From: Ben Widawsky <ben.widawsky@intel.com>
To: linux-cxl@vger.kernel.org, linux-nvdimm@lists.01.org,
linux-pci@vger.kernel.org
Cc: patches@lists.linux.dev, Bjorn Helgaas <helgaas@kernel.org>,
Ben Widawsky <ben.widawsky@intel.com>,
Alison Schofield <alison.schofield@intel.com>,
Dan Williams <dan.j.williams@intel.com>,
Ira Weiny <ira.weiny@intel.com>,
Jonathan Cameron <Jonathan.Cameron@Huawei.com>,
Vishal Verma <vishal.l.verma@intel.com>
Subject: [PATCH 13/13] cxl: Program decoders for regions
Date: Thu, 6 Jan 2022 16:37:56 -0800 [thread overview]
Message-ID: <20220107003756.806582-14-ben.widawsky@intel.com> (raw)
In-Reply-To: <20220107003756.806582-1-ben.widawsky@intel.com>
Do the HDM decoder programming for all endpoints and host bridges in a
region. Switches are currently unimplemented.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
---
drivers/cxl/core/hdm.c | 198 +++++++++++++++++++++++++++++++++++++++++
drivers/cxl/cxl.h | 3 +
drivers/cxl/region.c | 39 +++++++-
3 files changed, 237 insertions(+), 3 deletions(-)
diff --git a/drivers/cxl/core/hdm.c b/drivers/cxl/core/hdm.c
index 44e48cea8cd4..c7293cbd8547 100644
--- a/drivers/cxl/core/hdm.c
+++ b/drivers/cxl/core/hdm.c
@@ -242,3 +242,201 @@ int devm_cxl_enumerate_switch_decoders(struct cxl_port *port)
return 0;
}
EXPORT_SYMBOL_NS_GPL(devm_cxl_enumerate_switch_decoders, CXL);
+
+#define COMMIT_TIMEOUT_MS 10
+static int wait_for_commit(struct cxl_decoder *cxld)
+{
+ struct cxl_port *port = to_cxl_port(cxld->dev.parent);
+ const unsigned long start = jiffies;
+ struct cxl_port_state *cxlps;
+ void __iomem *hdm_decoder;
+ unsigned long end = start;
+ u32 ctrl;
+
+ cxlps = dev_get_drvdata(&port->dev);
+ hdm_decoder = cxlps->regs.hdm_decoder;
+
+ do {
+ end = jiffies;
+ ctrl = readl(hdm_decoder +
+ CXL_HDM_DECODER0_CTRL_OFFSET(cxld->id));
+ if (FIELD_GET(CXL_HDM_DECODER0_CTRL_COMMITTED, ctrl))
+ break;
+
+ if (time_after(end, start + COMMIT_TIMEOUT_MS)) {
+ dev_err(&cxld->dev, "HDM decoder commit timeout %x\n", ctrl);
+ return -ETIMEDOUT;
+ }
+ if ((ctrl & CXL_HDM_DECODER0_CTRL_COMMIT_ERROR) != 0) {
+ dev_err(&cxld->dev, "HDM decoder commit error %x\n", ctrl);
+ return -ENXIO;
+ }
+ } while (FIELD_GET(CXL_HDM_DECODER0_CTRL_COMMITTED, ctrl));
+
+ return 0;
+}
+
+/**
+ * cxl_commit_decoder() - Program a configured cxl_decoder
+ * @cxld: The preconfigured cxl decoder.
+ *
+ * A cxl decoder that is to be committed should have been earmarked as enabled.
+ * This mechanism acts as a soft reservation on the decoder.
+ *
+ * Returns 0 if commit was successful, negative error code otherwise.
+ */
+int cxl_commit_decoder(struct cxl_decoder *cxld)
+{
+ u32 ctrl, tl_lo, tl_hi, base_lo, base_hi, size_lo, size_hi;
+ struct cxl_port *port = to_cxl_port(cxld->dev.parent);
+ struct cxl_port_state *cxlps;
+ void __iomem *hdm_decoder;
+ int rc;
+
+ /*
+ * Decoder flags are entirely software controlled and therefore this
+ * case is purely a driver bug.
+ */
+ if (dev_WARN_ONCE(&port->dev, (cxld->flags & CXL_DECODER_F_ENABLE) != 0,
+ "Invalid %s enable state\n", dev_name(&cxld->dev)))
+ return -ENXIO;
+
+ cxlps = dev_get_drvdata(&port->dev);
+ hdm_decoder = cxlps->regs.hdm_decoder;
+ ctrl = readl(hdm_decoder + CXL_HDM_DECODER0_CTRL_OFFSET(cxld->id));
+
+ /*
+ * A decoder that's currently active cannot be changed without the
+ * system being quiesced. While the driver should prevent against this,
+ * for a variety of reasons the hardware might not be in sync with the
+ * hardware and so, do not splat on error.
+ */
+ size_hi = readl(hdm_decoder +
+ CXL_HDM_DECODER0_SIZE_HIGH_OFFSET(cxld->id));
+ size_lo =
+ readl(hdm_decoder + CXL_HDM_DECODER0_SIZE_LOW_OFFSET(cxld->id));
+ if (FIELD_GET(CXL_HDM_DECODER0_CTRL_COMMITTED, ctrl) &&
+ (size_lo + size_hi)) {
+ dev_err(&port->dev, "Tried to change an active decoder (%s)\n",
+ dev_name(&cxld->dev));
+ return -EBUSY;
+ }
+
+ u32p_replace_bits(&ctrl, 8 - ilog2(cxld->interleave_granularity),
+ CXL_HDM_DECODER0_CTRL_IG_MASK);
+ u32p_replace_bits(&ctrl, ilog2(cxld->interleave_ways),
+ CXL_HDM_DECODER0_CTRL_IW_MASK);
+ u32p_replace_bits(&ctrl, 1, CXL_HDM_DECODER0_CTRL_COMMIT);
+
+ /* TODO: set based on type */
+ u32p_replace_bits(&ctrl, 1, CXL_HDM_DECODER0_CTRL_TYPE);
+
+ base_lo = FIELD_PREP(GENMASK(31, 28),
+ (u32)(cxld->decoder_range.start & 0xffffffff));
+ base_hi = FIELD_PREP(~0, (u32)(cxld->decoder_range.start >> 32));
+
+ size_lo = (u32)(range_len(&cxld->decoder_range)) & GENMASK(31, 28);
+ size_hi = (u32)((range_len(&cxld->decoder_range) >> 32));
+
+ if (cxld->nr_targets > 0) {
+ tl_lo |= FIELD_PREP(GENMASK(7, 0), cxld->target[0]->port_id);
+ if (cxld->interleave_ways > 1)
+ tl_lo |= FIELD_PREP(GENMASK(15, 8),
+ cxld->target[1]->port_id);
+ if (cxld->interleave_ways > 2)
+ tl_lo |= FIELD_PREP(GENMASK(23, 16),
+ cxld->target[2]->port_id);
+ if (cxld->interleave_ways > 3)
+ tl_lo |= FIELD_PREP(GENMASK(31, 24),
+ cxld->target[3]->port_id);
+ if (cxld->interleave_ways > 4)
+ tl_hi |= FIELD_PREP(GENMASK(7, 0),
+ cxld->target[4]->port_id);
+ if (cxld->interleave_ways > 5)
+ tl_hi |= FIELD_PREP(GENMASK(15, 8),
+ cxld->target[5]->port_id);
+ if (cxld->interleave_ways > 6)
+ tl_hi |= FIELD_PREP(GENMASK(23, 16),
+ cxld->target[6]->port_id);
+ if (cxld->interleave_ways > 7)
+ tl_hi |= FIELD_PREP(GENMASK(31, 24),
+ cxld->target[7]->port_id);
+
+ writel(tl_hi, hdm_decoder + CXL_HDM_DECODER0_TL_HIGH(cxld->id));
+ writel(tl_lo, hdm_decoder + CXL_HDM_DECODER0_TL_LOW(cxld->id));
+ }
+
+ writel(size_hi,
+ hdm_decoder + CXL_HDM_DECODER0_SIZE_HIGH_OFFSET(cxld->id));
+ writel(size_lo,
+ hdm_decoder + CXL_HDM_DECODER0_SIZE_LOW_OFFSET(cxld->id));
+ writel(base_hi,
+ hdm_decoder + CXL_HDM_DECODER0_BASE_HIGH_OFFSET(cxld->id));
+ writel(base_lo,
+ hdm_decoder + CXL_HDM_DECODER0_BASE_LOW_OFFSET(cxld->id));
+ writel(ctrl, hdm_decoder + CXL_HDM_DECODER0_CTRL_OFFSET(cxld->id));
+
+ rc = wait_for_commit(cxld);
+ if (rc)
+ return rc;
+
+ cxld->flags |= CXL_DECODER_F_ENABLE;
+
+#define DPORT_TL_STR "%d %d %d %d %d %d %d %d"
+#define DPORT(i) \
+ (cxld->nr_targets && cxld->interleave_ways > (i)) ? \
+ cxld->target[(i)]->port_id : \
+ -1
+#define DPORT_TL \
+ DPORT(0), DPORT(1), DPORT(2), DPORT(3), DPORT(4), DPORT(5), DPORT(6), \
+ DPORT(7)
+
+ dev_dbg(&port->dev,
+ "%s\n\tBase %pa\n\tSize %llu\n\tIG %u\n\tIW %u\n\tTargetList: " DPORT_TL_STR,
+ dev_name(&cxld->dev), &cxld->decoder_range.start,
+ range_len(&cxld->decoder_range), cxld->interleave_granularity,
+ cxld->interleave_ways, DPORT_TL);
+#undef DPORT_TL
+#undef DPORT
+#undef DPORT_TL_STR
+ return 0;
+}
+EXPORT_SYMBOL_GPL(cxl_commit_decoder);
+
+/**
+ * cxl_disable_decoder() - Disables a decoder
+ * @cxld: The active cxl decoder.
+ *
+ * CXL decoders (as of 2.0 spec) have no way to deactivate them other than to
+ * set the size of the HDM to 0. This function will clear all registers, and if
+ * the decoder is active, commit the 0'd out registers.
+ */
+void cxl_disable_decoder(struct cxl_decoder *cxld)
+{
+ struct cxl_port *port = to_cxl_port(cxld->dev.parent);
+ struct cxl_port_state *cxlps;
+ void __iomem *hdm_decoder;
+ u32 ctrl;
+
+ cxlps = dev_get_drvdata(&port->dev);
+ hdm_decoder = cxlps->regs.hdm_decoder;
+ ctrl = readl(hdm_decoder + CXL_HDM_DECODER0_CTRL_OFFSET(cxld->id));
+
+ if (dev_WARN_ONCE(&port->dev, (cxld->flags & CXL_DECODER_F_ENABLE) == 0,
+ "Invalid decoder enable state\n"))
+ return;
+
+ /* There's no way to "uncommit" a committed decoder, only 0 size it */
+ writel(0, hdm_decoder + CXL_HDM_DECODER0_TL_HIGH(cxld->id));
+ writel(0, hdm_decoder + CXL_HDM_DECODER0_TL_LOW(cxld->id));
+ writel(0, hdm_decoder + CXL_HDM_DECODER0_SIZE_HIGH_OFFSET(cxld->id));
+ writel(0, hdm_decoder + CXL_HDM_DECODER0_SIZE_LOW_OFFSET(cxld->id));
+ writel(0, hdm_decoder + CXL_HDM_DECODER0_BASE_HIGH_OFFSET(cxld->id));
+ writel(0, hdm_decoder + CXL_HDM_DECODER0_BASE_LOW_OFFSET(cxld->id));
+
+ /* If the device isn't actually active, just zero out all the fields */
+ if (FIELD_GET(CXL_HDM_DECODER0_CTRL_COMMITTED, ctrl))
+ writel(CXL_HDM_DECODER0_CTRL_COMMIT,
+ hdm_decoder + CXL_HDM_DECODER0_CTRL_OFFSET(cxld->id));
+}
+EXPORT_SYMBOL_GPL(cxl_disable_decoder);
diff --git a/drivers/cxl/cxl.h b/drivers/cxl/cxl.h
index 79bca9a8246c..587b75f7fa53 100644
--- a/drivers/cxl/cxl.h
+++ b/drivers/cxl/cxl.h
@@ -54,6 +54,7 @@
#define CXL_HDM_DECODER0_CTRL_IW_MASK GENMASK(7, 4)
#define CXL_HDM_DECODER0_CTRL_COMMIT BIT(9)
#define CXL_HDM_DECODER0_CTRL_COMMITTED BIT(10)
+#define CXL_HDM_DECODER0_CTRL_COMMIT_ERROR BIT(11)
#define CXL_HDM_DECODER0_CTRL_TYPE BIT(12)
#define CXL_HDM_DECODER0_TL_LOW(i) (0x20 * (i) + 0x24)
#define CXL_HDM_DECODER0_TL_HIGH(i) (0x20 * (i) + 0x28)
@@ -364,6 +365,8 @@ int devm_cxl_add_dport(struct cxl_port *port, struct device *dport, int port_id,
struct cxl_dport *cxl_find_dport_by_dev(struct cxl_port *port,
const struct device *dev);
struct cxl_port *ep_find_cxl_port(struct cxl_memdev *cxlmd, unsigned int depth);
+int cxl_commit_decoder(struct cxl_decoder *cxld);
+void cxl_disable_decoder(struct cxl_decoder *cxld);
struct cxl_decoder *to_cxl_decoder(struct device *dev);
bool is_cxl_decoder(struct device *dev);
diff --git a/drivers/cxl/region.c b/drivers/cxl/region.c
index 3120b65b0bc5..fd82d37ba573 100644
--- a/drivers/cxl/region.c
+++ b/drivers/cxl/region.c
@@ -580,10 +580,30 @@ static void cleanup_staged_decoders(struct cxl_region *region)
}
}
-static int bind_region(const struct cxl_region *region)
+static int bind_region(struct cxl_region *region)
{
- /* TODO: */
- return 0;
+ struct cxl_decoder *cxld, *d;
+ int rc;
+
+ list_for_each_entry_safe(cxld, d, ®ion->staged_list, region_link) {
+ rc = cxl_commit_decoder(cxld);
+ if (!rc)
+ list_move_tail(&cxld->region_link, ®ion->commit_list);
+ else
+ break;
+ }
+
+ list_for_each_entry_safe(cxld, d, ®ion->commit_list, region_link) {
+ if (rc)
+ cxl_disable_decoder(cxld);
+ list_del(&cxld->region_link);
+ }
+
+ if (rc)
+ cleanup_staged_decoders((struct cxl_region *)region);
+
+ BUG_ON(!list_empty(®ion->staged_list));
+ return rc;
}
static int cxl_region_probe(struct device *dev)
@@ -650,9 +670,22 @@ static int cxl_region_probe(struct device *dev)
return ret;
}
+static void cxl_region_remove(struct device *dev)
+{
+ struct cxl_region *region = to_cxl_region(dev);
+ struct cxl_decoder *cxld, *d;
+
+ list_for_each_entry_safe(cxld, d, ®ion->commit_list, region_link) {
+ cxl_disable_decoder(cxld);
+ list_del(&cxld->region_link);
+ cxl_put_decoder(cxld);
+ }
+}
+
static struct cxl_driver cxl_region_driver = {
.name = "cxl_region",
.probe = cxl_region_probe,
+ .remove = cxl_region_remove,
.id = CXL_DEVICE_REGION,
};
module_cxl_driver(cxl_region_driver);
--
2.34.1
next prev parent reply other threads:[~2022-01-07 0:38 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-07 0:37 [PATCH 00/13] CXL Region driver Ben Widawsky
2022-01-07 0:37 ` [PATCH 01/13] cxl/core: Rename find_cxl_port Ben Widawsky
2022-01-07 0:37 ` [PATCH 02/13] cxl/core: Track port depth Ben Widawsky
2022-01-07 0:37 ` [PATCH 03/13] cxl/region: Add region creation ABI Ben Widawsky
2022-01-07 0:37 ` [PATCH 04/13] cxl/region: Introduce concept of region configuration Ben Widawsky
2022-01-07 0:37 ` [PATCH 05/13] cxl/mem: Cache port created by the mem dev Ben Widawsky
2022-01-07 0:37 ` [PATCH 06/13] cxl/region: Introduce a cxl_region driver Ben Widawsky
2022-01-07 0:37 ` [PATCH 07/13] cxl/acpi: Handle address space allocation Ben Widawsky
2022-01-07 0:37 ` [PATCH 08/13] cxl/region: Address " Ben Widawsky
2022-01-07 0:37 ` [PATCH 09/13] cxl/region: Implement XHB verification Ben Widawsky
2022-01-07 10:07 ` Jonathan Cameron
2022-01-07 11:55 ` Jonathan Cameron
2022-01-11 22:47 ` Ben Widawsky
2022-01-07 10:30 ` Jonathan Cameron
2022-01-07 10:38 ` Jonathan Cameron
2022-01-07 16:32 ` Ben Widawsky
2022-01-11 21:32 ` Ben Widawsky
2022-01-07 0:37 ` [PATCH 10/13] cxl/region: HB port config verification Ben Widawsky
2022-01-07 0:37 ` [PATCH 11/13] cxl/region: Add infrastructure for decoder programming Ben Widawsky
2022-01-07 0:37 ` [PATCH 12/13] cxl/region: Record host bridge target list Ben Widawsky
2022-01-07 18:14 ` Jonathan Cameron
2022-01-07 19:20 ` Dan Williams
2022-01-07 0:37 ` Ben Widawsky [this message]
2022-01-07 16:18 ` [PATCH 13/13] cxl: Program decoders for regions Jonathan Cameron
2022-01-07 16:33 ` Ben Widawsky
2022-01-07 17:22 ` Jonathan Cameron
2022-01-11 0:05 ` Ben Widawsky
2022-01-12 14:53 ` Jonathan Cameron
2022-01-12 16:54 ` Ben Widawsky
2022-01-15 18:54 ` [PATCH 00/13] CXL Region driver Ben Widawsky
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220107003756.806582-14-ben.widawsky@intel.com \
--to=ben.widawsky@intel.com \
--cc=Jonathan.Cameron@Huawei.com \
--cc=alison.schofield@intel.com \
--cc=dan.j.williams@intel.com \
--cc=helgaas@kernel.org \
--cc=ira.weiny@intel.com \
--cc=linux-cxl@vger.kernel.org \
--cc=linux-nvdimm@lists.01.org \
--cc=linux-pci@vger.kernel.org \
--cc=patches@lists.linux.dev \
--cc=vishal.l.verma@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox