Re: [PATCH v3 15/18] arm64: dts: qcom: Add MXC power domain to videocc node on SM8650

[Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>]

On 4/1/25 5:27 PM, Konrad Dybcio wrote:
> On 3/27/25 10:52 AM, Jagadeesh Kona wrote:
>> Videocc requires both MMCX and MXC rails to be powered ON to configure
>> the video PLLs on SM8650 platform. Hence add MXC power domain to videocc
>> node on SM8650.
>>
>> Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com>
>> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
>> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
>> ---
>>  arch/arm64/boot/dts/qcom/sm8650.dtsi | 3 ++-
>>  1 file changed, 2 insertions(+), 1 deletion(-)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/sm8650.dtsi b/arch/arm64/boot/dts/qcom/sm8650.dtsi
>> index 818db6ba3b3be99c187512ea4acf2004422f6a18..ad60596b71d25bb0198b26660dc41195a1210a23 100644
>> --- a/arch/arm64/boot/dts/qcom/sm8650.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/sm8650.dtsi
>> @@ -4959,7 +4959,8 @@ videocc: clock-controller@aaf0000 {
>>  			reg = <0 0x0aaf0000 0 0x10000>;
>>  			clocks = <&bi_tcxo_div2>,
>>  				 <&gcc GCC_VIDEO_AHB_CLK>;
>> -			power-domains = <&rpmhpd RPMHPD_MMCX>;
>> +			power-domains = <&rpmhpd RPMHPD_MMCX>,
>> +					<&rpmhpd RPMHPD_MXC>;
> 
> So all other DTs touched in this series reference low_svs in required-opps

actually "all" is wrong on my side, please also consider and if necessary apply
the same change to patch 18

Konrad

> 
> Is that an actual requirement? Otherwise since Commit e3e56c050ab6
> ("soc: qcom: rpmhpd: Make power_on actually enable the domain") we get the
> first nonzero state, which can be something like low_svs_d2
> 
> Konrad