Linux CXL
 help / color / mirror / Atom feed
From: Dave Jiang <dave.jiang@intel.com>
To: Terry Bowman <terry.bowman@amd.com>, <alison.schofield@intel.com>,
	<vishal.l.verma@intel.com>, <ira.weiny@intel.com>,
	<bwidawsk@kernel.org>, <dan.j.williams@intel.com>,
	<Jonathan.Cameron@huawei.com>, <linux-cxl@vger.kernel.org>
Cc: <rrichter@amd.com>, <linux-kernel@vger.kernel.org>,
	<bhelgaas@google.com>
Subject: Re: [PATCH v6 15/27] cxl/port: Store the port's Component Register mappings in struct cxl_port
Date: Thu, 22 Jun 2023 17:00:54 -0700	[thread overview]
Message-ID: <67068bf5-c96c-6de1-d6cb-9ad4dd524701@intel.com> (raw)
In-Reply-To: <20230622035126.4130151-16-terry.bowman@amd.com>



On 6/21/23 20:51, Terry Bowman wrote:
> From: Robert Richter <rrichter@amd.com>
> 
> CXL capabilities are stored in the Component Registers. To use them,
> the specific I/O ranges of the capabilities must be determined by
> probing the registers. For this, the whole Component Register range
> needs to be mapped temporarily to detect the offset and length of a
> capability range.
> 
> In order to use more than one capability of a component (e.g. RAS and
> HDM) the Component Register are probed and its mappings created
> multiple times. This also causes overlapping I/O ranges as the whole
> Component Register range must be mapped again while a capability's I/O
> range is already mapped.
> 
> Different capabilities cannot be setup at the same time. E.g. the RAS
> capability must be made available as soon as the PCI driver is bound,
> the HDM decoder is setup later during port enumeration. Moreover,
> during early setup it is still unknown if a certain capability is
> needed. A central capability setup is therefore not possible,
> capabilities must be individually enabled once needed during
> initialization.
> 
> To avoid a duplicate register probe and overlapping I/O mappings, only
> probe the Component Registers one time and store the Component
> Register mapping in struct port. The stored mappings can be used later
> to iomap the capability register range when enabling the capability,
> which will be implemented in a follow-on patch.
> 
> Signed-off-by: Robert Richter <rrichter@amd.com>
> Signed-off-by: Terry Bowman <terry.bowman@amd.com>

Reviewed-by: Dave Jiang <dave.jiang@intel.com>
> ---
>   drivers/cxl/core/port.c | 26 ++++++++++++++++++++++++++
>   drivers/cxl/cxl.h       |  2 ++
>   2 files changed, 28 insertions(+)
> 
> diff --git a/drivers/cxl/core/port.c b/drivers/cxl/core/port.c
> index 679226023f0c..2e239fd33df9 100644
> --- a/drivers/cxl/core/port.c
> +++ b/drivers/cxl/core/port.c
> @@ -688,6 +688,28 @@ static struct cxl_port *cxl_port_alloc(struct device *uport_dev,
>   	return ERR_PTR(rc);
>   }
>   
> +static int cxl_setup_comp_regs(struct device *dev, struct cxl_register_map *map,
> +			       resource_size_t component_reg_phys)
> +{
> +	if (component_reg_phys == CXL_RESOURCE_NONE)
> +		return 0;
> +
> +	memset(map, 0, sizeof(*map));
> +	map->dev = dev;
> +	map->reg_type = CXL_REGLOC_RBI_COMPONENT;
> +	map->resource = component_reg_phys;
> +	map->max_size = CXL_COMPONENT_REG_BLOCK_SIZE;
> +
> +	return cxl_setup_regs(map);
> +}
> +
> +static inline int cxl_port_setup_regs(struct cxl_port *port,
> +				      resource_size_t component_reg_phys)
> +{
> +	return cxl_setup_comp_regs(&port->dev, &port->comp_map,
> +				   component_reg_phys);
> +}
> +
>   static struct cxl_port *__devm_cxl_add_port(struct device *host,
>   					    struct device *uport_dev,
>   					    resource_size_t component_reg_phys,
> @@ -711,6 +733,10 @@ static struct cxl_port *__devm_cxl_add_port(struct device *host,
>   	if (rc)
>   		goto err;
>   
> +	rc = cxl_port_setup_regs(port, component_reg_phys);
> +	if (rc)
> +		goto err;
> +
>   	rc = device_add(dev);
>   	if (rc)
>   		goto err;
> diff --git a/drivers/cxl/cxl.h b/drivers/cxl/cxl.h
> index fe95f08acb69..37fa5b565362 100644
> --- a/drivers/cxl/cxl.h
> +++ b/drivers/cxl/cxl.h
> @@ -547,6 +547,7 @@ struct cxl_dax_region {
>    * @regions: cxl_region_ref instances, regions mapped by this port
>    * @parent_dport: dport that points to this port in the parent
>    * @decoder_ida: allocator for decoder ids
> + * @comp_map: component register capability mappings
>    * @nr_dports: number of entries in @dports
>    * @hdm_end: track last allocated HDM decoder instance for allocation ordering
>    * @commit_end: cursor to track highest committed decoder for commit ordering
> @@ -566,6 +567,7 @@ struct cxl_port {
>   	struct xarray regions;
>   	struct cxl_dport *parent_dport;
>   	struct ida decoder_ida;
> +	struct cxl_register_map comp_map;
>   	int nr_dports;
>   	int hdm_end;
>   	int commit_end;

  parent reply	other threads:[~2023-06-23  0:01 UTC|newest]

Thread overview: 63+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-06-22  3:50 [PATCH v6 00/27] cxl/pci: Add support for RCH RAS error handling Terry Bowman
2023-06-22  3:51 ` [PATCH v6 01/27] cxl/port: Fix NULL pointer access in devm_cxl_add_port() Terry Bowman
2023-06-22  7:17   ` Robert Richter
2023-06-22  3:51 ` [PATCH v6 02/27] cxl/acpi: Probe RCRB later during RCH downstream port creation Terry Bowman
2023-06-22 22:36   ` Dave Jiang
2023-06-22  3:51 ` [PATCH v6 03/27] cxl: Updates for CXL Test to work with RCH Terry Bowman
2023-06-22  9:53   ` Jonathan Cameron
2023-06-22 10:03     ` Robert Richter
2023-06-22 14:02     ` Terry Bowman
2023-06-22 22:38   ` Dave Jiang
2023-06-22  3:51 ` [PATCH v6 04/27] cxl/rch: Prepare for caching the MMIO mapped PCIe AER capability Terry Bowman
2023-06-22 22:51   ` Dave Jiang
2023-06-22  3:51 ` [PATCH v6 05/27] cxl: Rename member @dport of struct cxl_dport to @dport_dev Terry Bowman
2023-06-22  9:54   ` Jonathan Cameron
2023-06-22 22:53   ` Dave Jiang
2023-06-22  3:51 ` [PATCH v6 06/27] cxl: Rename 'uport' to 'uport_dev' Terry Bowman
2023-06-22  9:56   ` Jonathan Cameron
2023-06-22 22:54   ` Dave Jiang
2023-06-22  3:51 ` [PATCH v6 07/27] cxl/core/regs: Add @dev to cxl_register_map Terry Bowman
2023-06-22 11:14   ` Jonathan Cameron
2023-06-22 23:07   ` Dave Jiang
2023-06-22  3:51 ` [PATCH v6 08/27] cxl/pci: Refactor component register discovery for reuse Terry Bowman
2023-06-22 23:14   ` Dave Jiang
2023-06-22  3:51 ` [PATCH v6 09/27] cxl/acpi: Move add_host_bridge_uport() after cxl_get_chbs() Terry Bowman
2023-06-22 23:17   ` Dave Jiang
2023-06-22  3:51 ` [PATCH v6 10/27] cxl/acpi: Directly bind the CEDT detected CHBCR to the Host Bridge's port Terry Bowman
2023-06-22 23:28   ` Dave Jiang
2023-06-22  3:51 ` [PATCH v6 11/27] cxl/port: Remove Component Register base address from struct cxl_dport Terry Bowman
2023-06-22 23:47   ` Dave Jiang
2023-06-22  3:51 ` [PATCH v6 12/27] cxl/regs: Remove early capability checks in Component Register setup Terry Bowman
2023-06-22 23:48   ` Dave Jiang
2023-06-22  3:51 ` [PATCH v6 13/27] cxl/mem: Prepare for early RCH dport component register setup Terry Bowman
2023-06-22 11:17   ` Jonathan Cameron
2023-06-22 23:50   ` Dave Jiang
2023-06-22  3:51 ` [PATCH v6 14/27] cxl/pci: Early setup RCH dport component registers from RCRB Terry Bowman
2023-06-22 23:58   ` Dave Jiang
2023-06-22  3:51 ` [PATCH v6 15/27] cxl/port: Store the port's Component Register mappings in struct cxl_port Terry Bowman
2023-06-22 13:20   ` Jonathan Cameron
2023-06-23  0:00   ` Dave Jiang [this message]
2023-06-22  3:51 ` [PATCH v6 16/27] cxl/port: Store the downstream port's Component Register mappings in struct cxl_dport Terry Bowman
2023-06-23  0:01   ` Dave Jiang
2023-06-22  3:51 ` [PATCH v6 17/27] cxl/pci: Store the endpoint's Component Register mappings in struct cxl_dev_state Terry Bowman
2023-06-23  0:02   ` Dave Jiang
2023-06-22  3:51 ` [PATCH v6 18/27] cxl/hdm: Use stored Component Register mappings to map HDM decoder capability Terry Bowman
2023-06-23  0:03   ` Dave Jiang
2023-06-22  3:51 ` [PATCH v6 19/27] cxl/port: Remove Component Register base address from struct cxl_port Terry Bowman
2023-06-23  0:04   ` Dave Jiang
2023-06-22  3:51 ` [PATCH v6 20/27] cxl/pci: Add RCH downstream port AER register discovery Terry Bowman
2023-06-22 13:17   ` Jonathan Cameron
2023-06-23  0:10   ` Dave Jiang
2023-06-22  3:51 ` [PATCH v6 21/27] PCI/AER: Refactor cper_print_aer() for use by CXL driver module Terry Bowman
2023-06-22  3:51 ` [PATCH v6 22/27] cxl/pci: Update CXL error logging to use RAS register address Terry Bowman
2023-06-22  3:51 ` [PATCH v6 23/27] cxl/pci: Map RCH downstream AER registers for logging protocol errors Terry Bowman
2023-06-22 13:16   ` Jonathan Cameron
2023-06-22 14:42     ` Terry Bowman
2023-06-22  3:51 ` [PATCH v6 24/27] cxl/pci: Add RCH downstream port error logging Terry Bowman
2023-06-22  3:51 ` [PATCH v6 25/27] cxl/pci: Disable root port interrupts in RCH mode Terry Bowman
2023-06-22 13:12   ` Jonathan Cameron
2023-06-22 16:33     ` Terry Bowman
2023-06-23 13:28       ` Jonathan Cameron
2023-06-22  3:51 ` [PATCH v6 26/27] PCI/AER: Forward RCH downstream port-detected errors to the CXL.mem dev handler Terry Bowman
2023-06-22  3:51 ` [PATCH v6 27/27] PCI/AER: Unmask RCEC internal errors to enable RCH downstream port error handling Terry Bowman
2023-06-22 13:07   ` Jonathan Cameron

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=67068bf5-c96c-6de1-d6cb-9ad4dd524701@intel.com \
    --to=dave.jiang@intel.com \
    --cc=Jonathan.Cameron@huawei.com \
    --cc=alison.schofield@intel.com \
    --cc=bhelgaas@google.com \
    --cc=bwidawsk@kernel.org \
    --cc=dan.j.williams@intel.com \
    --cc=ira.weiny@intel.com \
    --cc=linux-cxl@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=rrichter@amd.com \
    --cc=terry.bowman@amd.com \
    --cc=vishal.l.verma@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox