From: Terry Bowman <terry.bowman@amd.com>
To: <alison.schofield@intel.com>, <vishal.l.verma@intel.com>,
<ira.weiny@intel.com>, <bwidawsk@kernel.org>,
<dan.j.williams@intel.com>, <dave.jiang@intel.com>,
<Jonathan.Cameron@huawei.com>, <linux-cxl@vger.kernel.org>
Cc: <terry.bowman@amd.com>, <rrichter@amd.com>,
<linux-kernel@vger.kernel.org>, <bhelgaas@google.com>
Subject: [PATCH v10 05/15] cxl/pci: Remove Component Register base address from struct cxl_dev_state
Date: Thu, 31 Aug 2023 10:20:21 -0500 [thread overview]
Message-ID: <20230831152031.184295-6-terry.bowman@amd.com> (raw)
In-Reply-To: <20230831152031.184295-1-terry.bowman@amd.com>
From: Robert Richter <rrichter@amd.com>
The Component Register base address @component_reg_phys is no longer
used after the rework of the Component Register setup which now uses
struct member @comp_map instead. Remove the base address.
Signed-off-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
---
drivers/cxl/cxlmem.h | 2 --
drivers/cxl/mem.c | 4 ++--
drivers/cxl/pci.c | 3 ---
tools/testing/cxl/test/mem.c | 1 -
4 files changed, 2 insertions(+), 8 deletions(-)
diff --git a/drivers/cxl/cxlmem.h b/drivers/cxl/cxlmem.h
index 607ee34b0ce7..fdfa6e5dd739 100644
--- a/drivers/cxl/cxlmem.h
+++ b/drivers/cxl/cxlmem.h
@@ -390,7 +390,6 @@ enum cxl_devtype {
* @dpa_res: Overall DPA resource tree for the device
* @pmem_res: Active Persistent memory capacity configuration
* @ram_res: Active Volatile memory capacity configuration
- * @component_reg_phys: register base of component registers
* @serial: PCIe Device Serial Number
* @type: Generic Memory Class device or Vendor Specific Memory device
*/
@@ -405,7 +404,6 @@ struct cxl_dev_state {
struct resource dpa_res;
struct resource pmem_res;
struct resource ram_res;
- resource_size_t component_reg_phys;
u64 serial;
enum cxl_devtype type;
};
diff --git a/drivers/cxl/mem.c b/drivers/cxl/mem.c
index 317c7548e4e9..3af3218ebe0e 100644
--- a/drivers/cxl/mem.c
+++ b/drivers/cxl/mem.c
@@ -49,7 +49,6 @@ static int devm_cxl_add_endpoint(struct device *host, struct cxl_memdev *cxlmd,
struct cxl_dport *parent_dport)
{
struct cxl_port *parent_port = parent_dport->port;
- struct cxl_dev_state *cxlds = cxlmd->cxlds;
struct cxl_port *endpoint, *iter, *down;
int rc;
@@ -65,8 +64,9 @@ static int devm_cxl_add_endpoint(struct device *host, struct cxl_memdev *cxlmd,
ep->next = down;
}
+ /* The Endpoint's component regs are located in cxlds. */
endpoint = devm_cxl_add_port(host, &cxlmd->dev,
- cxlds->component_reg_phys,
+ CXL_RESOURCE_NONE,
parent_dport);
if (IS_ERR(endpoint))
return PTR_ERR(endpoint);
diff --git a/drivers/cxl/pci.c b/drivers/cxl/pci.c
index f8ad601b314e..b71f1c7d16ce 100644
--- a/drivers/cxl/pci.c
+++ b/drivers/cxl/pci.c
@@ -835,7 +835,6 @@ static int cxl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
* If the component registers can't be found, the cxl_pci driver may
* still be useful for management functions so don't return an error.
*/
- cxlds->component_reg_phys = CXL_RESOURCE_NONE;
rc = cxl_pci_setup_regs(pdev, CXL_REGLOC_RBI_COMPONENT,
&cxlds->comp_map);
if (rc)
@@ -843,8 +842,6 @@ static int cxl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
else if (!cxlds->comp_map.component_map.ras.valid)
dev_dbg(&pdev->dev, "RAS registers not found\n");
- cxlds->component_reg_phys = cxlds->comp_map.resource;
-
rc = cxl_map_component_regs(&cxlds->comp_map, cxlds->dev,
&cxlds->regs.component,
BIT(CXL_CM_CAP_CAP_ID_RAS));
diff --git a/tools/testing/cxl/test/mem.c b/tools/testing/cxl/test/mem.c
index 464fc39ed277..aa44d111fd28 100644
--- a/tools/testing/cxl/test/mem.c
+++ b/tools/testing/cxl/test/mem.c
@@ -1423,7 +1423,6 @@ static int cxl_mock_mem_probe(struct platform_device *pdev)
cxlds->serial = pdev->id;
if (is_rcd(pdev)) {
cxlds->rcd = true;
- cxlds->component_reg_phys = CXL_RESOURCE_NONE;
}
rc = cxl_enumerate_cmds(mds);
--
2.34.1
next prev parent reply other threads:[~2023-08-31 15:22 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-08-31 15:20 [PATCH v10 00/15] cxl/pci: Add support for RCH RAS error handling Terry Bowman
2023-08-31 15:20 ` [PATCH v10 01/15] cxl/port: Pre-initialize component register mappings Terry Bowman
2023-08-31 15:20 ` [PATCH v10 02/15] cxl/regs: Prepare for multiple users of " Terry Bowman
2023-09-01 9:15 ` Jonathan Cameron
2023-09-02 13:54 ` Robert Richter
2023-08-31 15:20 ` [PATCH v10 03/15] cxl/pci: Store the endpoint's Component Register mappings in struct cxl_dev_state Terry Bowman
2023-08-31 15:20 ` [PATCH v10 04/15] cxl/hdm: Use stored Component Register mappings to map HDM decoder capability Terry Bowman
2023-08-31 18:34 ` Dan Williams
2023-09-15 0:15 ` Dan Williams
2023-09-15 21:53 ` Robert Richter
2023-09-15 22:54 ` Dan Williams
2023-08-31 15:20 ` Terry Bowman [this message]
2023-08-31 15:20 ` [PATCH v10 06/15] cxl/port: Remove Component Register base address from struct cxl_port Terry Bowman
2023-08-31 15:20 ` [PATCH v10 07/15] cxl/pci: Add RCH downstream port AER register discovery Terry Bowman
2023-08-31 18:51 ` Dan Williams
2023-09-05 16:55 ` Terry Bowman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230831152031.184295-6-terry.bowman@amd.com \
--to=terry.bowman@amd.com \
--cc=Jonathan.Cameron@huawei.com \
--cc=alison.schofield@intel.com \
--cc=bhelgaas@google.com \
--cc=bwidawsk@kernel.org \
--cc=dan.j.williams@intel.com \
--cc=dave.jiang@intel.com \
--cc=ira.weiny@intel.com \
--cc=linux-cxl@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=rrichter@amd.com \
--cc=vishal.l.verma@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox