From: Terry Bowman <terry.bowman@amd.com>
To: <alison.schofield@intel.com>, <vishal.l.verma@intel.com>,
<ira.weiny@intel.com>, <bwidawsk@kernel.org>,
<dan.j.williams@intel.com>, <dave.jiang@intel.com>,
<Jonathan.Cameron@huawei.com>, <linux-cxl@vger.kernel.org>
Cc: <terry.bowman@amd.com>, <rrichter@amd.com>,
<linux-kernel@vger.kernel.org>, <bhelgaas@google.com>
Subject: [PATCH v6 16/27] cxl/port: Store the downstream port's Component Register mappings in struct cxl_dport
Date: Wed, 21 Jun 2023 22:51:15 -0500 [thread overview]
Message-ID: <20230622035126.4130151-17-terry.bowman@amd.com> (raw)
In-Reply-To: <20230622035126.4130151-1-terry.bowman@amd.com>
From: Robert Richter <rrichter@amd.com>
Same as for ports, also store the downstream port's Component Register
mappings, use struct cxl_dport for that.
Signed-off-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
drivers/cxl/core/port.c | 11 +++++++++++
drivers/cxl/cxl.h | 2 ++
2 files changed, 13 insertions(+)
diff --git a/drivers/cxl/core/port.c b/drivers/cxl/core/port.c
index 2e239fd33df9..45fe7d89f7f3 100644
--- a/drivers/cxl/core/port.c
+++ b/drivers/cxl/core/port.c
@@ -710,6 +710,13 @@ static inline int cxl_port_setup_regs(struct cxl_port *port,
component_reg_phys);
}
+static inline int cxl_dport_setup_regs(struct cxl_dport *dport,
+ resource_size_t component_reg_phys)
+{
+ return cxl_setup_comp_regs(dport->dport_dev, &dport->comp_map,
+ component_reg_phys);
+}
+
static struct cxl_port *__devm_cxl_add_port(struct device *host,
struct device *uport_dev,
resource_size_t component_reg_phys,
@@ -988,6 +995,10 @@ __devm_cxl_add_dport(struct cxl_port *port, struct device *dport_dev,
dport->port_id = port_id;
dport->port = port;
+ rc = cxl_dport_setup_regs(dport, component_reg_phys);
+ if (rc)
+ return ERR_PTR(rc);
+
cond_cxl_root_lock(port);
rc = add_dport(port, dport);
cond_cxl_root_unlock(port);
diff --git a/drivers/cxl/cxl.h b/drivers/cxl/cxl.h
index 37fa5b565362..b1adca9b27ba 100644
--- a/drivers/cxl/cxl.h
+++ b/drivers/cxl/cxl.h
@@ -595,6 +595,7 @@ struct cxl_rcrb_info {
/**
* struct cxl_dport - CXL downstream port
* @dport_dev: PCI bridge or firmware device representing the downstream link
+ * @comp_map: component register capability mappings
* @port_id: unique hardware identifier for dport in decoder target list
* @rcrb: Data about the Root Complex Register Block layout
* @rch: Indicate whether this dport was enumerated in RCH or VH mode
@@ -602,6 +603,7 @@ struct cxl_rcrb_info {
*/
struct cxl_dport {
struct device *dport_dev;
+ struct cxl_register_map comp_map;
int port_id;
struct cxl_rcrb_info rcrb;
bool rch;
--
2.34.1
next prev parent reply other threads:[~2023-06-22 3:57 UTC|newest]
Thread overview: 63+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-06-22 3:50 [PATCH v6 00/27] cxl/pci: Add support for RCH RAS error handling Terry Bowman
2023-06-22 3:51 ` [PATCH v6 01/27] cxl/port: Fix NULL pointer access in devm_cxl_add_port() Terry Bowman
2023-06-22 7:17 ` Robert Richter
2023-06-22 3:51 ` [PATCH v6 02/27] cxl/acpi: Probe RCRB later during RCH downstream port creation Terry Bowman
2023-06-22 22:36 ` Dave Jiang
2023-06-22 3:51 ` [PATCH v6 03/27] cxl: Updates for CXL Test to work with RCH Terry Bowman
2023-06-22 9:53 ` Jonathan Cameron
2023-06-22 10:03 ` Robert Richter
2023-06-22 14:02 ` Terry Bowman
2023-06-22 22:38 ` Dave Jiang
2023-06-22 3:51 ` [PATCH v6 04/27] cxl/rch: Prepare for caching the MMIO mapped PCIe AER capability Terry Bowman
2023-06-22 22:51 ` Dave Jiang
2023-06-22 3:51 ` [PATCH v6 05/27] cxl: Rename member @dport of struct cxl_dport to @dport_dev Terry Bowman
2023-06-22 9:54 ` Jonathan Cameron
2023-06-22 22:53 ` Dave Jiang
2023-06-22 3:51 ` [PATCH v6 06/27] cxl: Rename 'uport' to 'uport_dev' Terry Bowman
2023-06-22 9:56 ` Jonathan Cameron
2023-06-22 22:54 ` Dave Jiang
2023-06-22 3:51 ` [PATCH v6 07/27] cxl/core/regs: Add @dev to cxl_register_map Terry Bowman
2023-06-22 11:14 ` Jonathan Cameron
2023-06-22 23:07 ` Dave Jiang
2023-06-22 3:51 ` [PATCH v6 08/27] cxl/pci: Refactor component register discovery for reuse Terry Bowman
2023-06-22 23:14 ` Dave Jiang
2023-06-22 3:51 ` [PATCH v6 09/27] cxl/acpi: Move add_host_bridge_uport() after cxl_get_chbs() Terry Bowman
2023-06-22 23:17 ` Dave Jiang
2023-06-22 3:51 ` [PATCH v6 10/27] cxl/acpi: Directly bind the CEDT detected CHBCR to the Host Bridge's port Terry Bowman
2023-06-22 23:28 ` Dave Jiang
2023-06-22 3:51 ` [PATCH v6 11/27] cxl/port: Remove Component Register base address from struct cxl_dport Terry Bowman
2023-06-22 23:47 ` Dave Jiang
2023-06-22 3:51 ` [PATCH v6 12/27] cxl/regs: Remove early capability checks in Component Register setup Terry Bowman
2023-06-22 23:48 ` Dave Jiang
2023-06-22 3:51 ` [PATCH v6 13/27] cxl/mem: Prepare for early RCH dport component register setup Terry Bowman
2023-06-22 11:17 ` Jonathan Cameron
2023-06-22 23:50 ` Dave Jiang
2023-06-22 3:51 ` [PATCH v6 14/27] cxl/pci: Early setup RCH dport component registers from RCRB Terry Bowman
2023-06-22 23:58 ` Dave Jiang
2023-06-22 3:51 ` [PATCH v6 15/27] cxl/port: Store the port's Component Register mappings in struct cxl_port Terry Bowman
2023-06-22 13:20 ` Jonathan Cameron
2023-06-23 0:00 ` Dave Jiang
2023-06-22 3:51 ` Terry Bowman [this message]
2023-06-23 0:01 ` [PATCH v6 16/27] cxl/port: Store the downstream port's Component Register mappings in struct cxl_dport Dave Jiang
2023-06-22 3:51 ` [PATCH v6 17/27] cxl/pci: Store the endpoint's Component Register mappings in struct cxl_dev_state Terry Bowman
2023-06-23 0:02 ` Dave Jiang
2023-06-22 3:51 ` [PATCH v6 18/27] cxl/hdm: Use stored Component Register mappings to map HDM decoder capability Terry Bowman
2023-06-23 0:03 ` Dave Jiang
2023-06-22 3:51 ` [PATCH v6 19/27] cxl/port: Remove Component Register base address from struct cxl_port Terry Bowman
2023-06-23 0:04 ` Dave Jiang
2023-06-22 3:51 ` [PATCH v6 20/27] cxl/pci: Add RCH downstream port AER register discovery Terry Bowman
2023-06-22 13:17 ` Jonathan Cameron
2023-06-23 0:10 ` Dave Jiang
2023-06-22 3:51 ` [PATCH v6 21/27] PCI/AER: Refactor cper_print_aer() for use by CXL driver module Terry Bowman
2023-06-22 3:51 ` [PATCH v6 22/27] cxl/pci: Update CXL error logging to use RAS register address Terry Bowman
2023-06-22 3:51 ` [PATCH v6 23/27] cxl/pci: Map RCH downstream AER registers for logging protocol errors Terry Bowman
2023-06-22 13:16 ` Jonathan Cameron
2023-06-22 14:42 ` Terry Bowman
2023-06-22 3:51 ` [PATCH v6 24/27] cxl/pci: Add RCH downstream port error logging Terry Bowman
2023-06-22 3:51 ` [PATCH v6 25/27] cxl/pci: Disable root port interrupts in RCH mode Terry Bowman
2023-06-22 13:12 ` Jonathan Cameron
2023-06-22 16:33 ` Terry Bowman
2023-06-23 13:28 ` Jonathan Cameron
2023-06-22 3:51 ` [PATCH v6 26/27] PCI/AER: Forward RCH downstream port-detected errors to the CXL.mem dev handler Terry Bowman
2023-06-22 3:51 ` [PATCH v6 27/27] PCI/AER: Unmask RCEC internal errors to enable RCH downstream port error handling Terry Bowman
2023-06-22 13:07 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230622035126.4130151-17-terry.bowman@amd.com \
--to=terry.bowman@amd.com \
--cc=Jonathan.Cameron@huawei.com \
--cc=alison.schofield@intel.com \
--cc=bhelgaas@google.com \
--cc=bwidawsk@kernel.org \
--cc=dan.j.williams@intel.com \
--cc=dave.jiang@intel.com \
--cc=ira.weiny@intel.com \
--cc=linux-cxl@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=rrichter@amd.com \
--cc=vishal.l.verma@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox