public inbox for linux-clk@vger.kernel.org
 help / color / mirror / Atom feed
From: Maxime Ripard <maxime@cerno.tech>
To: Mike Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@kernel.org>,
	linux-clk@vger.kernel.org
Cc: Naresh Kamboju <naresh.kamboju@linaro.org>,
	Alexander Stein <alexander.stein@ew.tq-group.com>,
	Marek Szyprowski <m.szyprowski@samsung.com>,
	Tony Lindgren <tony@atomide.com>,
	Jerome Brunet <jbrunet@baylibre.com>,
	Yassine Oudjana <y.oudjana@protonmail.com>,
	Neil Armstrong <narmstrong@baylibre.com>,
	Maxime Ripard <maxime@cerno.tech>
Subject: [PATCH 08/22] clk: Take into account uncached clocks in clk_set_rate_range()
Date: Fri,  8 Apr 2022 11:10:23 +0200	[thread overview]
Message-ID: <20220408091037.2041955-9-maxime@cerno.tech> (raw)
In-Reply-To: <20220408091037.2041955-1-maxime@cerno.tech>

clk_set_rate_range() will use the last requested rate for the clock when
it calls into the driver set_rate hook.

However, if CLK_GET_RATE_NOCACHE is set on that clock, the last
requested rate might not be matching the current rate of the clock. In
such a case, let's read out the rate from the hardware and use that in
our set_rate instead.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/clk/clk.c      |  6 +++++-
 drivers/clk/clk_test.c | 28 ++++++++++++++++++++++++++++
 2 files changed, 33 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index 4ccf52d31a21..80eebf62d1f3 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -2367,6 +2367,10 @@ static int clk_set_rate_range_nolock(struct clk *clk,
 		goto out;
 	}
 
+	rate = clk->core->req_rate;
+	if (clk->core->flags & CLK_GET_RATE_NOCACHE)
+		rate = clk_core_get_rate_recalc(clk->core);
+
 	/*
 	 * Since the boundaries have been changed, let's give the
 	 * opportunity to the provider to adjust the clock rate based on
@@ -2384,7 +2388,7 @@ static int clk_set_rate_range_nolock(struct clk *clk,
 	 * - the determine_rate() callback does not really check for
 	 *   this corner case when determining the rate
 	 */
-	rate = clamp(clk->core->req_rate, min, max);
+	rate = clamp(rate, min, max);
 	ret = clk_core_set_rate_nolock(clk->core, rate);
 	if (ret) {
 		/* rollback the changes */
diff --git a/drivers/clk/clk_test.c b/drivers/clk/clk_test.c
index f51a9ec3e452..70fee35c43c6 100644
--- a/drivers/clk/clk_test.c
+++ b/drivers/clk/clk_test.c
@@ -362,9 +362,37 @@ static void clk_test_uncached_set_range(struct kunit *test)
 	KUNIT_EXPECT_LE(test, rate, DUMMY_CLOCK_RATE_2);
 }
 
+/*
+ * Test that for an uncached clock, clk_set_rate_range() will work
+ * properly if the rate has changed in hardware.
+ *
+ * In this case, it means that if the rate wasn't initially in the range
+ * we're trying to set, but got changed at some point into the range
+ * without the kernel knowing about it, its rate shouldn't be affected.
+ */
+static void clk_test_uncached_updated_rate_set_range(struct kunit *test)
+{
+	struct clk_dummy_context *ctx = test->priv;
+	struct clk_hw *hw = &ctx->hw;
+	struct clk *clk = hw->clk;
+	unsigned long rate;
+
+	ctx->rate = DUMMY_CLOCK_RATE_1 + 1000;
+	KUNIT_ASSERT_EQ(test,
+			clk_set_rate_range(clk,
+					   DUMMY_CLOCK_RATE_1,
+					   DUMMY_CLOCK_RATE_2),
+			0);
+
+	rate = clk_get_rate(clk);
+	KUNIT_ASSERT_GT(test, rate, 0);
+	KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_1 + 1000);
+}
+
 static struct kunit_case clk_uncached_test_cases[] = {
 	KUNIT_CASE(clk_test_uncached_get_rate),
 	KUNIT_CASE(clk_test_uncached_set_range),
+	KUNIT_CASE(clk_test_uncached_updated_rate_set_range),
 	{}
 };
 
-- 
2.35.1


  parent reply	other threads:[~2022-04-08  9:14 UTC|newest]

Thread overview: 53+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-04-08  9:10 [PATCH 00/22] clk: More clock rate fixes and tests Maxime Ripard
2022-04-08  9:10 ` [PATCH 01/22] clk: Drop the rate range on clk_put() Maxime Ripard
2022-04-08  9:10 ` [PATCH 02/22] clk: tests: Add test suites description Maxime Ripard
2022-04-23  4:06   ` Stephen Boyd
2022-04-08  9:10 ` [PATCH 03/22] clk: tests: Add reference to the orphan mux bug report Maxime Ripard
2022-04-08  9:10 ` [PATCH 04/22] clk: tests: Add tests for uncached clock Maxime Ripard
2022-04-08  9:10 ` [PATCH 05/22] clk: tests: Add tests for single parent mux Maxime Ripard
2022-04-08  9:10 ` [PATCH 06/22] clk: tests: Add tests for mux with multiple parents Maxime Ripard
2022-04-08  9:10 ` [PATCH 07/22] clk: tests: Add some tests for orphan " Maxime Ripard
2022-04-08  9:10 ` Maxime Ripard [this message]
2022-04-08  9:10 ` [PATCH 09/22] clk: Fix clk_get_parent() documentation Maxime Ripard
2022-04-08  9:10 ` [PATCH 10/22] clk: Set req_rate on reparenting Maxime Ripard
2022-04-08  9:10 ` [PATCH 11/22] clk: Skip set_rate_range if our clock is orphan Maxime Ripard
2022-04-08  9:10 ` [PATCH 12/22] clk: Add our request boundaries in clk_core_init_rate_req Maxime Ripard
2022-04-08  9:10 ` [PATCH 13/22] clk: Change clk_core_init_rate_req prototype Maxime Ripard
2022-04-08  9:10 ` [PATCH 14/22] clk: Introduce clk_hw_init_rate_request() Maxime Ripard
2022-04-23  3:46   ` Stephen Boyd
2022-04-23  7:17     ` Maxime Ripard
2022-04-08  9:10 ` [PATCH 15/22] clk: Add missing clk_core_init_rate_req calls Maxime Ripard
2022-04-23  3:51   ` Stephen Boyd
2022-04-23  7:32     ` Maxime Ripard
2022-04-08  9:10 ` [PATCH 16/22] clk: Remove redundant clk_core_init_rate_req() call Maxime Ripard
2022-04-23  4:02   ` Stephen Boyd
2022-04-23  7:44     ` Maxime Ripard
2022-04-08  9:10 ` [PATCH 17/22] clk: Switch from __clk_determine_rate to clk_core_round_rate_nolock Maxime Ripard
2022-04-08  9:10 ` [PATCH 18/22] clk: Introduce clk_core_has_parent() Maxime Ripard
2022-04-08  9:10 ` [PATCH 19/22] clk: Stop forwarding clk_rate_requests to the parent Maxime Ripard
2022-04-08  9:10 ` [PATCH 20/22] clk: Zero the clk_rate_request structure Maxime Ripard
2022-04-08  9:10 ` [PATCH 21/22] clk: Test the clock pointer in clk_hw_get_name() Maxime Ripard
2022-04-08  9:10 ` [PATCH 22/22] clk: Prevent a clock without a rate to register Maxime Ripard
2022-04-08  9:18   ` Jerome Brunet
2022-04-08 10:41     ` Maxime Ripard
2022-04-08 11:24       ` Jerome Brunet
2022-04-08 12:55         ` Maxime Ripard
2022-04-08 14:48           ` Jerome Brunet
2022-04-08 15:36             ` Maxime Ripard
2022-04-11  7:40               ` Neil Armstrong
2022-04-12 12:56                 ` Maxime Ripard
2022-04-11  8:20               ` Jerome Brunet
2022-04-23  4:42       ` Stephen Boyd
2022-04-23  9:17         ` Maxime Ripard
2022-04-29  2:08           ` Stephen Boyd
2022-04-29 15:45             ` Maxime Ripard
2022-04-08 12:17     ` Marek Szyprowski
2022-04-08 12:25       ` Maxime Ripard
2022-04-08 13:46         ` Marek Szyprowski
2022-04-23  4:12   ` Stephen Boyd
2022-04-23  7:49     ` Maxime Ripard
2022-04-10 12:06 ` [PATCH 00/22] clk: More clock rate fixes and tests Yassine Oudjana
2022-04-11 11:39   ` Maxime Ripard
2022-04-11  6:25 ` (EXT) " Alexander Stein
2022-04-11  7:24   ` Alexander Stein
2022-04-11 11:54     ` Maxime Ripard

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220408091037.2041955-9-maxime@cerno.tech \
    --to=maxime@cerno.tech \
    --cc=alexander.stein@ew.tq-group.com \
    --cc=jbrunet@baylibre.com \
    --cc=linux-clk@vger.kernel.org \
    --cc=m.szyprowski@samsung.com \
    --cc=mturquette@baylibre.com \
    --cc=naresh.kamboju@linaro.org \
    --cc=narmstrong@baylibre.com \
    --cc=sboyd@kernel.org \
    --cc=tony@atomide.com \
    --cc=y.oudjana@protonmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox