /* full field width */, 0xf)

would be easier for the next person to check against docs in case this
needs to ever change or be validated
> +	regmap_update_bits(regmap, 0x8040, 0x1e00000, 0x1e00000);
> +
> +	regmap_update_bits(regmap, 0x9f24, BIT(0), BIT(0));

The register description mentions a ticket which I believe says this
is not necessary in production hardware

> +
> +	/*
> +	 * Keep clocks always enabled:
> +	 *	video_cc_ahb_clk
> +	 *	video_cc_sleep_clk
> +	 *	video_cc_xo_clk
> +	 */
> +	regmap_update_bits(regmap, 0x80a4, BIT(0), BIT(0));
> +	regmap_update_bits(regmap, 0x80f8, BIT(0), BIT(0));
> +	regmap_update_bits(regmap, 0x80d4, BIT(0), BIT(0));

Please use the new _desc infra

Konrad

Re: [PATCH v2 3/3] clk: qcom: videocc-sm8750: Add video clock controller driver for SM8750

[Taniya Das]

On 9/12/2025 4:38 PM, Konrad Dybcio wrote:
> On 8/29/25 12:15 PM, Taniya Das wrote:
>> Add support for the video clock controller for video clients to be able
>> to request for videocc clocks on SM8750 platform.
>>
>> Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
>> ---
> 
> [...]
> 
>> +static int video_cc_sm8750_probe(struct platform_device *pdev)
>> +{
>> +	struct regmap *regmap;
>> +	int ret;
>> +
>> +	ret = devm_pm_runtime_enable(&pdev->dev);
>> +	if (ret)
>> +		return ret;
>> +
>> +	ret = pm_runtime_resume_and_get(&pdev->dev);
>> +	if (ret)
>> +		return ret;
>> +
>> +	regmap = qcom_cc_map(pdev, &video_cc_sm8750_desc);
>> +	if (IS_ERR(regmap)) {
>> +		pm_runtime_put(&pdev->dev);
>> +		return PTR_ERR(regmap);
>> +	}
>> +
>> +	clk_taycan_elu_pll_configure(&video_cc_pll0, regmap, &video_cc_pll0_config);
>> +
>> +	/* Update DLY_ACCU_RED_SHIFTER_DONE to 0xF for mvs0, mvs0c */
>> +	regmap_update_bits(regmap, 0x8074, 0x1e00000, 0x1e00000);
> 
> regmap_update_bits(..., GENMASK(x, y) /* full field width */, 0xf)

Sure, Konrad, will update the change.

> 
> would be easier for the next person to check against docs in case this
> needs to ever change or be validated
>> +	regmap_update_bits(regmap, 0x8040, 0x1e00000, 0x1e00000);
>> +
>> +	regmap_update_bits(regmap, 0x9f24, BIT(0), BIT(0));
> 
> The register description mentions a ticket which I believe says this
> is not necessary in production hardware
> 

It is required on production hardware as well.

>> +
>> +	/*
>> +	 * Keep clocks always enabled:
>> +	 *	video_cc_ahb_clk
>> +	 *	video_cc_sleep_clk
>> +	 *	video_cc_xo_clk
>> +	 */
>> +	regmap_update_bits(regmap, 0x80a4, BIT(0), BIT(0));
>> +	regmap_update_bits(regmap, 0x80f8, BIT(0), BIT(0));
>> +	regmap_update_bits(regmap, 0x80d4, BIT(0), BIT(0));
> 
> Please use the new _desc infra
> 
> Konrad

Yes, will migrate to use the _desc infra.

-- 
Thanks,
Taniya Das