Linux CXL
 help / color / mirror / Atom feed
From: Jonathan Cameron <Jonathan.Cameron@huawei.com>
To: <linuxarm@huawei.com>, <qemu-devel@nongnu.org>,
	<alex.bennee@linaro.org>, Marcel Apfelbaum <marcel@redhat.com>,
	"Michael S . Tsirkin" <mst@redhat.com>,
	Igor Mammedov <imammedo@redhat.com>,
	Markus Armbruster <armbru@redhat.com>,
	Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>,
	Adam Manzanares <a.manzanares@samsung.com>,
	Tong Zhang <ztong0001@gmail.com>
Cc: <linux-cxl@vger.kernel.org>,
	Ben Widawsky <ben.widawsky@intel.com>,
	"Peter Maydell" <peter.maydell@linaro.org>,
	Shameerali Kolothum Thodi  <shameerali.kolothum.thodi@huawei.com>,
	<f4bug@amsat.org>, Peter Xu <peterx@redhat.com>,
	David Hildenbrand <david@redhat.com>,
	Paolo Bonzini <pbonzini@redhat.com>,
	Saransh Gupta1 <saransh@ibm.com>,
	Shreyas Shah <shreyas.shah@elastics.cloud>,
	Chris Browy <cbrowy@avery-design.com>,
	"Samarth Saxena" <samarths@cadence.com>,
	Dan Williams <dan.j.williams@intel.com>, <k.jensen@samsung.com>,
	<dave@stgolabs.net>,
	Alison Schofield <alison.schofield@intel.com>
Subject: [PATCH v10 23/45] hw/cxl/component: Implement host bridge MMIO (8.2.5, table 142)
Date: Fri, 29 Apr 2022 15:40:48 +0100	[thread overview]
Message-ID: <20220429144110.25167-24-Jonathan.Cameron@huawei.com> (raw)
In-Reply-To: <20220429144110.25167-1-Jonathan.Cameron@huawei.com>

From: Ben Widawsky <ben.widawsky@intel.com>

CXL host bridges themselves may have MMIO. Since host bridges don't have
a BAR they are treated as special for MMIO.  This patch includes
i386/pc support.
Also hook up the device reset now that we have have the MMIO
space in which the results are visible.

Note that we duplicate the PCI express case for the aml_build but
the implementations will diverge when the CXL specific _OSC is
introduced.

Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Co-developed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
---
 hw/i386/acpi-build.c                | 25 ++++++++++-
 hw/i386/pc.c                        | 27 +++++++++++-
 hw/pci-bridge/pci_expander_bridge.c | 66 ++++++++++++++++++++++++++---
 include/hw/cxl/cxl.h                | 14 ++++++
 4 files changed, 122 insertions(+), 10 deletions(-)

diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c
index dcf6ece3d0..2d81b0f40c 100644
--- a/hw/i386/acpi-build.c
+++ b/hw/i386/acpi-build.c
@@ -28,6 +28,7 @@
 #include "qemu/bitmap.h"
 #include "qemu/error-report.h"
 #include "hw/pci/pci.h"
+#include "hw/cxl/cxl.h"
 #include "hw/core/cpu.h"
 #include "target/i386/cpu.h"
 #include "hw/misc/pvpanic.h"
@@ -1572,10 +1573,21 @@ build_dsdt(GArray *table_data, BIOSLinker *linker,
             }
 
             scope = aml_scope("\\_SB");
-            dev = aml_device("PC%.02X", bus_num);
+
+            if (pci_bus_is_cxl(bus)) {
+                dev = aml_device("CL%.02X", bus_num);
+            } else {
+                dev = aml_device("PC%.02X", bus_num);
+            }
             aml_append(dev, aml_name_decl("_UID", aml_int(bus_num)));
             aml_append(dev, aml_name_decl("_BBN", aml_int(bus_num)));
-            if (pci_bus_is_express(bus)) {
+            if (pci_bus_is_cxl(bus)) {
+                aml_append(dev, aml_name_decl("_HID", aml_eisaid("PNP0A08")));
+                aml_append(dev, aml_name_decl("_CID", aml_eisaid("PNP0A03")));
+
+                /* Expander bridges do not have ACPI PCI Hot-plug enabled */
+                aml_append(dev, build_q35_osc_method(true));
+            } else if (pci_bus_is_express(bus)) {
                 aml_append(dev, aml_name_decl("_HID", aml_eisaid("PNP0A08")));
                 aml_append(dev, aml_name_decl("_CID", aml_eisaid("PNP0A03")));
 
@@ -1595,6 +1607,15 @@ build_dsdt(GArray *table_data, BIOSLinker *linker,
             aml_append(dev, aml_name_decl("_CRS", crs));
             aml_append(scope, dev);
             aml_append(dsdt, scope);
+
+            /* Handle the ranges for the PXB expanders */
+            if (pci_bus_is_cxl(bus)) {
+                MemoryRegion *mr = &machine->cxl_devices_state->host_mr;
+                uint64_t base = mr->addr;
+
+                crs_range_insert(crs_range_set.mem_ranges, base,
+                                 base + memory_region_size(mr) - 1);
+            }
         }
     }
 
diff --git a/hw/i386/pc.c b/hw/i386/pc.c
index b752339beb..b56af1e4e7 100644
--- a/hw/i386/pc.c
+++ b/hw/i386/pc.c
@@ -75,6 +75,7 @@
 #include "acpi-build.h"
 #include "hw/mem/pc-dimm.h"
 #include "hw/mem/nvdimm.h"
+#include "hw/cxl/cxl.h"
 #include "qapi/error.h"
 #include "qapi/qapi-visit-common.h"
 #include "qapi/qapi-visit-machine.h"
@@ -816,6 +817,7 @@ void pc_memory_init(PCMachineState *pcms,
     MachineClass *mc = MACHINE_GET_CLASS(machine);
     PCMachineClass *pcmc = PC_MACHINE_GET_CLASS(pcms);
     X86MachineState *x86ms = X86_MACHINE(pcms);
+    hwaddr cxl_base;
 
     assert(machine->ram_size == x86ms->below_4g_mem_size +
                                 x86ms->above_4g_mem_size);
@@ -905,6 +907,26 @@ void pc_memory_init(PCMachineState *pcms,
                                     &machine->device_memory->mr);
     }
 
+    if (machine->cxl_devices_state->is_enabled) {
+        MemoryRegion *mr = &machine->cxl_devices_state->host_mr;
+        hwaddr cxl_size = MiB;
+
+        if (pcmc->has_reserved_memory && machine->device_memory->base) {
+            cxl_base = machine->device_memory->base;
+            if (!pcmc->broken_reserved_end) {
+                cxl_base += memory_region_size(&machine->device_memory->mr);
+            }
+        } else if (pcms->sgx_epc.size != 0) {
+            cxl_base = sgx_epc_above_4g_end(&pcms->sgx_epc);
+        } else {
+            cxl_base = 0x100000000ULL + x86ms->above_4g_mem_size;
+        }
+
+        e820_add_entry(cxl_base, cxl_size, E820_RESERVED);
+        memory_region_init(mr, OBJECT(machine), "cxl_host_reg", cxl_size);
+        memory_region_add_subregion(system_memory, cxl_base, mr);
+    }
+
     /* Initialize PC system firmware */
     pc_system_firmware_init(pcms, rom_memory);
 
@@ -965,7 +987,10 @@ uint64_t pc_pci_hole64_start(void)
     X86MachineState *x86ms = X86_MACHINE(pcms);
     uint64_t hole64_start = 0;
 
-    if (pcmc->has_reserved_memory && ms->device_memory->base) {
+    if (ms->cxl_devices_state->host_mr.addr) {
+        hole64_start = ms->cxl_devices_state->host_mr.addr +
+            memory_region_size(&ms->cxl_devices_state->host_mr);
+    } else if (pcmc->has_reserved_memory && ms->device_memory->base) {
         hole64_start = ms->device_memory->base;
         if (!pcmc->broken_reserved_end) {
             hole64_start += memory_region_size(&ms->device_memory->mr);
diff --git a/hw/pci-bridge/pci_expander_bridge.c b/hw/pci-bridge/pci_expander_bridge.c
index f762eb4a6e..8fb4f2ea91 100644
--- a/hw/pci-bridge/pci_expander_bridge.c
+++ b/hw/pci-bridge/pci_expander_bridge.c
@@ -61,12 +61,6 @@ DECLARE_INSTANCE_CHECKER(PXBDev, PXB_PCIE_DEV,
 DECLARE_INSTANCE_CHECKER(PXBDev, PXB_CXL_DEV,
                          TYPE_PXB_CXL_DEVICE)
 
-typedef struct CXLHost {
-    PCIHostState parent_obj;
-
-    CXLComponentState cxl_cstate;
-} CXLHost;
-
 struct PXBDev {
     /*< private >*/
     PCIDevice parent_obj;
@@ -75,6 +69,9 @@ struct PXBDev {
     uint8_t bus_nr;
     uint16_t numa_node;
     bool bypass_iommu;
+    struct cxl_dev {
+        CXLHost *cxl_host_bridge;
+    } cxl;
 };
 
 static PXBDev *convert_to_pxb(PCIDevice *dev)
@@ -197,6 +194,52 @@ static const TypeInfo pxb_host_info = {
     .class_init    = pxb_host_class_init,
 };
 
+static void pxb_cxl_realize(DeviceState *dev, Error **errp)
+{
+    MachineState *ms = MACHINE(qdev_get_machine());
+    SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
+    CXLHost *cxl = PXB_CXL_HOST(dev);
+    CXLComponentState *cxl_cstate = &cxl->cxl_cstate;
+    struct MemoryRegion *mr = &cxl_cstate->crb.component_registers;
+    hwaddr offset;
+
+    cxl_component_register_block_init(OBJECT(dev), cxl_cstate,
+                                      TYPE_PXB_CXL_HOST);
+    sysbus_init_mmio(sbd, mr);
+
+    offset = memory_region_size(mr) * ms->cxl_devices_state->next_mr_idx;
+    if (offset > memory_region_size(&ms->cxl_devices_state->host_mr)) {
+        error_setg(errp, "Insufficient space for pxb cxl host register space");
+        return;
+    }
+
+    memory_region_add_subregion(&ms->cxl_devices_state->host_mr, offset, mr);
+    ms->cxl_devices_state->next_mr_idx++;
+}
+
+static void pxb_cxl_host_class_init(ObjectClass *class, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(class);
+    PCIHostBridgeClass *hc = PCI_HOST_BRIDGE_CLASS(class);
+
+    hc->root_bus_path = pxb_host_root_bus_path;
+    dc->fw_name = "cxl";
+    dc->realize = pxb_cxl_realize;
+    /* Reason: Internal part of the pxb/pxb-pcie device, not usable by itself */
+    dc->user_creatable = false;
+}
+
+/*
+ * This is a device to handle the MMIO for a CXL host bridge. It does nothing
+ * else.
+ */
+static const TypeInfo cxl_host_info = {
+    .name          = TYPE_PXB_CXL_HOST,
+    .parent        = TYPE_PCI_HOST_BRIDGE,
+    .instance_size = sizeof(CXLHost),
+    .class_init    = pxb_cxl_host_class_init,
+};
+
 /*
  * Registers the PXB bus as a child of pci host root bus.
  */
@@ -245,6 +288,13 @@ static int pxb_map_irq_fn(PCIDevice *pci_dev, int pin)
 
 static void pxb_dev_reset(DeviceState *dev)
 {
+    CXLHost *cxl = PXB_CXL_DEV(dev)->cxl.cxl_host_bridge;
+    CXLComponentState *cxl_cstate = &cxl->cxl_cstate;
+    uint32_t *reg_state = cxl_cstate->crb.cache_mem_registers;
+    uint32_t *write_msk = cxl_cstate->crb.cache_mem_regs_write_mask;
+
+    cxl_component_register_init_common(reg_state, write_msk, CXL2_ROOT_PORT);
+    ARRAY_FIELD_DP32(reg_state, CXL_HDM_DECODER_CAPABILITY, TARGET_COUNT, 8);
 }
 
 static gint pxb_compare(gconstpointer a, gconstpointer b)
@@ -281,12 +331,13 @@ static void pxb_dev_realize_common(PCIDevice *dev, enum BusType type,
         dev_name = dev->qdev.id;
     }
 
-    ds = qdev_new(TYPE_PXB_HOST);
+    ds = qdev_new(type == CXL ? TYPE_PXB_CXL_HOST : TYPE_PXB_HOST);
     if (type == PCIE) {
         bus = pci_root_bus_new(ds, dev_name, NULL, NULL, 0, TYPE_PXB_PCIE_BUS);
     } else if (type == CXL) {
         bus = pci_root_bus_new(ds, dev_name, NULL, NULL, 0, TYPE_PXB_CXL_BUS);
         bus->flags |= PCI_BUS_CXL;
+        PXB_CXL_DEV(dev)->cxl.cxl_host_bridge = PXB_CXL_HOST(ds);
     } else {
         bus = pci_root_bus_new(ds, "pxb-internal", NULL, NULL, 0, TYPE_PXB_BUS);
         bds = qdev_new("pci-bridge");
@@ -475,6 +526,7 @@ static void pxb_register_types(void)
     type_register_static(&pxb_pcie_bus_info);
     type_register_static(&pxb_cxl_bus_info);
     type_register_static(&pxb_host_info);
+    type_register_static(&cxl_host_info);
     type_register_static(&pxb_dev_info);
     type_register_static(&pxb_pcie_dev_info);
     type_register_static(&pxb_cxl_dev_info);
diff --git a/include/hw/cxl/cxl.h b/include/hw/cxl/cxl.h
index 31af92fd5e..8d1a7245d0 100644
--- a/include/hw/cxl/cxl.h
+++ b/include/hw/cxl/cxl.h
@@ -10,6 +10,7 @@
 #ifndef CXL_H
 #define CXL_H
 
+#include "hw/pci/pci_host.h"
 #include "cxl_pci.h"
 #include "cxl_component.h"
 #include "cxl_device.h"
@@ -17,8 +18,21 @@
 #define CXL_COMPONENT_REG_BAR_IDX 0
 #define CXL_DEVICE_REG_BAR_IDX 2
 
+#define CXL_WINDOW_MAX 10
+
 typedef struct CXLState {
     bool is_enabled;
+    MemoryRegion host_mr;
+    unsigned int next_mr_idx;
 } CXLState;
 
+struct CXLHost {
+    PCIHostState parent_obj;
+
+    CXLComponentState cxl_cstate;
+};
+
+#define TYPE_PXB_CXL_HOST "pxb-cxl-host"
+OBJECT_DECLARE_SIMPLE_TYPE(CXLHost, PXB_CXL_HOST)
+
 #endif
-- 
2.32.0


  parent reply	other threads:[~2022-04-29 14:53 UTC|newest]

Thread overview: 52+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-04-29 14:40 [PATCH v10 00/45] CXl 2.0 emulation Support Jonathan Cameron
2022-04-29 14:40 ` [PATCH v10 01/45] hw/pci/cxl: Add a CXL component type (interface) Jonathan Cameron
2022-04-29 14:40 ` [PATCH v10 02/45] hw/cxl/component: Introduce CXL components (8.1.x, 8.2.5) Jonathan Cameron
2022-05-30 17:50   ` Jonathan Cameron
2022-04-29 14:40 ` [PATCH v10 03/45] MAINTAINERS: Add entry for Compute Express Link Emulation Jonathan Cameron
2022-04-29 14:40 ` [PATCH v10 04/45] hw/cxl/device: Introduce a CXL device (8.2.8) Jonathan Cameron
2022-04-29 14:40 ` [PATCH v10 05/45] hw/cxl/device: Implement the CAP array (8.2.8.1-2) Jonathan Cameron
2022-04-29 14:40 ` [PATCH v10 06/45] hw/cxl/device: Implement basic mailbox (8.2.8.4) Jonathan Cameron
2022-04-29 14:40 ` [PATCH v10 07/45] hw/cxl/device: Add memory device utilities Jonathan Cameron
2022-04-29 14:40 ` [PATCH v10 08/45] hw/cxl/device: Add cheap EVENTS implementation (8.2.9.1) Jonathan Cameron
2022-04-29 14:40 ` [PATCH v10 09/45] hw/cxl/device: Timestamp implementation (8.2.9.3) Jonathan Cameron
2022-04-29 14:40 ` [PATCH v10 10/45] hw/cxl/device: Add log commands (8.2.9.4) + CEL Jonathan Cameron
2022-04-29 14:40 ` [PATCH v10 11/45] hw/pxb: Use a type for realizing expanders Jonathan Cameron
2022-04-29 14:40 ` [PATCH v10 12/45] hw/pci/cxl: Create a CXL bus type Jonathan Cameron
2022-04-29 14:40 ` [PATCH v10 13/45] cxl: Machine level control on whether CXL support is enabled Jonathan Cameron
2022-05-21  9:11   ` Paolo Bonzini
2022-04-29 14:40 ` [PATCH v10 14/45] hw/pxb: Allow creation of a CXL PXB (host bridge) Jonathan Cameron
2022-04-29 14:40 ` [PATCH v10 15/45] qtest/cxl: Introduce initial test for pxb-cxl only Jonathan Cameron
2022-04-29 14:40 ` [PATCH v10 16/45] hw/cxl/rp: Add a root port Jonathan Cameron
2022-04-29 14:40 ` [PATCH v10 17/45] hw/cxl/device: Add a memory device (8.2.8.5) Jonathan Cameron
2023-09-13 12:20   ` Philippe Mathieu-Daudé
2022-04-29 14:40 ` [PATCH v10 18/45] hw/cxl/device: Implement MMIO HDM decoding (8.2.5.12) Jonathan Cameron
2022-04-29 14:40 ` [PATCH v10 19/45] hw/cxl/device: Add some trivial commands Jonathan Cameron
2022-04-29 14:40 ` [PATCH v10 20/45] hw/cxl/device: Plumb real Label Storage Area (LSA) sizing Jonathan Cameron
2022-04-29 14:40 ` [PATCH v10 21/45] hw/cxl/device: Implement get/set Label Storage Area (LSA) Jonathan Cameron
2022-04-29 14:40 ` [PATCH v10 22/45] qtests/cxl: Add initial root port and CXL type3 tests Jonathan Cameron
2022-04-29 14:40 ` Jonathan Cameron [this message]
2022-04-29 14:40 ` [PATCH v10 24/45] acpi/cxl: Add _OSC implementation (9.14.2) Jonathan Cameron
2022-04-29 14:40 ` [PATCH v10 25/45] acpi/cxl: Create the CEDT (9.14.1) Jonathan Cameron
2022-04-29 14:40 ` [PATCH v10 26/45] hw/cxl/component: Add utils for interleave parameter encoding/decoding Jonathan Cameron
2022-04-29 14:40 ` [PATCH v10 27/45] hw/cxl/host: Add support for CXL Fixed Memory Windows Jonathan Cameron
2022-05-21  9:07   ` Paolo Bonzini
2022-05-23 15:15     ` Jonathan Cameron
2022-04-29 14:40 ` [PATCH v10 28/45] acpi/cxl: Introduce CFMWS structures in CEDT Jonathan Cameron
2022-04-29 14:40 ` [PATCH v10 29/45] hw/pci-host/gpex-acpi: Add support for dsdt construction for pxb-cxl Jonathan Cameron
2022-04-29 14:40 ` [PATCH v10 30/45] pci/pcie_port: Add pci_find_port_by_pn() Jonathan Cameron
2022-04-29 14:40 ` [PATCH v10 31/45] CXL/cxl_component: Add cxl_get_hb_cstate() Jonathan Cameron
2022-04-29 14:40 ` [PATCH v10 32/45] mem/cxl_type3: Add read and write functions for associated hostmem Jonathan Cameron
2022-04-29 14:40 ` [PATCH v10 33/45] cxl/cxl-host: Add memops for CFMWS region Jonathan Cameron
2022-04-29 14:40 ` [PATCH v10 34/45] hw/cxl/component Add a dumb HDM decoder handler Jonathan Cameron
2022-04-29 14:41 ` [PATCH v10 35/45] i386/pc: Enable CXL fixed memory windows Jonathan Cameron
2022-04-29 14:41 ` [PATCH v10 36/45] tests/acpi: q35: Allow addition of a CXL test Jonathan Cameron
2022-04-29 14:41 ` [PATCH v10 37/45] qtests/bios-tables-test: Add a test for CXL emulation Jonathan Cameron
2022-04-29 14:41 ` [PATCH v10 38/45] tests/acpi: Add tables " Jonathan Cameron
2022-04-29 14:41 ` [PATCH v10 39/45] qtest/cxl: Add more complex test cases with CFMWs Jonathan Cameron
2022-04-29 14:41 ` [PATCH v10 40/45] hw/arm/virt: Basic CXL enablement on pci_expander_bridge instances pxb-cxl Jonathan Cameron
2022-04-29 14:41 ` [PATCH v10 41/45] qtest/cxl: Add aarch64 virt test for CXL Jonathan Cameron
2022-04-29 14:41 ` [PATCH v10 42/45] docs/cxl: Add initial Compute eXpress Link (CXL) documentation Jonathan Cameron
2022-04-29 14:41 ` [PATCH v10 43/45] pci-bridge/cxl_upstream: Add a CXL switch upstream port Jonathan Cameron
2022-04-29 14:41 ` [PATCH v10 44/45] pci-bridge/cxl_downstream: Add a CXL switch downstream port Jonathan Cameron
2022-04-29 14:41 ` [PATCH v10 45/45] docs/cxl: Add switch documentation Jonathan Cameron
2022-05-13 10:16 ` [PATCH v10 00/45] CXl 2.0 emulation Support Michael S. Tsirkin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220429144110.25167-24-Jonathan.Cameron@huawei.com \
    --to=jonathan.cameron@huawei.com \
    --cc=a.manzanares@samsung.com \
    --cc=alex.bennee@linaro.org \
    --cc=alison.schofield@intel.com \
    --cc=armbru@redhat.com \
    --cc=ben.widawsky@intel.com \
    --cc=cbrowy@avery-design.com \
    --cc=dan.j.williams@intel.com \
    --cc=dave@stgolabs.net \
    --cc=david@redhat.com \
    --cc=f4bug@amsat.org \
    --cc=imammedo@redhat.com \
    --cc=k.jensen@samsung.com \
    --cc=linux-cxl@vger.kernel.org \
    --cc=linuxarm@huawei.com \
    --cc=marcel@redhat.com \
    --cc=mark.cave-ayland@ilande.co.uk \
    --cc=mst@redhat.com \
    --cc=pbonzini@redhat.com \
    --cc=peter.maydell@linaro.org \
    --cc=peterx@redhat.com \
    --cc=qemu-devel@nongnu.org \
    --cc=samarths@cadence.com \
    --cc=saransh@ibm.com \
    --cc=shameerali.kolothum.thodi@huawei.com \
    --cc=shreyas.shah@elastics.cloud \
    --cc=ztong0001@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox