From: Dave Jiang <dave.jiang@intel.com>
To: Terry Bowman <terry.bowman@amd.com>, <alison.schofield@intel.com>,
<vishal.l.verma@intel.com>, <ira.weiny@intel.com>,
<bwidawsk@kernel.org>, <dan.j.williams@intel.com>,
<Jonathan.Cameron@huawei.com>, <linux-cxl@vger.kernel.org>
Cc: <rrichter@amd.com>, <linux-kernel@vger.kernel.org>,
<bhelgaas@google.com>
Subject: Re: [PATCH v6 10/27] cxl/acpi: Directly bind the CEDT detected CHBCR to the Host Bridge's port
Date: Thu, 22 Jun 2023 16:28:49 -0700 [thread overview]
Message-ID: <0a5ee5c3-5850-92b0-dbe1-dded3ec5d0f8@intel.com> (raw)
In-Reply-To: <20230622035126.4130151-11-terry.bowman@amd.com>
On 6/21/23 20:51, Terry Bowman wrote:
> From: Robert Richter <rrichter@amd.com>
>
> During a Host Bridge's downstream port enumeration the CHBS entries in
> the CEDT table are parsed, its Component Register base address
> extracted and then stored in struct cxl_dport. The CHBS may contain
> either the RCRB (RCH mode) or the Host Bridge's Component Registers
> (CHBCR, VH mode). The RCRB further contains the CXL downstream port
> register base address, while in VH mode the CXL Downstream Switch
> Ports are visible in the PCI hierarchy and the DP's component regs are
> disovered using the CXL DVSEC register locator capability. The
s/disovered/discovered/
> Component Registers derived from the CHBS for both modes are different
> and thus also must be treated differently. That is, in RCH mode, the
> component regs base should be bound to the dport, but in VH mode to
> the CXL host bridge's port object.
>
> The current implementation stores the CHBCR in addition in struct
> cxl_dport and copies it later from there to struct cxl_port. As a
> result, the dport contains the wrong Component Registers base address
> and, e.g. the RAS capability of a CXL Root Port cannot be detected.
>
> To fix the CHBCR binding, attach it directly to the Host Bridge's
> @cxl_port structure. Do this during port creation of the Host Bridge
> in add_host_bridge_uport(). Factor out CHBS parsing code in
> add_host_bridge_dport() and use it in both functions.
>
> Co-developed-by: Dan Williams <dan.j.williams@intel.com>
> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
> Signed-off-by: Robert Richter <rrichter@amd.com>
> Signed-off-by: Terry Bowman <terry.bowman@amd.com>
> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
> ---
> drivers/cxl/acpi.c | 91 ++++++++++++++++++++++++++++++++--------------
> 1 file changed, 63 insertions(+), 28 deletions(-)
>
> diff --git a/drivers/cxl/acpi.c b/drivers/cxl/acpi.c
> index 0c975ee684b0..89ee01323d43 100644
> --- a/drivers/cxl/acpi.c
> +++ b/drivers/cxl/acpi.c
> @@ -335,13 +335,13 @@ struct cxl_chbs_context {
> u32 cxl_version;
> };
>
> -static int cxl_get_chbs(union acpi_subtable_headers *header, void *arg,
> - const unsigned long end)
> +static int cxl_get_chbs_iter(union acpi_subtable_headers *header, void *arg,
> + const unsigned long end)
> {
> struct cxl_chbs_context *ctx = arg;
> struct acpi_cedt_chbs *chbs;
>
> - if (ctx->base)
> + if (ctx->base != CXL_RESOURCE_NONE)
> return 0;
>
> chbs = (struct acpi_cedt_chbs *) header;
> @@ -350,8 +350,6 @@ static int cxl_get_chbs(union acpi_subtable_headers *header, void *arg,
> return 0;
>
> ctx->cxl_version = chbs->cxl_version;
> - ctx->base = CXL_RESOURCE_NONE;
> -
> if (!chbs->base)
> return 0;
>
> @@ -364,11 +362,35 @@ static int cxl_get_chbs(union acpi_subtable_headers *header, void *arg,
> return 0;
> }
>
> +static int cxl_get_chbs(struct device *dev, struct acpi_device *hb,
> + struct cxl_chbs_context *ctx)
> +{
> + unsigned long long uid;
> + int rc;
> +
> + rc = acpi_evaluate_integer(hb->handle, METHOD_NAME__UID, NULL, &uid);
> + if (rc != AE_OK) {
> + dev_err(dev, "unable to retrieve _UID\n");
> + return -ENOENT;
> + }
> +
> + dev_dbg(dev, "UID found: %lld\n", uid);
> + *ctx = (struct cxl_chbs_context) {
> + .dev = dev,
> + .uid = uid,
> + .base = CXL_RESOURCE_NONE,
> + .cxl_version = UINT_MAX,
> + };
> +
> + acpi_table_parse_cedt(ACPI_CEDT_TYPE_CHBS, cxl_get_chbs_iter, ctx);
> +
> + return 0;
> +}
> +
> static int add_host_bridge_dport(struct device *match, void *arg)
> {
> acpi_status rc;
> struct device *bridge;
> - unsigned long long uid;
> struct cxl_dport *dport;
> struct cxl_chbs_context ctx;
> struct acpi_pci_root *pci_root;
> @@ -379,41 +401,38 @@ static int add_host_bridge_dport(struct device *match, void *arg)
> if (!hb)
> return 0;
>
> - rc = acpi_evaluate_integer(hb->handle, METHOD_NAME__UID, NULL, &uid);
> - if (rc != AE_OK) {
> - dev_err(match, "unable to retrieve _UID\n");
> - return -ENODEV;
> - }
> -
> - dev_dbg(match, "UID found: %lld\n", uid);
> -
> - ctx = (struct cxl_chbs_context) {
> - .dev = match,
> - .uid = uid,
> - };
> - acpi_table_parse_cedt(ACPI_CEDT_TYPE_CHBS, cxl_get_chbs, &ctx);
> + rc = cxl_get_chbs(match, hb, &ctx);
> + if (rc)
> + return rc;
>
> - if (!ctx.base) {
> + if (ctx.cxl_version == UINT_MAX) {
> dev_warn(match, "No CHBS found for Host Bridge (UID %lld)\n",
> - uid);
> + ctx.uid);
> return 0;
> }
>
> if (ctx.base == CXL_RESOURCE_NONE) {
> dev_warn(match, "CHBS invalid for Host Bridge (UID %lld)\n",
> - uid);
> + ctx.uid);
> return 0;
> }
>
> pci_root = acpi_pci_find_root(hb->handle);
> bridge = pci_root->bus->bridge;
>
> + /*
> + * In RCH mode, bind the component regs base to the dport. In
> + * VH mode it will be bound to the CXL host bridge's port
> + * object later in add_host_bridge_uport().
> + */
> if (ctx.cxl_version == ACPI_CEDT_CHBS_VERSION_CXL11) {
> - dev_dbg(match, "RCRB found for UID %lld: %pa\n", uid, &ctx.base);
> - dport = devm_cxl_add_rch_dport(root_port, bridge, uid, ctx.base);
> + dev_dbg(match, "RCRB found for UID %lld: %pa\n", ctx.uid,
> + &ctx.base);
> + dport = devm_cxl_add_rch_dport(root_port, bridge, ctx.uid,
> + ctx.base);
> } else {
> - dev_dbg(match, "CHBCR found for UID %lld: %pa\n", uid, &ctx.base);
> - dport = devm_cxl_add_dport(root_port, bridge, uid, ctx.base);
> + dport = devm_cxl_add_dport(root_port, bridge, ctx.uid,
> + CXL_RESOURCE_NONE);
> }
>
> if (IS_ERR(dport))
> @@ -435,6 +454,8 @@ static int add_host_bridge_uport(struct device *match, void *arg)
> struct cxl_dport *dport;
> struct cxl_port *port;
> struct device *bridge;
> + struct cxl_chbs_context ctx;
> + resource_size_t component_reg_phys;
> int rc;
>
> if (!hb)
> @@ -453,12 +474,26 @@ static int add_host_bridge_uport(struct device *match, void *arg)
> return 0;
> }
>
> + rc = cxl_get_chbs(match, hb, &ctx);
> + if (rc)
> + return rc;
> +
> + if (ctx.cxl_version == ACPI_CEDT_CHBS_VERSION_CXL11) {
> + dev_warn(bridge,
> + "CXL CHBS version mismatch, skip port registration\n");
> + return 0;
> + }
> +
> + component_reg_phys = ctx.base;
> + if (component_reg_phys != CXL_RESOURCE_NONE)
> + dev_dbg(match, "CHBCR found for UID %lld: %pa\n",
> + ctx.uid, &component_reg_phys);
> +
> rc = devm_cxl_register_pci_bus(host, bridge, pci_root->bus);
> if (rc)
> return rc;
>
> - port = devm_cxl_add_port(host, bridge, dport->component_reg_phys,
> - dport);
> + port = devm_cxl_add_port(host, bridge, component_reg_phys, dport);
> if (IS_ERR(port))
> return PTR_ERR(port);
>
next prev parent reply other threads:[~2023-06-22 23:29 UTC|newest]
Thread overview: 63+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-06-22 3:50 [PATCH v6 00/27] cxl/pci: Add support for RCH RAS error handling Terry Bowman
2023-06-22 3:51 ` [PATCH v6 01/27] cxl/port: Fix NULL pointer access in devm_cxl_add_port() Terry Bowman
2023-06-22 7:17 ` Robert Richter
2023-06-22 3:51 ` [PATCH v6 02/27] cxl/acpi: Probe RCRB later during RCH downstream port creation Terry Bowman
2023-06-22 22:36 ` Dave Jiang
2023-06-22 3:51 ` [PATCH v6 03/27] cxl: Updates for CXL Test to work with RCH Terry Bowman
2023-06-22 9:53 ` Jonathan Cameron
2023-06-22 10:03 ` Robert Richter
2023-06-22 14:02 ` Terry Bowman
2023-06-22 22:38 ` Dave Jiang
2023-06-22 3:51 ` [PATCH v6 04/27] cxl/rch: Prepare for caching the MMIO mapped PCIe AER capability Terry Bowman
2023-06-22 22:51 ` Dave Jiang
2023-06-22 3:51 ` [PATCH v6 05/27] cxl: Rename member @dport of struct cxl_dport to @dport_dev Terry Bowman
2023-06-22 9:54 ` Jonathan Cameron
2023-06-22 22:53 ` Dave Jiang
2023-06-22 3:51 ` [PATCH v6 06/27] cxl: Rename 'uport' to 'uport_dev' Terry Bowman
2023-06-22 9:56 ` Jonathan Cameron
2023-06-22 22:54 ` Dave Jiang
2023-06-22 3:51 ` [PATCH v6 07/27] cxl/core/regs: Add @dev to cxl_register_map Terry Bowman
2023-06-22 11:14 ` Jonathan Cameron
2023-06-22 23:07 ` Dave Jiang
2023-06-22 3:51 ` [PATCH v6 08/27] cxl/pci: Refactor component register discovery for reuse Terry Bowman
2023-06-22 23:14 ` Dave Jiang
2023-06-22 3:51 ` [PATCH v6 09/27] cxl/acpi: Move add_host_bridge_uport() after cxl_get_chbs() Terry Bowman
2023-06-22 23:17 ` Dave Jiang
2023-06-22 3:51 ` [PATCH v6 10/27] cxl/acpi: Directly bind the CEDT detected CHBCR to the Host Bridge's port Terry Bowman
2023-06-22 23:28 ` Dave Jiang [this message]
2023-06-22 3:51 ` [PATCH v6 11/27] cxl/port: Remove Component Register base address from struct cxl_dport Terry Bowman
2023-06-22 23:47 ` Dave Jiang
2023-06-22 3:51 ` [PATCH v6 12/27] cxl/regs: Remove early capability checks in Component Register setup Terry Bowman
2023-06-22 23:48 ` Dave Jiang
2023-06-22 3:51 ` [PATCH v6 13/27] cxl/mem: Prepare for early RCH dport component register setup Terry Bowman
2023-06-22 11:17 ` Jonathan Cameron
2023-06-22 23:50 ` Dave Jiang
2023-06-22 3:51 ` [PATCH v6 14/27] cxl/pci: Early setup RCH dport component registers from RCRB Terry Bowman
2023-06-22 23:58 ` Dave Jiang
2023-06-22 3:51 ` [PATCH v6 15/27] cxl/port: Store the port's Component Register mappings in struct cxl_port Terry Bowman
2023-06-22 13:20 ` Jonathan Cameron
2023-06-23 0:00 ` Dave Jiang
2023-06-22 3:51 ` [PATCH v6 16/27] cxl/port: Store the downstream port's Component Register mappings in struct cxl_dport Terry Bowman
2023-06-23 0:01 ` Dave Jiang
2023-06-22 3:51 ` [PATCH v6 17/27] cxl/pci: Store the endpoint's Component Register mappings in struct cxl_dev_state Terry Bowman
2023-06-23 0:02 ` Dave Jiang
2023-06-22 3:51 ` [PATCH v6 18/27] cxl/hdm: Use stored Component Register mappings to map HDM decoder capability Terry Bowman
2023-06-23 0:03 ` Dave Jiang
2023-06-22 3:51 ` [PATCH v6 19/27] cxl/port: Remove Component Register base address from struct cxl_port Terry Bowman
2023-06-23 0:04 ` Dave Jiang
2023-06-22 3:51 ` [PATCH v6 20/27] cxl/pci: Add RCH downstream port AER register discovery Terry Bowman
2023-06-22 13:17 ` Jonathan Cameron
2023-06-23 0:10 ` Dave Jiang
2023-06-22 3:51 ` [PATCH v6 21/27] PCI/AER: Refactor cper_print_aer() for use by CXL driver module Terry Bowman
2023-06-22 3:51 ` [PATCH v6 22/27] cxl/pci: Update CXL error logging to use RAS register address Terry Bowman
2023-06-22 3:51 ` [PATCH v6 23/27] cxl/pci: Map RCH downstream AER registers for logging protocol errors Terry Bowman
2023-06-22 13:16 ` Jonathan Cameron
2023-06-22 14:42 ` Terry Bowman
2023-06-22 3:51 ` [PATCH v6 24/27] cxl/pci: Add RCH downstream port error logging Terry Bowman
2023-06-22 3:51 ` [PATCH v6 25/27] cxl/pci: Disable root port interrupts in RCH mode Terry Bowman
2023-06-22 13:12 ` Jonathan Cameron
2023-06-22 16:33 ` Terry Bowman
2023-06-23 13:28 ` Jonathan Cameron
2023-06-22 3:51 ` [PATCH v6 26/27] PCI/AER: Forward RCH downstream port-detected errors to the CXL.mem dev handler Terry Bowman
2023-06-22 3:51 ` [PATCH v6 27/27] PCI/AER: Unmask RCEC internal errors to enable RCH downstream port error handling Terry Bowman
2023-06-22 13:07 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=0a5ee5c3-5850-92b0-dbe1-dded3ec5d0f8@intel.com \
--to=dave.jiang@intel.com \
--cc=Jonathan.Cameron@huawei.com \
--cc=alison.schofield@intel.com \
--cc=bhelgaas@google.com \
--cc=bwidawsk@kernel.org \
--cc=dan.j.williams@intel.com \
--cc=ira.weiny@intel.com \
--cc=linux-cxl@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=rrichter@amd.com \
--cc=terry.bowman@amd.com \
--cc=vishal.l.verma@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox